[SOLVED + Sample Code] Need help with selector/addChild

Hello all, I tried to avoid asking questions without looking up everything I could, but even it's a little difficult right now with like new as is everything.

In any case, I'll have trouble here add a selector in my opinion. I am new to the development of BB and DEVELOPING as well, so I learn that I will, but I'm getting very frustrated by the lack of useful errors I get. Looks like a problem and the service, I'm just stops treatment and said nothing.

So I try to use some of the example for the DatePicker code that has been published in the examples. I couldn't get this to work, so I took out just a small part of trying to create a selector to leave, but once I try to do an addChild (pick); just, the function stops the treatment and acts like it's done.

Here is the code I have right now:

protected function view1_viewActivateHandler(event:FlexEvent):void
            {
                taDesc.text = "blah";

                var arrMonth:Array=[];
                var pick:Picker = new Picker();

                arrMonth.push({label: "January"});
                arrMonth.push({label: "February"});
                arrMonth.push({label: "March"});
                arrMonth.push({label: "April"});
                arrMonth.push({label: "May"});
                arrMonth.push({label: "June"});
                arrMonth.push({label: "July"});
                arrMonth.push({label: "August"});
                arrMonth.push({label: "September"});
                arrMonth.push({label: "October"});
                arrMonth.push({label: "November"});
                arrMonth.push({label: "December"});

                pick.dataProvider = new DataProvider([new DataProvider(arrMonth)]);
                pick.selectedIndices = [0];
                pick.x = 50;
                pick.y = 50;
                addChild(pick);

                taAmount.text = "test";
            }

As you can see, I'm creating the selector in the viewActivateHandler function. I'll put the text into two textarea elements different just to debug. In the State, the taDesc.text = "blah"; works very well, but he never even gets to taAmount.text = "test";

Since it just silently fails without telling me anything useful (and I have yet to get any kind of work of debugging on the Simulator), I can't really say why it's a failure, but it's definitely on the addChild (pick); I cannot comment on what a single line of output and it makes all along.

Someone at - it none seen why it hangs on the addChild?

I appreciate the help!

Ahhh! I'm trying to make a good impression of not posting things already answered and I'm not looking, but another search after the validation has found the solution for me.

JRab said the problem in this thread: http://supportforums.blackberry.com/t5/Tablet-OS-SDK-for-Adobe-AIR/Picker-List-Component-Not-Working...

Tags: BlackBerry Developers

Similar Questions

  • Need help with slui message with the Validation Code: 50

    OT: need help with the message 'victim' slui...

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->

    Validation code: 50
    Code of Validation caching online: 0xc004c4a2
    Windows product key: *-* - YMK9F - 7Q3XK-X7D3P
    Windows product key hash: 9WDJkbD1PdUJ + GCdK63bG2yus5g =
    Windows product ID: 00371-702-8613485-06367
    Windows product ID type: 5
    Windows license type: retail
    The Windows OS version: 6.1.7601.2.00010100.1.0.048
    ID: {60986DD4-5ADA-464C-A590-469385BD5D3A} (1)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Professional
    Architecture: 0 x 00000009
    Build lab: 7601.win7sp1_gdr.150928 - 1507
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 109 n/a
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {60986DD4-5ADA-464C-A590-469385BD5D3A}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-X7D3P5S-1-5-21-4040712825-3780279311-4191590923the system manufacturer,System Product NameAmerican Megatrends Inc. 00371-702-8613485-06367 0802 20110601000000.000000 + 000F3A53C07018400FE04090409Central Standard Time(GMT-06:00)03109

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7601.17514

    Name: Windows 7 Professional edition
    Description: operating system Windows - Windows (r) 7, retail channel
    Activation ID: c1e88de3-96c4-4563-ad7d-775f65b1e670
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00371-00212-702-861348-00-1033-7601.0000-1142014
    Installation ID: 022214046070387640229264400212325972472065330163335456
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: X7D3P
    License status: Notification
    Reason for the notification: 0xC004F200 (non-genuine).
    Remaining Windows rearm count: 4
    Trust time: 12/01/2016 11:28:57

    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: 0xC004C4A2
    Beyond: 0 x 0000000000000000
    Event timestamp: 1:11:2016 12:55
    ActiveX: Registered, Version: 7.1.7600.16395
    The admin service: recorded, Version: 7.1.7600.16395
    Output beyond bitmask:

    --> HWID data
    Current HWID of Hash: QAAAAAEAAwABAAEAAQADAAAABwABAAEAln3OI0bUDFRsO24dgCKo58SW2JyUY/1mMckmPrb67HxoDsAKMMl2Vg ==

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes, but no SLIC table
    Windows marker version: N/A
    OEMID and OEMTableID consistent: n/a
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    APIC1425 APIC 060111
    FACP 060111 FACP1425
    HPET 060111 OEMHPET
    MCFG 060111 OEMMCFG
    LASRYVITRAGE OEMB1425 060111
    ASPT 060111 PerfTune
    OEMOSFR OSFR 060111
    SSDT DpgPmm CpuPm

    Hello

    Thanks to everyone who responded to my question.

    Turns out it would not activate the system properties page.

    He did, however, turn on the tool online browser without a

    hitch. Yes, problem solved.

    Jon

  • Need help with the launching track pack for forza code 4

    Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.

    This is the help I get when the cat to an Ambassador xbox on xbox.com

    Terry wrote:
    Need help with the launching track pack for forza code 4
    The Xbox Ambassador says:
    Location of Ambassador of the community...
    The Xbox Ambassador says:
    Location of Ambassador of the community...
    The Xbox Ambassador says:
    Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
    The Xbox Ambassador says:
    Hello
    Terry wrote:
    Hello
    The Xbox Ambassador says:
    Hey
    Terry wrote:
    just to be on the phone to xbox live support and was told to come here
    The Xbox Ambassador says:
    ok\
    The Xbox Ambassador says:
    What is your problem?
    Terry wrote:
    I bought the 4 for forza ansd 360 new sealed Christmas...
    Terry wrote:
    has got 2 codes that accompanies the game but the pack track code does not work
    The Xbox Ambassador says:
    Wow good
    Terry wrote:
    whenever I put in the code it says code redeemed
    The Xbox Ambassador says:
    I think the code is used. You must return to the retailer
    Terry wrote:
    I tried to, but since I already opened the case they will not accept
    The Xbox Ambassador says:
    Oh. No,
    Terry wrote:
    the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
    The Xbox Ambassador says:
    Maybe it was auto bought?
    Terry wrote:
    so, how do I get another code generated track Pack if defective?
    The Xbox Ambassador says:
    I do not know.
    Terry wrote:
    bought the game new, so I get the track pack
    The Xbox Ambassador says:
    Oh. It's bad.
    The Xbox Ambassador says:
    I think that if you Exchange 1 code it will buy it
    Terry wrote:
    car pack code worked, starter pack did not work
    The Xbox Ambassador says:
    Oh.
    The Xbox Ambassador says:
    It's a bad
    The Xbox Ambassador says:
    BTW you have an evolution of the tests?
    Terry wrote:
    Yes, I want to? but more anxious to get a code object generated for this pack
    The Xbox Ambassador says:
    Hey if I help can u give me this game too?
    Terry wrote:
    ?????????????????
    Terry wrote:
    So is it possible to get a code for that time?
    The Xbox Ambassador says:
    Hey
    The Xbox Ambassador says:
    Yes.
    The Xbox Ambassador says:
    you need to contact them
    The Xbox Ambassador says:
    and tell them that the code is used.
    Terry wrote:
    I was told to come here? where can I go to get the code?

    Hi Terryg76,

    ·         What version of the operating system is installed on the computer?

    I suggest you to contact the game manufacturer for more help and information.

  • need help with windows update C8000F1A error code

    I need help with an error code that is given to my PC when I try to put up-to-date

    Hello

    1. don't you make recent changes?

    2. This does happen with any special updates or all updates?

    I suggest you to follow these steps and check if that helps:

    Method 1:

    If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Method 2:
    I suggest you follow the steps in the link below and check if it helps:
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    It will be useful.

  • Need help with Flash - really basic!

    Hi, I really need help with Flash and quick. I have to create an auto-run cd, but before I can create that, I have to make everything works! I took a class in College Flash, which up to 1 1/2 ago so im kind of knowledge missing!

    My first problem is as follows:
    I have the homepage, and it contains a button English and french.
    When you click on buttons, it brings you to the next page, either resourcesFr or resourcesEn.
    I tried to use the loadMovie script but and it works but the new page loads on the home page you can still see the English/french under buttons. How can I fix? I know its simple but I am short on time... Should I still use the loadMovie script?

    My other problem is that im trying to have another button to link to a folder. Use the script for getURL for this as well?

    Help!

    I was able to solve my problem... it was only the forward slash that were in the wrong way... so the correct code is:

    on (release) {}
    DRV = _url.substr (8.1);
    getURL (drv + ": / English/brochures");
    }

    Only took me 5 days... I think I need to buy a script book action! Laughing out loud

  • I'm suddenly needing help with my browser Firefox (6.0.2)

    Hello
    I'm suddenly needing help with my browser Firefox (6.0.2)

    (OS: I use Windows XP).

    When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.

    I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.

    This problem started today, September 8, 2011 and has never happened before.

    Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?

    I also noticed that just before I "opened" Firefox, I now get a small box indicating:

    [JAVASCRIPT APPLICATION]
    Handl exc in Ev: TypeError: this oRoot.enable is not a function

    This never appeared before - I hope that it offers a clue has what is wrong.

    The browser not be stuck in Mode safe, said by the way.

    Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
    (A friend sends this request in my name from their pc)

    Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.

    If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
    In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.

    Thanks in advance.

    One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • I need help with an installation failure to interpret and troubleshoot a Setup log.

    Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

    Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

    According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

    Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

    https://discussions.Apple.com/message/26309669#26309669

    I used this method with success to install FCS2 in Yosemite:

    [click on images to enlarge]

    However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

    First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

    Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

    If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

    It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

    Here is the post on MacRumors with pre-installed Setup log:

    http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

  • Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

    Original title: need help with the blue screen issue
    My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

    Hello

    1. Since when are you facing this problem?
    2. you remember to make changes to the system?
    3. do you get an error with this error code?

    I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

    Method 1.
    I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
    a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
    Description of the Windows XP Recovery Console for advanced users
    http://support.Microsoft.com/kb/314058
    b. perform a disk check.
    How to perform disk error checking in Windows XP
    http://support.Microsoft.com/kb/315265

    Method 2.
    I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
    How do I recover from a corrupted registry that prevents Windows XP startup
    http://support.Microsoft.com/kb/307545

    I hope this helps.

  • Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI".

    Hello

    Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI". Y at - it solution or another method?

    Hi ErikLee,

    Do you have MS Outlook installed on your computer?

    Windows mail import and export opportunities are limited to an Outlook .pst file or an Exchange Server mailbox. They are available only if MS Outlook is installed.
    If MS Outlook is not installed and you start an import or export action, the necessary support files are not present for Windows mail complete the operation. Then I suggest you to install Outlook temporarily and see if the problem is resolved.

    Follow the instructions below and check if the problem is resolved.

    1. reboot your computer, and then start Windows Mail.
    2. on the Tools menu, click Options.
    3. in the connection tab, click on edit to open the Internet Properties dialog box.
    4. in the tab programs, click on an application other than Windows mail e-mail in the e-mail list. Click on apply and then click OK.
    5. click OK again to close the Options dialog box.
    6. exit Windows mail and restart Windows mail.

    If this does not work, I suggest you upgrade to Windows Live Mail to import or export messages that may help you resolve the issue.

    To download Windows Live Mail, visit the following Microsoft Web site:
    http://get.live.com/wlmail/overview

    For more information about Windows Live Mail, see the Microsoft Web site at the following address:
    http://windowshelp.Microsoft.com/Windows/en-us/help/4b30d3d6-abe2-46d1-a5fd-4a1ba786a1381033.mspx

    Check whether the problem is resolved.

    Please post back and let us know if it helped to solve your problem.

    Kind regards
    KarthiK TP

  • I need help with my Windows Media Center. I was not able to get any video on my Windows Media Center.

    original title: I need help with my Windows Media Center.

    I was not able to get any video on my Windows Media Center. How do I do that? I can put it on Facebook, but cannot get them on the Media Center. I'm ready to pull my hair out LOL

    Hello

    1. what exactly happens when you try to play any video on media center to Windows? Error message? If so, then post back the exact error message.
    2. were you able to play videos on Windows media center with no problems before?
    3. don't you make changes on the computer before this problem?
    4. are you able to play the videos on Windows media player?
    5 are supported by Windows media centerfiles?

    Answer to the above mentioned questions could help us help you better.

    The following article might be useful.
    Solve problems with DVDs and movies in Windows Media Center
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-DVDs-and-movies-in-Windows-Media-Center

  • Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

    Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

    I don't know why vista windows no longer charge, or when the files and folders disappeared

    How Windows Defender is on this problem?

    Follow these steps to try to solve your problems of boot.

     

     

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Data recovery:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    See you soon.

    Mick Murphy - Microsoft partner

  • Need help with the error of connection Internet "Reset local connection adapter".

    Original title: Need help with Internet connection.

    Hi, sometimes when I go to my office (HP 2009 m) I get a message that I am not connected to the internet (although I have no problem with the connection on my IPad).  When I click on solve internet connection Windows Network Diagnostics freezes when it gets to solve problems "the local connection adapter reset."   I have to turn off my computer by unplugging and then it works normally when she returns to the top. (Sorry if my explanation is difficult to decipher, I'm not very tech savvy) This could be the cause and how to fix it?  Thanks in advance.

    Well, I expected more of a response, but I'll wing it from here: your cable goes into a modem.  This modem can be a wireless modem/router, or simply a modem cable to your computer.

    Connection problem you might start by connecting the cable into the modem.  Ensure that it is well defined.  If everything looks good, then it is possible that there is a decline in cable service before he gets to the modem.  For example, the interface side of the House can be affected by a bad connection, for example water intrusion, or poor soil.  So you may want to check into that.  Then, there is always the possibility that your cable provider has lost his momentaily of transmission, and that the modem needs to be reset.  If this happens often, you must contact the cable provider.

    Modem, your computer can be connected by cable, so you will need to check how firmly the connection is.  Then, there is always the possibility that the modem is wrong.

    But if your connection is through a wireless modem/router, your connection may have lost because of a bad signal.  Once more..., the modem/router could go wrong.

    Edit has added:

    Looking back on what you said about the Ipad, I feel that you have a wireless modem/router.  It is possible that your connection to the desktop must be after you have used the Ipad.  For example, you may need to right-click on the monitor icon in the Systray to your desktop and open your network sharing Center.  Even if you can say that you are connected to the Internet, you may not.  Then... just ... simplement cliquer click on 'connect or disconnect', then find your network connection appropriate, right click on that and select disconnect, then immediately right-click the same but select Connect.


    Will be a new connection to the Internet.

  • Need help with mobile layout

    Hello. Need help with my layout sensitive, using straight lines only html5 and css3 that I can understand and explain a novice level please - without any restart. Desktop and mobile are in a single html doc. The desktop version is 'ok '.

    current version (6_2)

    Try to match these mobile Office layouts

    On the mobile version:

    -Impossible to get the buttons nav blocks, vertical text button Align, and align the image of the product (square pictures) to the Center. (margin: auto; does not work)

    I used heights in the header because I'll have code for desktop, mobile and tablet in the CSS so it changes (and do not know how to support better). Also need to Add a link to the logo image background in header.

    Thanks in advance!

    TheOriginal150mph wrote:

    Hello. Need help with my layout sensitive, using straight lines only html5 and css3 that I can understand and explain a novice level please - without any restart. Desktop and mobile are in a single html doc. The desktop version is 'ok '.

    current version (6_2)

    Try to match thesemobile Officelayouts     

    On the mobile version:

    -Impossible to get the buttons nav blocks, vertical text button Align, and align the image of the product (square pictures) to the Center. (margin: auto; does not work)

    Commenting on just a habit of property changing the css if you have defined it for the desktop version. Your nav elements are not vertically Center because you have a bottom padding set on them for the office, there are only changes for mobile in your css media query.

    .main-nav a {}

    display: block;

    text-decoration: none;

    / * padding-bottom: 15px;   */

    Padding: 12px 0;

    }

    Change the properties for the .product-images for mobile boxes: you have float attached to them for the desktop version and which cascade down to the mobile version, unless you change in the media query:

    .product-image {}

    float: none;

    Width: 50%;

    margin: 0 auto 20px auto;

    }

    As I mentioned in one of my posts related to your project, you will probably have to make your product images a bit larger. They fill the area once they form a column to width of 768px screen or you could resist transform them to one column until a little more by using a media query extra set at a narrow screen width to evoke this action

  • need help with download of cc. gives error 1001 whenever I install.

    need help with download of cc. gives error 1001 whenever I install.

    Hello

    Please see the thread: https://forums.adobe.com/thread/2106211 and CC update crash! Error code: 1001

    Also, please see the article: https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

    Please write if it helps.

    Kind regards

    Shelly

  • Need help with query Cumulative difference

    Hi all

    I need help with a query and my requirement is as below

    {code}

    ROWNOORDERSVALUE

    110900
    211700
    312500
    413400

    {/ code}

    I have need to query which will display the cumulative difference for example I value tell 10000 numbers opening

    now I need for each of the lines of cumulative difference

    {code}

    ROWNO ORDERS DIFF

    1 10 10000 - 900 = 9100

    2 11 9100 - 700 = 8400

    3 12 8400 - 500 = 7900

    4 13 7900 - 400 = 7500

    {/ code}

    WITH commands LIKE (10 SELECT order_id, 900 double UNION ALL val
    11. SELECT, 700 FROM dual UNION ALL
    SELECT 12, 500 FROM dual UNION ALL
    Select 13, 400 double)

    SELECT row_number() over (ORDER BY order_id ASC) AS rowno
    order_id
    sum (val) 10000 - OVER (ORDER BY order_id ASC) AS diff
    orders

    /

    HTH

Maybe you are looking for

  • Optimize my iPhone photo storage

    My iPhone says that I have 20 GB of photos stored. I do not know if those that are stored on my iPhone or iCloud. How can I know who is who or both? I want to free GB of space on my iPhone. Thanks for the tips!

  • my computer told me several times this update for windows xp that kb248119 could not be updated

    My computer tells me that this update of security for windows xp that kb248119 has failed. What should I do?

  • Why a strange menu appears when I pop a screen

    After I pop a screen (the one that allows users to add a contact pre-populated from my code) a small menu will appear which has the following menuitems: save the contact (my addition), hide the keyboard, Application Switch, full Menu.  Contact 'save'

  • Windows 7 keeps closing my computer after 1 min of inactivity

    Symptoms: The lock screen appears after 1 minute of inactivity. Details: The computer is a laptop ASUS U46E under Windows 7 Home Premium. Screensaver increased wait to 999 minutes and unchecked "on Resume, protect by password". Past delays on power s

  • 9.1 Produst ELM in

    I'm under stand-alone ELM server. The IP address if the CUCM has changed and now I get the Instance of product to the hostname/IP address is already configured on this Enterprise License Manager. When I try to add the new server. There is no evidence