SONY VGN-NS30E PARAMETERS AVIO

Similar Questions

• Sony VGN-AR320E laptop webcam CC4 does not work. error code 10

  Hi all

  I have sony VGN-AR320E laptop. Just reinstal windows vista. Webcam does not work. gives me an error code 10. I tried to reinstal driver, looked online, could not fix. In Device Manager it says "this device cannot start. (Code 10) »

  I appreciated all the help,

  Hello

  Error code 10 is issued when the operating system knows exactly what went wrong. The result of this error is a hardware failure. Sometimes, it might be due to viruses, to which you can scan your system and take off from these infections. But the most likely reason would be some registry errors. You can use the registry scanning software to run a test on the box and they can automatically correct the error.

  More information for sony vgn-ar320e laptop 10 difficulty error code:

  http://supportforsony.iyogi.com/VAIO-CW-series/error-code-8.html

  Hope this helps you.

• Sony VGN - CR220E Webcam does not work after installing windows 7

  I recently installed windows 7 (not updated, clean installation of windows 7 on my Sony VGN-CR220E, and now my webcam does not work.

  Have already tried the tricks I know and searched the web and there are many others having the same problem, and there are number of recommended suggest solutions. Have tried several of them and has not worked for me after 2 days. Can someone who has actually had this problem and managed to fix it, please let me know.

  Thanks in advance...

  install http://esupport.sony.com/US/p/swu-download.pl?mdl=VGNCR220E&upd_id=5051&os_group_id=6

• Startup and shut down problems on Sony VGN-AR51SU laptop with Vista Ultimate

  I have a Sony VGN-AR51SU laptop which has Vista Ultimate preloaded when it was purchased. The windows product key is noted on the underside of the computer.

  The computer is configured to close, either by closing the lid or will the icon start then shut down. I don't remember which option I used to shut down the computer.
  However when I press the power button the computer immediately emits three short beeps. The hard disk icon flashes as if it is starting, but the LCD display remains black and never even a blue screen comes. Devices powered by the computer the light upward.
  Eventuallu the hard drive icon will stop blinking.
  When I put the cover towards the bottom of the computer behaves as if it ends and all devices close but the power of the computer remains on, regardless whether I am with the main power or battery.
  Obviously I can not use the starting/closing track that I have a black screen.
  I tried all the options to remove lead AC and battery close and all devices, then re-boot just on AC power or battery or any combination of these options, etc etc etc and nothing makes a little difference.
  I keep my system and software updated and this problem was one of sudden nature IE. OK one day then the problem the next time I turned on the computer.
  Make three short beeps on start uo and the fact that the screen remains black gives a clue as to the problem?

  Hi Taked,

  This seems to be a hardware problem. You must contact Sony support for assistance on the issue.

  Contact Sony technical support

  http://eSupport.Sony.com/us/Perl/select-System.pl?Director=contact&SR=NAV:support:Electronics:contact_support:ESUP

• Sony VGN-FW31E of eye movement does not work.

  My Sony VGN-FW31E of eye movement does not work, when I use the webcam it always shows video service bluetooth does not work. How can I get help from sony or other means?

  Thank you

  Evelyn

  Hello

  • Did you change your computer?

  Method 1

  I suggest you to follow the links and check out them.

  Check the status of the webcam in Device Manager?

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  Uninstall and reinstall the webcam from the Device Manager.

  You must be logged on as administrator to perform these steps.
  a. open the Manager of devices by clicking the Start button, click Control Panel, click System and security, and then, under system, clicking Device Manager. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. in the list of USB devices or imaging devices locate the webcam and make a right click on it and then click on uninstall.
  c. restart the computer and webcam again, he will be re - install it back automatically.

  Method 2:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you still have problems, that I suggest you contact Sony center and check.

  http://eSupport.Sony.com/Perl/support-contacts.pl

• I have a sony vgn nr460 and does not record the disk hard dvd

  I have a sony vgn nr460 and the dvd drive not registered when tried fixit said the driver lack an updated sony driver and device thing Control Manager even said installation driver fail can someone help me

  Hi dexlyndon

  1. What is the complete model of the computer number?
  2. are you referring to the DVD drive as DVD drive?
  3. do you think that no matter what error code indicated in the device properties in Device Manager?
  4. what fixit did you run?

  I suggest you to run the fixit from the following links?

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Sony VGN-AW41ZF "devices and printers" does not display anything, but they work

  devices and printers doesn't ' display anything, although all devices work.

  The reinstallation of the computer (sony VGN-AW41ZF) and add the devices, they have been posted.

  Later, we don't know why, "devices and printers" display nothing.

  Just added a scanner, no problem, but once again not displayed.

  Now add bluetooth devices does not work. My sony bluetooth mouse, I installed before the problem and it still works

  http://eSupport.Sony.com/

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  And make sure that Windows is up-to-date with the latest Service Pack.

  See you soon.

  Mick Murphy - Microsoft partner

• BIOS / master password (serial number) for sony VGN-SZ433N

  BIOS / master password (serial number) for sony VGN-SZ433N

  Hello

  the BIOS password are you referring?
  your computer is locked?

• Device base system driver code (28)... I use a sony vgn z555dn laptop after I've upgraded to windows 7 this is the error that I can't fix all the others, I managed to solve... Please help

  Remember - this is a public forum so never post private information such as numbers of mail or telephone

  Device base system driver code (28)... I use a sony vgn z555dn laptop after I've upgraded to windows 7 this is the error that I can't fix all the others, I managed to solve... Please help

  Hello

  You updated the BIOS and motherboard (chipset drivers)? All device drivers? By checking
  manually on the link above?

  If so you need to contact the Sony Support as the error is in the provided OEM drivers and not
  Windows 7.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Computer laptop Sony VGN-FZ35G built in camera doesn't work after upgrade to Windows 7

  I bought the laptop Sony VGN-FZ35G Arab Emirates UNITED in 2007 or 2008. It originally came with Windows Vista. Later I've updated with Widows Vista Ultimate and had the driver installed for its construction in camera. It was working fine. Recently, I upgraded my computer with Windows 7 Professional and built in camera stops working. The info on screen is 'the driver is used by another program. I can't trace what program uses it?

  Perhaps your Vaio is not totally compatible win7, did you visit Sony support and update the camera application?

• Sony VGN-CR22G cam sex does not work after installing Windows 7

  Hello

  Please help me with my problem. I just installed Windows 7 on my laptop Sony Vaio VGN-CR22G. After that I can't use my webcam when you use Skype or other video chat.

  When I check the possible solution and suggestion of the internet, it says I have to install the driver software which can be downloaded from the website of Sony laptop. but I can't find the driver for my model. Please help me

  There is no Windows 7 drivers for your model. Laptop came with vista, usually the vista drivers should work. On the download page, select Windows vista for your operating system then "original drivers" will be available on the "filter files by type:" field.

• Sony VGN - NR160E Ultimate laptop. w / Windows 7 Ultimate, failed to load because the c:\windows\system32\drivers\elxstor.sys of the 5.2.10.211 file is corrupted or missing

  I have a laptop VGN-NR160E Sony with an Intel Core 2 Duo T5250 / 1.5 GHz with Vista OEM. It has been upgraded to Windows 7 Ultimate. The former owner has not only any disk, therefore, or I'm doing. I have after I tried to update and got an error this system failed to load because the c:\windows\system32\drivers\elxstor.sys of 5.2.10.211, the file is damaged or missing, I tried all the computer in repair and drives the ISO of Windows 7 options, I need help by someone much more intelligent and savvy than me in computer science.

  You have a pirated copy of Windows 7 Ultimate on your system. You must install a genuine copy.

• Graphics drivers on Sony VGN-SZ483N works is not in Windows 7

  I just upgraded my Sony Vaio VGN-SZ483N of Windows XP to Windows 7.  Windows 7 is set as the default graphics driver a standard VGA driver.  How can I get my work GM950 Intel and Nvidia GeForce Go 7400 under Windows 7.  Sony support site is without help

  Use the nVidia www.laptopvideo2go.comdrivers.

• Sony vgn-fz21s driver problem

  Hi, can someone help I have updated my laptop sony vaio vgn-fz21s Windows 7 now I can't find my motion eye driver & I can not connect my laptop to my tv, I updated to vista

  Unfortunately, that the model of your laptop is not supported in Windows 7 by Sony.

  However, according to their website, you can try to install the drivers for Vista on Windows 7 and it might work.

  You can find more information at the following site: http://support.vaio.sony.eu/computing/vaio/downloads/updates/index.aspx?m=VGN-FZ21S&l=en_GB

• What is the latest version of the bios version for my sony vgn-nr498d (PCG - 7133L)?

  Windows 7 vgn-nr498d (PCG - 7133L)

  Hello Mario,

  Thanks for the post.

  Updated BIOS for the model # VGN - NR498D is not available at the time. You can check all the available drivers and updates here:

  http://eSupport.Sony.com/ca/p/model-home.pl?MDL=VGNNR498D&loc=3#/downloadTab

  Please indicate the solution as accepted, if you find this information useful.

  Kind regards

  Tony.