Source IP address of the originating call to sip trunk

Similar Questions

• After syncing firefox from one laptop computer to the other, I repeatedly get syncted phone has the same IP address as the original. Reverse?

  One of the results of these two laptops with the same IP address was that the original laptop computer proxy settings have been changed and I could not get into the internet. After you restore the default proxy settings, I again had access to the internet, but two laptops always have the same IP address.

  You do not use DHCP to automatically assign different IP addresses?

• How can I clean install Win 7 Pro on a series of 330 intel SSD using a Sony Vaio laptop as the source. I have the original disc and the authorization only

  My Office HARD drive had a fatal accident and poster now under vacuum. It was a disk of 1 TB with Win 7 Pro upgrade to Win 8 Pro.I have records of origin 32 and 64 bit OS and wish to install the OS on a SSD using the optical drive on my Sony Vaio, which will become then the boot drive in my office.

  [Moved from comments]

  You must do the installation on the desktop. You can not install windows on the disk into a computer and then move the disk to another computer and do work. When installation is complete, it reads information from the BIOS of the computer, on which it is installed and when you put the disc in another computer that Windows does not find the information used during the installation.

  You will need to put the new drive in the desktop, install Windows 7 on it, then upgrade to Windows 7 to Windows 8 again.

• CUCM v8.5 with 3 SIP Trunks to the Lync Server - Route algorithm of Distribution for the Group

  I CUCM connected to three different Lync server via 3 different SIP trunks.

  RG is composed of the following elements:

  LYNC SIP TRUNK 1 (1.1.1.1)

  LYNC SIP TRUNK 2 (2.2.2.2)

  LYNC SIP TRUNK 3 (3.3.3.3)

  The route group was built with "Top Down" the algorithm of distribution. The first SIP trunk knows congestion and some calls are never routed to secondary and tertiary SIP trunks.

  Based on all the forum posts I've seen - it seems that I have to configure the algorithm of group distribution of ranges as 'circular '.

  If I change the algorithm group of "Circular" lines - can I expect the following results:

  1. first call will go through LYNC SIP TRUNK 1

  2. second call will cross LYNC SIP TRUNK 2

  3. third call will cross LYNC SIP TRUNK 3

  When I change the algorithm of distribution of the route to the 'circular' group and click 'SAVE', I am invited on "RESET".  This service assigns to the existing calls through SIP Trunks?

  TIA,

  Amir

  Hello

  the circular algorithm will work the way you mentioned, but I suggest to try and make sure that is not perform integration

  to reset the SIP trunk actually active calls should not be made because the gose media directly between endpoint unles syou use something like trust rely wher evous enforce calls to go to the SIP

  Therefore, in most cases is should be fine just try configuration at the time of the calls will face service disruption

  hope this helps

• How to find the source IP address of open session with VC

  I gave only a single journal id for all users in my virtual environment. They all use the same ID for their own use. My question is how do I know the source IP address of the active\idle open session with VC?

  VC Server - version 4.0 - 208111
  vSphere Client - 4.0 build-208111
  Servers ESX - 3.5 build-238493

  Thank you

  Ganesh

  Take a look at the thread below, it might be useful

  vCenter session - find origin of connection

• Cannot change the IP address of the VM, error that says: this card address is already assigned to another adapter...

  I used VMware vCenter Converter Standalone client to migrate an existing to vSphere 5.5.0 server. It works quite well as a virtual machine, but I'm still in the testing phase. I wanted to put this virtual machine on the network, so I changed the IP address, so it would not conflict with the dell still currently running on the network server. I want to now change the IP address to what it was originally, but I get an error indicating that this address is already assigned to a hidden card. I have the option to accept the change, but I don't know what effect this will have with the network. I need to change the return address to the original static address or some applications will not be able to find the server correctly. Is this ok to restore? The name of the device adapters listed in the folder network cards is VMware Accelerated AMD PCNet Adapter, not the server vSphere Broadcome NetXtreme II adapter. I have attached the reference error message window. This a virtual machine in Windows Server 2003 R2 SP1.

  Thank you

  B

  Check this link I hope this helps

  VMware KB: Error of networking: IP already assigned to another adapter

• Transfer calls to SIP phones problem

  Hello.

  When a user with a Cisco 3905 tries to transfer a call to another IP phone, the call successfully diversion; However, the new beneficiary do not hear anything. If he speaks, the original caller can listen to it, but the recipient cannot.

  Is there anything us missing in our setup in the router of the CMF? All I could do to fix this?

  I attach the run-config and a message from ccsip debugging I extracted by a call that had been transferred.

  Whatever that either would be appreciated. Thank you!.

  Just to give more information on why this solves the problem, some devices/carriers do not manage the call for sendonly to switching sendrcv after a hold event and continue to stay in rcvonly.  This workaround lets the other side think that the call is in sendrcv mode all the time.

• The ID attribute of the station call needs for Anyconnect VPN client MAC address

  Hi all

  We test tring Anyconnect VPN users to connect using the certificate. ASA East of validation / authentication user based on cert and approval it requires Radius server (ISE). Currently ASA sends the Ip address of the VPN client in «calling station ID» We want ASA to send the Anyconnect VPN client MAC address to the radius server in RADIUS attribute «calling station ID»  Is it possible to do this. Get around them?

  Parag salvation,

  The calling Station ID always contains the IP if Anyconnect VPN.

  L3 is originally unlike wireless which has L2 Assoc.

  Currently no work around.

  Respect of

  Ed

• IP address of the source system in monitoring SOA

  Hello

  I want to make a list of witnesses where all source IP addresses will be there who ever called my services to soa server.

  Is there any soa server log that allows to capture such data.

  I am using soa 11g.

  Thanks in advance

  Well,.

  It depends what endpoints of service for "monitor." If you want to only capture incoming requests to the HTTP binding, you can use the access.log soa_server1/logs folder in your domain record. If you have SST as reverse proxy, use the web server access history.

  HTH,

  A.

• Moving the library back to the original source files

  I am in final cut pro x and by mistake I was importing my media AND copy the files in the library instead of him reading from the original source.  I want to know if there is a way to go back and change it.  Thanks for any help.

  You can create a library and use the change settings of the Inspector to indicate the location outside the media library. Move the event / project (s) you want to have external support for the new library. Once you are convinced that events/projects in the new library are working, you can move events of origin to the trash. (Or yo can trash the entire library in the Finder).

  Russ

• Course VI Path returns the location of the original source file, exe does not.

  LV-2010 running.

  I have a VI that opens a PDF style manual when the user clicks a button.  My development project is configured with a project folder main and 3 subfolders called Source, Application and install.  Of course, the source code is in the Source folder.  I also have a copy of the manual for the Application with the application.

  When operating, the VI uses object traced the current VI as starting point for where is the manual.  Current path of the VI includes the Source folder in the path that it generates.  This is not a problem when you run the source code, like the VI is running in this folder.  Problem is that the Source folder is also included in the path generated running on the target computer running the exe.  There is no Source folder on the target computer, so I am at a loss to explain why this is happening.  It's probably a parameter in the constructor of my application, but I can't.  Never had this problem before.  Can anyone help?  Thank you.

  Start reading here.

• Windows Movie Maker 6.0 error during recording: check if the original sources are still available, the saving location is available and if there is enough disk space

  Original title: Windows Movie Maker 6.0 Save Bug?

  Something's weird with Windows Movie Maker...

  It cannot record movies, I create somehow.

  Immediamente when it starts to save, it gives an error signal: check if the original sources are always available (and yet, they all), there is no such thing as the save location (of course it is!) and if there is enough disk space (a lot of). Still, it will not save. How can this be possible?

  I use an mp3 file (pendulum - watercolor) and have a lot of footage, often used with effects. They are 1280 x 1024 and a .avi file. Everything should work fine, but still does not work. Help me!

  Something's weird with Windows Movie Maker...

  It cannot record movies, I create somehow.

  Immediamente when it starts to save, it gives an error signal: check if the original sources are always available (and yet, they all), there is no such thing as the save location (of course it is!) and if there is enough disk space (a lot of). Still, it will not save. How can this be possible?

  I use an mp3 file (pendulum - watercolor) and have a lot of footage, often used with effects. They are 1280 x 1024 and a .avi file. Everything should work fine, but still does not work. Help me!

  ============================
  It is sometimes possible to publish / save in the
  Even if the DV - AVI format. WMV fails. If you are
  running Vista Movie Maker 6.see the following:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  WIndows Vista Movie Maker 6
  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  And sometimes unchecking that will enable all filters
  registration in progress...

  Reach... Tools / Options / compatibility... tab and
  Uncheck all filters / OK.

  The error that you received can be caused by the following:

  (1) source incompatible or damaged files (photos,
  video clips, audio clips).

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  (2) the project is too big or too complex for your system
  resources. Made video is time CPU and
  can sometimes cause blackouts.

  The following items may be worth a visit:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/

• I get the thing "Call us overprotective", but where it says 'where do we send your code' is coming with an e-mail address, I have never seen/used

  I tried to access my account email for weeks, but it is always with the thing "call us overprotective." I tried to get them to send me the code, but the email address, it will send that is same as iv email address never seen/used/heard about in my life. I have very important emails on my account and I need to access it, but have no idea how to... someone help me? It also won't let me go on my Skype and continues to appear with the same thing.

  Since you have never heard of this address and you have never seen him, I would go here immediately point out that someone has hacked your account.

  • "Report that someone else is using my account.

• How to get the IP address of the calling client to the web service built in Jdeveloper 11.1.1.7 application?

  I built an application of web service in Jdeveloper 11.1.1.7 to be used by other clients. Just the General steps as follows (Server web service Application is generated--> deployed on the server-> used by clients with the location of the WSDL file).

  Now, I met a requirement where I need to get the port number and IP address for the client.

  Questions :

  How to get the IP address of the calling client to the web service application generated in Jdeveloper?

  Commune technologies used to build web service applications is AXIS or CXF. What Jdeveloper technology use to built web service application?

  The common technologies used to build web service applications is AXIS or CXF. What Jdeveloper technology allows built web service application?

  It depends on the option selected during the creation of web services (if I remember correctly, there are several options, style J2EE 1.4 RPC style JavaEE JAX - WS 1.5,...)

  For example, to get the ip address of the compatible with jax - ws web service, you need to inject the context in your service class with:

  @Resource
  WebServiceContext wsContext;
  

  and then inside your method:

  MessageContext mc = wsContext.getMessageContext();
  HttpServletRequest req = (HttpServletRequest)mc.get(MessageContext.SERVLET_REQUEST);
  String ip = req.getRemoteAddr();
  

  Dario

• find the path to the original source file

  How to find the way to original source file in Lightroom?

  Hi richardc,.

  Right or Ctrl click on the file in mode grid, then click Show Explore / Finder to see the location of the original file when its connected to the Lightroom Catalog.

  Let us know if this helps

  Kind regards

  Mohit