Some items displayed is not properly after a while.

Similar Questions

• My startup list is who actually take each to start. How can I delete some items that do not need to be started

  My startup list is who actually take each to start. How can I delete some items that do not need to be started

  Hello

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Context menu (including all the other menus) does not work after a while.

  I use ubuntu 12.04 LTS, 33.0 firefox (thunderbird also same problem).

  Context menu and all menus are not works after a while (maybe 30 min)?

  I have to close all firefox windows to make the menus work (make an another new firefox windows does not solve problem)

  The problem this menu would not be displayed (menu popup and also normal menus) have not been reproduced approximately 2 days.

  I have not try your solution because I had planned to try your solution after I encounter the problem again.

  Only difference when I got problems with menu meets it is that I ran firefox from terminal invites no task bar of the unit...
  (I expect to capture some bad newspapers of the terminal prompt when I encounterd new menu problem)

  Maybe it takes other hours or days before I met the new problem or there is a possibility that I could not this problem again until I do some changes (restart firefox from unity...)

• Monitor display is not properly in Windows XP sp3

  Original title: Windows xp sp3 does not properly

  Hello, I do not know if this issue belong to the material division of the forum. I have an old system who have windows xp sp3. It was working fine until week couple but after a few days when I switched it on the screen is not displayed correctly.

  All the colors randomly displays as a spot on the screen and the other letters in a sentence is missing. I tried in safe mode with just visible in debug mode, but it doesn't happen in the journal to the screen. I can not even reinstall windows xp. Now I'm not able to understand if it's the problem of the operating system or a malfunction of certain components of the computer. Please help me.

  Thanks in advance.

  Hello

  Method 1:

  I suggest you to start the computer using the VGA Mode.

  (a) restart the computer

  (b) press F8

  (c) in the start menu

  (d) choose the option

  (e) activate the VGA Mode

  This option starts Windows in mode 640 x 480 using the current video driver (not Vga.sys). This mode is useful if the display is configured to a setting that the monitor cannot display.

  Reference:

  To start the computer in safe mode

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  If you are able to start the computer using the VGA Mode, you can perform a system restore to the date where the computer worked well.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  If you use system restore when the computer is in safe mode, you can't undo the restore operation. However, you can run System Restore again and choose a different restore point if any. You can also create Safe Mode system restore points. System Restore affects the Windows system files, programs and registry settings that have been changed recently. It can also make changes to scripts, files, batch and other types of executable files on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file.

  If the problem persists, you may need to contact the manufacturer of the monitor to the stand.

• Satellite M100-164 display does not illuminate after hibernation

  After the computer wakes up from hibernation by lifting the display panel (cover) and the LCD screen turns off due to power management settings, display shows the Toshiba logo and does not return after a key is pressed and the keyboard is not responding.

  I turned - power & removed the battery without success-.
  OPS: windows XP.
  Help, please.

  Hello

  You have removed the battery but wait you a bit?

  If please plug the laptop and remove the battery.
  Wait 15-20 min and then plug the AC adapter and put the battery in the laptop.

  Then try again!

• Time scale does not properly after separation of the two signals of virtual channel

  Hi all

  I have a problem when I use a virtual channel with two analog inputs. I'm cutting the two signals into two separate tables of waveform, as shown in the attachment. The two signals seem to be reading very well, the problem is that the time scale (x-axis) begins to act on the strange. Seconds displayed time seems to keep jumping up and down at a high frequency, resulting in the two signals of displayed does not correctly in the table of waveform. Could someone please try to help me? Any help would be greatly appreciated!

  Thanks in advance.

  Try to acquire a signal with first time information. You can replace the DBL 2D with a data type of 1 d wave. You don't need this code extra silly - just a function of Board Index to get the separate channels.

• Files PDF and video displays do not properly on Android (v28)

  Hello! I'm working on my first multi-folio application specifically and exclusively designed for Android devices. I seem to be two problems that I was hoping someone might have an idea on.

  1. I have several PDF files which are a hyperlink in the document. I have saved the files in a folder HTMLResources and downloaded the file .zip on the folio. For some reason I'm not able to view the PDF files when I click on any of my hyperlinks. I just get a blank white screen. I thought that the PDF support has been added to the latest version, which is not the case?

  2. I have also several videos embedded on some pages. Although the videos play in the drive in application and I have put videos to play fullscreen, videos are still very low. Please see my screenshot to see how dinky it looks. The native resolution of these videos are small, but I thought they would be to evolve to adapt to the device. Yet once, is not the case?

  Thanks for any comments.

  

  Unfortunately, a link to the PDF files is not supported on Android devices. This technique only works on iOS.

• 5.0 ESXi hosts all say "not responding" after a while

  Hi all

  First of all, yes I know this is a repetition of something that is posed before but I tried all the resolutions that I can find - nothing has worked so far.  In the vSphere client, all hosts currently have a status of "not responding". For reference, however, here is what I have tried/checked so far:

  -vCenter and ESXi are all in evaluation mode.

  -I do not use the brand HP ESXi ISO (as referenced by http://communities.vmware.com/message/1852500 more numerous other positions of the community).  Material * is * HP hardware, though.

  -Change of the security policy of vCenter Server (as referenced by http://communities.vmware.com/thread/271809).

  -Go through all checks VMware published listed in http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003409.

  -Network connectivity verified using PING, nslookup and telnet on port 902.  All ESXi hosts respond on port 902.

  -AD DNS monitoring verifies that all say "Pass".

  -There is no firewall on the network (it has physically isolated from everything, including the internet... obviously I am writing this post on another network).

  -Direct connection to the ESXi hosts works very well - this only happens when connecting through vCenter (so running virtual machines are available and usable without any problem... There is no HA).

  -/etc/VMware/VMware.LIC has a license of '0' key (confirms the status of the evaluation, I think).

  -/etc/vmware/vmware.lic mode is the following... - rw - T.

  -All hosts are on the same version of ESXi.

  -There is only 1 Server vCenter.

  A strange thing is that some items, including VMware ones, say to run 'rpm' and 'service' in a variety of different ways.  'Rpm' or 'service' are valid commands on my ESXi servers.  This seems odd, unless ESXi 5.0 withdrew these commands to the shell.

  Can anyone suggest anything else that might be the cause?

  Thank you!

  If VC is virtual and the problem that happens on the same ESXi what they are and all on the same subnet, I am almost sure that something on your windows it blocks. Check the steps in KB http://kb.vmware.com/kb/1029919 to try to discover what is happening.

• headphone 3.5 mm jack does not properly after update iOS10

  Headphone Jack is not working properly since I have updated to iOS 10, now on 10.0.2, before you start, I would say that my headphones work perfectly, I tried on other equipment, including my old ipod.

  So, here's what happened, whenever I plugged and you try to play a song on music or a video on youtube, I could not get any audio, restart the phone partially solve the problem, I managed to play ringtones in the settings menu without any problem, on both my headphones and loudspeaker at the same time , which I don't know if it is planned, I think it must have something to do with some bugs in iOS 10?

  someone at - it a similar experience or a solution?

  Hi oramicle,

  On the device that you have a problem? I also have this problem on the iphone 6 s. On two different helmets. It's certainly iOS 10.x, because I don't have this problem on the same device and helmet on iOS 9.x. I sent the bug report to Apple with this description:

  After some headphone output (jack 3, 5mm) at the moment does not work on iphone 6s 128GB, iOS 10.0.1 and 10.0.2 - no sound from the headset. Volume controls and MIC still works. When I make a call with the headset plugged and tapping on the microphone, I hear sound for headphone listening, but the others its not. No noise in other applications. Restart the temporary fix of the device this problem.

• Re: x 505-"turn off the display" does not properly

  To make a long story short, I had a load of problems with my Toshiba Qosmio X 505. I talked to tech support and they had me completely clear the computer and reinstall the OS. Everything has been fine for days until today!

  For some reason any whenever my screen turns off (for energy saving), I can't get my computer to respond. I don't know if he's asleep, going into hibernation mode, or even the difference between one of these things, but when I press the buttons, move the mouse/Touchpad, try multimedia keys, the power button, nothing makes my computer come back. I have to hold the power button / stop and completely restard come back again the computer.

  Why is this happening? It worked great for everyday, but I think it has something to do with the NVIDIA driver update I downloaded. It is the main change I have made to the computer yesterday and now it seems to do. Does anyone have recommendations? How can I make my computer stop doing that? I have all the options of my black screen off for now, but that does not seem a good solution for this problem that he used to work properly.

  Hey,.

  Akuma is right, you should only use the display drivers provided by Toshiba and not nVidia. The nVidia drivers are not pre-tested and that's the reason why they can cause such problems. Also they don t have an overheating protection, installation happens on your own risk.

  If you need to test it with the drivers from the official website of Toshiba. Prior to installation, remove the current display driver, and then restart the computer. Then you can begin with the installation of Toshiba display drivers.

  In the worst case it of necessary to reinstall the whole system again, but before that, you try a system restore to an earlier point.

• Windows Windows 8 does not properly after deleting important files to user (already tried everything I found things different from +-10)

  well, I'll start from the beginning.

  the first big mistake I did was change the permissions of the administrator until he was the same trustedinstaller (without this I wouldn't do stupid things, but I did it for a change of details in the registry)

  the strange thing that I've been in conflict with, is that this pc was my mother, so everything to his e-mail address and his name 'Nancy' after some time she gave me the pc so I made my own top user account named "maxim" (that's my name) on my email address and probably deleted the user account from my mother named Nancy so no problem until something has started to bored

  the usersection in solution under C: contained Explorer still card Nancy with some of its documents on the left and some (I have something windowsrelated files)

  so I thought why not remove that card and saw that a card with my name was there too in the usersection, these same unknown files which I think are windowsrelated (btw, these files were hidden but ofcourse to check everything I have chekced the area to see hidden files in Explorer)

  I know not the name of all the files that I have demolished within this named Nancy in user card, but as far as I know, is that files that I noticed (these hidden files) are 7 files ntuser and those who are also in the plan named maxim in this usersectionso I thought no problem and delete the files as managed (with edited permissions)

  now I certainly delete files that I wasn't allowed to, and who were required to run windows properly, I know that, because of the errors, I am when I try to start things or when I try to fix things

  now I searched a LOT on the web especially in the microsoft forums and I fount a lot of 'solutions' that did not work for me

  most of the time, it was because I get an error because I could not more process these configurations etc.

  and somethimes as the scan SFC, he said that the correction of some problems, but there are many problems left that cannot be repaired in this way

  also almost everything I'm doing atm (also when I try to fix my problem) that I have to do with a big traverse most of the time I use "this run dialog box" or the command prompt

  now, these are all the things I tried

  -each 2013 thing tuneup utilities can do (scans included registery) of course I don't know the exact names of the files important I lost so I couldn't those used with tuneup

  -do you have some full scans with Norton 2013 (did not find any problem)

  -does this scan SFC and said there are still problems and has not noticed any difference

  -tried to update my pc did not work (missing windows services)

  -a tried to restart something in the registry did not work (missing windows services)

  -tried to make a new user on my pc did not work (missing windows services)

  -also tried lots of windows, fix things program (I forgot the name of it, but he could only tell me that he had problems and could not fix their)

  I'm shure that I have tried many other things so I mentioned in any case but I forgot the

  Many thanks if someone can help me out as sorry for the great story, but I wanted to tell all I know because it's a sensitive issue and please don't mind my bad English :)

  Maxim

  Your Windows product key can be printed on a label located on the underside of your laptop, if you don't you won't have it. Using the recovery partition, it is a good idea if you have no recovery on a disk media, often there is a Windows repair option, you can try this, however if there is no data on the first partition that you interested, I recommend you just format the partition for essentially erase everything on it and reinstalling Windows on the recovery partition. This will probably not require you to reactivate Windows by using the product key.

  If you cannot use the recovery partition to reinstall Windows, then you can go to this page (on the computer that is working properly) http://windows.microsoft.com/en-us/windows-8/upgrade-product-key-only and click on install Windows 8, save the file, run it and choose Install by creating media. This you will get an ISO file that you can burn on this disc you mentioned, just put the disc in your computer, right click on the ISO file and choose burn. It should also not ask to reactivate Windows, if you did no major hardware changes to the computer.
  Again, I would like to know if you need help with any of these steps or if none of these steps work for you.

• The Satellite A200 display does not illuminate after being idle for 15 minutes!

  Hello!

  I just bought a Satellite A200 1 - AX PSA6 and install Windows XP SP2 + upgrade of bios for winxp.
  After 15 minutes of unactivirty (no not pressing the keys or moving the mouse), I set in power options in Control Panel - what must power OFF display.
  After this time display is switched off (black)!

  But I can't wake up my laptop!
  I'm press any key or move the mouse, but the screen is always black!
  But laptop works!
  I can ping and then by network or remote access connection.

  One way to solve this problem:
  Laptop open and close!
  A200 - "standby mode" and wake up with swithches on screen...

  Hello

  It seems that Windows XP Home edition does not work perfectly on the new laptops designed Vista. Before you live your laptop try to change profile settings (extended battery) power and test the parameters of this profile.
  Tomorrow I'll try to install Windows XP Home on my A200 and I'm really interesting if I even notice.

• Acer X 1930 works does not properly after the factory restore

  It did not work correctly since the restoration of my desktop Acer X 1930 under Windows 7. Now, it shows: "configuration of the Windows updates failed. Returning from the changes.

  Could someone please help?

  Hello, I had problems even when I went back to 10 Win7... The only way I could make it work just is for the first few newspapers in I had to restart my system rather often. I know that this is not a SOLUTION but is what I did...

  Load Windows 7, let the updates for about 3 minutes... I first tried 8 mins but still many updates. So 3 works for me... I am also connected on wire on a Giga lan with Ultra fast connection to my ISP... So time could vary for you...

  After 3 minutes, I had 20 to 26 update ready to be used. Restart the computer. They worked. Makes about 3 times. ON the 4th time I down load 90 updates to see if it would work. And he did very well. Then after that, I went to look at the missing updates to ensure that they were going to update or had... added some that were OPT... on on the last 50ish and they have all updated very well. But for some reason, if I let all try them and update from the beginning, they would fail. I think it's because they have tried to put in the updates before others will want that needed to be done first...

  I do not work for Microsoft or Acer and it is only first hand from one of my systems. This isn't a fix only my way to make it work.

  So if you have a connection interent fast and no more wireless I would say that for the first time you start your computer just let it run for a few minutes then go to the Start button and restart so you do a little at a time...

  I would like to know how it works for you...

  James

• Everything on my screen is enlarged, and some windows/programs do not properly fit because of that. What can I do to fix this?

  I restarted, taken the battery, stop down and the problem persists. All my documents are completely expanded, I opened all the windows looks as if it is enlarged, but it is not. If I click on the maximize button, the window half fits on the screen.

  You have poorly defined display resolution. A few reasons that this can happen:

  1. a person has played one more game and the game reduced the resolution.
  2. that you have installed a video driver from Windows Update by mistake - and it is always a mistake.
  3. the video card is a failure.

  Since you did not provide a response to the first Question (see below), I can't guess what happened.

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  Try to set the resolution to the correct according to the instructions below. If this does not work, post is back with the answer to the first Question and some information about your computer (desktop? laptop? video card? monitor make/model, if your desktop?).

  1 start Orb > Control Panel > appearance and personalization. Click personalization, click display settings.
  2. pursuant to the resolution, move the slider to the resolution you want and then click on apply.

  MS Windows help - change the resolution of screen under Vista:
  http://windowshelp.Microsoft.com/Windows/en-us/help/0386b009-5F30-45c7-80c8-ff0395cc24091033.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• Computer takes forever to stop + display does not properly

  Hello

  My computer began to take a long time to shut down (10-15 minutes) and then crashes with blue screen of death...

  Also when it comes on sometimes it loads but I have no display and my screen goes to power saving mode

  If I reboot, it takes forever to shutdown, then crashes, restarts, and the screen does not work until I'm physically hold the power button to turn off and then turn it on again, then the display works fine again. This only started happening in the last day or two, after I did a system restore.

  Any ideas what could be the problem?

  Thank you, Dan

  Hi Dan,.

  ·         You receive an error message or error on blue screen code?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1:

   

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Please see the following articles for more information on the set of the computer:

  Why my computer won't turn on or off quickly?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-wont-my-computer-turn-on-or-off-quickly

   

  Demo: Smart ways to turn off your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-smart-ways-to-turn-off-your-computer

  You can also see the following article for more information on improving the quality of display:

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

  Let us know if that helps.