Source as EBS 12

Similar Questions

• 1 source of eBS - 2 planning targets - how to divide the data?

  Hello
  
  I use FDM ERPI to load the data of the eBS in Hyperion Planning (eBS 11.5 and EMP 11.1.2.1).
  
  I have load data in planning of 2 databases (which are in the same application of planning), target adapters so 2 and two locations.
  
  The two locations have the same source and the same mapping.
  
  But some accounts must go to app1, while others must go to app2.
  
  But no information in gl on the target application.
  
  How could I do?
  
  The EPMA table or source file to see what plan enter each account is used?
  
  And when I should exclude accounts: in the import action? in the exportToDat?
  
  Thanks in advance for your halp, hoping it's clear...
  
  Fanny

  Fanny,

  If you will be cutting back, you will need to make separate FDM apps for each target card - it is the only way. FDM creates the drill by definition based on the "installation Code", as some call the default adapter. There cannot be an adapter by default, so to drill at work, it can be a card in the application.

  Until the FDM/Oracle solves this problem, you should not use multiple cards in one drill active FDM app.

  Kind regards
  Robb Salzmann

• Configuration of multiple sources EBS with FDMEE systems

  Hi team,

  Please provide your valuable suggestions in the present.

  We have three systems of source EBS and we need all three to be set to FDMEE to retrieve the GL data. I set up the first system EBS in topology ODI with identification information entered to the physical architecture of EBS_DATA_SERVER. Now for the other system two EBS how should I proceed. Can we have multiple source configured EBS systems both in FDMEE.

  Please help by providing your valuable contributions.

  Kind regards

  Laetitia Rasheed

  It is possible to 11.1.2.3. 530 and higher.

  Take a look at this document, well documented FDMEE: how to save multiple systems from the same Source Type in a single environment. (Doc ID 1997512.1)

  All the best.

  Kind regards

  Deker P.

• Where to find information about all Tables of the Source for Oracle EBS

  Hi all
  
  We strive to implement Oracle EBS R12.1.3 with analytics (OBIEE11g).
  
  Currently, we need to know all the sources (Oracle EBS) Tables for the following modules:
  
  1. supply chain and order management Analytics
  2. purchases & move analytical
  3 finance Analytics
  
  We have searched in Google, could not find any information.
  
  Can anyone share a document link that can provide some information about it?
  
  Thanks in advance
  
  Concerning
  Nathalie

  1. production & order management Analytics
  All the major paintings in inventory (Articles, categories, onhand, operations), order management (headers, lines, clients, types of orders, deliveries), WIP (work, work order requirements, operations orders)
  2. purchases & move analytical
  All the main tables in shopping (po_headers, po_lines, shipments, suppliers, receipts, invoice headers, distributions, the invoice),
  3 finance Analytics
  All the big tables of AP, AR, GL

  Analytics extract data from a large number of tables. (hundreds, if not thousand)
  I'm curious to know what you do with this information.

  Sandeep Gandhi

• Where to put the tables/sources of custom data in ODI

  We have a GR 11, 2 BIAPPS environment where the source is EBS 12.1.3.

  We include some tables custom as source in ODI.

  The tables are not part of EBS 12.1.3 (since a developed custom application), but they are accessible to the user apps EBS. The paintings are found in a scheme called "xxap" in the same database as EBS 12.1.3. The apps user is used to connect to the schema of the EBS in ODI.

  My question is, where in ODI must find these tables to meet standards for customizations?

  Cant' find a reference to this in the documentation.

  Shouldn't we

  1. create a new schema schema/logic Server/physical data and create a data model for that

  2. Add a new submodel to the EBS 12.1.3 datamodel and use the EBS data server/existing schemas.

  3. Add a new physical schema in the source existing EBS dataserver whose schema is set to "xxap" and create a custom for the datamodel folder

  or something else.

  Wan't to ensure that the application of patches/upgrades at a later date will not affect our customization.

  According to this, it's good to put them directly in the EBS model in a folder 'custom objects '.

  http://www.rittmanmead.com/2014/01/customisations-in-bi-apps-11-1-1-7-1-part-2-category-2-changes/

• Unable to set data EBS R12 loading mappings in FDMEE

  Hello

  I try to incorporate EBS R12 and HFM, using FDMEE 11.1.2.3.500. Here are the steps I followed:

  a. set up the EBS_DATA_SERVERS and the PHYSICS of PATTERNS in ODI to point to the EBS Instance using user applications

  b. set Source EBS R12 system and click INITIALIZE. (Validated that initialization is complete without errors)

  c. selected the ENTITIES of ACCOUTING suitable SOURCE for Source R12 system

  Now, when I define a new IMPORT LOCATION, I am unable to see that no matter what EBS the SEGMENTS of the SOURCE under the grid of DATA SUPPORT MAPPING format to import

  Is there something hurts? Also strangely, I'm not even in the SOURCE ACCOUNTING ENTITIES RESPONSIBILITIES when I want to define the Drill Through function

  Thank you

  Mohit

  One of the reasons that you might not see entries in the drop-down segments are filtered by the entries according to the language of the browser or the language settings of the user FDMEE for localization purposes. You might want to try adjust the configuration > user settings > language of the user FDMEE to see if that can do the segments appear.

  We have a system of source English EBS 12 test with and if I change my installation > user settings > user language in FDMEE for something else that the English United States then save and return to the screen of import format, segment menu drop-down boxes are now completely empty. If I change to en - us while they are back once again. I believe that the language accepted by the browser or the user language setting in FDMEE must match the language of 'base' on the source system registration screen.

  With a little luck it might be

• Description of the system Source via FDMEE

  Hello team, for flat files if we have the description in the file, we can take this description also of this. If it is possible to introduce into the Description of another Source System. For Eg, if I have the system source Oracle Ebs, can I bring in the Description for each line to FDMEE. Best regards, laetitia Rasheed

  Hello

  Some formats of import for loads not based on files do not support the Description of the account out of the box.

  An example is Oracle EBS where you cannot add a new dimension in your import format.

  

  The first question would be where your description is stored in EBS? only data from flex fields segments is extracted.

  If you want to set your description information from the segments you could import in any dimension (concatenated segment) and then analyzed in the script of the event to AftImport

  For example, if you import your secondary account description, your import format could be as above and then run a SQL script of the event as:

  UPDATE TDATASEG_T

  DESC1 SET = RIGHT(ACCOUNT,10),

  ACCOUNT = LEFT(ACCOUNT,10)

  WHERE LOADID = float (fdmContext ["LOADID"])

  This is just an example,

  Concerning

• Impossible to create Instance Source in Configuration manager (BI Apps 11.1.1.7.1)

  Hello

  During Setup, I created an instance of source for EBS R12.1.3 but I logged in customer ODI Studio and by mistake I deleted "Data Server" of topology that I created in the Source Instance creation/configuration on Configuration Manager (CM).

  He was not intentionally by mistake I deleted. For this reason, I am not able to change the source instance. Once I try to edit when I save it pop-up error "" error: ODI-10182: uncategorized exception during repository access. ". ORA-00001: unique force (DEV_BIA_ODIREPO. AK_CONNECT) violated. "

  His was bug, but they fix after ODI 11.1.1.6.0

  (Metalink note

  1- Note 1545938.1 : ODI-10182 and ORA-02292 errors reported after the unnecessary suppression of data store in ODI 11 g integration Interface

  2 BUG

  https://support.Oracle.com/epmos/faces/BugDisplay?_afrLoop=96427980024293 & ID = 13916069 & _afrWindowMode = 0 & _adf. CTRL-State = 1536syzwe9_437

  )

  However, I tried following cases:

  1 - tried to modify an Instance of Source of Configuration manager (CM) but gave me an error: ' error: ODI-10182: uncategorized exception for access to the repository. " ORA-00001: unique force (DEV_BIA_ODIREPO. AK_CONNECT) violated. "

  2 - tried to create a new database server by using the same Instance of Source of Source on Configuration manager (CM). Failed with the error message: "invalid system Source.

  3 - has tried to re-create the same name server given in ODI Studio with the same name. Failed due to the error: "Data Server Alread exists."

  Then without success so far. I'm currently editing source system Instance but so far without success.

  Versions:

  OBI Apps: 11.1.1.7.1

  OBIEE: 11.1.1.7.0

  ODI: 11.1.1.7.0

  Database: Oracle 11.2.0.3

  OS: Windows 2008 R2

  concerning

  Sher ullah baig

  I am SR with oracle and they offered under the solution, I hope it helps someone.

  How to remove a system from source?

  The user interface for Configuration Manager does not include a way to remove a source system. In the page set of Business Intelligence Applications, you can only add or change a source system.

  By manually removing the source of Oracle Data Integrator system and tables in the main database, you can effectively remove a source system.

  To manually remove the source system:

  1. connect to the base of the application through a utility such as SQL * more or SQL Developer, connected to the same user configured in the data source for WebLogic.

  2. find the source of the source system to remove system identification number by running the SQL code following and looking at the value of the DATASOURCE_NUM_ID column:

  SELECT DATASOURCE_NAME, C_DATA_SOURCE DATASOURCE_NUM_ID;

  3. go to ODI Studio and delete the physical schema associated with the source system.

  4. in Studio ODI go to the respective logical schema:

  2.1 go tab flexfield

  2.2 check for data source digital id flexfield to use by default.

  5. in SQL * Plus or SQL Developer run the following statements where the variable binding,: Bind_DatasourceNumId, is set to the value of the identifier of the source system. These SQL statements can also be placed in a script, if necessary for later use.

  DELETE FROM C_DATA_SERVER WHERE DATASOURCE_NUM_ID =: Bind_DatasourceNumId;

  DELETE FROM C_DATA_SOURCE_DISABLEDOFFR_REL WHERE DATASOURCE_NUM_ID =: Bind_DatasourceNumId;

  DELETE FROM C_EXECUTION_PLAN_FACTGROUP_REL WHERE DATASOURCE_NUM_ID =: Bind_DatasourceNumId;

  DELETE FROM C_LOAD_PLAN_GENERATION_STEP WHERE EXECUTION_PLAN_ID IN (SELECT EXECUTION_PLAN_ID FROM C_EXECUTION_PLAN INCLUDING EXECUTION_PLAN_ID NOT IN (SELECT EXECUTION_PLAN_ID FROM C_EXECUTION_PLAN_FACTGROUP_REL));

  DELETE FROM C_EXECUTION_PLAN WHERE EXECUTION_PLAN_ID NOT IN (SELECT EXECUTION_PLAN_ID FROM C_EXECUTION_PLAN_FACTGROUP_REL);

  DELETE FROM C_SRC_DOMAIN_MEMBER_TL WHERE DATASOURCE_NUM_ID =: Bind_DatasourceNumId;

  DELETE FROM C_SRC_DOMAIN_MEMBER WHERE DATASOURCE_NUM_ID =: Bind_DatasourceNumId;

  DELETE FROM C_DOMAIN_MEMBER_MAP WHERE DATASOURCE_NUM_ID =: Bind_DatasourceNumId;

  DELETE FROM C_PARAM_DW_VAL WHERE DATASOURCE_NUM_ID =: Bind_DatasourceNumId;

  DELETE FROM C_PARAM_DW_VAL_AUDIT WHERE DATASOURCE_NUM_ID =: Bind_DatasourceNumId;

  DELETE FROM C_DATA_SOURCE WHERE DATASOURCE_NUM_ID =: Bind_DatasourceNumId;

  COMMIT;

  =========================================

  Concerning

  Sher ullah baig

• How to convert Date months in the database that points to the EBS, DWH not.

  Hi friends,
  
  We intend to create reports in OBIEE and the Source is EBS. This means that we do not want depends on Datawarehouse and Informatica and OBIApps. Simply create us some reports and that they refer to the EBS database.
  
  End of test, we took an HR report and it contains under columns:
  
  Months (Sun)
  Revenue by Division (Fact)
  Average cost per numbers of workforce (Fact)
  
  In my little survey, we found that the income column is of EBS: GL_BALANCES. And we have configured the base of W_Day_D table in DAC has no column months in EBS (not sure).
  
  Come to my problem, how can I call the month column in my data base stressed EBS. How to convert the Date months in my database.
  
  I can deceive me, but someone please look into this... How can I create columns for this exact report of OBI in EBS database instead of DwH.
  
  Thanks in advance...
  
  Raghu Jen7782

  Just confused here.

  Hang on, if I get it, you want to create report based on columns of EBS directly then using rt BI applications?

  There is then no question of using the W_DAY_D table then.

  Follow

  As long as you have Date column, you can use DB functions to convert them into months (just use the string SUBSTR to extract the month and the year).
  Create your own query instead of using the tables of BI APPS and try to bring a hybrid product.

  Sorry I'm wrong in the understanding of your needs, if I had properly then do the steps above.

  Mark correct or useful if this can help,

  Kind regards
  Rayan Vieira

• Query metadata ODI to find the source and the target table for Interface

  Hi Experts,
  
  Customer heading there source of EBS 11.5.10 in R12. They are BIApps ODI. 7952 version. Since then, all mappings there are customized they may not disturb on support of Oracle BIApps is concerned.
  Now, we need to know how many ODI mappings there source EBS is the 11.5.10 in R12 migration and we can only target mappings accordingly.
  
  So, please give me with entries below:
  
  (1) any request for metadata that will give me the information of the source tables table and target them in against an if-same interface that the source of the main interface is another interface.
  (2) what are the other stuffs that I need to look at from the point of view of the mapping changes when the source is upgrading.e.g. only change the source table is enough or I need to focus on other animals. I feel she's boiling down to create a separate source for R12 adapter.
  
  Kind regards
  Snehotosh

  First open the designer-> models and check which model has got the mapping of the eBS. Get this code with this TERRIBLE application

  SELECT count (distinct i_pop) of SNP_POP_COL
  where I_POP_COL in
  (
  Select i_pop_col in the SNP_POP_MAPPING where i_source_tab
  in
  (
  Select i_source_tab in the SNP_SOURCE_TAB where i_table in)
  Select i_table in the SNP_TABLE where I_MOD in
  (select i_mod in the SNP_MODEL where mod_name = "PUT_HERE_YOUR_NAME")
  )
  )
  );

  Will not consider some other influence (i.e. the procedure), it will be an indicator of average first level.

• ERPi initialize the Source system is not extract any chart.

  Hi gurus,
  
  I have a problem while initializing in ERPi Source System. Any help fixing this problem is greatly appreciated.
  
  It is, when I Intialize source system ERPi, its just the kickoff as a single scenario in ODI. And when I navigate to treat in detail to check the status, its still showing as running.
  But I don't see any scenario in ODI in working condition.
  So, obviously, we can guess that it will not to this extreme measure to show the chart of accounts.
  
  So my questions here are:
  
  1. I think there should be several scenarios that should have been expelled from in ODI. But one scenario began?
  2. and how long the Source initialization process.
  
  Version of the software using the (ERPi - 11.1.2.2. v) and ODI (v.11.1.1.3) Source System (EBS v.11i)
  
  Any help is greatly appreciated.
  
  
  
  
  Thank you
  Mike.

  If you use ERPi 11.1.2.2 ODI version should be 11.1.1.6.

  Furthermore, you brought the master and the repository of work that comes with FDM following the Guide from the administrator of the ERPI and making the repository ID 500 and 501?

  If you look in the ODI operator do you see many scenarios under the section of the script?

• instllation EBS R12 on vmware company lunix

  Hey everybody
  
  I need to know how do vm contain linux and install oracle ebs 12 on that R.
  I have oracle linux and source of ebs R 12 and my OS is win 7 ultimate 64-bit my knees is hp probook i5 8 giga of ram and I did a partion 295 gigabytes to install vmware.

  Thank you Vanina but I just need information, I tried to get it from vmware site but I could not it and it's about space required for installation, I did a partion 295 giga and I put the source of the ebs and linux in an another partion I need to know 295 giga will be enough or not and I do partion compressed I ask this question because I spent with my knees to my friend and it is s /. n and it make vm and then stop at the beging of EBS installation and I have at home it takes about 2 hours and collapsed because no more space free in the partion but this time I tried to install it with 245 giga only and source of BSE also in the same partition but I could not see him from windows, so I need to know 295 will suffice or do new partion for her.

  Total space to a standard system (excluding the stage space) is 85 GB for a new facility with a data base of production and 233 GB for a new facility with a demonstration of the Vision database.

  Running a scenic space quick installation requires at least 47 GB host system and file database files in the stage space.

  You need to be close to a total of 150 GB for data charges (including stage area directory) and close to a total of 290 GB of database of demonstration of Vision (including stage area directory).

  Installation of Oracle E-Business Suite Guide: quick installation using - Page 1-10
  http://docs.Oracle.com/CD/B53825_08/current/Acrobat/121oaig.PDF

  Thank you
  Hussein

• Data model of the EBS Guide / technical reference Document.

  Hi all
  
  I'm working on Informatica/OBIEE, and our source is EBS with Module of Finance.
  
  I am looking for a technical reference Guide / guide that gives complete information about the Tables involved in the finance module in data model EBS.
  
  I'm not able to find in the website of Oracle...
  
  http://docs.Oracle.com/CD/B40089_10/current/HTML/docset.html
  
  Can someone guide me / give the link for this document?

  ace_friends22 wrote:
  Hi all

  I'm working on Informatica/OBIEE, and our source is EBS with Module of Finance.

  I am looking for a technical reference Guide / guide that gives complete information about the Tables involved in the finance module in data model EBS.

  I'm not able to find in the website of Oracle...

  http://docs.Oracle.com/CD/B40089_10/current/HTML/docset.html

  Can someone guide me / give the link for this document?

  eTRM Web site: http://etrm.oracle.com

  Thank you
  Hussein

• Source of FDM adapters

  When you go through the road to use an adapter of the FDM Source to provide the file Source GL trial balance as opposed to the generation of a file flat of the GL, is the Source adapter also out a flat file? Or is it a copy of the live table and insert them into the tables of FDM?
  
  To clarify:
  
  When I generate a flat file Balance.txt trial for the GL and I have import on FDM, the file flat itself is transferred to the Inbox and folder name respectable location in the Inbox, as it is then treated through FDM.
  
  If I use the Source adapter to extract information from GL, it also create a flat file and place it in the Inbox? Or is it simply to copy the data to the tdataseg FDM tables and does not produce an audit trail of txt file of what it pulled?
  
  Thank you!

  Depends on your version. ERPI is 11.1.1.3 + source for EBS adapters are 11.1.1.1 by 11.1.1.2. Both create flat files.

• Details FDMEE not get Stat accounts

  Hi people,

  We created two or three Stat entries in the EBS using a paper system and displayed in the EBS. The values for the Stat is already in the GL_BALANCES table. I created a rule in FDMEE to fetch it Stat amounts to FDMEE of this great book where we posted in EBS.

  When creating the rule, we mentioned below the filters.

  

  But we are not able to recover data from the EBS by using the rule that it not showing any available documents. Please advise if I am doing something wrong here.

  Concerning

  Hello

  I suggest that take you a look at this document of support given charges that extract statistical balances are not extract data when it exists in the Source GL EBS system (Doc ID 1535184.1)

  You may need to set measures in EBS.

  Concerning