Sound recording 1DC - via the misfortunes of line

Similar Questions

• How to install the previous version of sound recorder for windows - the windows sound recorder 7 isn't good

  How to install the previous version of sound recorder for windows - the windows sound recorder 7 isn't good

  Hi Harold,.

  Which is exactly the problem that you are facing with the sound recorder in Windows 7?

  You will not be able to downgrade the version of sound recorder for Windows in Windows 7.

  To learn more about sound recorder in Windows 7, see this link:

  http://Windows.Microsoft.com/en-in/Windows7/record-audio-with-sound-recorder

  To fix the fundamental problems with the tape recorder for Windows 7, see:

  http://Windows.Microsoft.com/en-in/Windows7/open-the-recording-audio-Troubleshooter

  Let us know if it helps.

  Thank you.

• You can save the music from itunes with the sound recorder?

  You can save the music from itunes with the sound recorder?

  The principle is simple in nature, although the tape recorder is not the best option available for you, even in free software for audio recording you can.

  If you want to use sound recorder, you will need to get a 1/8 inch male-male stero (cable basically a helmet with two male ends) and put one of your speakers into your microphone in the port (line in).

  Then open sound recorder and give it a shot. The recorded files will be in .wav format, so you need to get a freeware to convert to program them to .mp3 if necessary. Or use this:

  http://www.media-convert.com/

  You can also use Windows Media Encoder 9, which in my opinion is much better in features and maintaining the quality. It is freely accessible to the public.

  http://www.Microsoft.com/downloads/details.aspx?FamilyID=5691ba02-e496-465a-bba9-b2f1182cdf24&displaylang=en

  You use the same configuration that with tape recorder, get a stereo cable and speaker output connection > microphone.

• How can I record audio programs that run through Windows 7 on the sound recorder? Where is the master volume.

  How to record audio programs in windows 7? -in previous versions of windows, I could use the main volume control to select "wave" and that way save audio playing on other programs playing through windows and using windows as a simple sampling devicem - I have a relatek 11 hd audio device/card's directx - in audio devices ControlPanel / / / / material/sound/manage / I see only selection of recording for the microphone or line - how can - record sound through windows 7 - can I buy a cable and put it in the headphone and microphone - I'm trying to address the problem in a way that is now not in windows - I want to play things and recording in a small way - could you provide an answer on how audio intgrates of hardware and software with windows - I can't believe really wanting I could do on the previous windows versions - please help

  Start - All Programs - Accessories - Sound Recorder will launch the utility. You can easily find it by running aid and entering "sound recording."

  Right click the speaker icon in the system tray, select recording devices and set the desired default entry.

• How to get Windows 7 Sound Recorder to record audio from the computer?

  I team with my boss and another customer meetings and we want their registered and we use phone calls from Gmail which means that audio is delivered directly through the internet, and Sound Recorder, I found out but I can't record audio only regular computer unless I Plug one wire in the headphone jack that goes to the mic socket who made the impossible phone call since taking mic is already taken.

  I saw in Windows help can I change the source to be recorded, but it lists only microphones (one built into my laptop is default).

  Is there a way to change the entry from the audio recording of the computer?

  My alternative is to find a cable between the MIC and the sound output in order to hear, speak and record at the same time, which I have never seen elsewhere.

  I also do this all the time.  All what I have to do to set up the computer for that is: -.

  Control Panel, [view by - small icons, if necessary], Sound, recording tab, set Rec. reading * as default device

  [* the name of your topic in the recording tab may be different - you just choose the entry that is not a micro device]

  Sound recorder will then record sounds coming through the computer.

  - - - - - - - - - - - - - - - - - - - - - - -

  If I ever want to record from the microphone, I need to reverse the above setting by:

  Control Panel, [view by - small icons, if necessary], Sound, recording tab, set the internal mic as default device

  Sound recorder will then record sounds coming through the microphone.

• Can satellite L300 - I use the microphone as line-in port?

  On Toshiba Satellite L300 PSLBGE, there are too many plugs: microphone and headphones.

  I would like to copy and transform in digital music from my old analog tapes thorugh an audio cable and a former recorder. Before, I use a desktop PC, which was a line-in Jack (I use Sound Recorder). But the laptop has only two Sockets mentioned. Can I use taken mic as line - in one? At the present time, I installed Windows XP.

  Thanks for any suggestions.

  Hello

  Did you check your user manual? I doubt that this is because there, I created the following information:
  Standard 3.5 mm mini jack microphone allows the connection of a microphone or any other device for * audio *.

  This means that you can also connect other devices to input for audio recording. ;)

• Sound card - sound recording

  I am trying to understand the concept of this. I have a "sound card" installed on the computer.  I know that I need a microphone. Next. I need to install a "pilot"?  Other than the recording of the sounds of the room with the microphone. and other devices, it allows to communicate vocally with others online?  For example, installation of San Diego Zoo?  Can get you into the details about it / thanks,.

  Debra

  Hi Debra,

  If you can hear the sound during playback of an audio file, then the sound card drivers are installed. You may need to update the driver, if you face any problem playback/record sound on your computer.

  You can see the following link for more information:

  How to connect the Microphone to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  Use the sound recorder to test the Microphone

  http://Windows.Microsoft.com/en-us/Windows-Vista/record-sound

  You can also visit the following links and check:

  http://Windows.Microsoft.com/en-us/Windows-Vista/cut-your-long-distance-calling-costs-by-using-Windows-Live-Messenger

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-a-phone-call-over-the-Internet-VoIP

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Studio 1535 of internal sound recording is not possible

  Hello

  The internal sound recording, played by the sound card does not work on my Studio 1535 laptop.

  When I opened the window for recording devices (see photo below, in German, sorry) and play sounds, such as LastFM indicator on the side right of the unit does not show any noise detected by this device.

  

  I set the max level:

  

  And the other parameters of the device are as in the following photo:

  

  Any help would be appreciated.

  Greetings from the Germany,

  Bernd

  
  

• the audio via the line-in input on a dell inspiron 640 m

  Hello.

  When I play audio on the mic/line jack I can record audio from an external sound source with no problems, but I can't make audible somehow through the laptop speakers (or via the headphone/line-out Jack connected to an external amplifier with speakers). Is it possible to switch to reading the entry to the Jack line-in, as if connect you an external mp3 player to the computer to play through the laptop speakers?

  Regards and thanks in advance for any comments, Niek

  
  

• How to turn off the sound recording on a Camileo H20?

  I just got a new VCR Camileo H20. Directly from the box.

  I use it for video road races to complement the photographs that I take with my Nikon digital camera.

  I am really satisfied with the short video clips that I record, whether they are clear and sharp (fingers crossed). They are very well received by the riders.

  * http://www.youtube.com/watch?v=_bNCKCKafCw *.

  The only problem I have is that I would like to turn the microphone off. Supporters cry comments that are usually fairly light, but recently one or two went over the top with comments derogatory offence.

  I know I can turn off the sound in the video editing software that I use, but as I said, I would like to turn the microphone off.

  I do not understand why, when I put the * sound * to * Off * in the Menu it still records the sound.

  Any help on this would be really appreciated.

  Thank you.

  > I do not understand why, when I put the sound on Off the menu it still sound recordings.

  I m H20 not owner but I have a Camielo: 30. But the two are very similar, the sound-> off the coast of the option that you can find in the menu does not sound recording via microphone, but the sound that appears by pressing the buttons by navigating through the menu.

  If you can not turn off the sound while you record a video.

• set the default recording time in windows sound recorder

  Looking for a way to increase the default value to the recording of the sounds found in XP home recorder.  There is no documentation that I can find to the configuration

  Hello

  In the default recorder recording time is 60 seconds. There is a solution to increase the maximum recording time. Follow the steps mentioned below:

  Step 1:
  a. utility start Sound recorder.
  b. click on save and then Sound Recorder run for 60 seconds.
  c. once the sound recorder to stop recording, click Save as on the file menu, and name the file Blank.wav.
  d. in order to increase the maximum duration of recording in sound recorder, click Insert a file in the Edit menu, and then insert the Blank.wav file saved in step 3. When you do this,
  the maximum recording time is increased by 60 seconds. You can repeat this step once for each additional minute recording that you want to add. For example, for 5 minutes
  recording time, insert the Blank.wav file five times.

  Step 2:
  To make the tape recorder automatically use the extended length of the recording time:
  a. Click Start and then click Open.
  b. double-click the programs folder.
  c. double-click the Accessories folder.
  d. double-click the multimedia file or entertainment.
  e. right - click sound recorder and then click Properties.
  f. click on the shortcut tab.
  g. in the target box, press END, press the SPACEBAR and type the location of the file Blank.wav.

  For example, if the target is 'C:\Windows\sndrec32.exe', and the location of the Blank.wav file isC:\Blank.wav, the new line in the target box is "C:\Windows\sndrec32.exe C:\Blank.wav"

  The next time that you start the tape recorder, the Blank.wav file opens automatically. After you save your new .wav file, you can click on remove after the current Position in the Edit menu for
  Remove the extra space in the file.

  NOTE: when you have finished recording and editing of your new .wav file, save the file with a new file name.

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• by using the sound recorder

  How to save files to the sound recorder in the folder of my choice?  I have a folder on my server with a shortcut on my desktop; I would that all records to go to that folder and I guess I can do that via a shortcut.

  Sound recorder Windows 7 will ask you to save destination when you click on 'Stop' registration, then you can select the location of the server.

• The Sound Recorder with W7 now seems much more rudimentary than the old version, and I can't find any way to insert messages into My Documents.

  My O.S. is W.7. 32-bit.

  Before, I recently upgraded to XP and using MS Word 2007, I have a (short) Sound Clip of pre-registration<60 secs. )="" and="" then="" insert="" it="" into="" my="">

  A small icon that looks like a speaker appeared on the Document and that the beneficiary would have left click on it to hear the recording. The Sound Recorder with W7 now seems much more rudimentary than the old version, and I can't find any way to insert messages into My Documents.

  Is this even possible or has Microsoft taken a step backward here?

  I'd appreciate some help here. Thanks in advance. Mech-Tech.

  Original title: Sound Recorder

  If I've understood your problem, try this. Create a shortcut to "soundrecorder /file outputfilename.wav" (without the quotes).

  Then start soundrecorder via this shortcut and start and stop the recording, it will save so (hopefully) as a wav as before.

  I think the problem is, W7 soundrecorder, by default, saves to wma.

  If not, try a 3rd free part program such as Audacity (which seems like overkill, but should do the job).

  I hope this will help.

• HT-TC 260 Sound does not work via the video inputs

  I recently bought a bar of its HT-CT260.  If I plug the cable box bar using the optical connection, then it works fine.  If I plug the optical connection between the TV and my PS3, then it works fine.  But I get no sound, if I plug the bar directly to the optical input on my Sony KDL-40xbr2.

  Oddly enough, the bar works (TV at the bar) if the TV is on channel antanna, but not if I use the video inputs for my box of cable and the PS3.

  Spend 3 hours with Sony (useless) online support and assistance phone sony (well, but not solves is not the problem).

  The optical plug is designed to produce sounds when the content you watch contains audio digital. (PCM or Dolby Digital® technology) This feature is available on a selection of digital and video streaming shows and is not compatible with the standard of cable stations or analogue.

  The KDL-40XBR2 TV can only output sound via the connection perspective If the TV is using its own tuner (i.e. If the TV is connected to an antenna or direct cable line in the wall) which explains why you do not get sound when using the video inputs because cable box and PS3 use external tuners to your TV.

  If my post answered your question, please click "accept as a Solution.
  This will help other users to easily find their answers when you browse the site of the community of Sony.

• Hello, how is it possible to create the FAT32 BOOTCAMP on CoreStorage partition via the command line interface?

  Hello, how is it possible to create the FAT32 BOOTCAMP on CoreStorage partition via the command line interface?

  I mean ' diskutil cs * " and so on..."

  Yes, you must use the resizeStack command. Please see Re: how to repair fsck "your drive could not be partitioned..." Bootcamp does not as an example.