Sorry, no error messages remembered. Hey I'm old. Crash dump blue screen. Vista Home Premium

Similar Questions

• Operation Failed, error 0 x 00000002 when you try to add printer on Vista Home Premium

  WiFi printer (Kodak ESP 7 all-in-one) works very well for centuries. Had to do a system restore with my HP under Vista Home Premium laptop. Then the printer could not be detected. Removed from the printer. Downloaded latest driver from Kodak. When you try to add the new driver/printer, it gives me an error 0 x 00000002. Also just tried to add the printer in the printer browser window and does not see on the wi - fi network, even though I know that it is connected.  Kodak assures me that it's an OS problem. I know that the print spooler and dependencies are running. Have tried various solutions several times between reboots.

  Hello

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the other links here

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• error 0x000000c1 with a canon lbp 6300dn printer and Vista Home Premium

  I have a Vista Home Premium that I try to install a canon lbp 6300dn printer on a network.  It gives me the error 0x000000c1. I got the correct driver of canon but continue to get this error? can you help me?

  It is an unrecoverable Windows, usually called error message Stop, bug verification, or more commonly the blue screen of death (BSoD).  Not a Setup error.

  You can try to install over the previous installation.

  If you can get the system for more than a few minutes or you can use safe mode, try to delete the last installed application software or driver.
   
  For the withdrawal of an application:
  1. click on start, Panel, then programs and features.
  2 Select the software associated with the printer, and select uninstall.
   
  To uninstall the driver:
  1. go into the Device Manager
  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  2. find the printer driver, do a right click Uninstall.
  3. also in the Control Panel, printers, right-click on the printer and click on delete.

  Now try to install your printer with the latest drivers available on the Support site of the manufacturer.
  http://www.USA.Canon.com/Cusa/support

  Your Type of product: consumer Home & Office
  Family of products: Printers & Multifunction
  Series of products: image CLASS series

  See also these:
  Bug Check 0xC1: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff560183 (v = vs. 85) .aspx

  SPECIAL_POOL_DETECTED_MEMORY...
  STOP: 0X000000C1
  http://www.faultwire.com/solutions-fatal_error/SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION-0x000000C1-* 1194.html? = date order

• Commercial error Code 0x8007045D Vista Home Premium Version complete

  Good afternoon... I been up all night trying to find answers to fundamentally
  error codes 2 I receive when you try to install Windows Vista Home Premium full retail
  version, 64-bit and 32-bit. 0x8007045D error code and error Code 0 x 80070003, the first
  0x8007045D code receives most often, and during the phase of installing 'multiply '.
  Files... he expanded on anywhere from 00 to about 50%, taking as long as 45 minutes.
  When the error 0x8007045D code appears. The other code came during other phases of the
  installation, but less often.
  Now, there was a lot of "answers" on the forums online to the same question as above, plus all the
  of them I've read has dealt with Vista and, like me, do a clean-install not one upgrade. Answers
  varied bad hard drive and dvd drive not working not not for RAM (one person said a few years back to)
  not 4 GB of memory, but less than 2). Others have said that the write speed of the
  DVD player was set down too quickly, that... but mine is a full commercial version.  And I have
  Microsoft contacted by chat and phone and the product key is valid.
  Remember, this is for Windows Vista Home Premium not Windows 7 Home Premium.
  I went back to Windows 7 HP, if I can do some research on these error codes. In a few weeks
  I have a new pc built for my Windows 7, but this 'old' pc that I use now is what HP Vista
  will be used, if I can ever get it installed. The SPECIFICATIONS below are for this desktop computer
  PC that I'm tempted to get Vista installed on HP. I'll Tinker (change) with parts
  (hard drive, RAM and DVD drive), but none are too drastic.
  Any help will be greatly appreciated.

  Thank you!!

  Jimmy

  TECHNICAL DATA:
  AMD Phenom II x 4 955 3.20 GHz; Motherboard Gigabyte GA-M68MT-S2P. Hard drive Samsung HD501LJ
  500 gb/7200 RPM/min/16 MB cache/SATA; LiteON DVD Writer SATA internal; 4GBs (2x2gb) DDR3
  Micron 1333 mhz RAM; Radeon HD 5450 x 16 1 GB DDR3 PCIe

  A managed after removing my PCIe x 16 graphics card, used my graphics card built-in, also removed unnecessary devices (printer sound, internet,) before a successful... not a problem at all... almost as easy as Windows 7 :).. also changed the hard drive and no dvd drive before installation... no problem at all. A marked a 5.9 on all 5 of my Windows experience Index Thank YOU Notes!

  Jimmy.

• My computer has an operating system of windows vista Home premium 64-bit. When I try to get updates, there is a message error code: 8000-ffff. How to solve this problem?

  My computer has Windows Vista Home Premium 64 - bit operating system.  When I try to get updates, there is an Error Message Code 8000 ffff.  How fix/resolve this problem?

  Error when you download updates using Windows Update or Microsoft Update: 8000FFFF
  http://support.Microsoft.com/kb/946414

  How to reset the Windows Update components?
  [Launch the difficulty mode by default and aggressive , if necessary]
  http://support.Microsoft.com/kb/971058
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Help with error message: "Windows Vista Home Premium product key you typed in is invalid for activation.

  Original title: help with error message... Please...!

  I use a desktop PC of HP Pavilion a6202.uk with Windows Vista Home Premium & Microsoft Office 2003.  When I am back from vacation & turned on my PC, my password was OK, but rather to raise Windows, I received the following message: "Windows Vista Home Premium product key you typed in is invalid for activation.  He then listed the following options: "access your computer with reduced functionality (this will allow you to buy a product online key)" or "Type a different product key" or "contact HP to help solve this problem."

  I have no idea what a product key is and don't have anything either in the type comes to connect as usual.  I can't access anything to be same to reduced functionality.  I can not type in a new product key because I did not.  I can not contact HP - phone number does not... !!

  I'm quite desperate, I travel docs to print and e-mail to answer and I don't have any idea what is happening.  Please can someone help with this not very IT clued-up DTP...!

  Moved from Vista programs Forum.

  You should have a sticker with the product key on your computer, on the bottom, or under the battery cover.  I try to type this key in and see if it accepts it.  If this isn't the case, you might not have an authentic version of Windows installed.

• I have Vista Home premium and you want to install Windows Defender, but however get the 08x800106ba error message.

  I have Vista Home Premium sp2 and you want to install Windows Defender, but however Gets the 08x800106ba error message.

  Where should I go from here

  Hello

  You cannot install Defender in Vista; It is already part of the Vista operating system.

  Read about Defender:

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Cannot access the calendar from Windows Vista Home Premium all of a sudden... get error message indicating it is disabled... Help, please!

  After 1 year with the help of Windows Calendar on Vista Home Premium, I'm suddenly not able to use it (impossible to add new appointments and stored all appointments have mysteriously disappeared). I get a message saying "You cannot add appointments to a calendar that is disabled" the details of State "access denied." ... How is - it happened 'out of nowhere '? How to activate it? It's very frustrating... I searched the forums and Microsoft google the question. I found some results suggesting to either change the registry or download the fix automatically and manually merge in my registry. I tried both with no result. I have event tried to remove the old calendar and create a new one... still nothing. Any suggestions? Help, please!

  Hello NYintelligentinvestor,

  Thank you for using the Microsoft Windows Vista Forums.

  Sorry, you have a problem with that.  What type of entry you are trying to add?

  Look at the calendar and on the left side, to half way down you will see a small block that will have something like "NYintelligentivnestor schedule" - there is a small block to the left of this one. To activate the calendar, click on the box to place a check mark in it.

  If there are calendar shown in this block, then go to "file" on the main toolbar and click on "new calendar" - one should then appears in a block with a check mark in the box on the left.

  I hope this helps. Please let us know status.  Thank you! Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• ERROR APC on Vista Home Premium

  I m having Dell Inspiron 518 PC Vista Home Premium spirit. Since the last weeks of towing I m facing the Blue error screen. Please help me. I had recently installed Win 7 on my pc along wit Vista. But then uninstalled it concluding tat there some graphic problems...

  ___________________________________________________________________________________________________
  Details in the following way:

  DATE: 18-12-2009
  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 16393

  More information about the problem:
  BCCode: c5
  BCP1: 00FD594C
  BCP2: 00000002
  BCP3: 00000001
  BCP4: 82B2F067
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  P:\Windows\Minidump\121809-22230-01.dmp
  P:\Users\Pratik Naik\AppData\Local\Temp\WER-26925-0.sysdata.xml

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  P:\Windows\system32\en-US\erofflps.txt

  _______________________________________________________________________________________________
  DATE: 20-12-2009
  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 16393

  More information about the problem:
  BCCode: 19
  BCP1: 00000003
  BCP2: 82B3BA20
  BCP3: 82B3BA20
  BCP4: 04B3BA20
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  P:\Windows\Minidump\122009-16676-01.dmp
  P:\Users\Pratik Naik\AppData\Local\Temp\WER-28610-0.sysdata.xml

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  P:\Windows\system32\en-US\erofflps.txt

  DETAILS OF MY PC:
  Dell inspiron 518
  Core2Duo E8300 @ 2.83 GHz, 6 MB cache
  3.00 GB RAM

  Hey Pratik,

  Welcome to the Microsoft Answers site!

  A. have you installed windows 7 on a different partition?

  B. you try to start windows Vista?

  C. any error message when you get the blue screen?

  D. when exactly do you get the blue screen?

  Try and let us know the answer.

  Kind regards
  Bindu S Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot restore backup successful - 0x8007007A Vista Home Premium error code

  I use Vista Home Premium that came with my laptop. I had a nightmare with my Dell Inspiron for the last two months. I finally gave up and decided to do a clean install, after completing a successful using the Vista Backup Backup Assistant. Now, here's the problem. I reinstalled Vista, and made sure I had all the Windows updates available. Now I want to restore my data from my removable hard drive files.

  I click on the Control Panel, system and maintenance, restore the backup files, Advanced Restore and select my removable hard drive (which is cool). Then, I get the following error message:

  "There was an unexpected error. The data area passed to a system call is too small. (0x8007007A).

  I tried to copy the backup file on my computer and going through the same process, but I get the same result.

  I'm at my wits end with this, I can see all the files on my portable hard drive so I know something is there, it's just Vista backup restore will not do its job.

  Help, please!

  First, disable any security software you have running on your system.

  Then connect the external drive and go to start / Control Panel / Adminiistrative tools / computer Managmernet / Disk Managment and change the drive the drive letter of bacckup (I don't know why, but I saw an answer where this atually worked so it's worth a try).

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.  More than finding the cause, I want to eliminate anything that might interfere with the process.  Try the restore in clean mode to see if the tht works.  Don't forget to return the system to normal when done regardless of the result.

  There is not much on this error code and absolutely nothing of a value - only valid suggestion posted above.

  Here is some general information that can help (although unrelated to this particular error)) but it may be useful to solve the problem as a whole.

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.  It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup ("Yes... even if he said that the backup location is not available ' )

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).  I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista Home Premium fails to install with error Code 0x800705B3 Requires_Interactive_Window_Station Service Pack 2

  I'm trying to help a friend install sp2 to vista Home premium. I tried all the tips I can find nothing on this forum (and google) does not. However, I can't find any post (or article) installation involving a failure of sp2 with 0x800705B3 error code. All messages (or objects) I found with THIS focus with the installation of the hardware drivers after the sp2 update. Can someone help me with this?

  Free unlimited installation and compatibility support is available for issues related to Windows Vista Service Packs. Availability of support chat or messaging differs depending on your location. Some questions may require more support for which it has advanced a charge: http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code 8024200d when installing SP2 for Vista Home Premium (32 bit)

  I use Vista Home Premium (32 bit).  When Windows Update recently
  tried to install SP2 (several times), the quoted error message
  repeatedly prevented installation.  Google showed a number of similar
  references to the problems associated with SP1 (from one year or if there are and less).  Is
  There is a work around for this message because it applies to SP2?

  Biggar Gordon
  Houston, Texas

  Hi Colonel biggs,

  Welcome to the Forums Microsoft Vista

  This problem may occur if one of the following conditions is true:

  · A program on your computer interfered with the installation of the service pack.

  · There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

  To resolve this problem, try each resolution in the 'General resolution"and the"Advanced Troubleshooting"section in the order in which they are presented. After trying a resolution, try to install the service pack again. If you can't always install the service pack, try the next resolution.

  Resolution 1: Install the stand-alone package for the service pack instead of using Windows Update to install the Service Pack

  Note If you have already tried to install the stand-alone package for the service pack and you have encountered this problem, skip this resolution and go to resolution 2.

  If you don't know if you've tried to install the stand-alone package for the service pack, it is recommended that you try the following steps to install the stand-alone package for the service pack. By using the stand-alone package to install the service pack, you eliminate installation issues that may be related to Windows Update. This simplifies the troubleshooting process

  Solution 2: Run the system update readiness tool

  System Update tool checks your computer and trying to resolve certain conditions that can interfere with the installation of the updates or other software. However, before you download the tool, you must determine whether your computer is running a 32-bit version or a 64 bit version of the Windows Vista operating system. If your computer is Windows Vista installed, and you know which version you are using, go to the section "how to download the system update readiness tool. If you are unsure which version your computer has installed, follow these steps:

  1. click on Start

  2. collapse this includes it in the Search box, type System, and then click System in the programs list.

  The operating system is displayed as follows:

  · For a 32 - bit version operating system, 32-bit operating system appears for the system type under System.

  · For a 64 - bit version operating system, 64-bit operating system appears for the system type under System.

  After you determine which version of Windows Vista, your computer is running, download system update readiness tool.

  Resolution 3: Close or disable any applications that may be running, restart the computer and then install the service pack

  1. Close all applications and restart your computer.
  2. Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps:
  1. 1. Right-click the icon of the third-party program.
     2. Click Close, disable, outputor an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.
  2. As soon as you close the antivirus or the antispyware software, try to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site:

  http://www.Microsoft.com/downloads (http://www.microsoft.com/downloads)

  1. After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.

  For more information follow the link below:

  http://support.Microsoft.com/kb/947366

  Hope this information is useful.

  Suresh G
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Mail Server errors 0x800ccc67, 0x800ccc90 & 0x800ccc19 running Windows Vista Home Premium Edition, Windows Mail v.6.0.6000.16386 and Avast v 7.0.1466 the two sending & receiving

  Hello and thank you for taking the time to review my problems and for any help you can offer.

  I am running Vista Home Premium, Windows Mail 6.0.6000.16386 and free AVAST version 7.0.1466 program v.  When searching for error codes that I receive, I can see this is perhaps a problem with the anti-virus software, but no one says how to solve problems.

  First error: your (or SMTP/POP3) server has not responded in 90 seconds.  You want to wait 90 seconds for the server to respond?   It doesn't matter if I have a bit of waiting time or even increase the time-out threshold.

  Error number: 0x800ccc19, 0x800ccc67 & 0x800ccc90

  Limit of simultaneous connections in outdated Avast.  (Col: 0, process;) WinMail.exe [50]); port 25, Server (SSL): no, Server error 421

  I posted this same message on the Forums of Avast at: http://forum.avast.com/index.php?topic=104561.0, but have not received the answers.  Any help would be greatly appreciated.  Do not hesitate to contact me if you have any questions.  Thank you in advance for any help that you may be able to provide.

  Thank you
  M8TriX

  Glad to hear it's fixed. This is probably the feature analysis of Avast and most of the other AV e-mail programs. Keep the following in mind that if this happens again.

  It is safe to turn off the analysis of e-mail messages. See:

  Why you don't need your anti-virus to scan your email:
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Disable the email option in your antivirus scanning software:
  http://www.oehelp.com/OETips.aspx#3

  And it is from Symantec, but applies to all anti-virus programs.

  From:
  http://snipurl.com/bmf6

  My computer is always protected against viruses if I disable e-mail analysis?

  Disable e-mail analysis won't let you without protection against viruses that are distributed as attachments to email. Norton AntiVirus Auto-Protect scans incoming files as they are saved on your hard drive, email and attachments to emails. Scan to email is just another layer on top of that. To make sure that Auto-Protect provides maximum protection, keep active Auto-Protect and run LiveUpdate regularly to ensure that you have the most recent virus definitions.

• Installation installation of Win Vista Home premium error Windows errors can not reset the deployment engine. to install windows, restart the installation.

  Original title: Error Installing Win Vista Home premium.

  I have a PC with Windows Vista Home Premium.  Suddenly, it wouldn't start.  I changed the boot CD ROM and put my Vista disc in and tried to do a "repair" that it came with missing engine or something like this.  After several attempts, I gave up and formatted hard drive losing all my data and programs (rather difficult to backup files when the computer does not start).  So, I tried a complete installation.  I put in the license code and he started the installation.  After a few minutes, the message came;  "Windows Setup could not reset the deployment engine.  to install windows, restart the installation.  I tried several times including completely turn off the computer for several minutes and try again.  I tried several times.  I thought oh well, I will install my Windows 7 program (this and never used).  Error on this installation was: your CPU is only good for 32 bit and Win 7 I have is a 64-bit version.  I'D RATHER INSTALL VISTA BUT need help on the error regarding the deployment engine.  Thank you, Lloyd

  Hello

  See if this solution works for you:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Windows-Setup-could-not-reinitialize-the/f9e6f3e6-EA80-487F-8d86-36c793f7c152

  See you soon.

• 8007371c with windows update error code. Vista Home Premium 32-bit system.

  I have Vista Home Premium 32 bit system and I have problems with windows update since early April.

  The system attempts to update 2807986 KB, 2809289, 2808735, 2820917, 2813345, 890830 (eventually successful), 2817183, 2813170 and 2823324. These will not update after many trials and the system will display an error message saying that some changes could not be completed, returning from changes, will try again on start up, do not turn off.

  On reboot, it gives the message that the updates are not configured correctly, returning changes, do not turn off. I get the 8007371c error code in the popup window windows update but can't find specific information on this code. Help please!

  Thank you.

  Fact: Applications, (Norton and McAfee) are known for do not uninstall or upgrade properly.

  Ideally, should have uninstalled the Norton application AND THEN run (b) the removal of Norton & rebooted tool FRONT (c) you have installed AVG Free and you would have BEFORE your Norton subscription had expired!

  Roll up your sleeves & cross your fingers.

  ACTIONS

  [You may want to print these instructions for reference offline. IMPORTANT => NO SKIP & perform all the steps in a 1 uninterrupted session! [If a step said to restart, restart!]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in #1 above and select run as administrator to run the utility. Do not TOUCH the computer until the race is over, and then restart.

  4. right-click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  Note: Good for IE9 & IE7, too.

  4B. right click on the file downloaded in # 4 above has (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop named ie8-rereg.

  4 c. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 4 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

  5 reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]

  6. right-click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [3]

  6. double-click on the file that you saved in # 6 above & accept invites him to MERGE with the registry data.

  7 restart again.

  8. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  9. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  9 b. IMPORTANT!-online make disappear/close the pop-up window that offers the Windows Update troubleshooting tool! -then...

  9. ignorant of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [4]

  10 restart once again and then run a manual check of updates & see if you manage to install all updates offered security (e.g., KB2829530, KB2847204, KB2830290 & KB2829361); Follow all the instructions.

  11. in response to this post with a status report.

  Good luck!

  =========================================================
  [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

  [2] after that we ended up this thread, feel free to one of your other browsers reaffirm as a default if you wish.

  [3] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

  [4] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.