CPP and print spooler

Similar Questions

• on a printer shared and I get printer spooler properties does not

  When I try to print from my other pc it say memory and Printer Spooler context does not and when I go to control panal printer and try to right click on anything it says the spooler does not and not connected

  You can print from the computer to which the printer is physically connected (assuming that the printer is physically connected to one of your computers)?

  What version of Windows, including the service pack is on the computer to which the printer is physically connected? (Right click on desktop and select Properties, if you do not know).

  What version of Windows, including the service pack is on the computer that is giving you problems?

  How did the computer which gives you problems connected to your local network?

  Can you access any file on the right computer of the bad computer?

  What is the brand and model of the printer?

  The following applies to the computer that is giving you problems:

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  IMPORTANT: If either of the analysis above turns up malicious software (other than tracking cookies), both from the scans will work on all the other computers connected to your local network.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• HP Laserjet M1522 nf - cannot install the driver (print spooler is stopped)

  -installed driver using the installation disc, but when I tried to add the printer to the wireless network, all THE existing definitions of the printer disappeared and print spooler has stopped. I restart the spooler, but when I try to install the driver, the error message says "cannot install printer - Print Spooler App stopped. Please start the spooler or restart the computer. ") Operating system Vista).  I've upgraded to Windows 7, but the problem persists.

  So is the printer connected to the router or you are going through the router to a shared printer on another computer.

  Whatever it is, the printer driver must be executed in the process of printisolationhost rather than the spoolsv process if the spooler will not process that is corrupting the print driver.

  When you have Pro and Ultimate is easy.  If you have home made me know if gpedit.msc launches Group Policy Editor.

  For Pro and home run printmanagement.msc

  Drivers, find the 1522, right click, pilot of isolation, isolated

  Now, start the spooler service.  Since the driver does not work, you must remove it by using any HP software used to install the driver.  Normally in the programs, you can find the installation of HP and select uninstall.  Reset.  HP.com head, pick up the HP driver published last month and start again

  version 4.3

  4.3 March 23, 2010

  220,7

  March 23, 2010
  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• LEXBCE went out of the CPP and the print spooler

  I have a friend who had both a Lexmark printer and later a Dell that uses the Lexmark drivers.  He was trying to install a new printer but found that the print spooler would not start as one of its dependencies was the Lexbce service that obviously has not subscribed when older printers have been uninstalled.  I went through the operating system with the search utility are looking for and removing all the lexbce *. * files.  Six were found and removed.  I also went through the registry to find all references to lexbce and come out as well.  I also went to HKEY_LOCAL_MACHINE\System\ControlSet001, ControlSet002, and CurrentControSet find and remove references to the Lexbce service and remove the framework of dependency for her in the print spooler service keys.  It was the only way I could find a way to extract it from its BONES.  Disabling this service did not communicate the print spooler to be used by another printer.

  As a result now the RpcSs service, one that depends on the spooler starts and no buttons Start, Stop, Reset or disable are available in the properties for this service.  I must have taken out too or I deleted the files from the lexbce service acted instead the normal OS files.

  Is it possible to restore the RpcSs service?  Maybe a repair reinstall?  A direct copy of the files from another XP Pro OS?

  Thanks a lot for everyone help out there.

  I'm sorry that I've seen this post earlier.  It is actually very easy to get rid of addiction that install Lexmark printer (and Dell/Lexmark) create.

  From a command prompt, type the following command

  dependent on the spooler of sc config = RPCSS

  Now that you have mucked the registry, however, you will probably save time and aggravation by performing a repair install (if you can not the RPC service to start, much more that the print spooler will be broken).  See the full list of dependent services RPCSS here: http://www.blackviper.com/wiki/Remote_Procedure_Call_%28RPC%29

• The print spooler stops and I'm unable to start

  I have a HP Officejet Pro L7680 all-in-one that has stopped printing because of the stopped print spooler.  The printer is connected to a local network.  My OS is Windows 7.  I tried Wizard solutions HP that does not help or give answers.  All I get is error 1053 has failed at the beginning or demand for appropriate ion Conytol.  What should I do to start the print spooler?

  To start the spooler go to the start menu and select Control Panel then Tools administration and select Services, and then scroll until you see print spooler. If the spooler is running, then select Restart the service, and then try to print a document.

  Let me know how it goes.

• The Print Spooler Service has stopped. Restart the print spooler and try to print and make the same mistake.

  Recharging according to the printing software and get always the same error.

  Hello

  You must ask in the answers – Windows Forums for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ==================================

  Here is a troubleshooting guide for Windows 7 - Vista would be very similar.

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ==================================

  Follow these steps in the kind of prerequisites:

  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ------------------------------------------------------

  References to Vista also apply to Windows 7.

  Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
  to install - make a right-click on the pilot - run as administrator.

  Also check with the manufacturer of your printer and forums support.

  --------------------------------------

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service (see the following link BlackViper for Windows 7 default dependencies)
  http://wiki.blackviper.com/wiki/Print_Spooler

  BlackViper Windows 7 Service - default settings
  http://www.blackviper.com/Windows_7/servicecfg.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Print spooler problems and cannot install printer driver after Windows 7 upgrade (80070706)

  I just upgraded from Vista to Win 7 Ultimate.  Once installation is complete, I tried to update the drivers and install the latest updates.  Everything worked except for HP LaserJet 4 L driver.  As a first step, whenever the driver tried to install it, the print spooler service may stop working, and the driver installation failed with error code 800F0246.  I then removed everything from the spool directory, rebooted and tried again.  This time, the print spooler service has not prevented from working, but the driver still does not work with error code 80070706.

  I can't find the information for this error (80070706) anywhere on the web.  Any help would be appreciated.

  More information: the HP LaserJet 4 L printer is connected via a parallel to a prolific USB docking cable.  Windows recognizes the printer as the IEEE-1284 device, but says it needs driver to work.

  Update: I was able to manually add the 4L driver using the print server properties dialog box, BUT if I try to add a printer after that, I get "the print processor does not exist.  If I try to add a printer without installing the driver, I get ERROR 0 x 00000002.

  Everything is running as an administrator.  It worked perfectly under Vista.

  Thanks for these links, but these proposals did not help nor solve the problems.

  After a long and painful journey through the registry, I determined that this workstation was already installed 3rd party software, called "Pharos".  Apparently, this software was redirecting the default print processors and was clearly not compatible with Windows 7, although the installation of Win 7 never mentioned a problem of compatibility.  Once this software has been removed, and all the remains erased from the registry, there is now no problems with printers or print spooler.

  In the future, it would be useful that Microsoft has actually provided certain types of useful information when these accidents occur.  Cryptic error numbers and unnecessary event log entries did not provide useful clues.

• Want to 4502eAiO: print SPOOLER STOPPED message. WITH THE HELP OF HP ENVY 4502 AND ACER ICONIA TABLET?

  Have had problem and cannot print. The print spooler if am stopped message. Whenever I look for support with that it seems as if all suggestjons are on Windows or Mac. How do I even stop and restart the print spooler please?

  Hi there Lesyl,

  I see that you cannot print because of an error regarding the print spooler. Have you tried to remove data from the app to the spooler? For that; Settings > Apps > Plugin printing HP Service > clear data.

  Another thing you can try is to start the table in safe mode and see if the print spooler error is always present. How to start your Android phone or tablet in Safe Mode Let me know if you can print in safe mode.

  Don't forget, the laurels is as the version of the Internet to a High Five!

• Print Spooler service is not running and cannot install a new printer

  My print spooler service is not running and the computer will not let me install a new printer. How can I fix it?

  Hi John,.

  What is the number and the model of your printer?

  You can try running the fixit of the printer and check.

  Diagnose and automatically fix problems printing and printer

  You can also consult the following articles and check.

  Printer in Windows problems

  Resources for the resolution of the printer in Windows XP problems

• print spooler is manual and off the re-boot

  After making spooler running in services, and automatic printing is again manual and not started on a re-start, getting permanent plse parameter. Printer - Canon Pixma MP270 under XPpro SP3, cannot update all drivers such as use of canon "material and support who says all drivers are up to date.

  concerning

  Tom

  HI T¤m,

  Follow the methods and check them off below if it can help solve your problem

  Method 1:

  I suggest you run the patch from the link below: printing problems and printing errors:http://support.microsoft.com/mats/printing_problems/en-us

  Method 2:

  Run the checker system files on the computer to check ay corruption in the file system. Link to get the procedure please refer to: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):http://support.microsoft.com/kb/310747

  You can directly download the drivers from the link below:http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/pixma_mp270#DriversAndSoftware

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Print spooler is not working, printers are missing from the printers and faxes, add a printer failed with operation could not be completed

  Hi all
  We have a problem on one of our field of PC:

  • Parts of the printer in printers and faxes are missing.
  • The print spooler service stops.
  • Add Printer failed with the operation could not be completed error

  Have tried the steps:

  1. Restart the print spooler service
     The service could be restarted, but stops again when I tried to do something in the windows printers and fax machines, such as adding a printer, or open the properties of the server.
  2. Follow the steps in Bruce Sanderson Web Windows http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm and http://members.shaw.ca/bsanders/FAQPrinting.htm
     All the steps have been followed, but still could not solve the problem.
  3. Follow the steps in the printer problems in Windows http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows
  4. Run sfc/scannow
  5. Run Chkdsk C:/f/v
  6. Run utility HP diagnostic Print as suggested by http://www.theeldergeek.com/forum/index.php?showtopic=17339

  I'm out of ideas.  Someone please suggest what to do about it.

  TIA

  ELL

  Hi all

  Fixed a problem.

  It turns out the key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Providers must be cleaned too - delete all subkeys (and their values) EXCLUDES the Internet Provider LanMan Print Services and printing keys (and their values).  A reboot is required.

  Hope it will be useful for people who have this problem in the future.

  Thanks for these folks spend their time to respond or read my question.

  See you soon,.
  ELL

• problem of CPP to 7031 error print spooler

  I have a DELL client computer that has a virus.   After virus cleaning and installation of Norton 2012, I worked all the problems left by the virus and anything but get his printer Dell 942 AIO work fixed.  It has disappeared from the list of printers and will not allow it to be added or reinstalled.  The error we get in case list is error 7031 "the print spooler finished unexpectedly", the version of the file 'netevent.dll"5.1.2600.0.  I've updated, netevent.dll, spoolss.dll and spoolsv.exe to a system that works with the same Windows XP Home edition.   That has not changed the error.  I then updated the files extracted from the installation CD.  That has not changed the error.  I get no response to your research on error 7031 on sites I have, and that includes Microsoft.   Everyone knows this error?  Thank you.

  When you say 'it has disappeared from the list of printers' do you mean that the printers and fax machines is empty or there are other printers listed, but not the Dell 942?

  If the print spooler service is stopped, printers and fax machines will be empty and you will not be able to add a printer.

  If this is your situation, and given that it's a Dell, which is often a rebranded Lexmark, have you looked at the print spooler service dependencies (start > run > services.msc > OK)?  Lexmark printers make the print on the LexBce service spooler, and if this file is corrupt, the print spooler does not work.

  The fix for the situation described above is to restore the default print spooler dependency as follows:

  Open a command prompt window (start > run > cmd > OK) and enter the following command:

  dependent on the spooler of sc config = RPCSS

  There is no space before the = but there is a space after it.

  If the above Gets the print spooler began, then remove and reinstall the driver for the Dell 942 as shown here--> in its first Article.  Don't skip step 4.

  For more thorough cleaning instructions printer driver, see--> http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Missing startup programs, printers uninstalled and run used print spooler

  Hi guys,.

  The title really says it all.   I am running XP.
  I tried to use my scanner but it will not work properly.
  I tried to use my printer laser hp 8000 and Canon S800 deskjet.   They are more installed and when I try to install I get an error that says that the print spooler is not running.
  All programs are missing in commissioning.   If I click on programs, then I can find them.
  Any ideas?   I ran, but I'm not all that good in the first place.
  TIA
  Greg

  "Missing programs" indicate likely malware infestation.  What do you use for an antivirus application and is his current subscription?  Have you let the subscription expires?

  Start with the download, install, update and run an analysis complete with each of these tools free amtimalware.  Do not run the scans at the same time.  Each is likely to take some time, so have something else to do.

  MalwareBytes Anti-Malware
  SUPERAntiSpyware

  Now for the symptoms.

  Hidden entries in the start menu > all programs

  Beginning > menu all programs is a combination of two folders (directories) on your hard drive:

  C:\Documents and Settings\All Users Menu
  C:\Documents and Settings\\Start Menu

  If the subdirectories in one or both of the above is given to the "hidden" attribute, you will not see the corresponding entry when you click Start > all programs.  To check and fix this, right-click on the Start button and select "Open" or "Open All Users" (you should do as well until you're through).  In the window of Windows Explorer that opens, click Tools > Folder Options > view.  Click on the button "Show the hidden files and folders" and uncheck "Hide protected operating system files (recommended)."  OK your way out.

  Double-click the programs folder.  Any folder that is hidden will appear "disappear".  Right click on each hidden folder, and then select Properties.  At the bottom of the general tab, uncheck the 'hidden '.  Click OK.  Select "apply changes to this folder, subfolders and files. Click OK.  Do this for all the hidden folders.  When you are finished, go back to tools > Folder Options > view and the changes that you have made previously.

  Repeat the above by right clicking on start and select open or open all users, no matter what you is not done everything first.

  Print spooler does not and empty the folder printers and faxes

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line (don't forget the quotes)

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on this site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• My printer is installed and then quit all of a sudden - when I go to the printers and faxes, he won't let me not reinstall my printer - the prompt says print spooler does not work. What I can do. "

  My printer has been installed then suddenly stop working.  When I go to printers and faxes, he won't let me not reinstall my printer - I get a prompt that displays the print spooler isn't available...  What is it and how can I solve this problem

  Printer in Windows problems
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;324757

  J W Stuart: http://www.pagestart.com

• Removed from Garmin using MSconfig and now I can't print. The print spooler is not running

  I wanted to speed up my computer and remove an item off my msconfig.  Now I can't print. missing spooler.  What should I do?  I tried dating back to some time earlier, but all previous changes are missing

  Operation could not be performed.  The print spooler is not running

  the question I wanted to delete was for Garmin

  don101947

  Hello

  I don't know if you have already solved the problem of the other answer, but here's something you can try if your not confident using the command line.

  Go to [start],-> [Control Panel]-> [administrative tools]-> [Services]

  Depending on if your running XP, Vista or 7 you can have 2 tabs at the bottom of the window you see.

  Select [Standard] if its not already selected. If you already have a large list, skip this step.

  Scroll down and find the print spooler. Double click it, and then set the "Startup type" to [Auto]

  then click [OK] and then make a right click again print spooler and select [start]