SP4600 and Question Wifi power control.

Similar Questions

• Unable to control an Audio button and icons Wifi-HP Pavilion DV6-1235ee

  Hi all

  For a week or two, I'm not able to turn my Audio (same volume control) or the buttons on Wifi using the one-touch button (on the same electric switch Board) in my HP Pavilion DV6-1235ee laptop.  I rebooted several times and reinstalled the chipset driver and driver entry guess it would contribute, to no result.

  I did not something strange in the computer, but installed a few applications related to my work.  And I'm not used to regularly stop or restart my computer, but keep him locked.

  My OS: Windows 7 Professional X 64

  Help, please

  Hello

  It is always interesting to try a Hard Reset as follows.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, plug the AC adapter and see Start Notepad.

  Kind regards

  DP - K

• 3G RF Power Control Utility

  What it does and how to use it?

  Thanks for the replies.

  Hey,.

  Toshiba RF Power Control Utility for the radio transmission of interruption of the WAN connection (3 G/UMTS) wireless. The RF of WAN (3 G/UMTS) wireless transmission is blocked, this PC is used in the secondary Portrait display Position.

  If you have any other questions, please let me know! :)

• What are the icons of power control Widget?

  I've had my Motorola Atrix HD LTE for about a week now.

  I have the power control Widget on my main screen so I can quickly turn on/off wifi, bluetooth, etc. There is an icon on the widget, I don't know what it controls. It is two half circle arrows (see image). What is - this and it controls?

  Thank you!

  Adjustment power widget The Power control Widget gives you a brief overview of some of the tools that can drain your battery. The widget can enable / disable several features: Wi - Fi, Bluetooth, location (GPS) synchronization and also to adjust the brightness of the screen.

  Synchronization means sycing contacts, facebook widgets and other background data.

• There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?

  Hi, I m a bit new in LabVIEW and I'd like to ask a few questions...

  -There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?

  -One API PI or raspberry beaglebone exists for LabVIEW?

  -Power supply Wich can recommend you control with LabVIEW? (some chip solution witn 0 - 30v / 0 - 3A DC)

  Thank you very much for your advice!

  Best regards

  Elena

  Elena,

  I know raspberry, so no comment on that.

  For the rest:

  -Do you want to create tools for developers? If so, we must look in the API of project VI and VI server. If this isn't the case, please compile your application LV as executable and call this one using a batch file.

  -LV prefer specific supplies. LV is a programming language. There are several power supply providers (including OR) which provide directly the LV API for their power supplies. So, essentially, the approach is:

  1. choose food that serves your needs.

  2. check if the power supply has a standard interface for programming (such as Ethernet, GPIB, or if the power supply is PXI, is already providing a programming interface!)

  3. check if the LV API (so-called "instrument driver") is available for the device. In the case of a PXI system, get you a device driver (for example NI DCPower).

  4. check if the LV samples are available (for example in the Finder for example LV once you have installed the driver).

  Norbert

• Edge of 530 slow wake up and question about wireless relatively to sleep

  Hi, I have a 530 advantage, I got it 2 weeks ago, running on windows 7 64.

  I found that on its quite slow to wake up default settings, I made a change that has been to the wireless card, I checked the allow my system to disable wireless to save energy (so it stays on). This seems to have made an immediate difference and the laptop wakes up now a lot faster.

  The problem now is to have this option checked, when my laptop wakes the without wireless is disabled when he wakes up and will not turn back, I have to turn it on manually. If I leave the power save option checked for the wireless card, that it automatically connect when my laptop wakes.

  Seems a little odd I thought uncheck the option to allow my laptop turn wireless off means he must just stay on, but he seems to have the opposite effect.

  Can someone advise? everything I wanted, it was for my laptop to wake you up more quickly and the wireless is turned on or auto connect after he wakes up.

  Thank you

  James

  I found myself the answer to this question, I found that I had to uncheck the same box in the bluetooth device, it does not work exactly as I wanted to and the wifi connection is more lost once I wake up my laptop

• Power control Widget

  I have the Widget of power control on one of the screens of my RAZV.

  I worked that 4 of the 5 buttons do, but I'm at a loss for what is one of the 4th. It looks like a symbol of 'sync '.

  I can turn on and off but have no idea of what he does as well as the manual does not mention it.

  Any ideas?

  Dave M

  Hi Dave M,.

  The 4th symbol is indeed for the synchronization of the 3G network. It comes to emails, the substantive activities of the applications and more.

  Read here for more information: http://support.google.com/android/bin/answer.py?hl=en&answer=1663705

  Hope that helps.

  See you soon,.

  Nicole

• Communication satellite U500 wifi switch control does not work

  Hello

  I have problem after update of the operating system from Vista 64 bit to win7 64-bit. The problem is in the wireless communication switch command before notebok. When I was with win vista, it works fine, post off - wifi off and post-wifi on (without restarting). But when I updated to win7 and install all the drivers of toshiba upgrade dvd, my wifi switch works as follows:

  When I turn on notebook with wifi off button - its turned off all the time and the wifi does not work and fn + F8 (shortcut key for wifi) does not work too. I have to restart the PC with wifi switch in position-the wifi works fine and fn + F8 is able to turn on and turn off the wifi. But that put the material do not react to pass and - diode LED is always on (in case when I start the pc with position control on and in the case where is when off wifi LED is not clear and switching does not work).

  I've updated wifi realtek drivers but still it does not work. IAM verry sorry for my English. I was looking into Toshiba diagnostic tool and there is no modem device, but yes, wifi is perhaps problem here?

  Thank you very much for the reply. Tom

  Hello

  Different Satellite U500 (and other models) supports various wireless network cards, and that's why you'll find also different WLan card drivers.

  Your U500 seems to be equipped with an Intel Wlan card and here you can also download the right Intel Wlan card driver for this card:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• A USB from a PXI power control, turn the engine in real time

  Hello

  I need a USB of my target in time power control real (PXI) who installed the engine time real Labview (no windows installation).

  If I'm not mistaken, this is not possible with the USB port on the controller (NI PXI-8108) that I have not installed windows to recognize the device.  As far as I could see, it looks like I need to buy a special card for PXI that allows me to interact with USB devices.

  Is there someone who came across such an environment to see if it's the right approach?

  Thank you very much

  Dani

  

  For those who are interested, in order to control the USB equipment, the following requirements is necessary for a Phar Lap ETS RT OS operating system:

  In time real LabVIEW 2011 or higher
  VISA, 5.1 or higher

  http://digital.NI.com/public.nsf/allkb/5F30CD20D4D986CC862576CF00748B15

  http://digital.NI.com/public.nsf/allkb/ED3790E56FE969F8862575C30076063C?OpenDocument

  The upgrade of the system and the second link will allow such equipment.

  

• HP Pavilion dv6 6c51ea: upgrade of the dv6 6c51ea ssd and ram wifi card

  Hello
  As of late I thought the upgrade or replace my laptop, but I have a few questions to help me decide.
  First ram cited the speed of the processor is listed as 1066/1333 hz, however I can not check it on the site of hp and the crucial site recommend ddr3 at 1600 hz, the site hp also says is that 8 GB however apparently due to the fact that it was released on Windows 7 However the processor can support 16 GB max memory support and since upgrading to win 10 my system would be doing, is this correct?
  
  What kind of improvements I see by installing an ssd (Samsung evo 850) 500 GB?
  
  And finally the wifi card could be readily available and upgraded to the new ac wifi to use the router to HQ and speeds mon is provides and I pay!
  
  So basically will be the ssd, 2 x 8 GB 1600 mhz sodimm ram, and a wifi amd card equipped for the £300 it cost would he give me the jump in performance for his money as the cpu and gpu are rather dated now (i5 2450 m and radeon 7470 m) when a new system with an i5 4th gen with 1 GB graphics , 500 GB and 16 GB of ram, ssd would cost about £900 what would be the main benefits
  
  Thank you very much
  
  Shott

  I stand well partially corrected. The 8 gig RAM max was on the technical page of HP and the maintenance manual says maximum 16 concerts. As you note, it will run at 1333 mhz, but yes you can install 16 gigs and upgrade to Windows 10 made no difference there. You may installed 16 concerts with all 64-bit operating systems.

  Here is the Manual:

  Your repair manuals

  Page 28 - 29 a the list of supported wireless adapters EXCEPT the

  Module Intel Centrino Advanced-N 6230 WLAN 631956-001

  a mistake is well-documented. The part number is actually a single band card Ralink and other versions of HP of the 6230 Advanced-N used in some business models will not work in your laptop. We beat this horse dead on many posts here.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• cRIO - H bridge using the PWM output and input only encoder control

  Hello

  I am currently working on a project to control a 230V brushed servo motor using cRIO. The engine drives a linear step and the final project needs to create a control of position of the engine that the user is able to enter a speed, position and control steps to move to this position.

  I use a bridge using NOR-9401 and H to power the motor circuit and a PWM output to move the engine. I also have an encoder, quadrature, connected to a NOR-9403 read position and speed. I use the example program of encoder for the NI 9505 - in my application.

  There is no voltage or current on the drive circuit sensors so I wouldn't be able to have a closed loop current in this case. The scene release mechanism is such that the position is locked if the motor does not move and I do not need a torque control to keep the engine in place.

  To achieve this, I just wouldn't be able to use a single PID VI (probably the FPGA VI express for discrete PID)?

  I am not very well versed in the theory of control, and therefore no indication in the common sense would help me a lot.

  Thank you very much!

  Sexy,.

  in general, it is best to use a cascade control loop structure but in principle must also be able to use the output of the control loop of position as an input to the PWM generator. The main disadvantage of this configuration is the current limitation missing. Without current meaning is no longer the only way to protect your engine from drawing too much current to limit to the current maximum output of your diet, or to limit the maximum duty cycle of PWM. Without current information, the last method is quite inaccurate, but better than nothing.

  I agree with Mike, you should look in the examples of the 9505 module and use the controller position vi of these examples. This PID controller is optimized for motion control applications and it is implemented in the fixed point arithmetic, offering the best performance on and FPGA.

  Kind regards

  Jochen Klier

  National Instruments

• need to know how to block the ophcrack from running, my child uses this to get my password and in the parental controls in vista

  you want to know how to block the ophcrack from running, my child uses this to get my password and in the parental controls in vista. I have 3 accounts going 2 for children and one for the parents/administrator. I found ophcrack in several places on the computer. any help would be greatly appreciated

  The only question the idea of Malkeleah, that is when you put a password on BIOS, all you need to do is pop the battery from the motherboard and the password is gone. Faronics has in some programs such as anti-executable and a few other programs that may block the name or ID of a process and prevent it from running (some antiviruses have that option, such as Avast, but usually is a pain in the ass to configure)

• Windows Media Player and Cyberlink DVD Power

  Hello

  I have a two part question: 1) how is it that when I try to use Windows Media Player to play my DVDs on my computer, it will automatically switch to the Cyberlink Power DVD program? and (2) can someone tell me why Cyberlink Power DVD program plays all DVDs, some DVDs I try to play on my computer just end up in an empty black screen?

  Thank you.

  Hi Barry,.

  It seems that the default program to play DVDs is changed to Power DVD.

  1. you can choose a different program by changing the AutoPlay settings. Read the following article, and then select Windows Media Player for the categories you want than the media player to read.

  Change AutoPlay settings

  See also:

  AutoPlay: Frequently asked questions

  2. regarding the question of Power DVD, it is possible that the program does not play certain file formats. Visit the Web of Power DVD and check the types of files supported by the program.

• For the installation of Visual Studio 2013 and 2015, cannot be "changed" dialog "Programs and features" in the control panel of Win7

  In addition, Visual Studio shows a split second start screen, then disappears without any messages.

  Moreover, the same result occurs if I use the installation for each program file. In other words, the execution of the installation executable starts the Visual Studio splash screen, then disappears.

  No similar behavior occurs with any other executable installation files or the programs that are listed in the dialog box programs and features in the control panel of Win7.

  Same behavior occurs in safe mode.

  Hello

  Your question is beyond the scope of this community.

  Please post your question to the MSDN Visual Studio Forums.

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?category=VisualStudio

  See you soon.

• Questions of Power Options

  There are many Options of power that are difficult to understand.  I tried to find answers in the help, but there were many that I couldn't find.

  What is "slide show"?

  What is "the USB selective suspend setting?

  What is "PCI Express" and "Link State Power Management"?

  What is "the Minimum processor state"?

  What is 'cooling system strategy?

  What is "the Maximum processor state"?

  What is 'Java script timer frequency?

  What is 'reserve battery level?

  I have references for these or whatever the answers may be provided.

  Note - 04/03/13:

  Here is the reference to the "other matter" I had on power options, as mentioned in one of the positions below:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/can-power-options-be-copied-to-a-file/4ce04a5c-ed39-4AD1-828d-931ad4d34f0d

  MS documents I gave you links to your other question of answers to these questions.

  Useful reserve battery level settings would need more explanation.