Edge of 530 slow wake up and question about wireless relatively to sleep

Similar Questions

• Question about the power option "Sleep with a password on wakeup"

  What is the difference between sleep with a password required to wake up and lock? I understand that if I choose the lock, other users can still connect?

  Hello Jim,

  Please keep us updated on the status of the issue. I apologize for the late response.

  I would like to inform you that if you have not set a password on your user account, then Windows will not ask for the password to unlock or wake the computer from sleep mode. If you move the mouse or press a key on the keyboard, the computer will automatically unlock or to wake up the fashion 'sleep'.

  See also:

  Shut down (shut down), sleep, or put your PC in hibernation

  Power plans: frequently asked questions

  Hope the helps of information.

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  Thank you

• Various Questions about wireless access controller

  Help me please with these fundamental questions about the role of the access (AC) wireless controller.

  Assume that the access controller and Access Point are connected via IP:

  -Wireless frames sent to AP to acre; include the original MAC header (on the way to wireless access)?  If Yes, is there a Cisco AC gets to fill the WLAN and LAN it is plugged (which means that it outputs as ethernet frames as if they were issued by Mobile Stations).

  -Is the AC necessarily the default gateway for mobile stations? I guess not. But it is possible the default gateway?

  The Cisco AC can function as a DHCP relay?

  The AP creates a tunnel to the controller. All IP traffic from the AP to the controller will address the AP source and dest IP to the interface of the Manager of the AP on the controller. The wireless client traffic is encapsulated inside this tunnel. When it hits the controller the CAPWAP is removed leaving the customer's original package to be sent to the local network through the controller.

  The controller should not be the default gateway for wireless clients because it is not a router. Think of it as a device that converted into wired wireless traffic.

  Normally, the controller acts as a proxy DHCP. Once the customer has joined a WLAN, the controller sends the DHCP packets to the DHCP server on behalf of clients such as the IP address of assistance normally configured on the router for cable customers. You can also configure the controller to act as a DHCP server for wireless clients.

• Usually the questions about wireless

  I have a Toshiba laptop, and it has wireless lan card. He pops up she found a connection, and then it says to connect but when I connect and the realization of the connection, it appears and asks for a network key?

  What is c?
  It also comes with blue tooth.
  Any help on this please!

  Hi lucodunlami

  Looks like you are a beginner and don't know anything about the Wlan technology or login.
  I think that you have activated the Wlan antenna and the laptop looked for available wireless networks.

  The operating system supports an option to connect to a WLan that is available near the laptop.
  For most wireless LANs are secure and encrypted. If you n t know the encryption key (password) you can not connect to the Wlan key.

• Satellite SM30-604: 4.25 SpeedFan and question about the right temperature?

  SpeedFan 4.25 is on my Toshiba Satellite SM30 604.
  Until recently, the CPU usage shown was variable.
  Compared to a low percentage (green dots) to somewhere around maximum, according to what I was doing (I have never game, but use purely professional things like Word, Excel, PowerPoint and many websites).

  Temperatures in most of the green time, the high 40-links, the low 50-links (I then scroll to the top of the Speed01 of the fan from 0 to 50% and 50%, it starts to run). I sometimes add an external fan, I work sometimes in very hot climates).
  I have the readings of the time 4.
  Local temperature: 49 c (with this temp color varies between a Green V and a red arrow pointing upwards).
  Temp distance: 85 (with a flame)
  HC0: 26 c (with a green (V)
  Temp1: 86 (with a red flame).

  WHAT ARE THE TEMPERATURES IMPORTANT? WHAT IS LOCAL TIME? TEMP DISTANCE AND TEMP1?

  These very high temperatures, I've had for a day. The fan is working (I hear it, I can feel. "I can see, because I partly dismantled the laptop.) But the Speed01 is 0%, and there is no reaction on the adjustment upward. Or playback is 100% without reaction to setting down. And rotating or disable "auto fan speed has no effect.
  And without any other program running, the CPU usage increased a few seconds after switching on to 100%. I do not notice a significant slow down in the speed of my applications when I start using them. And a virus today scan did not reveal all the important things.
  I can't activate my taskbar more.

  Who has some answers for me. Green in this area?

  Thank you

  Hello Han

  Your ad is very nice and very interesting, but you'll be very happy if someone can explain all this because you are using a non-Toshiba software. It is always recommended to use the original software because software Toshiba designed has been tested and it can just to protect the hardware components.

  Use of software from third party is always at your own risk, and if you have any problems or questions, please contact their own support. They have much more experience with your applications.

  I can just tell you that you should be careful where your laptop is placed and make sure that the device can take a deep breath and cool down properly.

  Good luck!

• Update blackBerry OS Z30 10.3.1 - questions and question about how do to uninstall / restoration

  Hello.

  From the start, I try to stay calm and professional, objective. Pretty sure I missed the mark, but then, read on...

  I'm having some problems with the OS 10.3.1 update. Before someone says to the research councils, I. For hours. On various Internet sites. I would appreciate (but I'm not optimistic for) an official response from BlackBerry.

  1. I use a Z30. Carrier is Rogers Wireless (Canada) updates are off. Yet, incredibly, the update came down in any case, when I was driving, didn't know until I got home. Device to reboot and now 10.3.1xxxx is on my smartphone.

  QUESTIONS:

  1. the screen turns off. Whenever I wake up, the display is enlarged. I have to move and move and gesture to get the display to fit the screen, so I can't unlock the phone.

  2. the home screen is not editable and is the default value. Now I have to drag to the hub or my applications. Twice = 1/2 labour productivity.

  3. the assistants touted what, exactly? As far as I know is when I call via voice Bluetooth headset, the call would be (75% of the time) be done. The other 25% of the time, I tell him 'Call MOM Home' is not the same thing as "search battery charge. Yes, my bluetooth is a very expensive, side that has no problems of recognition with another device. Now, the vocal part (Assistant?) does not ALL calls. At best, it offers me suggestions, usually not related (Linda <> Tom) and wasting my time reading on several TELEPHONE NUMBERS. Good grief, if I knew that the darn phone number, I just say, call (phone number). It would be faster than the sitting through it all. In otherwise, voice Assistant something doesn't do much for me. I put it, as far as I know, to do the minimum, not interact with everything on my phone.

  4. Although the new camera app now (finally!) makes the colors more or less correctly, whereas before everything was tinged blue, I'm not a fan of the new positioning of the controls. It's ridiculous to put the video button next to the "Take a photo" button. The touch sensitivity is therefore, that I find myself video recording rather than take a picture wanted - and the time is lost. I really miss being able to touch the screen to take a photo. Now I need to aim a small dot at the bottom. If I wanted an iPhone, I would have bought an iPhone!

  5 more at the front of the camera, it is now difficult to take pictures. As in, I touch the icon to bring up the list of photos, and the last shot never appears. I have to slide to find. And in a different direction now.

  6. in the hub, in particular, the "select multiple" used to be in the middle of the menu. Now I have to scroll down to find and activate it.

  7. What is with the battery drain honking? More DIY required on my part to get it back to waiting for 4 days, that I used to enjoy?

  LACK OF UPDATED FEATURES:

  1. I was really hoping that this last updated with the NUMBER of the entry of the phone display. As job 1, 2 work, etc. I find it helpful to assign the direct number always as job 1, then toll-free as job 2, reception work 3, home knit 4, and so on. Then it is easy to use (or was) to call the number I want without knowing what really is the number of votes. I was hoping also that the update which would therefore eliminate offensive message 'next time, just say call xxxxx Mobile 2' or something else. I'm bloody well would be if there was anything in contacts to display the sequence of numbers.

  2 calendar. Seriously, why can't set a reminder for somewhere between 3 and 7 days? I'm so tired of defining a day (7-3), making the calculation in my head to work around weekends or other events) and then having to update the reminder when I get to the range of BlackBerry - approved 3 days. Other smart phones allow a custom setting. I would also ask, put first the custom reminder. We do not do scroll all the way down to find!

  3. I would like to put my icons used on the fricking HOME SCREEN! I don't like the cutesy pictures. I'm trying to do my job more quickly and easily as possible.

  4. fix the darn voice control mechanism. I bought expensive pieces of Bluetooth. All I want to do is voice component. That's all.

  5. get some control over the spelling. There is no way to change the words that are "learned" through the monitoring of its use.

  6. enough with the U.S. - marketing. Mountain time is Mountain time. Not US - MST. I'm not picking up something like that, I don't like that who commits an offence. He is as stupid as the settting (like Apple) zones in the "Calgary, Alberta." I do not live in Calgary. I don't live in the GENERIC Mountain time zone.

  7. taking the floor, I also speak English. Not American English U.S. - spelling. How about giving some love to the Canada

  8. give me the option to restore the update. Or at least choose what parts I want.

  9 extend the supported file formats. At this stage, I can only load documents on my smartphone if they are Adobe or Microsoft Office. Here's the thing - I operates in the universe of Corel WordPerfect. If the Z30 is limited in what I can / can not do with it. Why the hell can't I just copy my FILES to my phone? Even if I can't change them, I can use the chip memory 64 GB huge like a flash drive to take my files with me when I travel. I don't always take a computer... sometimes I use which is destined. More have them on the phone SHOULD allow me to email them or send in other ways... whether or not BlackBerry to read.

  ===================

  REQUEST FOR ASSISTANCE:

  Best - out an immediate UPDATE to solve these problems and to add the features I pointed out above. I'm probably not the only one faced with limitations integrated interface and the information screens.

  Please tell me how I can restore / uninstall / whether this "update".

  I shudder to think that the only solution is to backup, recovery, and then reload the Z30. Others have tried and failed.

  MORE VENTILATION;

  The only reason why I'm still on BlackBerry, it's that the questions and to some extent a difference of perspective in regard to the available phone / features are even less problematic on BB Z30, they're on ios or android platforms. Quite in my opinion. But then, I'm the one with a frustration level into the red zone.

  Thanks for reading. I'll be even more grateful for the resolution of some.

  Cinereo wrote:

  QUESTIONS:

  1. the screen turns off. Whenever I wake up, the display is enlarged. I have to move and move and gesture to get the display to fit the screen, so I can't unlock the phone.

  Go into your settings > accessibility > and disable Mode magnify.

  If you do this, I would like to read the rest of your post and see what I can help with... and Yes, staying quiet is a great feature... I understand that you might be frustrated.

• Little help General and question about layout theory

  Hello... any help appreciated:

  I am a photographer who has always been a person DIY.  I built a Web site for my work on my own using Dreamweaver and some tutorials online.  He comes back, it works (although a little slow), but the code would, I imagine, most of you take your computers and whiten your knuckles.  In short: it works on the tape, Staples and ideas of jerry-rigged.

  I've watched more tutorials and am rebuiding the site, trying to clean up the code and the site.

  I have a number of questions and issues that I have not been able to solve on my own and so I turn to this site.  I'll post a few initial questions here and even more in the following days.

  I sincerely appreciate the time and help you would be willing to offer.

  1. when I try to preview in Firefox, my computer switches to Firefox, but the site is not displayed.  All that appears is what was the last page I looked at Firefox.  This does not happen for Safari, Opera, etc..

  2 I watched videos on the site, built the site largely with a layout of the Tables and then a page turns with the Table in a template for the pages that follow.  I guess it's a frequently asked question: most people set out sites this way to make... or with the ApDiv?  I feel I'm learning a foreign language by the book... now I wondering how people REALLY speak.  My site is www.tomgriggs.net (look at the code at your own risk).  I provided that in the hope that, if you take a look, you might see a way to layout would work for me better than the other.

  3. What is recommend for my table, wide... I'm focusing on the photogarphers and others who usually have large screens and I want to maximize the space I have for my pictures, but I also want to most people when they visit my site to get the site on their screen.  The solution would only be a percentage based tabular presentation?

  I'll save the other for another day or post questions.  I appreciate any response you have!

  1. There is a known issue with Firefox 3.6.x and preview based on the browser.  It is noted in the Mozilla bug database and has been approved for publication in the next version.  I got the bug number in an old post, but I don't know off the top of my head.

  2 tables are a deprecated feature in Dreamweaver and have been removed from CS4.  So I recommend against learning in this way.  Œuvres of absolute positioning for some cases, but if you want a layout pass little matter that someone has the resolution you will end up with an elastic layout using percentages.  You can use div tags PA in it to achieve some effects.  But most of the time it should be used in some sort of container because otherwise your site will have different appearances according to the resolution.

  That your site is concerned, many will run your site through a validator: http://validator.w3.org/ - HTML, http://jigsaw.w3.org/css-validator/ - CSS.  At the moment your site validates 100% with CSS and has only a single error in HTML format (other errors are related).  Your "and must end with a ' / > '."  Apart from that, everything is in order.  Personally, I like the simplicity of your Web site, although I think you could add a little more to the grey background by integrating one of your images in the background.

  3. return to the table.  Closer look at your code and I see that you have a table around your content with a width of 1134.  Personally I trash and follow these steps:

  Here, all the power to the table remains

  If you get away from the table and move to div and layers, so you can make your more elastic page mentioned in the #2 response.  This code inside the body tag would give you a width of 90% of the visible area and auto margin: 0 would set the margin at the top and bottom of the page to 0 while the auto Center the page horizontally in the window of the browser.  As stated previously, layout tables are obsolete and will be not available in the latest versions of DW from CS4.  So I highly recommend moving ahead of them if you can.  The following resource is a good starting point for CSS ( http://www.w3schools.com/css/ ).  Think about the design of web sites in this way, just said HTML what should appear, CSS says what it should look like when it appears. Based on your current layout, it wouldn't be hard to reproduce this with fewer lines of code using basic CSS layout compared to the current table layout.  If you need an example, I could try to stick something together.  It may take a few days if.

  And if you have any other questions, feel free to post them.   Most of the users here are more than willing to lend a hand.

• Some problems and questions about StorE TV

  Hello! I bought stor.e tv a week ago and there are a number of issues, in order of personal importance:

  1. it slows down audio playback. It happens when the standard reading mp.3s on my stereo via the analog output - my music sounds weird, slow and with a reduced frequency. I have to go back change, the exit HDMI (normal speed part, no problem), then change new analog, navigate through folders to find the song I want to play and replay - voila, it works normally. Altogether in a complex way to play a song correctly, you do not?
  2. when there are ID tags (especially album covers) to the songs it takes forever to go from one song to the next.
  3 audio settings are often forgotten after the device has been stopped normally remote control only - you turn it on again and is not how I left it, but back to HDMI. So, I recall at any time check the settings before playing a song? Even if, in a tortuous path, that ^ s have useful to the problem of the mind 1.
  4. do not display correctly Cyrillic subtitles.
  5 pretty hot.
  There are other things, too (no playlists, not slow, slow to develop, etc.). I'm actually writing than just before you go back to the shop and ask for my money back.

  Bravo, guys!

  Hello

  > 4. Does not display correctly Cyrillic subtitles.
  Yes, has been mentioned in other threads seems that not all the subtitles are supported.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=51945

  With regard to other issues.
  I think that you should try to reset the store default TV E again and should check how it works.
  In many cases, it helps to solve these annoying problems.

  Welcome them

• Suggestions and Questions about the upgrade my Hardrive Mac and Ram.

  Hi This is my first time asking something in the forums. (At least I think) Well anyway, I got the Macbook Pro Mid 2012 13 "with the retina also runs the OS El captain. I do computer for school and sometimes animation video editing and ive noticed some performance as my projects get bigger and bigger issues. I want to improve my mac, but I'm not very tech savy and don't want to do something useless, so I had a few questions, I wanted to ask you.

  Do I need for my hard drive and my Ram?

  What effect will the upgrade of my Ram and what effect will be upgrading my hard drive with an SSD?

  I saw this SSD online and thought of novice opion that sounds get Id more bang for my buck (link) with her. Is this good? What more to kill? WiIll it still works? Could you suggest some other good affordable options?

  My next question if I decide to upgrade my Ram can provide you with some good affordable links to buy of new RAM sticks, is also 8 GB, the best he can do?

  My next question I watched a few videos online and by installing the updates level looks really easy and fast. But I use bootcamp (to play games sometimes), and I wanted to know if I save my files on my drive as ive seen people do videos, (something to wipe the drive and put it back in after installing updates) will be I lose my windows 7, I lost the disc to reinstall and he check so I really want to buy a new also do not want to lose the things I put in memory.

  From the retina MacBooks you is impossible to pass the ram as it is soldered to the logic board. As with the hard drive, it's just a card ssd and you can't get those anywhere because their hard to find.

• Question about wireless, routers and network adapters... hope is the right place for the?

  I have a modem to my cable service and I was told that I could network 4 (3 desktop computers and 1 laptop) computers. I plugged the modem, I plugged the router up... i put in the disc of the cable operator to make the wireless network and it does not connect them for some reason any. the cable service representative didn't tell me, I would need something more, but would need one of these network adapters wireless that goes into the USB port on the back? the computer on which the modem is hung up works fine... it's one of those self install the things I told them that I'd rather have a tech cling to me but they insisted that I could do... (obviously any fool can do, I'm not a fool... I'm just stupid! lol "title =" Smiley Tongue"/ > can someone just tell me if I would need one of the cards or y at - it a way to tell if my computers are ready for the wireless... I have 2 dimension E310 XP media center copmputers... is tehre a way to check whether she would need the adapter or not... hope I explained everything properly...) Thank you bunches! antkaki [renee]

  third time to post my question, don't know why it is being deleted... someone can let me know?  Thanks again

  
  

• reclassification of jinitiator in SUN JRE and question about Workflow

  I have a couple of questions really related to the workflow, then maybe wrong forum, but I'll start here.
  I'm upgrading of our 11.5.10.2 configuration to use jinitiator to SUN JRE and have a few questions.
  
  1. one of the patches I must apply '3865683' a ' step 11, run the program simultaneous Workflow Directory service Validation user/role. (Required) ".
  -problem is I don't know much about WF and don't really know what that means or what options to provide
  
  2. in my Test environment, which is a clone of Prod my shippers Notification and Service components are falling and yet once, I work in the how to correct this.
  I don't know if it's the result of my clone process or the upgrade steps that I lived to reach from jinitiator SUN JRE.
  So my concern is when I do this prod if it interrupts the flow of work or if it is simply due to the clone process.
  
  Any comment is appreciated.

  Hello

  The simple answer and support is 'no '. 6863618 patch is a patch of request (must be applied using adpatch), and it will update the files of application/database layer, in order to restore the database files only is not enough because it would make your incompatible application with the database.

  Thank you
  Hussein

• Comments and questions about the mixture ADF Page flows with Trinidad UI

  Hi all
  
  I did a few tests to see how possible it is to use Trinity to the UI (for compatibility of this stinking IE 6) as well as the ADF Page flows / controller of the ADF. My question is whether there is a sustainable configuration from the point of view of Oracle. I did things to make it work and noted the following interesting behaviors (call anaomalies, if you wish):
  
  (1) addition of ADF Page Flow within the reach of the technology for a project automatically adds ADF Faces. If I try to eliminate ADF Faces of the scope of technology, it automatically deletes the flow of Page of ADF as well.
  
  (2) if I remove the ADF Faces DURATION 11 project library and create a page of trinidad (also set up the renderkit and as appropriate skin and remove a moment-false ServletADFFilter of web.xml) I get errors MDS when running the resulting page. I can't correct the error by removing the MDS libraries either - as soon as I put ADF Faces DURATION 11 library back, things are OK.
  
  (3) since I've faced ADF in my scope of technology, all newly created JSPX pages end up having af:document / af:form tags and have the namespaces implemented for ADF Faces. Not useful if I want only parts of Trinidad, but not a show-stopper, either.
  
  (4) an interesting thing that I have reported before... If I have the ADF Page library flow into my project and then configure navigation case in faces-config. XML (I know, wouldn't do that, just an observation, even if someone who has accidentally library ADF Page Flow in their project without any intention to use the ADF Page flows will find this very annoying to debug...), the first click of button that leads to the navigation works very well. All subsequent navigation requires two clicks on the link/button to trigger navigation. This behavior does not occur if you change the case of navigation to redirect = true.
  
  So, in summary, I seems to be the controller of flow/ADF Page ADF working with Trinidad, with a few minor problems of productivity due to an obvious requirement to have the Library Runtime of ADF Faces and the extent of technology ADF Faces included in my project. Now Oracle - is this going to be a sustainable configuration?
  
  I'd also appreciate comments, suggestions and comments from anyone else who has tried or is trying to use the ADF Page flows / ADF controller with a single user Trinity interface (well, in my case, I'm going to blur more using the tag af:template with components of the Trinity, but it's another whole story).
  
  Best,
  
  John
  
  bump #2

  + 1). Adding the ADF Page Flow within the reach of the technology for a project automatically adds ADF Faces. If I try to eliminate ADF Faces of the scope of technology, it automatically deletes the flow of Page of ADF as well. +

  ADF task flows have to ADF Faces e around. Not sure this is documented somewhere, but I hope it's

  (2) no idea about it

  + 3). Since that I've faced ADF in my scope of technology, all newly created JSPX pages end up having af:document / af:form tags and have the namespaces implemented for ADF Faces. Not useful if I want only parts of Trinidad, but not a show-stopper, either. +

  Looks like that is facing an emergency room to have an option in the dialog creation page if create an ADF or page of Trinidad. I'll take a note

  + 4). An interesting thing that I have reported before... If I have the ADF Page library flow into my project and then configure navigation case in faces-config. XML (I know, wouldn't do that, just an observation, even if someone who has accidentally library ADF Page Flow in their project without any intention to use the ADF Page flows will find this very annoying to debug...), the first click of button that leads to the navigation works very well. All subsequent navigation requires two clicks on the button/link to trigger navigation. This behavior does not occur if you change the case of navigation to redirect = true. +

  I'm not sure how to restrict we are on the "do not use" them in combination, but to me this looks like a bug.

  Frank

• file txt and questions about conspiring field

  Hello everyone, I'm trying to plot a graph xy of a txt file and I am having some problems. I enclose the program and and the txt file, I'm getting, don't forget it's prety base, can someone tell me what is the problem? Also more information on trace would be useful as well, for example I can plot from a machine in time real (I enclose also a file to use for communication with the machine) also is there a way to delete a line that is not in the top of the file? Thanks in advance

  Reading data from the field

  1. your file uses two spaces as the delimited.  Change that to be a tab.

  2. you need to index on COLUM, not the line.

  DAS

  1 write the file inside the loop.  Be sure to open/create the file before the loop and close the file after the loop.  This will allow you to eliminate the shift register and you save a lot of memory.

  2. If you want to plot the data, I recommend using a graph.  In this way, you have just to the wire in the last value once you converted to digital.

• Windows 7 slow login / delay authentication question user wireless via ACS 5.8

  Just set up a new ACS 5.8 farm (only 2 servers) here and which I hope someone here can shed light on the difficulties.

  The new ACS server is set up to correctly authenticate administration network device and I am currently working on the definition of profiles for our wireless users authentication and business laptops.

  Being new to this version of ACS (we will migrate manually ACS 4) I followed an excellent example of this task described in a video on this site: http://www.labminutes.com/sec0044_ise_1_1_wireless_dot1x_machine_auth_peap

  I managed to have a Windows XP sp3 client authenticate properly, first with the authentication of the computer, then the authentication of users... and the domain logon process takes place in a short period of time< 1min="" and="" the="" user="" gets="" all="" their="" networked="" drives="" via="" the="" domain="" login="">

  However, I'm fighting to get our Windows 7 clients to authenticate properly.  It seems that the machine authentication does not work as expected (I can ping the laptop test from another machine on the network while the test machine is sitting at the login screen; and I see Authentication host recorded in the papers of authentication Radius ACS).  But, when a domain user logs in with his credentials, the connection process takes 4-5 minutes before an event to authenticate the user is entered in the register authentication Radius ACS, after which the login process completes, except that the domain logon script does not work and the user does not receive the drive mappings.

  Can someone point me in the right direction here?  I would be grateful any entry on this.

  Thanks in advance,

  John

  I had a similar problem with Wireless 802.1 x Win 7 clients unable to connect unless they had cached credentials of the AD.  Authenticate in the machine, but the user would take a lot of time if the Windows credentials have been cached.

  I could solve the problem by expanding the ACL of the air space used during the user authentication to include all DC in the environment.

• iOS 7 and DPS v25 and Question about v28

  Hi, I got an e-mail titled ""upgrade Adobe DPS apps in anticipation of iOS7 " "

  And he says " Exit 24 and earlier viewers have exposed problems on iOS7.

  Q1 - our live Viewer on the Apple booth is based on v25, does that mean that v25 far works very well on ios 7?

  Q2 - we do not expect to upgrade, but instead of upgrade to v27, we prefer to wait and upgrade to v28 saves time and effort, we ok with that?

  Q3 - v28 would include enhanced notification and support for android mobile?

  Please notify.
  

  
  

  Q1: v25 is fine, it was just v24 which shows some issues on iOS7.

  Q2: That's fine.

  Q3: No.

  Neil