[SOLVED] MMIC 2.0 (3i): launch of Console KVM fails

Similar Questions

• Launch of console KVM issue

  I have a c220 M3 UCS where I try to install on the HV. The current version on the CIMC is 1.4.6. While on the MMIC, I hit the "launch KVM Console", but the KVM does not start, the only answer I get (using Google Chrome) is that I get a viewer.jnpl file and ([email protected]/ * / @1350949862108) beside him. I tried using Firefox and IE and exhibit the same problem. I've also updated my version of java to the current version.

  Any ideas as to what I'm not doing correctly? Thanks in advance.

  Hi JL

  You will find that the file extension is not just JNLP but jnlp (10.22.xx.xx, etc).

  Navigate to the file and rename it just so that it's simply viewer.jnlp and you'll be fine.

  Thank you

  David Grocke

• Error UCS Manager Console KVM to open after Java Update

  After the upgrade to version 1.7_21 Java I tried to access the KVM console from within the UCS Manager (v2.1 (1 d)) and get the error message:

  "Cannot run the program"C:\\Program": CreateProcess = 2 error, the system cannot find the file specified."

  I tried to remove installed applications and applets as well as temporary files from the Java console inside, but it does not solve the problem. We also tried to launch the console KVM in KVM Manager and that works very well. Everything works correctly when you run Java 1.7_17.

  Everyone knows about this problem since upgrade to 1.7_21?

  Thank you.

  In the meantime, you can install Java in a directory path that has no space to work around the problem. For example: c:\Java\jre7

  This will give you access KVM again.

• tab KVM and vm is not available in the console kvm the Mmic

  Hi guy,

  Nice day!

  Today, I spend all day looking for the solution to this, but it was a bad day for me. I have access to the server cisco UCS 220 M3 Mmic and when I clicked the button on console kvm on the page group MMIC, the kvm and vm tab does not appear on the console kvm page. When I clicked on the virtual media in the menu, it's only to create image and enable vm media, there is no "Add images" option available for me to download the ISO image of vmware on the server.

  I tried to update the firmware for MMIC and BIOS, but no luck for me. Grateful if someone can help me with that!

  Attached is the retail version MMIC to share with you

  Thank you

  Rabah

  When you click on activate do you see a check mark next to it (see attached screenshot)?

  Try to do a cycle of the power of the box by removing the cables for power for about 3 minutes.

  Have you tried different computers?

• iDRAC 7 launch Virtual Console fails with access denied error

  Hello

  whenever I try to launch the idrac video console 7, it fails with an "Access denied" error it's weird because I'm connected to the idrac as superuser. I use JDK 1.6. I tried through different browsers and I still get the same error.

  Found the same problem after an update of the Firmware to iDRAC.

  To address I created a new user account and permissions of base. Seems "Access Virtual Console" even when checked permissions do not actually post update.

• KVM console - connection failed

  Hello

  I am trying to connect to the KVM Console but I get "connection failed".

  I read the other posts in the forum with the same problem but I can't solve it.

  Can someone help me?

  Thank you.

  Well, in my experience, this new version of Java have some security settings that are very strict and very different in relation to the old version of Java.

  So I recommend that you completely uninstall this version of Java and try again with an older version - IE 1.7 or 1.6 on this machine.

  If you have proper network connectivity to the MMIC - KVM console should work without problem.

  HTH,

  Dragan

• The "Console" tab fails on servers on a host ESX Server 3.5.0

  Hello

  On one of our server VMware ESX 3.5.0 123630 hosts, I get an error message when I try to use the "Console" tab on the servers located on the ESX Server.

  The error message "unable to connect to the host esx006.sb.local: a connection attempt fails, because the connected party did not properly after a period or the connection failed because the connected host has failed."

  This ESX Server is configured as all the other ESX servers in our environment, so I don't understand why it does not work on the ESX Server.

  I have no problems connecting to the ESX Server and I have no problems connecting to servers through the mstsc.

  I have the following VMware Infrastructure customers installed on my computer:

  -VMware Infrastructure Client 2.5

  -VMware Virtual Infrastructure Client 2.0

  -VMware vSphere Client 4.1

  To connect to the above mensioned ESX Server, I use the client "VMware Infrastructure Client, Version 2.5.0 Build 147704".

  Can you help me solve this mystery?

  Kind regards

  Carl-Marius

  Hi still =)

  Sorry, that you're still having problems... I hope that we will get there in the end!

  In any case, take a look at the following site, there is a solution out there that can help (it's certainly worked for several!) people who added to comments

  Please try this and let me know how you go.

  See you soon

  Waffle

• Cannot connect on 12 C Console - AUTHENTICATION FAILED

  After the upgrade of 12.1.0.2 WHO, it was working fine. Today, suddenly had trouble connecting.
  No one touched the credentials. Someone please help me solve this problem, because it the effects of the follow-up.
  
  Let me know if additional information is needed.
  
  -Paul

  Hello

  Please check the value defined on job_queue_processes.

  If the value is set to 0, please set a value other than zero and check.

  Thank you
  Vincent

• Error launching runInstaller after a failed installation

  Hello world
  
  I need to install the control grid on RHEL 5. I made the changes to resolve compatibility issues (IE change the redhat-release file and download the appropriate PMR) then I installed the grid control using a new database with the runInstaller.
  
  Everything seemed to go ok, but at the end of installation, I don't have the final panel which gives various information such as the url to connect to the server. I checked the logs, and it is said that the installation of grid control has been successful. In any case, cannot access my server by http://NomServeur/em (I looked for the correct port in OMS_HOME/install/portlist.ini)
  
  I tried to run the runInstaller once more and received the message:
  * "' There was an error detected with adjustment of a String index out of range:-1 during the treatment of silent response = null file" * "
  
  Someone has an idea of what I could do?
  Thank you
  
  Published by: user11218060 on June 1, 2009 03:14

  Check the following process
  ps - ef | grep opmn
  ps - ef | grep agent
  ps - ef | grep EM
  ps - ef | ora_ grep

• FaceTime does not.

  Hello

  I recently had this MBA 13 "and after using it for a few days, I found that FaceTime unresponsive. Whenever I try to open FaceTime it shows "app does not. So I have to force it out every time. I had talked to apple support two or three times for this issues and does so to try to resolve this thing.

  1 rebooted Mac several times

  2. first aid normal recovery mode / First aid - all ok

  3 reset SMC

  4 reset the NVRAM

  I've covered a lot of things to deal with, but the result is the same. It does not at all, and it gets really annoying to me. If someone can please help me to solve this will be great. As with the Apple support I don't see a glimmer of hope to solve this.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• vSphere Client console do not launch under Win7 x 64

  
  Could not launch a console vsphere client vsphere 5.1/5.5.  Error "unable to connect to the mks: unable to connect to the server XXXXX:902.  It's a new job that I try to run it on and I turned off the firewall and checked the availability of port 902 and 903, so I am at a loss as to why it does not work.  Also have had problems with this work station and connections to get help from the stand-alone converter program.  Not sure if there is an overlap in the ports or features that may result from the same question.

  Hello

  Please add details welcome to the local host file machine under C:\Windows\System32\drivers\etc\.

  Hope it should work... Let me know the output

• Revoked certificate of UCS Express E140D MMIC KVM

  So I have a bunch of 2951 s with E140D blades in them. I need to install ESXi on them but the stinking KVM (accessed via the MMIC) for each of them comes with a revoked certificate error.

  I just did this for a bunch of M3s C240 with no problems.

  CIMC firmware version is:

  2.1 (1.20130726203500)

  This appears to be later - I just downloaded the latest version and the number corresponds to the existing version.

  I did not open a TAC case again; I have problems with phone and my serial number don't like the online form. However, I'm going to miss a deadline for this reason.

  Here's the traceback of java:

  java.security.cert.CertificateRevokedException: certificate has been revoked, reason: AFFILIATION_CHANGED, date of revocation: Thu May 05 14:15:10 EDT 2011, authority: CN = VeriSign Class 3 Code signing 2010 CA, OU = terms of use at https://www.verisign.com/rpa (c) 10, OR = VeriSign Trust Network, O = "VeriSign, Inc.", C = US, extensions: {}

  at com.sun.deploy.security.RevocationChecker.checkOCSP (unknown Source)

  at com.sun.deploy.security.RevocationChecker.check (unknown Source)

  at com.sun.deploy.security.TrustDecider.checkRevocationStatus (unknown Source)

  at com.sun.deploy.security.TrustDecider.getValidationState (unknown Source)

  at com.sun.deploy.security.TrustDecider.validateChain (unknown Source)

  at com.sun.deploy.security.TrustDecider.isAllPermissionGranted (unknown Source)

  at com.sun.javaws.security.AppPolicy.grantUnrestrictedAccess (unknown Source)

  at com.sun.javaws.security.JNLPSignedResourcesHelper.checkSignedResourcesHelper (unknown Source)

  at com.sun.javaws.security.JNLPSignedResourcesHelper.checkSignedResources (unknown Source)

  at com.sun.javaws.Launcher.prepareResources (unknown Source)

  at com.sun.javaws.Launcher.prepareAllResources (unknown Source)

  at com.sun.javaws.Launcher.prepareToLaunch (unknown Source)

  at com.sun.javaws.Launcher.prepareToLaunch (unknown Source)

  at com.sun.javaws.Launcher.launch (unknown Source)

  at com.sun.javaws.Main.launchApp (unknown Source)

  at com.sun.javaws.Main.continueInSecureThread (unknown Source)

  to com.sun.javaws.Main.access$ 000 (unknown Source)

  to com.sun.javaws.Main$ 1.run (unknown Source)

  at java.lang.Thread.run (unknown Source)

  I don't see anything that looked relevant in newspapers.

  Hi Michael,

  It seems that you hit a bug for the E series: CSCtx85249.

  You will follow it please workaround for

  CSCtx85249    Could not launch KVM Java exception that certification was

  revoked

  Console KVM symptom does not start and displays the following Java

  exception error:

  Certificate has been revoked

  sun.security.validator.ValidatorException: PKIX path validation failed:

  java.security.cert.CertPathValidatorException: certificate has been revoked

  Solution to workaround on the client system, disable the configuration of Java

  the Java Control Panel settings follow these steps:

  Step 1 go to advanced > Security > General

  Step 2 using CRL revocation checking certificates

  Enable line stage 3 validation of certificate

  If you use Mac, in addition to modifying the Java preferences, you must

  to change the CRL and OCSP checking off

  underKeychain > preferences > certificates under OSX.

  In some scenarios, you must do the following if you are a Mac user:

  Step 1 go to keychain > certificates. Double-click on the cisco.com partner

  certificate.

  Step 2: click the right arrow for Trust and select always trust in the when

  using this certificate dialog box.

  Step 3 restart the browser and connect to the MMIC web

  interface.

  Please, let me know if that solves the problem.

  Thank you

  -Bruce

• iCal crash on first launch

  Any who,

  My copy of iCal has been crashing on 1st launch of years. I decided to try to solve it because it is time. I ran a software called being check scan my system and responded to a post, but no one answered. Hoping someone can help me. Here are the results. Thanks in advance if you can.

  EtreCheck version: 2.8 (240)

  Report generated 2016-02-02 14:56:03

  Download EtreCheck from http://etrecheck.com

  Time 02:07

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click on the link [check files] help with unknown files.

  Problem: Apps are broken

  Description:

  iCal always freezes on the first launch all the time. Have you tried many fixes but no luck.

  Hardware Information: ⓘ

  iMac (21.5 inch, at the end of 2012)

  [Data sheet] - [User Guide] - [Warranty & Service]

  iMac - model: iMac13, 1

  1 2.9 GHz Intel Core i5 CPU: 4 strands

  16 GB expandable RAM - [Instructions]

  BANK 0/DIMM0

  OK 8 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 8 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Video information: ⓘ

  NVIDIA GeForce GT 650M - VRAM: 512 MB

  iMac, 1920 x 1080

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - time since started: about one day

  Disc information: ⓘ

  HTS541010A9E662 disk HARD APPLE disk1: (1 TB) (rotation)

  EFI (disk1s1) : 210 MB

  HD (disk1s3) [recovery] recovery: 650 MB

  Macintosh HD (2) /: 1.11 TB (808,06 GB free)

  Storage of carrots: disk0s2 120.99 GB Online

  Storage of carrots: disk1s2 999.35 Go online

  SM128E SSD APPLE disk0: (121,33 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) : 210 MB

  Boot OS X (disk0s3) : 134 MB

  Macintosh HD (2) /: 1.11 TB (808,06 GB free)

  Storage of carrots: disk0s2 120.99 GB Online

  Storage of carrots: disk1s2 999.35 Go online

  USB information: ⓘ

  Hub keyboard Apple, Inc.

  Logitech Logitech Wireless Headset

  Apple Inc. Apple Keyboard

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Tablet PTZ-630

  Western Digital My Book 1110 999,5 GB

  EFI (disk3s1) : 210 MB

  MyBook (disk3s2) / Volumes/MyBook: 999,16 GB (6.94 GB free)

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Configuration files: ⓘ

  /etc/launchd.conf - file exists but not expected

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  /Library/LaunchAgents/com.motive.alertDetectorHost.plist

  ~/Library/LaunchAgents/com.fontyou.appRestarter.plist

  /Library/LaunchAgents/com.motive.UserAgent.plist

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac.helperTool.plist

  /Library/LaunchDaemons/com.motive.systemDaemon.plist

  5 unknown files found. [Check files]

  Kernel extensions: ⓘ

  / Applications/Toast 10 Titanium/Toast Titanium.app

  [no charge] com.roxio.BluRaySupport (1.1.6) [Support]

  com.roxio.TDIXController [no charge] (1.7) [Support]

  / Library/Extensions

  [no charge] com.Wacom.kext.FTDI (1-10,9 SDK) [Support]

  / System/Library/Extensions

  com.Aliph.driver.jstub [no charge] (1.1.2 - 10.7 SDK) [Support]

  com.Wacom.kext.wacomtablet [no charge] (6.3.10 - 10.9 SDK) [Support]

  [no charge] com.wdc.driver.1394HP (1.0.7) [Support]

  [no charge] com.wdc.driver.USBHP (1.0.5) [Support]

  Launch system officers: ⓘ

  [loading] 150 tasks Apple

  [operation] 86 tasks Apple

  Launch system demons: ⓘ

  [loading] 197 tasks Apple

  [operation] 90 tasks Apple

  Launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  [failure]... com.adobe.ARMDCHelper.cc24aef4a1b90ed56a [Support] plist

  [operation] com.adobe.AdobeCreativeCloud.plist [Support]

  [loading] com.adobe.CS4ServiceManager.plist [Support]

  [operation] com.epson.eventmanager.agent.plist [Support]

  [operation] com.extensis.FMCore.plist [Support]

  [failure] com.google.keystone.agent.plist [Support]

  [operation] com.motive.alertDetectorHost.plist [Support]

  [operation] com.motive.userAgent.plist [Support]

  [loading] com.oracle.java.Java - Updater.plist [Support]

  com.TeamViewer.TeamViewer.plist [failure] [support] [details]

  [failure] com.teamviewer.teamviewer_desktop.plist [Support]

  [operation] com.wacom.wacomtablet.plist [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist [Support]

  [operation] com.adobe.adobeupdatedaemon.plist [Support]

  [loading] com.adobe.agsservice.plist [Support]

  [loading] com.adobe.fpsaud.plist [Support]

  [loading] com.barebones.textwrangler.plist [Support]

  [loading] com.google.keystone.daemon.plist [Support]

  [operation] com.motive.systemDaemon.plist [Support]

  [loading] com.oracle.java.Helper - Tool.plist [Support]

  [failure] com.teamviewer.teamviewer_service.plist [Support]

  [loading] 2 tasks Apple

  User launch officers: ⓘ

  [failure] com.adobe.ARM. [...]. plist [Support]

  [loading] com.akamai.client.plist [Support]

  [loading] com.facebook.videochat. [entrenched passage] .plist [Support]

  [failure] com.fontyou.appRestarter.plist [Support]

  [failure] com.google.Chrome.framework.plist [Support]

  [loading] com.macpaw.CleanMyMac.helperTool.plist [Support]

  [operation] com.spotify.webhelper.plist [Support]

  Items in user login: ⓘ

  None

  Other applications: ⓘ

  [operation] com.adobe.acc.AdobeDesktopService.114592.496479D1 - 734-A - 4892 - 9 d 65-AAB651733FE4

  [ongoing] com.Adobe.accmac.81312

  [operation] com.apple.xpc.launchd.oneshot.0x10000007.Living Earth Desktop

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000d.EtreCheck

  [ongoing] com.evernote.EvernoteHelper

  [ongoing] com.extensis.FontDoctorHandler

  [ongoing] com.extensis.FontDoctorScheduler

  com.radiantlabs.LivingEarthHDDesktop [loading]

  [ongoing] com.Skype.Skype.70112

  [ongoing] com.wacom.TabletDriver.114272

  [ongoing] com.wacom.WacomTouchDriver.113952

  [ongoing] JP.co.Canon.cijscannerregister.119072

  [ongoing] JP.naver.line.Mac.7072

  Plug-ins Internet: ⓘ

  AdobePDFViewerNPAPI: Version: 15.007.20033 - SDK 10.8 [Support]

  Flash Player: Version: 20.0.0.286 - SDK 10.6 [Support]

  AdobePDFViewer: Version: 15.007.20033 - SDK 10.8 [Support]

  googletalkbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [Support]

  AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Support]

  iPhotoPhotocast: Version: 7.0 - 10.8 SDK

  GoogleOneClickPluginDeluxe: Version: unknown

  RealPlayer Plugin: Version: unknown

  QuakeLivePlugin: Version: 0.1.0.277 [Support]

  npMotive: Version: 1.0.0 - SDK 10.7 [Support]

  QuickTime Plugin: Version: 7.7.3

  FlashPlayer - 10.6: Version: 20.0.0.286 - SDK 10.6 [Support]

  AdobeAAMDetect: Version: 3.0.0.0 - SDK 10.9 [Support]

  GarminGpsControl: Version: 4.1.0.0 Release - SDK 10.7 [Support]

  DivXBrowserPlugin: Version: 2.0 [Support]

  Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Support]

  Web of Google Earth plugin: Version: 6.0 [Support]

  Default browser: Version: 601 - SDK 10.11

  WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 [Support]

  o1dbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [Support]

  JavaAppletPlugin: Version: Java 8 update 65 build 17 check version

  User Plug-ins internet: ⓘ

  npUplayer.1.0.2.7: Version: mydlink services plugin_x86_64 1.0.2.7 - 10.9 SDK [Support]

  Audio Plug-ins: ⓘ

  DVCPROHDAudio: Version: 1.3.2

  3rd party preference panes: ⓘ

  Akamai NetSession preferences [Support]

  Flash Player [Support]

  Growl [Support]

  Java [Support]

  WacomTablet [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 1.11 TB disc: 303,76 GB

  Destinations:

  MyBook [Local]

  Total size: 999,16 GB

  Total number of backups: 105

  An older backup: 2014-04-16, 09:50

  Last backup: 2016-02-02, 14:46

  Size of backup drive: adequate

  Backup size GB 999,16 > (disc 303,76 GB X 3)

  Top of page process CPU: ⓘ

  13% kernel_task

  4% nsurlsessiond (2)

  3% cloudd

  2% WindowServer

  2% fontd

  Top of page process of memory: ⓘ

  1.70 GB com.apple.WebKit.WebContent (10)

  1.34 GB kernel_task

  836 MB mdworker (19)

  Photos of 557 MB

  Node (4) 475 MB

  Virtual memory information: ⓘ

  1.02 GB free RAM

  15 h 00 used GB RAM (3,79 GB being cached)

  136 MB used Swap

  Diagnostic information: ⓘ

  February 1, 2016, 19:39:33 ~/Library/Logs/DiagnosticReports/fontworker_2016-02-01-193933_[redacted].crash

  /System/Library/frameworks/ApplicationServices.Framework/versions/A/frameworks/ ATS.framework/Versions/A/Support/fontworker

  1 February 2016, 19:39:21 self test - passed

  February 1, 2016, 19:29:39 pm /Library/Logs/DiagnosticReports/AdobeCRDaemon_2016-02-01-192939_[redacted].cras

  / Library/Application Support/Adobe / * / Adobe Service.app/Contents/Frameworks/AdobeCrashReporter.framework/Versions/A/AdobeCR Office Daemon.app/Contents/MacOS/AdobeCRDaemon

  February 1, 2016, 19:29:38 pm /Library/Logs/DiagnosticReports/AdobeCRDaemon_2016-02-01-192938_[redacted].cras

  / Applications/utilities/Adobe Creative Cloud / * / emon.app/Contents/MacOS/AdobeCRDaemon creative Cloud.app/Contents/Frameworks/AdobeCrashReporter.framework/Versions/A/AdobeCRDa

  January 1, 2016, 07:24:30 PM/Library/Logs/DiagnosticReports/WacomTabletDriver_2016-02-01-192430_ [redacted]. Crash

  com.wacom.WacomTabletDriver - Library/Application Support/Tablet/WacomTabletDriver.app/Contents/MacOS/WacomTabletDriver

  February 1, 2016, 19:23:54 pm /Library/Logs/DiagnosticReports/AdobeCRDaemon_2016-02-01-192354_[redacted].cras

  January 1, 2016, 07:21:25 PM/Library/Logs/DiagnosticReports/WacomTabletDriver_2016-02-01-192125_ [redacted]. Crash

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• a sentence installed updated software, "OSx recovery software update" and the overview application still refuses to work however I try to launch it. He started and left immediately after recovery immediately, she leaves, she shows also a no document error

  I just installed new updates of software, "OSx recovery software update" and the Preview app still refuses to work, however I try to launch it. He launched and immediately closed unexpectedly after unexpectedly WARNING recovery he immediately left again, it also shows a notice of error document

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• The Virtual Console connection failure

  PE R410 with iDRAC6 Enterprise.

  I use Firefox on Windows Vista. When I click on "Launch Virtual Console", a pop-up window wonder what should make Firefox of the JNLP file. If I choose to open it with Java Web Start, an error message "Splash: recv failed" is displayed. So I choose Save the JNLP file and then create a Windows shortcut with

  "C:\Program Files\Java\jre6\bin\javaws.exe" "-Xnosplash" "D:\Temp\Rconsole\saved.jnlp".

  When I click on this shortcut, a window with the message "Connecting to Virtual Console Server" appears, then another window slow "failed to connect, perhaps because of the network connection. Please try again ".

  The above method works with redirection to console of Sun ILOM (also to be downloaded/opened by Java Web Start JNLP file). The difference is that the version of the Sun can ask for name of user and password not everything in a Dell. IDRAC6 Video Viewer of Dell has the askpass function?

  I tried with Windows IE9. However, the open video viewer of IE9 does not have a keyboard input. Click on "Tools - Options Session' fails to open the options window (nothing happens after the click) - result of IE9 uses Active X not Java?"

  I also tried with Firefox under RHEL6 / x 86, that one works perfectly.

  Configure the video active encryption = No to iDrac. Solved my problem