SP A60 won't standby more

Similar Questions

• iOS 9 and all its updates have ruined my iPhone and iPad. Now my iPhone works hurt more than my Galaxy 6 Edge. Best Apple he meet, or I won't spend more money with them!

  iOS 9 and all its updates have ruined my iPhone and iPad. Now my iPhone works hurt more than my Galaxy 6 Edge. Best Apple he meet, or I won't spend more money with them!

  If you have any questions, then explain your problem in detail and ask him.

• System failure-Equium A60 won't boot to the top

  Hey guys & gals
  for the first time using this site and need some advice!

  I have a toshiba laptop
  "equium a60 model PSA67E-No.-00200D8J.

  Ive had problems with my start up! I get an error message saying: I have a missing driver!

  read the MSG error-"system32\drivers\ntfs.sys".

  Also get message...

  "windows was not start because the following file is missing or damaged:
  system32\DRIVERS\isapnp.sys ".

  Unfortunately I can't find my original CD boot disk & I don't want to lose the files saved... not too good sense when it comes to problems with this...

  If anyone can give some advice please, it drives me crazy! Laughing out loud

  Alan.

  Heyho,

  looks like you're in big trouble. I think the only chance to backup your files is to get some linux live CD (knoppix, ubuntu and mandrake) and an external hard drive to copy the files to your hard drive internal to external hard drive attached.

  The best way would be to ask a technician or a guy who is VERY familiar with computers to backup your data.

  After that you need to reinstall your operating system but without the recovery CD, you are out of luck. Then you don't have a lot of options.
  One of these options is to look for startup disk or how to call it: "restore CD". If it is not available you should contact an authorized local dealer servicepartner toshiba and get a new recovery disk. The last option is to buy a Windows XP or to ask someone (family, friends, the one who) for a Windows XP to install.

  Greetings

• Equium A60: graphics issues and more

  Ive had so many probs with tis equium a60. It was overheating, stand by was not working and now the graffics were spoil! I rang this place recommended pcworld n they said try to format (large). anyway I restored it to factory settings while he was exactly as it was when I got it. stand is now working properly :) but it still is overheating (I mean really, it becomes it hot) and the graffics are always spoil.
  What happens is the screen freezes for a few seconds, then he goes the worst possible of display settings, so everything is massive and the colors are all wrong. and a pop up in windows as a encountered an error please reboot.
  This happens only at random times, I do not understand why ive formatted. I don't know if the card graffics itself is exhausted. any help or ideas appreciated. see you soon

  Hi Dave,.

  I think he should assume that your problems stem from overheating. It is very common for the dust and debris to form and block the passage of air through the CPU cooler. I suggest trying to remove such an accumulation or blowing into the heatsink (towards the cooling fans), or by sucking debris with a household vacuum. If all else fails, then you can remove the heat sink and the dust before replaceing it. Beware that this may invalidate your warranty.

  Normally a thermal trigger remove power if it detects the CPU heat too, but this does not mean that other problems cannot occur.

  If you still have problems with you appear after you have addressed the issue of overheating then please post again.

  HTH

• Equium A60 go in standby mode after the reinstallation of the OS

  Hi all, I just formatted my laptop and reinstalled windows etc... and now my phone will not go into sleep mode, when I go to "start, stop the computer" standby is not selectable and in my properties of power the only option for "when I close the lid on my computer" is to do nothing, I tried the latest toshiba power saver driver, any other ideas?

  Thank you

  HI Matt,

  If you re-installed your system from an installation of Microsoft CD then you will need to download and install the Toshiba power management utility. This should allow you to select the options standby and hibernation correctly.

  You may also like to see the following Microsoft Knowledge Base article: -.

  http://support.Microsoft.com/kb/266169/

  Kind regards

• My pc won't standby and the screen saver does not work. Any help?

  I set the screensaver to go after 1 min, but it doesn't. I can get a preview of the screen saver and the part is ok.  In power options, I put the pc into standby after 5 min, but it doesn't.  I ran a few utilities and a couple came back, 'screen saver fixed', but it still does not work. Help!

  I set the screensaver to go after 1 min, but it doesn't. I can get a preview of the screen saver and the part is ok.  In power options, I put the pc into standby after 5 min, but it doesn't.  I ran a few utilities and a couple came back, 'screen saver fixed', but it still does not work. Help!

  Hello

  Functions of the screen saver and sleep depend on the computer to detect an idle state. An idle state is reached when the computer detects no activity on the system. Once reached the idle state, it must maintain a State of rest for the period that you define in the element.

  If you have any device connected to the system that periodically checks for a specific action, this device can cause the system to achieve or maintain an idle state.

  Some devices, such as a device of VOIP phone that checks for incoming phone calls is an example. If you have a MagicJack or any other similar device, try to remove them and check if this solves the problem.

  Another culprit is an e-mail or instant messaging program that periodically checks for new messages.

  Tell us what you find.

  Concerning

• Windows 8 pro with media center won't standby automatically

  My version of windows goes to sleep when I press the power button. However, he won't go to sleep automatically. I followed the advice of the following (http://answers.microsoft.com/en-us/windows/forum/windows_8-pictures/windows-media-player-prevents-automatic-sleep-on/40fb4baa-0930-4efb-b352-01cb3a19ebc5) discussion and it did not work. I followed the advice in this discussion (http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/my-computer-wont-automatically-go-to-sleep-after/fb56b54e-0572-40a1-b88e-df142ad0e057) and found that my computer went to sleep when I disabled all Microsoft services. Many of these services are required for the computer to operate. Please get back to me and tell me which I should turn off for my computer and windows media center will operate normally.

  Power off of the Group residential seemed to solve the problem.

• Equium A60 won't start - error message: Load needed DLLs for kernel

  The problem is the following; in an attempt to start, I get an error message: "Load needed DLLs for kernel.
  Re-install? I made this countless times.

  Following forums, I discovered that this could be a memory problem. However, my laptop has a built-in RAM and I can't change it. I changed that in the expansion without result slot.

  Any suggestions on how to deal with this problem will be greatly appreciated.
  Blessings on you.

  Hello

  Richard's right. Also check it please this document http://support.microsoft.com/kb/812450/en-us maybe it helps!

• Hard drive, at default, installed the new hard drive, Windows XP Home Edition won't start more additon error 800b0100 does - is what I do?

  My computer is 4-5 years: Inspiron 530, my operating system is Windows Home Edition SP. My hard drive has failed. I installed another hard, formatted drive with the CD that accompanies the Service Pack 2 computer, and then tried to install (from CD) Windows XP Home Edition, has received the error 800b0100 message.  What should I do?

  Hello

  1. what kind of hard drive you are using? IDE or SATA
  2. What is the full and exact error message?

  Check if the following steps will help:

  1. While the installation program is running and the error message appears on the screen, press SHIFT + F10 to start a command prompt.
  2. at the command prompt, type cd\windows\system32\ and then press ENTER.
  3 type rename catroot2 catold, press ENTER, and then restart the computer.
  4. check again the issue.

• Computer Windows Vista won't standby automatically

  I have Windows Vista.  I had a problem because I put it to sleep and he "wakes" almost immediately.  I've remedied that by changing a setting such that the network card might is no longer 'wake up' the computer.  So I can now put to sleep manually.  However, I have the 'Power Options' so that he should go to sleep automatically after 20 minutes of inactivity, but not the value.  How can I get to go to sleep automatically?

  I have Windows Vista.  I had a problem because I put it to sleep and he "wakes" almost immediately.  I've remedied that by changing a setting such that the network card might is no longer 'wake up' the computer.  So I can now put to sleep manually.  However, I have the 'Power Options' so that he should go to sleep automatically after 20 minutes of inactivity, but not the value.  How can I get to go to sleep automatically?

  No, I'm not using a wireless mouse.  Or keyboard.  I have connected the device are:

  USB stick (ordinary reader, not a flash drive)

  Phone Skype ("Logitech Cordless handset")

  Mouse, keyboard

  At the present time, no printer, but sometimes a printer

  Ethernet cable

  Speakers (which do not work, but that's another matter)

  Have you used this tutorial?
  Options power and Sleep Mode problems

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

• my hp laserjet 1300 printer does not print more using my iMac with the latest OS

  Since the upgrade to the latest version of the OS (10.11.4) software my hp laser jet won't print more

  Try resetting the printing system reset printing on your Mac - Apple Support System

• Satellite A60 - recovery and install xp problem

  I have a laptop A60 which is slightly more than 1 year.

  A couple of days, about 2 minutes after the start, the screen flashed with a new window (I was unable to see the content, it's appeared and disappeared so fast), then the laptop turned off.

  I rebooted, could not boot into winxp I received the error message (please report this problem as a load dll required) missing file. The missing files were all of the system folder.

  I then tried the recovery dvd. Everything looked fine, however, he kept failing at windows startup.

  Whenever I start the machine now, I get the toshiba logo, which now has lines of Red pixels in the columns towards the bottom of the screen. The same effect occurs when I try to recover using the recovery dvd.

  After trying this for some time, I tried to install my own copy of XP home. The laptop starts, attempts to load the files needed for the installation of winxp, gets to the core of the dll and stops with an error 4 impossible to continue.

  The recovery cd and winxp cd are in good working condition - validated it on other machines.

  Once, the winxp set up did go to the options page so I chose the repair console. I was able to run fixmbr and fixboot. It worked, then I could use the recovery dvd and successfully recovered it. About 2 minutes later, once he had everything installed, I got a blue screen of death and had to re-boot - to see that I was back to the initial situation.

  I then used fdisk to set up new partitions. ]

  Now, if I try the recovery cd, the laptop starts to load the ghost file and then the screen turns white after a while - the same thing with trying to install a new copy of xp.
  I still get the red on the screen pixels when I try the recovery cd and when I start the machine and get the toshiba logo. However, when I try to install xp from my drive, the red lines, points, appear not at all.

  My feeling is that I had a master seed virus and need a new hard drive.

  Can someone please advise me on this... What do you think that is the problem? If you think it's a virus master seed aswell, can you please tell me what you know how I can fix this or I have to buy a new hard drive. What a RAM problem or a problem with the hard drive controller?

  For now, I am going through several thoughts, but keep coming back to the boot virus master = new hard drive!

  Any help would be greatly appreciated!

  Hi Paul,.

  In this case, my inclination is to suspect the RAM modules. This is based on the assumption that the screen initial 'splash' is not on the hard disk but is stored in the CMOS chip. The fact that your get the Red pixels when it appears would indicate a problem until the hard drive is still accessible.

  If you have restored your system using the recovery CD then the Master Boot Record will also have been restored (and is not infected).

  Of course, it is perfectly possible that your hard drive may also have problems that would explain the symptoms that you experience when you try to restore you system, but want to try simply to clean the dust from your CPU radiator (with a vacuum cleaner hose) before you try to restore again.

  The restore process causes a lot of heat to be generated, and you may well find that it is having a negative effect on your laptop.

  Kind regards

• Equium A60-692: sudden failure

  I have an equium A60-692, a little more than 9 months. For the past few weeks the computer just turned off while I'm working, especially watching a dvd. I removed the battery and restarted and worked normally. Is something wrong with the battery or the computer uses not common but the passage to the battery?

  Any help would be appreciated.
  David.

  HI David,

  There are two possible reasons for your problem,

  1: the laptop may be overheating leading to the power off. Normally, it is clearly the fan increased before the laptop closed.

  If this is the case try any dust/debris from your cooling fans with a compensation vacuum hose.

  2: your power system could suffer an intermittent contact of your power connector on your laptop, which causes the phone switch to battery power, even if the power supply is connected. Usually, this will require a power-stop/restart to restore normal operation. If this is the case, you will notice the low battery alarm.

  At 9 months, it is likely that dust/debris is your culprit so I would check that first.

  If you suspect your power connector then you should always be covered by your warranty even if you have to convince your repairman is not due to 'normal' wear

  HTH

  Post edited by: NickyNoogle

• Portege M100 - won't stand by

  I have a Portege M100. No reason he won't standby automatically if left on the battery. I checked settings power saver and they all seem to be ok eg standby after 5 minutes etc.

  Any ideas?

  Hi RogerGrand

  Will your laptop to sleep with connected AC/DC adapter, or it occurs only in sleep mode?
  Moreover, what happens if you choose the mode standby manually via start > stop > Eve. It work?

  In your case, I'll try to reinstall Toshiba Power Saver. You can find it on the page of Toshiba. AFAIK Portege M100 is in * archives * because it s pretty old book.

  Good luck! :)

• Equium A60 has recently started to overheat

  My Equium A60 has recently begun more heating really bad. It's at the stage where I can not install windows XP on it without him turning off during the installation of precession.

  Anyone know what could cause it to fire so quickly?

  Thanks in advance.

  Hello

  Especially the laptop overheats because the cooling module doesn t cool unique pieces in the right way.
  Fans do not twist full implementation because of the dust and debris inside the laptop.
  After a long time working, it s advisable to clean the cooling modules.

  How?
  Well, the simplest method is a use of the vacuum cleaner. But be careful

  If it helps the laptop must be checked by a technician.
  The technician can renew the thermal paste between the CPU and the cooling module.
  Important to take heat from the CPU thermal paste.

  Last but not least do not forget that there is enough free space around the laptop.
  The free space is important for air circulation correctly