SP6000 need good memory specifications

Hello
I just brought a SP6000 without memory. I tried a piece of memory of 128 MB pc100 144 pin and a piece of memory of 64 MB pc100 144 pin in the slot A and slot B on the motherboard (different locations and at different times) but when I turn it on it gives a long beep and then one short beep after watching this, the type of memory bad. I wonder if someone could tell me what the correct specification for this model.
Thank you very much
Roger

Hello

These modules, you must:
PC133 512 MB (PA3108U - 1 M 51)
PC133 256 MB (PA3086U - 1 M 25)
PC133 128 MB (PA3085U - 1 M 12)

In addition you can upgrade memory to 1024 MB max

Tags: Toshiba

Similar Questions

  • I need a memory stick for my trv520 camcorder. Nothing great. Small capacity is good.

    I need a memory stick for my Sony trv520 camcorder.  I would like to take advantage of this feature to camcorders. I've never had the memory stick since.

    Please email if you can help me.  I tried everywhere wherever I can think.

    [email protected]

    Hello and welcome to the community of Sony.
    Thank you for your message.

    You can use a 32 MB or 64 MB or 128 MB Memory Stick with the camcorder.
    However, a 32 MB PSP Memory Stick can also be used.

    See the following link for compatible cards Memory Sticks with the camcorder.
    http://eSupport.Sony.com/us/Perl/support-info.pl?&info_id=11&MDL=DCRTRV520

    Thank you.

  • What is a good memory for Satellite 1400?

    IM struggling to find good memory of your laptop. I hope that it is in the right part of the forum, it is a S1400 but will have no chance of finding the right pair and wants to be 100% sure before.

    I tried crucial memory and system there scan and still has not returned a bit of luck, any help will be good thanks.

    Hello

    Satellite 1400 uses just 144-Pin PC133 SODIMM memory modules.
    You can upgrade the memory up to 1 GB (2 x 512 MB) max

  • My current osx is the version 10.5.8.  I read the posts on this site advises users to buy 10.6 and then upgrade more far away. Since I was only 1 GB of memory, do I need additional memory installed first? Is this possible? Thanks for any help!

    I explore what I need to do to upgrade my imac. My current OS is x version 10.5.8.  I read the posts on this site advises users to buy 10.6 (Snow leopard) and then upgrade more far away. Since I was only 1 GB of memory, do I need additional memory installed first? Is this possible?  I have an Intel Core 2 Duo 2 GHz processor and 1 GB of memory. My Info says memory I have 1 Bank empty. Thanks for any help!

    You need to install more RAM before moving to Snow Leopard and need to do before moving to Lion or newer. Buy it from a source OWC or Crucial.

    (138456)

  • Good memory RAM for Aspire 5736Z-4460?

    I'm looking to find good memory DDR3 RAM for an Aspire 5736z-4460. I bought it used and am unsure of what the PC3 - 12800 s is correct. I don't know that it is PC3 or DDR3.

    Thank you!


  • What I have to do, I can send and save my pictures?  Do I need an application specific jpeg?

    What do I need send and save my photos in contact photo adobe?  Do I need an application specific jpeg?

    You need a specific application. As soon you have saved your document (-up arrow to the left) you can find the share options - see my attached screenshot

  • Need good book on spring

    I need good book to learn more about the Spring framework. I want to learn how to create web applications from scratch using spring. Anyone know a good book on spring for beginner? I tried the recipe for spring, but I think that's not a type of "rollover" of the book. Thank you

    801264 wrote:
    I think to integrate GWT for the UI, Spring and Hibernate finally to access the data. Is this a good combination for business application?

    It all depends on how you define "good combination". Yes, who can work without a doubt.

    Everybody to share their experience with the frames of their choice? Thank you

    There are so many executives and developers out there it's like asking people what their favorite color and why... also people do not always get to choose their frames.

    But of course, I can give you some info: do not use Struts 1.

  • What is the good memory of 2 GB for my Areca ARC-1880ix

    Hello

    My Areca ARC-1880ix came with 1 GB of memory onboard.   I can't upgrade to 4 GB of memory.  But I'm just upgrading it 2 GB of memory, replace the key of 1 GB to 2 GB memory.

    I want to double check to make sure that the new memory is "compatible".  One of the reasons why I'm checking although it seems that the stick indeed fits within the Council, the stick is not too 'high' as the original memory stick.

    I guess that I'm being too cautious. I guess I could just the memory stick in the card and see if it explodes.  But I tell myself that I would run the sticks by experts here.

    See the attached photo of the two sticks, side by side. BTW, the upward alignment slots...

    The memory stick supplied with the card has these specifications:

    UNIGEN
    UG 12T7200M8DR-8CR

    1 GB DDR2 800 240PIN RDIMMS

    1116 ME75TDM80018CUEKRS

    The memory I bought is 2 GB and here are the specs:

    Kingston

    9905429 028.NATALIA AOOLF

    KTD-DM8400A / 2G

    1.8V

    0000005468831

    Specifically, this stick:

    http://www.Amazon.com/GP/product/B000ACZC9C

    Product features and technical details

    Characteristics of the product

    • Includes a module to 2 GB of 533 MHz DDR2 Desktop for Dell
    • Replaces Dell A0515351, corresponds to the size 4700C, xps gen 5, e520, optiplex 210l, 740, 745, gx280, gx520, gx620, gx745, sx280,.
    • Memory designed, manufactured and tested to the specifications of each particular brand computer system
    • The leader of the industry in the PC memory
    • type of DIMM 240-pin
    • Station work Precision 380 390 and xps 600 700 710

    Technical details

    • Model: KTD-DM8400A/2 G
    • Item package quantity: 1
    • Platform: PC
    • Memory RAM technology: DRAM, DDR2 SDRAM
    • Form factor: DIMM 240-pin
    • Memory storage capacity: 2 GB
    • Memory speed: 533 MHz
    • Memory specification compliance: PC2-4200
    • Warranty: limited lifetime warranty
    • Equivalent OEM part number: DELL A0515351


    big and small.jpg

    Rowby,

    This is probably the module you are looking for:

    Kingston ValueRAM KVR800D2E5 / 2G

  • Need good drivers for Satellite C660D-1GJ

    Hello!

    I have this laptop Satellite C660D-1GJ (PSC20E-01200SHU) and I need the GOOD DRIVERS (or Driver pack) for the original Windows 7 x 64, because I can download from the Toshiba site is unusable and it works not!
    (Display, problem, problem of Bluetooth, wireless, etc...)

    Please send me the 1.5 update BIOS too, because I tried to upgrade to 1.6 What is sucessed, but my laptop is terrible now.

    Thank you!

    >... and I need the DRIVERS
    You really thing on Toshiba drivers download page of not correct?
    The proposed pilots are the same used in the Toshiba recovery image and included in the preinstalled operating system.

    I can see in the specifications of the laptop your laptop was offered without OS preinstalled, right?

    I think you're doing something wrong, then maybe you should install OS again with our help. What is wrong with display, BT or wireless?

  • DB face memory pressure and need more memory?


    Hi all

    DB: 10g and 11g

    Need your advice.

    We provide the server db use memory and cpu management report on monthly basis.

    Average usage of memory the server is more or less the same each month that memory allocated to oracle is capped (for example, memory_target).

    Therefore, we will not be able to tell if the memory allocated to the sufficient DB and when does more memory?

    We are required to provide a usage report to show that the memory allocated to the database itself is enough on monthly basis and does not need to bulk up.

    Is there a good way to provde this?

    Our DBs are all OLTP and rarely do full scan.

    First thought to provide the trend of BHCR (above 90%, this means memory is sufficient). Read a large number of documents that BHCR is no longer useful.

    A better way to do it? Kindly share your experiences.

    Thank you

    You can keep in mind what the different parts of the memory.  The SGA is a shared resource, which includes the areas of code and data, and even those who can interleave in pressure of circumstances.  The PGA is determined by the use of the users.  The trend of the latest versions of Oracle is spending more major requests for data at the PGA, but which cannot affect you much if you're like really OLTP, as you describe (which one silent report or batch could blow).  So really, after getting the right CMS, the PGA is more likely to be affected by the increase in the number of users.  Mechanisms of the target to be fairly stable systems (as well as assignments of similar resources carried out by reasonable operating systems) translated well enough glancing SGA and PGA advice and after it.

    Using the resources on a system close to their means of amount maximum, there are times when performance will go downhill fast, simply because of a resource to bite.  (For a good time in mathematics, see the white paper to think clearly on Cary Millsap's performance.)  These types of problems can come from many sources, if a regime change, hardware malfunction or a simple increase in its attendance.  Those who dance near the line will inevitably have to step on it, or some such maxim comes from jurisprudence.

    So the desire of the management of the Non-becassine-hunt is to anticipate and avoid such problems without too much purchase hardware or compulsive, disorder of tuning.  The idea is to make an analysis of trends which allows to predict that an increase in its attendance will make things down a steeply, to do what is necessary to avoid it (or at least expects).

    Oracle has a report to do this?  Not really.  There are too many variables and too many ways to use and abuse a system.  Most performance problems are SQL issues.

    What you can do is to simulate accurately the workload on a test system, increasing its failure.  This as an exercise in iterative parameterization can give a good idea of what settings are required in order to maximize what you can use and an idea what kind of use will start demanding more material.  For a well designed system, it can be as simple as looking at the number of users and uses of the pga.

  • For TimesTen DB and cached memory specifications

    Hi team,
    What are the specifications of memory for the two TimesTen database and in-memory Cache?

    Can be installed in the machine (OS) where the server application or database runs Oracle is running?

    Thanks in advance.

    Best regards
    Marti Papinni

    You must:

    1. decide what data/tables you want to cache in the IMDB Cache and what type of caching you want to use (read ONLY, direct writing, etc.).

    2 create IMDB Cache cache need groups and, as appropriate, to preload data Oracle DB (LOAD CACHE GROUP etc.)

    3 point WLS datasource to FAS TimesTen and/or appropriate DB Oracle based on the data, the application needs to access.

    4. ensure that the application works fine with TimesTen hiding in terms of consistency of application, transactional consistency etc. (since you have now two separate data being synchronized by the mechanisms of cache TimesTen databases).

    Chris

  • The good hardware specification to run ESXi

    I have plan to run about 2 DCs and 4 servers on a single VMWare ESXi 3.5 or 4 Exchange and use the local storage and not SAN for our software development department.

    What would be a good spec for the material of their performance?  I know that it depends on how it will be used, number of users, etc, but I'm looking for a more general recommendation based on your experiences.

    The processor type, the number of processors and amount of memory.

    I looked at DELL PE 2950 with the following specifications:

    -2 x Quad Core Intel Xeon X 5355 2x4MB Cache, 2.66 GHz, 1333 MHz FSB

    -16 GB of memory

    -2 x SAS HD 10 K rpm 200 (use as Raid1)

    And if there is a big difference in performance running Exchange 03/07 on a VMWare ESXi vs physical?

    This DELL poweredge2950 will be fine.

    I just came across this whitepaper http://www.vmware.com/files/pdf/vsphere_perf_exchange-storage-protocols.pdf

    It is perhaps of no use to you

    Arnim - van Lieshout

    -

  • M91 need card mother specifications

    I looked and looked, even called the technical support from Lenovo, and nobody seems to be no sheets on the motherboard M91. The motherboard was MADE by Lenovo! How is it that they have ZERO info on their OWN products? This my Lenovo, he meets! You sorely test my faith on your behalf!

    Interesting. Such things began to happen after Lenovo took over. Yes, much of the information on their Web site is incorrect, but there are solutions. B3U type is identical to your machine with the exception of an additional hard drive, you can use this type of model to download your drivers. Go HERE and download the PSRef of current Thinkcentre desktops, your model is listed on page 91. Seems to be your particular model has slipped through the cracks at Lenovo.

    What features are you looking for? OEMs are cunning on release too much information on their products. PS/Ref is all there is, other than the specifications detailed online which is pretty much the same information in a different format. I also watch the .txt file BIOs of clues about the updates on the latest processors or memory, but your machine is so new he probably don't have not been updated like that, so far.

  • HP Pavilion Slimline (HP s5000: I need more memory on my s5000 HP (HP s5710f))

    I have had this machine for about 4 years and am currently running out of memory when in common applications such as Facebook.  The machine has 3 GB of memory on the motherboard that contains only 3 memory locations.  The maximum memory seems to be only 4 GB.

    I need advice on what I should do next?  Analysis the new tablets in Office Depot I learned that most of them have about 12 GB of memory.  I suppost I shouldn't really that much but I would like to have at least 8 to 10 GB of main memory.  I can't do it on my current motherboard.  Is it better to just get a new machine or if I could install another motherboard that would be both mount my current box but also have enough connectors memory to support a higher total memory.

    Thanks in advance for your help on this problem.

    Hello

    If it's your PC S5710f, then there are only two available memory locations.  If you look at the specs of your PC, you will see that you can install two 4 GB DIMMS to bring the total memory up to 8 GB which works very well with the 64 bit OS in your PC.

    If you want to increase the memory of your PC then buy two DIMMS to 4 GB corresponding to one of the following manufacturers.

    The best way to avoid problems is to contact one of the major manufacturers of memory such as Kingston, Corsair and Crucial and use their tools of memory, then followed by a call to technical support to ensure that you have selected the DIMM that is appropriate for your PC. When you buy directly from the manufacturer, then they will remain behind the product to ensure compatibility.

  • Acer Aspire Z3-605-UR20 Memory Specifications

    I recently bought an Acer Aspire Z3-605-UR20. Online data sheet says I can go to 16 GB of memory. I'm having a hard time to determine the exact type of memory compatible with my machine. Can someone help me to limit?

    Hi eschenbacher!

    Download & install Crucial Scanner . This program will tell you exactly what RAM you need and make recommendations for you.

    The link is to the site of the United Kingdom, but you can put your country by clicking on the flag in the upper left corner of the page.

    I hope this helps!

Maybe you are looking for

  • I get a white screen when I try to sign out of hotmail and he signed nothing happens.

    I can read and send everything very well. Just will not close the session. I have 3 active cookies.

  • Buy recovery CD, from where?

    Hello Somehow I lost the recovery partition. I would like to buy recovery CD or get the Windows operating system CD, because I still have the product key. My laptop is out of warranty, so can I still buy them somewhere? Or I have to buy a new OS? Tha

  • How to write the script vb for both nodes in Windows Server 2003?

    I want to run vb script in windows server 2003.i have two nodes with two separate storage. MCE has been done in two storage. When another failure of a node node will get the storage and then run smoothly. But I did it manually. I want to do this role

  • Halo 2 for Windows Vista

    I am running Windows Vista Business and I can't get the Halo 2 for Windows Vista application runs. It can install it fine, but when I try to run the halo2.exe application, it does nothing. Help me please :D

  • BEFSX41 - gateway to gateway OK, but no remote desktop?

    Hello First of all, I have searched these forums and elsewhere, but have not found anything specific to my situation. Here is my configuration: Linksys BEFSX41 with a Tunnel from gateway to gateway put in place for a Netgear FVG318.  VPN tunnel, grea