T400 does not then start on battery

Similar Questions

• SOME DEVICES WORK DOES NOT THEN STARTS TO SPARE

  I have recently upgraded to Windows 8 Windows 7 and now I'm having this problem.

  At the start of some of the features not working and not see the same in the Device Manager. As some of start, Bluetooth and webcam does not work, on another USB port isn't working and sometimes all the these do not work.

  One thing is that only USB 2.0 does not, while the USB 3.0 ports work and it is a SIGN of TILT on the 2.0 device in the specific DEVICES MANAGER. But when I turn off and turn back on, it works fine but I can't do something on the Bluetooth device or the imagery.

  My PC is DELL INSPIRON N5110. I have already updated all the drivers from the website of the manufacturer for Windows 8.

  Help, please!

  I would try to disable the quick start System.  This QuickStart uses a special kind of hibernation of driver that is not compatible with all devices and drivers that have been built before Windows 8.

  You can go to the control panel (press Windows + X to get there easily), then Power Options to disable it:

  

• Satellite Pro 6100 does not recognize the single battery external power

  Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

  By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

  I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
  Any ideas?
  Concerning
  Phil

  Hello

  Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
  In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
  The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

• Creative cloud does not automatically start more

  My creative cloud application does not automatically start more. It worked fine for a year and a half.
  But although the box in preferences to start automatically is checked that it does not automatically start more.
  It does not appear in the system tray I must maualy double click the CC (which i put my office op) to start.

  I also had a solution ad put a CC shortcut in the windows startup plan but he strangely disappears each time.

  After I dubble click on the strats of application up normally and everything works fine, so no problems with programs or the application of cc
  It was simply not possible box Autostart to highest upward. I use windows 8.1

  Unfortunately this did not help either. What I did then, I unchecked the box run at startup and put a shortcut in the Windows startup folder. Since then, (3 days ago), he continues to work. Hope it stays like that.

• Why Apple does not have a backup battery for Apple devices?

  Why Apple does not have a backup battery for Apple device? Recommended us that of our full when we are on the road, so they should do a backup battery for their devices instead of other companies do. The backup battery that I use for my iPhone 5 c don't let my phone screen timeout as he does when I'm with the regular wall charger. Can anyone help?

  Consult the manual for your backup battery.  There should be a switch or a button to activate the phone load.  It should not be left in charge mode all the time because the phone thinks it has unlimited power when charging, so disabled several energy-saving features (like display sleep, closing a connection Wi - Fi when he sleeps).

• WiFi does not work on the battery!

  Hello

  I am running Windows 8.0 (64 bit) and my wifi does not work properly in battery mode. AC adapter, it works 100% perfect but in battery operation, it always goes to limited connectivity. He repaired, but 25seconds later, he gets the same problem. Limited each time connectivity. It's a never ending cycle warranty has expired and I am not happy with it.

  Even if repaired, impossible to open any website. Full 5 bars wifi but still the same result. Tried manually (TCP/IP IPv4 settings) but did not work at all.

  My wifi driver is Intel Centrino Wireless N 2230 (15.12.0.6 updated version of the intel.com site).

  C2Y46AV product number (HP ENVY DV6 NOTEBOOK PC)

  Serial number [thank you for visiting the Forums from HP Support. I'm sorry to inform you that your message needs some changes to remove personal information].

  Tried everything that I could possibly think off such as disabling firewall windows Norton Firewall & Running but still the same problem.

  Can you please tell me what to do?

  HP update.

  Can you please provide a solution for this.

  Thank you

  Navaid involves.

  Hello Ophelia-involves.

  Thanks for posting on the HP Forums!

  I understand that the computer has problems connecting to the networks without wire on the battery life. I'll do my best to help you! After some research, I actually found a Microsoft document that contains the steps I would have provided for your problem: you may experience problems with connectivity or performance issues when you connect a portable computer that runs Windows to a wireless access point

  Please try these steps and let me know what happens. Thank you!

  Mario

• T400s does not start after cleaning the keyboard

  Hello. I cleaned by T400s keyboard today after a few juice reaches the keys and the laptop does not start anymore. I removed the battery and the power cord, tried to deceive the 10 times, press the power button / stop, no still no results.

  Reset the CMOS does solve the problem?

  At first glance it seems that the laptop is powered LED fingerprint reader is turned on, but it turns off as soon as I unplug the charger.

  Any suggestions? Thanks in advance.

  This probably means that your keyboard is dead and need a replacement, which is pretty cheap from ebay.

• T400 does not start after the first display screen

  What is going on? I have wss to work today and my computer shut down due to the low batt. I got home and plugged in and waited a few minutes and turned on. When I checked swipe my fingerprint, all that I saw the first startup screen told me I want to interrupt normal off set up that I can close the button think vantage. It is stuck there. I can activate it on and but it does not start after that screen. What can I do? I am in the middle of the drafting of the report and cannot access my docs!

  I looked the problem and found that have been in contact with the usb pins! Yay the prob is fixed!

• Satellite A100 PSAA9C does not work without the battery inside

  I'm having a strange problem with a laptop Satellite A100 (PSAA9C-SK900E).

  The machine will not work without the battery in it. If the power supply is connected in the machine and the wall, it will power without the battery installed. If I install the battery, let it load completely (battery LED goes from orange to blue and the plug LED is blue) then start the machine it will work for a period of time (more than an hour depending on what I'm doing) then suddenly turns off.

  If I restart the machine, it will work for a very short period (sometimes only for a few minutes) just before going off.

  If I do this a couple times, the machine will be not even by post before turning off.
  If I let the machine to recharge, it runs for a while and then do the same thing after using it for a while.
  If the battery is pooched, which is fine with me. How to operate with only the power supply of the machine?

  As I type this I'm suspecting that the adapter cannot be taken out the required voltage/amperage. (adapter is not still hot when charging, are my other laptops) Any suggestions would be greatly appreciated.

  Thank you.

  Hello

  If I understand your assignment, the laptop does not power up without the battery
  But it will light if the battery is connected.

  The question is; Is the power led on if the AC adapter is plugged?
  If this isn't the case, then it means that the power adapter is faulty and so the laptop cannot be turned on by using only the AC adapter.

  I think you should test a new adapter. Maybe it helps!

• AC adapter does not work if the battery is not removed on my Satellite?

  A few days as my Satellite does not use electricity from the adapter: he wants to only use the battery (so after a few hours, it stops).

  Connect and disconnect the power supply when the notebook is on or before restarting, it doesn't change anything (if the battery is always in its place). The power adapter, cable spines,... seems in good conditions and I don't think they have problems because when I remove the battery and restart the laptop, the Satellite finally understands that he must use the power supply and not the battery. Then I can put the battery back in its place and load it... But if I unplug the AC adapter, the circus re - start.

  Is power off somewhere? Is there a place where you can choose: "always use the battery and not the power?

  I don't think so, it's a motherboard problem?

  Hello

  It is not easy to say why it happens. For me, this looks like an electronic malfunction of power supply.
  But it's only my suggestion to be 100% sure that some diagnostic tests are necessary.
  But the battery is ok and AC adapter works as well as you suggested.
  What you can do is to check your BIOS version and compare it with the BIOS that is available on the page. Is there a newer version, so you can try to update.
  Note: Be careful! Bad BIOS and update wrong procedure can damage the laptop.

  But if you use the latest BIOS, so I think it must be a hardware malfunction. In this case, the only way to find the bug is to ask the AEP from Toshiba in your country for help.

• portable computer does not support. Yet battery monitor says "plugged in, not support.» What are some options?

  my laptop is connected, and yet power monitor says "plugged in, does not support." What are some solutions?

  Hi Joseph,.

  Something similar just happened to me. The first time they fixed it, they have replaced the adapter and the problem is solved. 5 months later it started to happen again and this time they replaced the battery, the motherboard and the milling table (thanks to heaven, it is still under warranty). Fortunately, thanks to the new adapters, battery started to load and the experience does not seem to damage it in any way (but you should keep your eyes on it anyway just in case).

  How they were able to say on my laptop - a Dell E1705 (other than just experience and common sense) was to go into the BIOS (starts, it should be a brief Flash on the screen telling you how to enter the BIOS setup or menu of the BIOS (usually F2) and check the battery information. He showed that the power adapter 'unidentified' instead "90W" list which should be when it is working properly and that the battery was not complete and not charging well plugged. They changed the motherboard and the roll the second time because it could also cause the adapter is not being recognized by the battery (or battery not not recognize the adapter).

  The beep is caused by power and its configured settings to warn you of a low and critical battery condition. In a normal situation, the computer will work right next to the power adapter and does not the battery (it is a way to help maintain the battery life is to run periodically and refill if we leave normally plugged in most of the time). If you remove the batttery entirely, the laptop will power? If this isn't the case, it is certainly at least the adapter or the motherboard. Eventually the battery will get if low, that he's going to sleep or hibernation, or the system stops (you should shut down normally before him to cold shutdown like that). If If, then I expect the tone to go further because it will detect is no longer a low battery charge, because there is no battery - but then you'll want to be sure to use either a battery backup UPS, or at least a surge protector otherwise already in place because if you lose the laptop battery will crash hard and this is not good for her.

  I'm using 32 bit Vista Business SP2 and in Control Panel / sounds / Sounds there is an option for low battery alert. The default to have this. In this case, you can turn off to avoid the beep. In addition, you can go into Control Panel / Power Options, click the plan settings and click on battery. It will provide you with levels of low battery and critical battery and you provide measures to be taken in such a case. If you are unable to operate the system without battery and it is so weak that the alerts began, you probably fell to 11-5% remaining. You can adjust actions to nothing for bass and stop to criticism that 5% is about as close as you want to get to the point where you can hang. Then, you just need to wait until it is repaired and the appropriate parts are replaced.

  Even if you have still some life in it, it is best to contact the manufacturer (they the some have the right parts) or a computer of reputable workshop to get a good diagnosis (perhaps by phone at first), a determination of what must be fixed, the applicable fees, schedule, if it is still under any kind of warranty , and what needs to be done in which order of repair. They can find the adapter is OK and it is just the battery (or vice-versa or two or more). But that's essentially where you need start.

  I hope this helps.

  Good luck!

• Dell Inspiron does not fully start

  I have a Dell Inspiron 530 s with Windows Vista Home Basic. Last fall I had restored it and after that, it worked perfectly until about 2 months ago. After that I turned on the computer, it goes to the Dell logo, as usual, and then after that, it gives me a message saying press F1 to continue. I would tap it, then he would show a black screen with a flashing underscore. After a while it would not boot as usual. Recently, when underscore no longer blinks, he asked no longer to start as usual. It gives me a message saying that no boot device is discoverable and press ENTER to try again. I'll enter, but the same message arrives. I'll have to then turn off and on and keep pressing F1 until she FINALLY begins. With the changeover days, it takes more time and more time so that it can start and enter the Windows logo. I'm afraid that one day, it just won't start. I tried and tried looking for my problem but I don't know what it is. One popular response that came was my CMOS battery may go dead. So, I went and bought this past weekend. That didn't solve it. It still does start all the way. I also can't access the Menu ahead of time by pressing F8. I notice that rarely my computer will lead me to the Boot Manager to start upward on its own and from there I can start Windows normally and it starts without a problem. But I don't know how get you to this page manually. By pressing the bar space does not either. If I keep just press these keys, my computer makes a noise clicking / beep and nothing more. I was also wondering if a restore factory could get rid of this problem and make it again fresh. But again, one of the conditions for a factory restore is to disable and press F8 for Advanced Options and he won't be on the menu for me. So I'm stuck pretty well.

  Overall, my problem is that my computer initializes more normally. I have to keep turning market until he finally gives in which case it can take hours. I desperately need help. I hope that I was fairly accurate. My computer is no longer under warranty and I can't afford any premium or other security package. Please, it's my only computer, and that's all what I have to work with. Thank you.

  Hello

  A computer is supposed to make a single "beep" at startup.

  If that in fact more than one, this indicates a hardware problem.

  You will need to go to the Dell website and know what BIOS that you have in your computer model.

  Then check in these links 'beep' error codes know what hardware has problems.

  http://www.pchell.com/hardware/beepcodes.shtml

  http://www.computerhope.com/beep.htm

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  See if this helps you to know what is the problem.

  "The computer does not start in Microsoft Windows Vista"

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_343119&isLegacy=true

  Using Dell Diagnostics:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=52057

  Cheers. :

• HP Pavilion dv6-3103sa: HP Pavilion dv6-3103sa does not then illuminate that plugged

  Hi - my HP Pavilion dv6-3103sa has recently developed a fault.

  It lights up with the power cable connected to it.  So that the laptop starts I have to first remove the power cable.

  Similarly, before you turn off the laptop, I need to unplug the power cable.

  If I leave it plugged in and turn off the machine, I can't start at all. The solution is to remove the power cable and the battery, then replace the battery only and then turn on the machine.

  I also noticed that with the removed battery and the power cable is connected, the laptop does not start again.

  Watching the light next to the power cord plug when plugged in the cable it quickly flashes of white, to orange, then back - tell me no power isn't learning laptop in this State.

  I also tried a different power supply with the same intensity from a mobile phone of similar work with the same results.

  Please notify.

  @ScatchyMonkey,

  Hello and thanks for the display on the HP support forums.  The problem you are having is with the motherboard.  There is a part that regulates the power and allows the system to know if it is connected or not connected and if it failed, you will need to have it sent repair.  Here is the link that will help you communicate with the correct service.

  Contact HP support.

  Thanks again for posting and have a great day.

• Satellite A30 161 does not work when the battery is installed

  Hello

  I have a problem with my Satellite A30-161. The laptop works perfectly without the battery installed. With the battery installed and the AC adapter plugged the power supply and battery (light orange) are turned on.

  When turn on/off, as soon as WXP loaded the battery light turns off and the laptop turns off. With battery only laptop does not start. There is no dirt on the heat sink and it doesn't seem to be a problem with the connector DC and power lights still on.

  Any ideas?

  Hello

  This behavior is not easy to give an accurate diagnosis, but according to your description, I assume that there is a problem of electronic power supply. Just using special diagnostic tool, it is possible to check if there is a problem serious.

  To be honest, I don't think you can do it alone. The only thing you can try is to test it with new battery. Maybe you should contact the service authorized in your country. talk with them and you will see what they say.

• Satellite L300 - does not successfully start Vista

  I have a Toshiba Satellite L300 when I boot it it goes directly to the Boot Manager screen where I have to start it manually. Once it starts it does not work correctly until I click on the Quick Launch button to stop scrolling up and down line.

  I have a full recovery of the system twice, but I'm still having the same problem.

  Can anyone help?

  Hello

  To be honest I don t understand what you mean exactly
  What happens if you press F8 immediately after the laptop has been power up?
  You can see the Advanced Boot Menu?

  If so, then try option called last known good configuration.
  If this does not help try you safe mode.