Sound work for system sounds and when I mess with sliding windows mixer
Literally everything is dead silent including steam, ie8 and my games. With the updated audio drivers and all the sounds on highest
Hi Michael,
Thanks for posting your query in Microsoft Community.
Let me ask you;
- Did you change to the computer?
- What is steam? What is an application or a program?
- How you did update the audio drivers?
- What is the brand and model of the computer?
Let's try the methods below and check.
Method 1: You can run the troubleshooter from the below mentioned link and check if it can help solve the problem , Open the Audio playback troubleshooting utility
Method 2: I understand that you tried to update the drivers. However, I try to uninstall and reinstall sound card driver.
a. Click Start, type Device Manager in the start search box and press ENTER.
(b) in the Device Manager dialog box, expand of sound, video and game controllers.
c. find the audio device that was included with the computer.
d. right click on the device, and then click Properties.
e. click driver, and then clickUninstall.
f. make sure the boxremove the driver for this deviceis cleared, and then clickOK.
g. in the Device Manager dialog box, click the Actionmenu, and then clickfind the hardware changes.
You receive a message that States that a hardware device is being installed, and then the not installed audio device appears in Device Manager.
h. close the Device Manager dialog box.
Method 3: Check if the problem persists in the clean boot state
Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
How to perform a clean boot in Windows
Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.
Method 4: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better. I hope this helps.
Measures to check the application event log:
a. click Start.
(b) in the search box type eventvwr.msc , and then on enter.
c. now, click Application in the event viewer (local).
d. now, looking for event log on the right side of the event viewer window.
You can read the following article:
What are the information in event logs? (Event Viewer)
Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
Tags: Windows
Similar Questions
-
I build themes and I want to support all devices. I know that if I build a theme on a device and
Operating system that will work for other devices and operating systems.
Can someone tell me what base unit will be other devices?
example: Bold 9700 will work with the Bold 9650, 9000 "BOLD" and so on (it was just an example and probably inaccurate)
Thank you for your help in advance
Hello
Just a quick note... 9700 themes work with 5.0 screen 480 x 360 OS (89xx, 96xx) dimension and visa versa 96xx and 89xx 5.0 OS themes will work on the 9700
85xx theme OS 5.0 works on 83xx 5.0 OS visa versa 83xx 5.0 OS themes will work on the 85xx with an OS 5.0 but remember the layout of the 83xx series is very different the 85xx, such as dialogs etc... If the theme of predict a 83xx look like funny on the 85xx, which means that the old layout
Storm 1 themes 5.0 OS will work on the Storm 2 and visa versa as it is exported OS 5.0
And it's just like all the other models have screen sizes different etc. such as the Pearl, the torch and the Flip
I hope this has helped!
-
Hello
Last weekend or there abouts I seems to have lost all my sounds and when I passed all the icons were in different places and everything is much broader.
What has gone wrong?
Hello
I did (I think) and it did not work, so it looks like I'll have to call Packard Bell and see what they have to say.
Thanks for your help anyway
Ken
As you have already gone to the website of the manufacturer of the computer and reinstalled the drivers is a good thought to contact Packard Bell about this.
See you soon.
-
original title: %SystemRoot%\media\Windows XP erreur.wav
Hello
When I arrived today at my computer, I noticed that I couldn't hear a sound. So I checked my speakers then I checked to see if she was silent, I then checked to see if my strings have been properly fixed. Everything is as it should be. I went to my sounds in my Panel configuration and then sounds and when he gave me the error "%SystemRoot%\media\Windows XP erreur.wav.Can you help me?
Maria Romero
Hello
1. don't you make changes to the computer until the problem occurred?
I suggest you try the steps from the link below and check if it helps.
No sound in Windows:
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
Hope this information is useful.
-
Hello
I have a desktop computer Windows 7 Home Premium 64-bit with an ASUS M4A87TD EVO motherboard. Recently, I have a problem with my Wired Saitek Eclipse PZ30AU keyboard: when I type, the typical button does not appear on the screen. In other words, the keys are unresponsive. The keyboard is turned on, if the office is enabled/disabled. Even if, at the time, while he was working, the light is always disabled whenever the office is off. I don't know why it is informed, even if the office is off.
My wired mouse usb works fine. I even tried my USB adapter for wireless network in two USB ports, and I still have the signal, so I guess it works very well too. The on-screen keyboard works.However, I tried to connect the keyboard desktop on my laptop and for some reason, what works. I also tried to use a different keyboard on my desk, and it actually works.I downloaded the chipset, the driver M4A87TD EVO BIOS 2001 driver and a driver of NEC Electronics Corporation USB 3.0 controller. But first, I had to install the Akamai NetSession Interface. After that I downloaded all three files, I installed the chipset driver and USB driver in uncompressing them, by clicking on each file, by clicking on Setup. For some reason, the BIO 2001 pilot had only a ROM file, so I just deleted total. After installing and restarting the computer, the keyboard does not.I want to emphasize that, before even manually, download the drivers, I tried using WIndows Update to install all important and recommended updates. After the computer restarts, the guarded keyboard lights flashing on and outside.So, I ask two things:1.) how does my original keyboard does not work on my desktop, but works on my laptop? And my keyboard works for both laptop and desktop?2.) can I keep I have installed the drivers or uninstall them?Thank you.Original title: keyboard problemHello
This problem can occur because of incorrect keyboard layout settings.
Please follow the instructions from the link and check that it works very well.
Check out the link:
Mouse, touchpad and keyboard with Windows problems
For all windows questions do not hesitate to contact us and we will be happy to help you.
-
I have subscription for adobe cc and when I try to get the first he comes up with an unusable version of first cs6 for some reason, I can't change it, please help me
Your system meets the criteria for more recent versions of first?
Premiere Pro - http://helpx.adobe.com/premiere-pro/system-requirements.html
-
Sony Vaio VGN-Z31WN
Windows Vista professional.
Serial number: 28286061
Service etiquette: J003R5FO
IMEI: 355891020417161
I recently had some work to my computer and when I came back, my Adobe suite has been uninstalled.
What steps should I take to re - install / checking the codes etc?
Reinstall from the original with the original serial number disks. There is a good chance it will work. If she says "too many activations", you must contact Adobe.
Please be aware that this is a public forum and all information that you post can be seen by the world. It's often a bad idea to post the serial numbers, because they can be stolen and Rob you of what you paid for. (Less a matter of concern for the machine numbers, but a real problem for the software). There is nothing that we can do your series of Sony or the serial number, only Sony could use it.
-
There seems to be a problem with the software. We use the CS6 for Records services and when we try to save the record, part of the record is stored. Usually the recording to be saved as an mp3 file is 70 to 100 KB but recently only 3 KB are recorded. What should I do to fix this?
You may need to reset your preferences of hearing files stored in C:\Users\"username"\AppData\Roaming\Adobe\Audition\5.0. If you rename this folder in 5.0.bak that hearing won't find it when you open the next time if it will recreate a new settings with the default settings folder. See if hearing then works as expected.
-
It was more of a general question asking management and online community eventually the federal and/or DoD workers who might be unhappy with the current situation of technology of the federal workforce and so therefore could discuss, share and work information to try to improve this situation. Thank you.
edhazelwood wrote:
It was more of a general question asking management and online community eventually the federal and/or DoD workers who might be unhappy with the current situation of technology of the federal workforce and so therefore could discuss, share and work information to try to improve this situation. Thank you.
«I currently work for the NAVY and a nightmare HP NMCI.»
If you are now looking for a Mac NMCI nightmare? Evolution towards a Mac environment will do nothing to improve the NMCI environment.
Why don't do you a Google search or speak to your personal COMPUTING support to discuss your NMCI questions? These forums are to help users of the Apple/Mac product with Apple/Mac product questions.
-
I bought CS3 for mac G4 and when I transferred to my new mac g5, download programs, but I can't use an any of them because that a window opens and says enter serial No. No problem, I have a valid serial number, but when I enter it, a screen comes ups saying that the # is not valid. Can someone help me. [deleted]
[personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not the Adobe support, please do not post personal information]
[Duplicate message deleted... post the same question more than once is confusing... MOD]
[This is an open forum, not a direct line to Adobe support... you have to wait a response]
Error "serial number is not valid for this product". Creative Suite
In addition, if you have El Capitan, click on the following link
See answer #5 in https://forums.adobe.com/thread/1965850 for several solution links
-the first link that the answer is a possible solution to install problems
-
Hi, I downloaded CC on my laptop yet CC serial number doesn't work for my office and says it's a counterfeit disc?
Pippa,
Please see this link for help:
True verification download or installation failure produces creative suite 6
Guinot
-
Hello! I need help! I have the dvd for lightroom 5 and when I put it in my cumputer it dosent see DVD... What can I do?
You can try to download instead of using the drive...
Lightroom - all versions
Windows
http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh
-
How can I transform my ipad app within an app that works for the iPad and iPhone?
I built an ipad with the DPS application. But now my client wants to have the same content on iphone. How can I transform my ipad app within an app that works for the iPad and iPhone? Is this possible without creating a new application App Builder? Thanks for your replies.
You must create a new instance of the DPS App Builder application. Select iPhone and iPad. If you use the same mobileprovision files (or mobile layout updated of the files of the bases on the same ID App), it is considered that a version update of the application itself.
You will need create sheets separated for the iPhone. folios iPad do not appear in the library of iPhone. See Digital Publishing Suite help | Creating content DPS for iPhones.
-
Original title: c\windows\system32\nvcpl.dll
My system crashed and somehow, I was able to find it. c\windows\system32\nvcpl.dll - a library (dll) dynamic link initialization routine failed. Complete reinstallation of my netbook, it worked for 1 day and then resurfaced. Then it happened to my office. I can't get into my netbook to solve it without a complete reinstall, and if it works only for 1 day again then it's a waste of time. Help, please.
Hello'c:\windows\system32\nvcpl.dll' is the NVIDIA Display Properties Extension.I suggest that you follow these steps and check to see if they help.Step 1:Start your computer in safe mode and check if you get the error.Step 2:a. your video card drivers probably needs to be reinstalled. Visit the manufacturer of the laptop computer support Web site to download the correct adapter for your specific model of laptop drivers.b. obtain the latest driver for the chipset and update the BIOS as well.
Warning of the BIOS:
BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.Step 3:Before installing, uninstall the old drivers.a. click on start
b. Control Panel,
c. open the applet, add / remove programs
and look for your video drivers uninstall.Step 4:After you install a new set of drivers.a. right-click on your desktop and select Properties
b. click settings, change the color quality "highest (32 bit), then adjust the resolution of your screen to your liking, then click on apply.»Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Where can I find all my States system restore? When I try to restore windows only displays the States from today until seven days ago.
I'm trying to find the States of up to a year ago.
Hello
system restore points are not here forever
It depends on the amount of space reserved for restoring the system restore points on how you
and as a new one is created the oldest one is deleted
http://www.windowsvistauserguide.com/system_restore.htm
There is a box to check points over 5 days which must obviously have checked back 7 days?
or 7 days a rough estimate on your part?
and here's how to change the amount of space for the restoration of the system increase or decrease to restore more or less points in the future
http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
Maybe you are looking for
-
With the proliferation of wi - fi networks, why not show the active network settings next to the fan of network in the top menu?
-
Firefox poster site too big.
It comes to the screen to login to Merrill Lynch. I launch Firefox in Mode safe mode and did a reset, nothing done. Also I can't submit a 'broken site '. The report starts and just a loop until I cancel it. It works fine in IE 8. I use Firefox 3.6.13
-
What is DRMK V8.00 he keeps trying to download computer tomy hours later it crashes.
in this case start ob, the loading DRMK V8.00 message arrives. It runs a blocking long time then just, so I started to ctrl-alt-delete it then continues startup computer.
-
Mass Effect 2 colors are all wrong
Just download Mass Effect 2 on Steam. Game will load and play, BUT all the colors are false! Just finished Mass Effect on this same computer and he played and looked very well.Have tried all the suggestion of EA nothing works, including making a clea
-
Not a Windows image is valid. Help! At the start of my PC, and whenever I click on any icon I get the error message:The application or DLL C:\Windows\System32\ccfgnt32.dll is not a valid Windows image. Please check the Setup disk.At the start there a