Sourcefire DC1000 support?

Similar Questions

• Failure to download sourcefire intelligence feed

  I have a Cisco's Firesight device that gets the following error

  Received Soucefire_Intelligence_Feed code (impossible to download the file)

  Since the update system to 5.4.1.8

  I went through all the troubleshooting steps described in this document

  http://www.Cisco.com/c/en/us/support/docs/security/firesight-management-...

  and everything seems in good condition. No problem to set intelligence.sourcefire.com or do a curl command, etc.

  Firewall is open to this host (nothing has changed it)

  Does anyone else have this problem? What is going on?

  I had this problem as well. I opened a case of TAC with Cisco and they said it's a new bug (CSCvb70107). It was Wednesday, October 12, 2016. I received today a power update without making any changes on my system.

  Problem with hosting power of security intelligence.

• Upgrade to version 6.0 SourceFire Module questions

  We have just implemented SourceFire Module version 5.4.1 on our ASA recently, but want to upgrade to version 6.0. I've been through Notes version 6.0 for the upgrade, which are dated to November 2015, but had a few questions that I was hoping someone here could answer:

  -Our FireSIGHT Management Center is a virtual appliance of 64-bit. Can we install version 6.0 on a virtual appliance VMWare running on EXSi 6.0? The only issue date list 5.1 and 5.5 ESXi ESXi.

  -Should what files I use for the update? The Release Notes say to use "SourceFire_3d_Defense_Center_S3_upgrade - 6.0.0 - 1005.sh. My choice on Cisco's Support site are: asasfr-sys - 6.0.0 - 1005.pkg, asasfr-5500 x-boot - 6.0.0 - 1005.img and Cisco_Network_Sensor_Upgrade - 6.0.0 - 1005.sh. I guess the sys-asasfr - 1005.pkg - 6.0.0 is for CME, and the Cisco_Network_Sensor_Upgrade - 6.0.0 - 1005.sh is for the ASAs.Is that right?

  -How long will the update for FMC and ASAs? The ASA is a 5516 x and the release notes look like they say that the update will take about 41 minutes.

  ESXi 6.0 is not officially supported so that your experience may vary. If you get stuck, you may TAC by telling you that you're on your own.

  "Cisco_Network_Sensor_Upgrade - 6.0.0 - 1005.sh" is used to upgrade the fire ASA power module in the Manager of firepower.

  If you were a fabricated construction or reimage then you would use the boot images and sys respectively.

  41 minutes for CME is right. As mentioned Philip, 2 hours is a better estimate of the ASA module, especially on a smaller area as the X 5516.

• Sourcefire upgrade question

  I am after a few tips here.

  I have two management centres sourcefire (devices MC2000) running 5.4.1.7 par HA. They would have been on version 6 but 6 did not support HA.

  Now 6.1 was released, it supports HA for management centres.

  However, the path of 5.4.1.7 upgrade is...

  Version 5.4.1.x > Version 6.0 Pre-Installation Package > Version 6.0 > Version 6.0.1.x > Version 6.1orVersion 5.4.1.x > Version 6.0 Pre-Installation Package > Version 6.0 > Version 6.0.1. > Version 6.1 Pre-Installation Package > Version 6.1

  So this means that I must break the pair HA upgrade devices and then reform the AP. Or would you break the HA pair, upgrade an application and recreate the image on the second application then join the AP. Finally there is an option to reimage the device and restore the database to the new box. I'm trying to find the best method to do this. Giles

  Your first method will work.

  There is an iso image "Sourcefire_Defense_Center_S3 - 6.1.0 - 330 - Restore.iso ' at https://software.cisco.com/download/release.html?mdfid=286290710&flowid=...

  Unfortunately, you cannot restore the backup version prior to the latest version.

• Firepower supported devices

  There are differences in supported features of firepower for the series 2 and 3 materials. Is there a clear vision of what devices are series 2 and 3 series which devices?

  Material series 2 are the oldest brand devices Sourcefire. They were all end of 2012 sales or more.

  They include the following models: 3D500, 3 D 1000, 3 D 2000, 3 2100, 3 D 2500, 3500 3, 3 4500, 6500 3.

  All other dedicated NGIPS devices can be considered as the 3 series.

  (Modules ASA power of fire and any new firepower 9300 and 4000 series is in a separate category and neither series 2 or 3).

• SourceFire updates

  Hello.

  The company that I work has defence of SourceFire Center 3000 with sensors on 4 different sites.

  The current version is 4.10.3.4 on the center of the defense.

  Can I upgrade to the latest version? 5 xxx or what new devices?

  Also, can someone advise what is the S3 patches? One of the devices requires S3 patches but others do not.

  I'm new AourceFire ro and I just need to develop a plan to update.

  Thank you

  The current software management center FireSIGHT (5.4) is generally applicable to most devices, including the DC3000. The release notes , list specific models that are supported.

  You need to upgrade is steps vs go directly to the latest version. From 4.x to 5.2 requires reimage. Reference.

  S3 patches apply to the devices and sensors of the series 3. Older are series 2 and don't require these hotfixes.

• East - CSM 4.4 and above all the supported server certificate?

  Dear all,

  We have Cisco CSM 4.4. I want to know instead of a self-signed certificate, can we import CA certificate or Certificate Server internal?

  Please let me know if a newer version of the CSM supports this feature...

  Thank you & best regards

  Ahmed...

  You ask on the certificate for the server CSM itself? To do this, CSM only supports self-signed certificates generated during installation. Reference.

  The same restriction applies even on the current version of CSM 4.7. I doubt he will be changed as this product will probably end-of-sales in the next 12-18 months (in favour of the mash-up of PRSM and product obtained through the acquisition of SourceFire Defense Center).

• Secure erase is supported in the Sierra

  After downloading Sierra I can't secure erase access via finder?  How files are securely erased using Sierra 10.12?

  Hello TaxiFish,

  You must encrypt the drive with FileVault first. Then just delete. Apple now uses SSDS in most of their machines and these drives don't support secure erase.

• Access denied... Apple Support pages

  Someone else gets this error on Apple Support Pages?

  

  alexbird wrote:

  Someone else gets this error on Apple Support Pages?

  

  first time I saw it.  How do you access the support page?

• I have an iPhone 6 more, an official version of China, it shows a battery indicator when I turn off support, is this normal? I can depulicate this function to another iPhone? I know how?

  I have an iPhone 6 more, an official version of China, it shows a battery indicator when I turn off support, is this normal? I can depulicate this function to another iPhone? I know how?

  I remember reading somewhere on the Apple site in recent years on some models of Chinese iPhone with this capability. No other iPhones display this and there is no way to enable it. I can't find the article which includes this information.

• UK supported Japanese MacBook transformer?

  My friend has an old (c. ~ 2012) the Japan MacBook, they next transformer 60W MagSafe (A1344) and use a converter to the British type BS 1363 plug.

  MagSafe: https://cl.ly/0g2G2T2a3e2I

  BS 1363 Converter: https://cl.ly/2S3M3p3c3H2u

  It of an ugly solution and is not quite secure when it is plugged into the wall outlet to their liking. I suggested the official Apple UK adapter, but are unsure that it will convert just as the other plug.

  Apple UK adapter: http://tinyurl.com/jx3gh6u

  Is it safe to use the Apple UK adapter in a Japanese MagSafe 60W transformer?

  Hello hamper,

  Thank you for using communities of Apple support.

  I see that you are looking for an alternative through a converter card to use a Japanese plug and adapter in England. An option for you is this available in the Apple Store adapter kit: Apple World Travel Kit adaptor this kit contains the UK taken adapter, as well as adapters for other systems.

  Best regards.

• How can I buy tokens to play poker zynga with an ITunes gift card that I download on my ITunes store account. the system on my IPhone gave me the following message "your purchase cannot be completed, to contact Itunes support support a.

  How can I buy tokens to play poker zynga with an ITunes gift card that I download on my ITunes store account. the system on my IPhone gave me the following message "your purchase cannot be completed, to contact Itunes support support on this Web site, www.apple.com/support/itunes/ww/.

  Click here and ask for help from the staff of the iTunes Store.

  (145085)

• Notegorical app?  IOS 10 support?

  Hello - I was using Notegorical app to track very important info.  However, as I downloaded iOS 10, I can only see the notes I made, I can not add or copy/paste into another application.  Can someone tell me how to solve this problem or move my info to another application?  It's really terrible and I need help!  Help, please!  Thank you!!

  Thia

  You must contact the developer application or its support page to see if the app is supported in iOS 10.x. It is possible that the application must be updated for iOS 10.x, and they have not yet done.

• iTunes requires a newer Version of Apple Mobile Device Support

  I recently had a problem with iTunes not recognizing my iPhone, so I reinstalled the latest version of iTunes on my PC. Since then I have now received this error:

  iTunes requires a newer version of Apple Mobile Device Support. Please uninstall iTunes and Apple Mobile Device Support, then reinstall iTunes.

  I followed these steps, only to get the same error. I then stopped Apple Mobile Device Support Services, manually delete the files in c:\ProgramData\Apple\Installer Cache, repair the installation of iTunes and restart services, only to get the same result.

  I use iTunes 12 and 10 Windows.

  Would like to be able to sync my phone again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  See iOS device is not showing in iTunes for Windows , if the device will not connect to iTunes after reinstallation.

  TT2

• iTunes support question

  HHaving a problem with using iTunes, I reported a problem of repayment, and I got the email from 48 hours to say that someone will be in touch within 48 hours and it's been about 2 weeks now and still have not heard anything yet. Is it possible to get it to speed up

  You have verified that the Junk folder and the Inbox on the mail account? If there is also nothing there contact support and include your original file number