Some applications keep constantly suspended - except in safe mode

Similar Questions

• Vista does not, except in safe mode?

  Have a frined, dell sent him a new hd. It crashes except in safe mode. He has tried to restore factory reimage.

  Is it sounds like a virus or a hardware problem? Any suggestions would be helpful. Thanks, Bruce

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• El capitan update fails to restart except in safe mode. can I recover the operating system in safe mode?

  ElCapitan updated (from apple update) fails to complete restart, except in safe mode. How can I recover or reinstall the OS of a restart to safe mode?

  Boot into Recovery (R command) and run disk utility > first aid on your MacintoshHD

  You can always reinstall the os x from here, if necessary

  OS X: on OS X Recovery - Apple Support

• Phone constantly optimize the applications and does not start in safe mode.

  Hello, I restarted my phone yesterday morning and it has been "Optimizing apps" since then, I have no access to a pc that I work away from home, I reset hard it loads of times and tried to start in safe mode by using low volume and power (it does not restart the phone the sony screen over and over) is here something I can do to get the z3 works again? Any help is appreciated!

  @Mav0095

  You will need a computer to use the CCP or bridge

  PC Companion (CCP)

  Bridge (for Mac)

  Xperia Companion (XC)

  Software repair Guide

  Alternatives on how to backup Xperias

  http://talk.sonymobile.com/thread/36355

• Firefox opens not except in safe mode

  When I clicked to open Firefox a few days ago, a small window opens with this message:

  A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script ends.
  
  Script: file:///C:/Program%20Files/Mozilla%20Firefox/components/nsExtensionManager.js:623
  
  
  I found the solution page about this to Firefox and followed the instructions - closed FF, open in Mode safe, is go to Add - ons and changed my theme to the default.

  Then I closed FF and it has reopened.

  The solution worked. (yay)

  Later, however, I had the same problem when I tried to open Firefox again.

  I went through the steps of opening Safe Mode but my theme was already by default, so I changed to another and then changed back to the value default, FF closed and then reopened.

  When I had the same problem, once again, I went through the above step and then uninstalled all the themes, but the default value. (Or so I thought).

  The next time I tried to open FF, the same ole error message came. I did the fix mode safe, FF has closed and then reopened.

  However, another message came:

   FLAGFOX VERSION: null (missing IPDB!)
  
  

  ERROR MESSAGE: Error starting Flagfox Fatal!

  LIFTING EXCEPTION: TypeError: ExtensionManager.getItemForID (id) is null

  STACK TRACE: start (@file:///C:/Users/Donna/AppData/Roaming/Mozilla/Firefox/Profiles/ilt58l3p.default/extensions/%7B1018e4d6-728f-4b20-ad56-37578a4de76b%7D/chrome/flagfox/modules/flagfox.jsm:40)
  ([object ChromeWindow])@file:///C:/Users/Donna/AppData/Roaming/Mozilla/Firefox/Profiles/ilt58l3p.default/extensions/%7B1018e4d6-728f-4b20-ad56-37578a4de76b%7D/chrome/flagfox/modules/flagfox.jsm:159
  Flagfox_loadForThisWindow ([Object Event]) @chrome://flagfox/content/overlay.xul: 16

  BROWSER: Mozilla Firefox (Gecko 1.9.2.8/20100722155716) 3.6.8/20100722155716 settings regional US on WINNT x 86-msvc'
  

  Ugh.

  There was a link to click on but before I could click on it, another window open with this old error:

  A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script ends.
  
  Script: file:///C:/Program%20Files/Mozilla%20Firefox/components/nsExtensionManager.js:623
  
  
  So, I could not click on the link for Flagfox error because I had to close the 2 windows to go to FF Safe-Mode to get rid of the error Add-ons/themes.

  After closing then opening again FF, it opens but crashes. At one point, I had dinner and then came back, and he was still suspended. So, I opened the end of task task manager in FF to close.

  A few weeks ago, I had installed Chrome. Since I saw 'ChromeWindow' in the error of Flagfox, I thought maybe Chrome was to ruin FF so I uninstalled Chrome, turned off and turned back on my computer.

  Then I tried to open FF, only to have these two errors pop up again.

  BTW, after the opening of the FF mode safe (for the moment zillionth), I went to "themes" and they were all there - I thought I had uninstalled all except the default value, but they were all there.

  The furthest (more?) I've come is to be able to click on the link of FlagFox open FF, but then this happens:

  Flagfox.servehttp.com takes too long to respond

  and FF is suspended... and hangs...

  I'm so frustrated!

  So I can open only FF mode without failure.

  I came here on the forum and connected, etc. to post this message, but none of the boxes issue-details were visible, so I am currently using Opera.

  I'd appreciate any help. Please keep in mind that I'm not 12 years old so I don't know much about computers, lol. In other words, please answer with simple and easy words then I'll understand.

  Thank you!

  By chance you have Personas Plus installed, if you do so in safe mode you can access the Add-ons Manager and either disable or uninstall, that should solve your problems.

  The error messages indicate that the add-on FlagFox is the cause of the problems, but Personas Plus version 1.6 is currently havoc with Add-ons. For more details on how to disable or uninstall modules see Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems

• Finder screwy except in safe mode

  Yesterday my finder started acting weird. New windows would not display the folders and files correctly, regardless of the mode, and I could not navigate through the files or boxes in windows. The search function provided the empty windows. The office became inaccessible, followed shortly after by the dock.

  Regained control of some last night even if a restart of the command-opt, but the finder always does not work normally. Today, I did a boot cold (shift key) safe mode, which allows the basic finder functionality, too small. I need a real difficulty. The fact that the finder works in safe mode, logically, gives to think it's a software conflict rather than a hardware problem. I do not know.

  The disruption has surfaced, on the other hand, when I was customizing the toolbar, move the search bar more far to the left, is visible in small windows. Which may or may not be causal. I know just the ability of my finder to find things is obstructed upward.

  Someone has to meet this problem before on Mavericks? I am running 10.9.5. All wisdom welcome here.

  You could try to remove the /Home/Library/Preferences/com.apple.finder.plist file and the Home/Library/Caches/com.apple.finder file. Then relaunch the Finder by pressing the COMMAND-OPTION-ESC keys to open the Manager tasks. Select the Finder, and then click the restart button.

  If your folder/Home/Library / is not visible, then see the following:

  Three ways to make the House/library folder Visible

  A. this method will make the folder visible permanently. Open the Terminal application in the Utilities folder, and paste the following at the command prompt:

  chflags nohidden ~/Library

  Press RETURN.

  B. click on the desktop, press the Option (⌥) key, select library in the Finder menu go.

  C. go to the folder in the Finder menu select go. Paste the following text in the path field:

  ~/Library

  Click the OK button.

• Suddenly, Firefox won't save past except in safe mode, also when I click on the icon to download (next to the home button) nothing happens.

  As the title suggests, for some reason any I can no longer save password unless I'm in safe mode. Same time he began to arrive, the download next to the home button icon became useless. Clicking on it does nothing.

  I tried to reset Firefox, I disabled add ons (it is not them that is the cause), I reinstalled Firefox, I created a new profile, I even transferred data between the profiles. Nothing seems to fix. I don't know what else to do.

  Any help would be greatly appreciated.

  I found the solution! By turning fixed hardware acceleration and turn it on again!

• Firefox not displaying only not the icons on web page correctly except in safe mode

  Hello. We develop a website for the moment and I don't have FF in safe mode some of the icons are not displayed correctly. All other browsers work fine and it will display in FF without any problem. The site is www.livingonmars.com and the icons are the 2 arrows in the upper right of the slideshow. When in safe mode, I see two arrows. Boot in normal mode I see the bottom half of the arrow to the left and half the right arrow above.

  In safe mode, modules and hardware acceleration are disabled. You can try disabling you modules one by one to see if that helps, or you can disable hardware acceleration by doing the following:

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

• Firefox crashes constantly randomly out of safe mode

  Firefox is unusable because it crashes constantly on my WinXP system. Firefox version = 7.0.1. Issue started happening a few versions ago. Accidents happen in safe mode as well and with all extensions and addon is disabled.

  upgrade your browser Firefox 8 and check

  • getfirefox.com

• Consumer ir device does not not on HP laptop and windows that do not open except in safe mode

  I had problems since late April and early May.  I have a high tower of HP Pavilion dv6.  When you try to start, the computer will show the Windows logo then a disappearance back quick page, then to the boot in safe mode prompt. I deleted everything that has been added since April with the exception of ITunes. I did a search of system and found that the infrared device consumer does not work.  I read a few posts, but do not seem to be able to try the suggestions around turning off windows system updates since the trouble began.  Is my only option the total system restore?  How can I get that since nothing came with the computer?

  Hello

  Thank you for the reply back, I suggest that you contact HP support and answer if the problem is solved and please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• Applications does not work - diagnose in safe mode?

  Something has caused several requests to stop running on my system (Vista SP2). I tried several things that didn't work and I was wondering if and how I can use the safe mode to diagnose what is wrong.

  Context: I still have my antivirus McAfee and Windows Update to update. The system has been analyzed the day before the problem occurred. I had not loaded any software before the problems or done anything I can think it was unusual.

  First noticed that IE8 would not charge after normal start, although the Task Manager shows as a work process. Include other programs that also would not go: Google Earth, Windows Mail, Windows Defender & Spotify. (Even once, they appeared as "process" in the Task Manager).

  Firefox showed plugins updated, including Adobe Flash. Tried to date, but all downloads now cause Firefox to crash. Uninstalled Flash and I tried to reinstall manually but the downloaded file application wouldn't start.

  McAfee - who don't answer not normally - would also not re - install when I removed and tried to re-setup.

  I tried other things:

  • msconig to disable startup items
  • used menu "Add/Remove Programs" to ensure that no unwanted programs have been installed.
  • restored the system to a previous point
  • reluctantly, "improved" to IE9
  • downloaded and run Malwarebytes (which took a few pieces of waste)
  • downloaded and running Microsoft Security Essentials, and so I have a protection running.

  None of this had no effect at all on the ability to run programs running normally.
  I would be grateful for suggestions.
  Them

  David F answered now effectively the problem (via the other thread) by suggesting that I created a new user account. It works without a hitch.
  I feel a bit stupid that I had not done before.
  Thanks again.
  Them

• shortcuts don't work not except in safe mode

  original problem - could not access the files on server - received ID username/password invalid even after reset of net admin user. What new user created on the desktop icons and start menu has stopped working (double-click appeared to do nothing).

  After experimentation, found that the opening of any .lnk returns fileNotFound exception. In safe mode without problem.

  A ran two separate a / v verifies - ESET and MalwareBytes.

  Tried to disable as many external services and relevant as appeared startup tasks, without result.

  Problem with new shortcuts and newly created the local administrator user.

  This is updated from windows. No effect.

  Help, please! Thank you.

  Hello chaim handler1,.

  I suggest to try in a clean boot in order to eliminate any possible conflict of third parties:

  Step 1: Perform a clean boot
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
  a. log in the computer using an account with administrator rights.
  b. ClickStartCollapse this includes this image, typemsconfig.exe in the search box, theStart then press ENTER to start the System Configuration Utility.Collapse this includes this imageIf you are prompted for an administrator password or for confirmation, type your password, or clickContinue.
  c. arencontre, clickSelective Startup tab and then click on clear theLoad startup items check box. (Use Boot check box is not available.)
  d. on theServicestab, select hide it all the box, check Microsoft services, and then clickDisable all.

  Note following this step lets Microsoft services continue to operate. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
  e. click OK, and then to clickRestart.
  Step 2: Enable half the services
  a. follow steps 1a and 1B to start the System Configuration utility.
  b. click on the services tab and then click to select theHide all Microsoft services checkbox.
  c. Click to select half of the check boxes in the service list.
  d. click OK, and then to clickRestart.
   
  Step 3: Determine whether the problem returns
  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services, and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.
  Step 4: Enable half of the startup items
  a. perform a clean boot by repeating step 1.
  b. click the theStartup tab and then click to select half of the check boxes in the list of items of theStartup.
  c. click OK, and then to clickRestart.
   
  Step 5: Determine whether the problem returns
  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have initially enabled in the list of items of theStartup.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are disabled in the list of items of theStartup. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be the cause of the problem, repeat step 1 and step 2 without selecting theHide all the box Microsoft services at every step.
  Step 6: Resolve the problem
  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.
  Step 7: Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. ClickStart collapse that includes this image, typemsconfig.exe in the search box and press ENTER. Collapse this includes this image
  If you are prompted for an administrator password or for confirmation, type your password, or clickContinue.
  b. on the arencontre tab, click Start zone option, and then click OK.
  c. When you are prompted to restart the computer, clickRestart.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Laptop does not do anything except in safe mode!

  My laptop has something wrong with it. It allows me to open some things, but when it comes to the final click it wont run anything, I just get the mouse icon timer! All my security is disabled and I can't go online. The only way I can do anything is in safe mode. I checked what has updated the day it broke, and there was an update to Microsoft Office 2003, which is odd, because we have office 2007.

  Help, please!

  Safe mode, see if you can isolate advancing the cause of your problem.

  310560 How to troubleshoot by using the Msconfig utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

  It is more than likely that you have picked up some nasty malware.  See if you can download (or have a friend download) and run one of these safe mode.

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/MBAM.php

  SuperAntispyware
  http://SUPERAntiSpyware.com/

  You could try Safe Mode system restore.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  What is the number of KB and descriptive title of this update "strange"?

• I dropped my laptop and now windows starts too slowly or not at all, except in safe mode.

  Hi people out there

  I dropped my phone a few days ago and now Windows, when started normally, goes ridiculously slow and then stops before he installed the sidebar.

  It still works in safe mode with networking and the other.  Then one of my friends suggested I just get my vista disk and re-install/repair windows.  However, I am currently in Poland, and my drive is in Scotland.  Is there a way I can solve these problems with my windows?  Can I borrow a disc from a friend?  I am really attached to money at the moment then, really, to take it to a store is very much a last resort.

  Can anyone offer some (very basic please) advice on what to do?

  Thank you

  Cardno85

  You can also have problems of material thanks to a fall!

  See if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to connect to the internet, except in safe mode

  I worked with the cable co and co wireless router and they said that I must have some settings on my computer that let me access the internet unless in safe mode.  It seemed to have happened right after that I tried to hang a new wireless router.  Once I followed the steps for the wireless router, I got a message that there is no internet connection.  I know that the modem works, because I can hard wire on my laptop and log in safe mode with network and be well.  There must be a setting that I did not find, but which must be modified to allow access to the internet the way "normal".  Anyone have any ideas?