Sony vgn-fz21s driver problem

Similar Questions

• Camcorder Handycam Sony = updated USB driver

  I have

  Hi, I have windows7 and a friend of dcr-dvd653e number sony model handy-cam, the disk that accompanies this pkg included photo and a usb driver, I have download and download on a computer or camera, now I can download only at the camera. I tried to load the disc that came with the camera, but the system said it was not compatible with win7 and there is no Sony USB Driver not found.

  I'd appreciate any help you could give.

  Kind regards

  John Stubbs.

  Sony has written drivers for their products, not Microsoft.

  Check with Sony to your driver problem: http://esupport.sony.com/

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Startup and shut down problems on Sony VGN-AR51SU laptop with Vista Ultimate

  I have a Sony VGN-AR51SU laptop which has Vista Ultimate preloaded when it was purchased. The windows product key is noted on the underside of the computer.

  The computer is configured to close, either by closing the lid or will the icon start then shut down. I don't remember which option I used to shut down the computer.
  However when I press the power button the computer immediately emits three short beeps. The hard disk icon flashes as if it is starting, but the LCD display remains black and never even a blue screen comes. Devices powered by the computer the light upward.
  Eventuallu the hard drive icon will stop blinking.
  When I put the cover towards the bottom of the computer behaves as if it ends and all devices close but the power of the computer remains on, regardless whether I am with the main power or battery.
  Obviously I can not use the starting/closing track that I have a black screen.
  I tried all the options to remove lead AC and battery close and all devices, then re-boot just on AC power or battery or any combination of these options, etc etc etc and nothing makes a little difference.
  I keep my system and software updated and this problem was one of sudden nature IE. OK one day then the problem the next time I turned on the computer.
  Make three short beeps on start uo and the fact that the screen remains black gives a clue as to the problem?

  Hi Taked,

  This seems to be a hardware problem. You must contact Sony support for assistance on the issue.

  Contact Sony technical support

  http://eSupport.Sony.com/us/Perl/select-System.pl?Director=contact&SR=NAV:support:Electronics:contact_support:ESUP

• Device base system driver code (28)... I use a sony vgn z555dn laptop after I've upgraded to windows 7 this is the error that I can't fix all the others, I managed to solve... Please help

  Remember - this is a public forum so never post private information such as numbers of mail or telephone

  Device base system driver code (28)... I use a sony vgn z555dn laptop after I've upgraded to windows 7 this is the error that I can't fix all the others, I managed to solve... Please help

  Hello

  You updated the BIOS and motherboard (chipset drivers)? All device drivers? By checking
  manually on the link above?

  If so you need to contact the Sony Support as the error is in the provided OEM drivers and not
  Windows 7.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Sony VGN-FW31E of eye movement does not work.

  My Sony VGN-FW31E of eye movement does not work, when I use the webcam it always shows video service bluetooth does not work. How can I get help from sony or other means?

  Thank you

  Evelyn

  Hello

  • Did you change your computer?

  Method 1

  I suggest you to follow the links and check out them.

  Check the status of the webcam in Device Manager?

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  Uninstall and reinstall the webcam from the Device Manager.

  You must be logged on as administrator to perform these steps.
  a. open the Manager of devices by clicking the Start button, click Control Panel, click System and security, and then, under system, clicking Device Manager. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. in the list of USB devices or imaging devices locate the webcam and make a right click on it and then click on uninstall.
  c. restart the computer and webcam again, he will be re - install it back automatically.

  Method 2:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you still have problems, that I suggest you contact Sony center and check.

  http://eSupport.Sony.com/Perl/support-contacts.pl

• Sony VGN-AR320E laptop webcam CC4 does not work. error code 10

  Hi all

  I have sony VGN-AR320E laptop. Just reinstal windows vista. Webcam does not work. gives me an error code 10. I tried to reinstal driver, looked online, could not fix. In Device Manager it says "this device cannot start. (Code 10) »

  I appreciated all the help,

  Hello

  Error code 10 is issued when the operating system knows exactly what went wrong. The result of this error is a hardware failure. Sometimes, it might be due to viruses, to which you can scan your system and take off from these infections. But the most likely reason would be some registry errors. You can use the registry scanning software to run a test on the box and they can automatically correct the error.

  More information for sony vgn-ar320e laptop 10 difficulty error code:

  http://supportforsony.iyogi.com/VAIO-CW-series/error-code-8.html

  Hope this helps you.

• Sony VGN - CR220E Webcam does not work after installing windows 7

  I recently installed windows 7 (not updated, clean installation of windows 7 on my Sony VGN-CR220E, and now my webcam does not work.

  Have already tried the tricks I know and searched the web and there are many others having the same problem, and there are number of recommended suggest solutions. Have tried several of them and has not worked for me after 2 days. Can someone who has actually had this problem and managed to fix it, please let me know.

  Thanks in advance...

  install http://esupport.sony.com/US/p/swu-download.pl?mdl=VGNCR220E&upd_id=5051&os_group_id=6

• SONY VGN-NS30E PARAMETERS AVIO

  my daughter sarah jane barry baught, this laptop computer and the reinstall DVD is gone and now we can not reinstall the appropriate settings the llaptop name is sony vgn-ns30e of avio is there anyway you can help please thank you

  Hello

  There are several methods to reinstall Vista.

  See which method is easiest for you

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  There may be a recovery Partition on the hard drive to reinstall Vista to how it was when new.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  It may be, F8, F9, F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  You should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• ADS Instant HDTV PCI has a driver problem. Its used to play through the speakers of HDTV. Now he doesn't.

  I have a Sony VAIO laptop that I have previously connected to a TV high definition using the HDMI cable with success (sound and video broadcast by the TV).

  I use Windows Vista home edition.

  A few months ago, the noise ceased to play through the TV speakers.    I recently used a program of automatic correction of Microsoft and got the following error message: "ADS Instant HDTV PCI has a driver problem.  Can offer you a solution?  Thank you.

  Hello

  See the link below, he talks about the similar issue.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/audio-device-ads-instant-HDTV-PCI-cannot-start/00bb256f-cf91-44A3-8a66-733ad0a4cdfa?LC=1033

• I have a sony vgn nr460 and does not record the disk hard dvd

  I have a sony vgn nr460 and the dvd drive not registered when tried fixit said the driver lack an updated sony driver and device thing Control Manager even said installation driver fail can someone help me

  Hi dexlyndon

  1. What is the complete model of the computer number?
  2. are you referring to the DVD drive as DVD drive?
  3. do you think that no matter what error code indicated in the device properties in Device Manager?
  4. what fixit did you run?

  I suggest you to run the fixit from the following links?

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Sony VGN-AW41ZF "devices and printers" does not display anything, but they work

  devices and printers doesn't ' display anything, although all devices work.

  The reinstallation of the computer (sony VGN-AW41ZF) and add the devices, they have been posted.

  Later, we don't know why, "devices and printers" display nothing.

  Just added a scanner, no problem, but once again not displayed.

  Now add bluetooth devices does not work. My sony bluetooth mouse, I installed before the problem and it still works

  http://eSupport.Sony.com/

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  And make sure that Windows is up-to-date with the latest Service Pack.

  See you soon.

  Mick Murphy - Microsoft partner

• driver problem on teredo tunneling adapter device Microsoft

  The message is that a driver problem has been detected on Microsoft device adapter tunnelling teredo, reinstall the driver. to try to reinstall the driver, I get the message "this device cannot start [code 10]."

  I have Windows 7 home premium, any suggestion would be appreciated.

  You have a "HP"?

  If so, this may be of interest: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Microsoft-Teredo-Tunneling-Adapter-Code-10/td-p/4204314

  Or see this thread for common solutions: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/troubleshooting-sony-vaio-windows-7-computer/177ed59b-028f-432a-b451-7c52e1ce6b6c

  Quote:

  The most common resolution is to update the drivers associated with the device. To do this, follow these steps:

  a. in the device properties dialog box, click the driver tab.

  b. click put to update driver to start the Upgrade Wizard to update the material.

  c. follow the instructions to update the driver.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note: You may be prompted to provide the path of the driver. Windows may have the built-in driver, or the driver files can always be installed since the last time that you have configured the device. If you are prompted for the driver and you don't have it, you can try to download the latest driver on the manufacturer's Web site.

  Discussions:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Microsoft-Teredo-tunneling-adaptor-not-working/085a88bb-16cc-4E30-A4D6-ac987038a648

  Associated content

  • Microsoft Teredo Tunneling adapter does not (the device cannot start)...
  • Microsoft Teredo Tunneling adapter does not
  • Teredo tunnel card no working__
  • Microsoft Teredo Tunneling adapter does not...?
  • Microsoft Teredo Tunneling adapter works does not properly, computer...

• No sound from computer troubleshooting returns the message: "device driver IDT high definition audio CODEC driver problem.

  I can't get any sound from the computer.  Worked, but quit when I tried to watch a UTube video several hours
  After leaving the computer.  While troubleshooting, AutoCorrect could not solve the problem of the message
  has received "device driver IDT high definition audio CODEC driver problem.   I have the Windows 7 operating system.

  Hello Sharon,

  When you say "AutoCorrect" do you mean this:

  http://windows.microsoft.com/en-IN/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1 ?

  If not, or you are looking for a driver try, here's one from Sony. Note that you may need to run in compatibility mode (with the right button on the file (or its icon on the desktop), select Properties, select the compatibility of the top row): http://download.cnet.com/AR5-Drivers-zip/3000-2108_4-180025.html .

  Let me know if one of them fixes the problem for you.

  Kind regards

  BearPup

• Computer laptop Sony VGN-FZ35G built in camera doesn't work after upgrade to Windows 7

  I bought the laptop Sony VGN-FZ35G Arab Emirates UNITED in 2007 or 2008. It originally came with Windows Vista. Later I've updated with Widows Vista Ultimate and had the driver installed for its construction in camera. It was working fine. Recently, I upgraded my computer with Windows 7 Professional and built in camera stops working. The info on screen is 'the driver is used by another program. I can't trace what program uses it?

  Perhaps your Vaio is not totally compatible win7, did you visit Sony support and update the camera application?

• USB - If xHCI USB host controller driver problem

  My new Windows 8 in Sony VAIO found the problem with the USB - IF xHCI USB host controller driver, who couldn't reinstall Windows. What should do? I have not done the recovery discs! Please answer...

  Thank you

  I saw this post today and the information provided helped me to solve this problem.

  Click here

  http://www.eightforums.com/hardware-drivers/17161-Intel-wiusb-driver-not-working-properly.html

  The link essentially says to visit the Intel Web site and use the Intel driver update utility. The utility automatically searches your computer for devices that are eligible for an update. Hope this helps you because it has helped me. Also I have updated my wireless driver while I was using the Intel drivers update utility as a newer driver has recently been made available.

  It worked for me; However, I ended up having to uninstall the old drivers Intel WiDi, then by restarting my computer before the setup.exe file would go and install on my computer (dell inspiron). I created a restore point in case it did not work, but everything seems to work smoothly!

  I must also stress that just remove the driver Intel WiDi also got rid of the yellow exclamation, and unless you plan to try to connect wirelessly to your computer to your TV, I don't think it's something you need. Here is a link that explains what is the driver:

  http://www.Intel.com/content/www/us/en/architecture-and-technology/Intel-wireless-display.html