SOME DEVICES WORK DOES NOT THEN STARTS TO SPARE

Similar Questions

• T400 does not then start on battery

  Title really sums it up. 3-year-old T400 starts fine while on the current, but on the power of the battery, no lights come on or anything when I press the power button. Initially, I thought it was the battery, but the new battery 9-cell, I ordered has not changed anything.

  When I open the power manager, it is said that the battery 6 cells of origin has 0.0 amps and 11 V. said the same thing about the battery 9 cells. I'm willing to bet against Lenovo me sending a flat battery, but everything is possible. I tried to uninstall the power manager and resettlement; same thing. I tried to reset the battery CMOS/backup. The only thing I have not tried is a restoration of the BIOS. Currently, using the version 3.22.

  System Specs:

  T400 w / T9400 processor and switchable graphics

  Win7 x 64 Pro

  Any suggestions would be very helpful. I would call Lenovo support, but most of what I found on CIHI points for them not being is not useful unless you are under warranty (which I am not).

  Thank you.

  If cleaning does not work, then your laptop motherboard is most likely the culprit.

• M4C63UA HP #ABA stream: a pilot missing and 2 devices work does not correctly

  So, I recently switched to Windows (32 bit) 10... My netbook has only 32GBs so I thought that I get more space by using 32-bit and I have a lot more now.
  
  But minor issues however, I can't seem to get the touch screen to work or find the drivers for it.
  
  I also have an invalid driver; PCI encryption/decryption controller.

  

  And I also have two devices in Device Manager when windows cannot load the drivers required.

  

  For my touchpad drivers I don't see whatever it is in devices that I think might be them.

  I appreciate any help on all the above problems although 32-bit is not supported. I imagine that the factory can support 32-bit. I got some updated drivers using the driver easy, but I can't seem to update these drivers.

  Hello:

  This should be the driver that you need for the E/D PCI controller:

  This package provides the driver Intel Trusted execution engine Interface (CITY) for the laptop models running a supported operating system. The Interface of the Intel Trusted execution engine allows the Secure Boot and provides services required for the security features of platform such as Intel Platform Trust Technology (Intel PPT).

  File name: sp72335.exe

  Touchpad:

  This package provides the driver that allows the Synaptics TouchPad in the notebook models that are running a supported operating system. The pilot turns the touchpad General (for example, double-click and scroll) feature and provides a user interface.

  File name: sp72339.exe

  Unfortunately, I can't help you with the problem of the touch screen.

  The graphics driver that control it.

  For the other thing of the Intel Atom, please view the hardware ID of the device.

  You can find that by clicking on the watch your screenshot Details tab, select the 3rd item in the drop-down (hardware ID) and after the string of characters that appear in the window.

• my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.

• T420 W7 Base system device driver does not

  Hello

  After reinstalling W7 the lenovo Solution Center complained by saying that the system device driver does not work.

  I saw that the SD card reader was not working and so I covered the missing pilot was that one.

  The Lenovo page I downloaded the driver for the card Multi for W7 and T420 port. After installing the message disappeared and SD cards have been recognized correctly.

  However, after restarting the system, after some time, the message appeared again and the card reader no longer works.

  I have install again and the same happened. He worked and after restarting two has stopped working.

  If find this mysterious altogether. I wonder if anyone knows how to solve this problem.

  I managed to solve the problem. Just in case anyone has the same problem I explain here how I did, although I'm not sure that this solution is universal.

  1 install the drivers from the Lenovo site.

  2. once the system starts to complain from the Device Manager where it says "Base system device" with a question mark. Then disable this device but do not uninstall the driver.

  3 reboot and it will be fixed.

• Webcam works does not in Studio 1535 with Windows 7

  Hello

  I have a portable studio 1535, it came with the Windows Vista operating system. However later on, I had installed Windows 7 Ultimate OS. My webcam first worked with Win 7. But for some time it does not work. I downloaded the driver for the Webcam (CREATIVE-LABS_INTEGRATED-WEB_A05_R207341) for vista from the Dell Web site. But when I installed it, at the end of the installation, it displays error message ""an error occurred during configuration of the driver.". I use the Dell Webcam Central software for webcam, when I run it displays messages "please connect a supported device".

  Please guide me to solve this problem.

  Thank you.

  Thanks for your reply. I tried the diagnostics and the other suggestion. In the end, I open my laptop screen laptop and found that plug a little besides that the camera wasn't attached correctly. I joined it and then reboot it installed drivers and now works correctly.

  Once again thanks for the reply.

• OR-Motion PXI Card Device Status = does not

  I can't connect with my motion NI PXI-7358 Controller card.  The general tab in MAX for the map shows that "Device status" = "does not" see the attachment.  I've not mapped and matched the remote device.  I also removed and re-installed PXI card without success.

  Hi Jeffmg,

  This seems to be a known issue. There is an internal knowledge base documenting this problem and a potential solution.

  The solution according to the KB article:

  "This problem can occur when a previous jury has been mapped to the host machine. The NIMtnSvr.exe is based on the ID Board and sometimes gets stuck. To resolve this problem, close any software OR run, and then open the Task Manager and end the process of NIMtnSvr.exe. This will disable the server and allow it to start again, the next time that it runs. When you open MAX, the boards will be displayed on the local host that is mapped correctly. »

  N

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• Creative cloud does not automatically start more

  My creative cloud application does not automatically start more. It worked fine for a year and a half.
  But although the box in preferences to start automatically is checked that it does not automatically start more.
  It does not appear in the system tray I must maualy double click the CC (which i put my office op) to start.

  I also had a solution ad put a CC shortcut in the windows startup plan but he strangely disappears each time.

  After I dubble click on the strats of application up normally and everything works fine, so no problems with programs or the application of cc
  It was simply not possible box Autostart to highest upward. I use windows 8.1

  Unfortunately this did not help either. What I did then, I unchecked the box run at startup and put a shortcut in the Windows startup folder. Since then, (3 days ago), he continues to work. Hope it stays like that.

• NB250/Device Manager does not recognize webcam

  Hello:

  I have NB250 with Windows 7. There is no indication of a webcam. Device Manager does not recognize it either. I know that there is a download application to search for it on my computer but I don't know where to look for it. Thank you.

  Post edited by: chizuka

  Check if the webcam is enabled in the BIOS.
  To access the press of BIOS F2 when starting the

• Lenovo Y430 - drive Optiarc DVD RW AD - 7640 S ATA Device dvd does not

  Hi guys,.

  My Lenovo Y430 - drive Optiarc DVD RW AD - 7640 S ATA Device dvd does not

  Its not reading any cds/DVDs.

  Please could you help me how to fix it

  Once am put any DVD that the DVD is flashing and after a few seconds, his flashing no more.

  Mine is under WIndows Vista SP2

  I checked the CD-ROM/dvd-rom drivers in its 'active' display ' device working properly "Device Manager and registry also to 'upperclass' or 'lowerclass' settings entry just good.

  Please someone help me how to solve this problem.

  Thanks in advance.

  Kind regards

  Rambeau

  ++

  @bjawasa is 90% out of material. Lenovo ask to change your dvd - rom with a new free of charge if you have the warranty.

  You can call the help line: hindi or English speaking - 1800-3070-0010 (Toll-free) or 1800-113-324 (Toll-free)

• WIFI doesn't work does not correctly after driver update

  I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.

  Problems...

  1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

  2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

  If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

  If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

  For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

  Best regards
  ERICO

• Device Manager does not display c or D drive.

  The Windows Device Manager does not display the drives c or d.  With File Explorer, they show and are easily accessible.  What's wrong?

  Hi Alberini,

  You would actually use the Device Manager to determine which devices are installed on your computer, update driver software for your devices, check to see if hardware is working properly and change the hardware settings. You can also use Device Manager to update a driver that does not work properly or restore a driver with its previous version.

  To view the files or the drive hard internal to your computer, would use you Windows Explorer.

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• AutoComplete doesn't work does not after installing IE *.

  AutoComplete URL function works does not after installing IE8.  Looking at the Advanced tab properties IE I see an option to use AutoComplete (which is
  ticked off) but it is said to "..". turn of Internet Explorer".  Whatever that means, and how I seized not semi-automatic work again under IE8?  I can go back
  for IE7, if it's the only way.   I tried to hit "reset" on the Advanced tab I saw a thread on try this - but no go...  Thank you

  sjakulski,
  Thank you for visiting the Microsoft Answers community forum.

  In Internet Explorer 8, the Auto complete option is in a new tab.  Go to tools, Internet Options and then click the content tab.  You will see a section that says "Auto-Complete".  Click on the 'Settings' button and it gives you several choices of auto complete options.

  This should solve your problem.  Let us know if you need more information.
  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: This page cannot be displayed - the remote device and does not accept the connection. (! found)

  * Original title: this page cannot be display the remote or unit does not accept the connection. (! found)

  My internet connection works very well, I'm trying to access a page of my gate of the school we use to complete missions. I can access my web page of schools, I can access my e-mail from the school, but I can't get the e-portfolio page. It says cannot display this page - the remote device and does not accept the connection - (! found). He said to ensure that the TSL and SSL in the advanced internet options security part turned on who they are, my better protected as well the mode. I've never had a problem accessing this page before. It is only this page! Help!

  Hello Teresa,.

  The probable cause of this problem could be due to wrong settings for internet explore.

  Please see the link below, Windows 8, follow the steps to check the Proxy and DNS settings
  http://support.Microsoft.com/kb/956196/en-us

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this helps, please answer with the results for assistance.