Sparse WRT160Nv3 and extremely reliable! Any advice?

Similar Questions

• Someone else has Apple Airplay jumping and drop outs when streaming music?  WiFi is not the problem, and there is nothing around the units of airtime to interference.  Impossible to listen to music.  Thanks for any advice.

  I've recently updated several broadcasts in my house from V1 to V2 in the hope of resolving a constant jumping and abandonment problem I always had when playing music with Airplay.  I have a unit of airtime plugged directly on my stereo receiver that feeds music throughout my house.  My WiFi connection is not the problem and there is nothing to cause interference.  Airplay modules are not more than 15 feet distance modem or range Extenders.  Someone else has this problem and, hopefully, a solution?   I'm tired of doing factory reset all the time.  Many thanks for any advice.

  I've recently updated several broadcasts in my house from V1 to V2 in the hope of resolving a constant jumping and abandonment problem I always had when playing music with Airplay.

  By "Airplays" what are you actually refers to... Base station airPort Express, Apple TV, or something else?

  ... and "V1 to V2" do you mean you replaced a 1st generation 802.11n AirPort Express with a 2nd generation?

  Airplay modules are not more than 15 feet distance modem or range Extenders.

  When steaming audio with AirPlay, the flow goes first to the device host to iTunes to the router Wi - Fi, this unit is connected to. From there, he will travel to the AirPlay "speaker". A president could be an AirPort Express, Apple TV or an AirPlay device ready another manufacturer. If you use line extensions, the flow must go through those as well... so there is potential bottlenecks between the host and the speaker. One of these could be the cause of the issue you found.

• My iphoto does not open. When I click on the circle still turns but nothing happens. I tried to open it with option to order and reconstruction, and nothing happened. I have version 9.2.3. Any advice will be greatly appreciated.

  My iphoto does not open. When I click on the circle still turns but nothing happens. I tried to open it with command + option and reconstruction and nothing happened. I have version 9.2.3. Any advice will be greatly appreciated.

  If you recently updated to El Capitan, your version of iPhoto is not compatible with this OS.

  What version of Mac OS X are you running?

• When I print a table (multiple pages) the text box under the table seems to be moving under the table and prints with the table of this overlap. My only solution is to push the text box further down the page before printing... Any advice?

  Im having problems shaped a text box so that my table does not print right on top of it. I want it inside of my table (it's 'tems and conditions' budget)

  Any advice would be great.

  I face the same problem as well. Would like to know if there is a better way to get the text box to move with the table instead of the effect that overlap. Have to manually adjust the layout, whenever I want to get a reasonable print of a document (or export it to PDF) seems counterintuitive, especially when it causes the document seem ill-disposed on screen.

  I am running version 3.6.2 of the numbers in the case where that matters.

• Paper settings shows only the leaves and the CD/DVD.  No roll paper option is listed.  Any advice?

  Paper settings shows only the leaves and the CD/DVD.  No roll paper option is listed.  Any advice?

  Hi Bcoo,

  Provided paper settings options is by the printer driver. I would ask you to update or reinstall the printer driver.

  If you are still not able to see the option, contact the manufacturer of your printer.

  I hope this helps.

  ~ UL

• I'm new to Lr, can someone tell me if there is a limit of size PRACTICE to a Lightroom catalog file? Should I keep the file size within a certain range of size of GB and then create a new? Thank you I would be grateful of any advice.

  I'm new to Lr, can someone tell me if there is a limit of size PRACTICE to a Lightroom catalog file? Should I keep the file size within a certain range of size of GB and then create a new? Thank you I would be grateful of any advice.

  He has no such limit, and in fact some users in this domain and other forums report catalogues over 1/2 million pictures works well.

  The idea to create multiple catalogs because you don't want to get too big catalog file size is a bad idea that you should never think of it again.

• Time capsule and extreme; Cannot create the roaming network

  Problem: when you try to create a network roaming with time capsule and extreme, the wifi hangs and the network is up and down. Here are my deets:

  TC and extreme as well have the latest firmware of the 7.7.7 are the latest generation of products, purchased in the last 12 months

  TC is connected to Arris SB6183

  ISP is Cox North san diego County

  TC is then connected to the netgear GS105. (upstairs)

  NETGEAR GS105 then connects to GS108 (down in the patch panel in the closet of the master bedroom)

  1 x GS108 port connects to extreme

  I can get the stable network and works correctly as long as I don't have connected and extreme.

  I followed the instructions provided by apple in their "how to set up a roaming network.

  I have hard reset the devices apple repeatedly in my attempt to get things to work

  I started a Wan shortly ago at the connected WiFi and that was stable and work for not more than 30 minutes and then it went offline.

  So here I am now. Unable to get back online and stable with two apple devices connected network.

  System was stable and working well before the upgrade to 7.7.7. I had a wifi connected network not a roaming network at the time.

  Any suggestion would be great and really appreciated.

  Thank you

  After screenshots of the TC and AE installing airport utility.

  I suspect that you simply have something set wrong...

  Main error is to use extend wireless when it is connected by ethernet... This will create a loop and bring down the network.

  The two units must be defined to create a wireless network... both must use the same name (SSID) and the same password, but must be set to different channels.

  It is almost impossible in this case crashing the network since the two are completely independent Wireless Access Points... (WAP).

  The TC must be in router mode... EI must be in the bridge (bridge mode off on the network tab.)

• Submit an RSS feed to itunes, but I keep getting a message saying 'cannot submit your feed. There is no description tag in your diet, or the description tag is empty. "Any advice on how to solve this problem?

  Our podcast is released through Libsyn, who confirmed to me that our RSS feed is valid. I talked to two Libsyn and itunes support or knew what it is I do. Thanks a lot for any advice you may have.

  RSS feed: http://enslavedbythebell.libsyn.com/rss

  I went and tweaked your workflow slightly.

  Try to send back you your feed now.

  Rob W

  libsyn

• Someone at - it encountered problems with the iPhone 6 if weak reception. the phone goes crazy on his own? I have two employees in the SoCal area having this problem. Both have updated to IOS 9.2 to see if that helped. Any advice would be great!

  the phone goes crazy on his own? I have two employees in the SoCal area having this problem. Both have updated to IOS 9.2 and on the Verizon network. Any advice would be great! «The phone cut, connects during a call to Conference of someone else in (the phone chooses who to call), it basically starts random on the phone stock selection as if someone is trying to use it.»  It puts not only calls on mute.  The keyboard for contacts has been absent for a while, but is now back. "That's what they live. We tried to reset hard phones, the last option that we have not yet tried is wipe it off and start over, but I don't see that as a solution, since one is nine and the other is about 6 months with the same problems accurate.

  Hello FergusonChris,

  Thank you for using communities of Apple Support.

  I understand that your business has iPhones whose screens are behaving erratically.  Given your description of the issue, it seems that the screen may be dirty or there is the screen protector/case that interferes with the screen.  To further support this issue, please see the link below.

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  Take care.

• Any advice on dialog control slow path?

  Hello

  I have a trajectory control that gives me LV2010 and WinXP. My VI seems to work very well (it maintains entered analog, etc.) and the rest of the computer seems to work as well (can change windows, manipulate other applications, etc.), however the file dialog box seems to be very slow. It takes about 10 seconds for a click inside the dialog box and select a file. The control works (if I'm patient enough), but very slowly, as if the windows/computer is too busy to handle the file dialog box.

  Any advice concerning the control of trajectory?

  I think what he's referring to is that the loop can be run very fast and slow everything down. Try to put a 50mS delay in the loop and see what happens.

• Install Windows 8 on Windows XP. Any advice?

  I wonder on what experience others have had to install windows 8 and remove windows XP from my computer. I have an IBM IntelliStation M Pro with 2 GB of Ram, processors Intel Duel refurbed. 26 GB of space on the hard drive internal, I think to upgrade my computer at home because of the expense of buying a new computer and have to buy all the software that I'm done again.

  Windows 8 settles on old machines with problems minimum? What an experience someone had done this? Any advice?

  I want to spend more time using some programs such as Sony Vegas Movie Studio, software editing and production of video film. My machine has been able to manage this software in Windows XP SP3 without problem.

  Actxiom

  I know they will say "We couldn't get your programs to transfer through."

  You have this question in all cases.

  You can't do a straight "upgrade" from XP to Windows 8 "»  You would have to do a clean install ("custom Setup") of Windows 8, copy your data (documents, pictures, music, etc.) of a file Windows Easy Transfer or other backup offline and install all your programs from original installation media (CD/DVD/download install file).  Some older programs need new versions... which may or may not be freely available.

  Frankly, Windows 8 is a pretty big jump from an old XP system (and with a hard drive Go 86, your system is probably more than 5 years) and it is likely that you will not be able to find drivers for some of your hardware for Windows 8 and Windows 8 features do not work on your hardware at all.  Windows 8 may, indeed, works on any older hardware.

  On this page: http://windows.microsoft.com/en-us/windows-8/upgrade-to-windows-8

  If I were you - and this is based only on what I've read rather than personal experience - I would try to find a new computer with Windows 7 pre-installed (rather than Windows 8).  If you really want Windows 8, you should probably get a new computer.  Whatever it is, however, you will have the same problems of re-setup described above (it is not a direct upgrade from XP to Windows 7, either).

  PS: I wouldn't go to Best Buy, either... but it's up to you.

• My laptop that is running windows xp does not recognize the computers on the network running windows 7. Any advice?

  I recently created my home network again.  It consists of a laptop running windows 7 Professional 64 b, b Office windows 7 Professional 32 running and a netbook under windows xp home.  Two computers running windows 7 recognize each other and share correctly, but the netbook will not recognize the other computers on the network at all.  They can see it, but then say they can't access them when you are trying to access.  They are all on the same workgroup.  Computers that run windows 7 discovered the network, file and printer sharing, and public folder sharing all lit.  Password sharing is disabled and windows manages the homegroup connections.  Any advice would be appreciated, I need to use computer dvd players 7 on the network to install some things on the netbook.

  Hi mahmorc,

  ·         You get the error message?

  Follow these methods.

  Method 1: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/308007

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Update the latest drivers for the network card.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• NO access to 1.90 MB 2 GB Sansa M250 Player/Any advice appreciated

  Hello!

  Thank you for reading my question.

  I have a sansa m250 2 GB with reader, but when I put in there songs I can only

  access to 230 MEgabyles!. Once he reached 230 MB, I get an error message that the other songs cannot be copied.

  How can I access the partition with 190 MB?

  Before you copy and paste the pieces inside, I look in 'My computer' and click on 'no' which appears is a completely blank disc. The meter is set to MSC.

  I went from the MTP MSC several times, this caused a problem?

  Also, I reformatted the player sansa several times to address this issue. At I have accidentally delete stuff >

  Before this reformatting when I clicked on 'sansa player' in 'My Computer', there were 2 folders in the folder of the Sansa.

  When I look at the player sansa MSC in computer management it's a sound record of 1.90 GB.

  I formatted the disk by right-clicking on the drive and also via the computer management by clicking on the partition and formatting here.

  Any advice would be greatly appreciated,

  Thank you

  .

  Hi I seemed to have solved my own issued and write the fix.

  I downloaded the update from sansa and followed the instructions and it installs the software/firmware on my sansa m250.

  Then, I had access to more than 203 MB, so it's resolved.

• BlackBerry smartphones, that I can't get my text message notifier change any advice?

  I went in the sounds of change and menu alerts then sounds for the profile selected and changed the notifier of text message. Every other Notifier ringtone and message I changed it (i.e. e-mail) worked well. It is not a huge problem just annoying. Any advice?

  As with some of the other posts, I read that it was a matter of familiarization with the phone. There are two reasons would not work the tone of the text message: 1) number format seems better work when entered 17031234567 rather then have dashes or leaving one offshore. (2) If a person has a personalized ring tone message should be changed, and because I had that each text that I received from someone with a custom ring tone had a tone preset text. I hope this helps someone who had the same problem.

• Adding a new license for a new Member, but may not use programs. Saying licensing issues... any advice?

  Adding a new license for a new Member, but may not use programs. Saying licensing issues... any advice?

  You use the Enterprise Dashboard?

  If so

  1. ensure that they use the correct ID type. So if they have been added to the dashboard with Enterprise or federated ID to ensure they do not use the Adobe ID or vice versa.

  2. bring to sign out and sign back in to check their eligibility.

  3. If the problem persists, then try this:

  The opm.db file contains the login user cached information and delete this file is a useful troubleshooting step. Once deleted a fresh file will be automatically created when you start creative cloud and reconnect.

  1. Close the creative cloud application.
  2. Navigate to the OOBE folder.
     Windows: [system drive]: \Users\ [user name] \AppData\Local\Adobe\OOBE
     Mac OS: /Users/ [user name] / folder/Library/Application Support / Adobe / OOBE
  3. Delete the file opm.db.
  4. Launch the creative cloud.