spawn the dynamic number of incoming clones (PtByPt vi)

Hello

I remember a few years ago, I saw an example of what I'm trying to do now, but I can't find it. I have an idea of which way to go, but I would ask first of all here advanced coders.

Scenario: I need to follow some binary a TCP/IP stream indicators, and a useful VI is the "PtByPt.vi of through Boolean" for this. However, I have a lot of channels I need to monitor the 'rising edge' independently. If I had just a few channels, I could go into the following not too elegant statically (see below, the case of structure must be configured manually for all items).

I know that the solution involves a dynamic technique of appeal VI, but I would like to ask your advice, how to properly and effectively? Thank you very much!

Have you seen this page here? http://zone.NI.com/reference/en-XX/help/371361H-01/lvconcepts/asynchronous_vi_calls/

More specifically, read the last two points - if you open a single reference, then it will run the VI on the way home. If you open the reference several times, it is allocated in advance for each call (reference) should retain its own memory space.

For an example - look at the second diagram at this link: http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/acbr_call_and_collect/

Tags: NI Software

Similar Questions

  • Get the phone number of incoming calls

    Greetings!

    Yes! I read a lot about these subject through this forum, but no solution so far.

    We are trying to retrieve the number of incoming phone currently but ((callId) Phone.getCall or Phone.getActiveCall) are return null, so I'm not able to recover the number, getDisplayPhoneNumber().

    Implementation of the PhoneListener or the AbstractePhoneListener extension the result is the same, as expected.

    Our first objective is Blackberry 8900 v4.6.1.250 (Platform 4.2.0.113), so far without success.

    Does work for sorting?

    Thanks in advance!

    I use this method with success in all kinds of OS versions.

    I would say to start own thread, it may need to wait a little time, but generally a callincoming should already have a call in progress.

    4.6 on the returned string may contain invalid characters (such as '?'), look for these.

  • Several incoming clones with the FGV not reentrant timer

    Hello
    I want to create a launcher of timer. So I created simple timer based on a functional global variable and tried to launch several clones of her home "timer Launcher. The thing is that the timer is not reentrant (each FGV I saw was not reentrant) and I do not know how to create such a pitcher.

    Attached image illustrates the idea. So I throw clone1 (which is some reentrant VI), in this clone I have not reentrant timer but it is not reentrant in the perspective of clone 1 only. Clone 2, I have an another timer that is not reentrant from the point of view of clone 2 incoming but from the point of view of clone 1 and so on. It is quite complicated to describe, but I hope that the photo show my problem somehow.

    Help, please

    You can do this if you make your timer pre-allocate clones-reentrant and then call by reference (a reference in every clone of the Launcher timer so that each Launcher uses a clone of separate timer).

  • Get the number of incoming call to 10.3

    How to print the number of incoming call in a text box, as it is available in the api news for 10.3 os

    This code c ++ will give callerId and will retrieve the name of the contact:

    https://github.com/RodgerLeblanc/caller/BLOB/master/callerService/src/service.cpp

  • ID (CLI of the incoming caller SPA-3102) truncates the last digit when the telephone number is longer.

    Hi team

    Depending on the subject, when the number of the caller is Longer (i.e. International call with Country code etc.) as 11 digits, it truncates the last digit of the incoming phone number. See picture attached. Full number is 60126140235, but he loses the last digit is 5. Any suggestions?

    Also, there are comma (,) before the number that consumes valuable space. How elimiante that?

        

     FXO:Start CNDD fxo cnddwrap_feed parse ok 0060126140 status=2 -- Caller ID: -- Name = (null) -- Remote Number = 0060126140 -- Dialable Number = (null) -- No Number Reason = (null) -- No Name Reason = (null) -- Message Waiting = (null) -- Date and Time = 07/22 18:06 FXO:CNDD name=, number=0060126140 FXO:Stop CNDD FXO:CNDD Name= Phone=0060126140

    According to the newspaper that you have provided, the number of callers number claimed 0060126140.

    Length maximum support of the number in the E.164 format is 12 digits, including the country code. SPA don't know any used number format, so it has no reason to truncate 10-digit - I guess that he supported at LEAST 12 E.164 numbers.

    As the number seems to be broken on the side operators (00 superfluous as prefix, truncated to 10 digits) there's nothing you can to with him on the side SPA. We cannot guess figures sent by the operator to you...

    I can explain what is happening even on the side of the operators (although I'm only guessing) - I guess that we are talking of two digit country code country, so 10 digits is the maximum length of the national number. It seems your operator to consider the number national number and truncate them to 10 numbers on their side.

  • Add number amount and the confirmation to the dynamic stamp?

    Hello and thank you for this forum.

    I managed to create a dynamic, successful stamp may be a bit optimistic, but it's a case of 3 lines and one works.

    This is the image which I created the stamp:

    check_payment.png

    The work of the date line; I removed the timestamp, but mmm dd yyyy work very well. Except that it's not quite what I want to do and I have since learned that once there, it is not editable. I downloaded the API and, like many before me, am overwhelmed!

    What I'm trying to do is to create a stamp in which I can manually enter references in each line. It is to pay a payments then date will always be a few days in advance and, of course, the amount and the confirmation number will also vary. Like this:

    check_payment.example.png

    I tried everything what in fact one form, but of course, when it became a stamp, I couldn't on deposits more.

    I know that I spend a lot more time trying to create this thing I would have if I used the text box (which I am currently) and entered manually each payment for about two years! But having come so far, I'd really like to finish instead.

    So. Two questions, I guess. First of all, it can be done? Second, how?

    Thanks a lot for help.

    -G.

    Yes, it's possible, but it's complicated for a beginner. The best way is to use JavaScript to create a custom dialog box that prompts the user to enter information. It should look like this:

    When the user clicks the OK button, the code in the stamp copy the values of the fields in the dialog box that is customized to the fields in the form on the stamp and the stamp is then applied to the page. When the buffer is applied, fields is flattened and therefor cannot be changed by the user.

    This is what looks like the following:

    The problem is that the creation of a dialog box custom is not simple for beginners to create or simple to explain. This is a book that contains information: http://www.amazon.com/gp/product/B008KODLJ0/

    I would suggest finding someone to create the stamp for you, and you would be able to learn from him.

  • How to run a same sequence number for the dynamic lines resulting

    Hi friends,

    I have a sequence and the trigger (which will trigger the id for each line insertion).

    My scenario is, if I update more than 5 lines of a way of time, I need to define a same example (1) sequence number for all the 5 rows.

    Next time, if I update another way for 5 rows, then I need to define a sequence of the same number (i.e.) 2 for the next 5 lines.

    So my update will be dynamic (can be 2, 5, 10 rows at a time), but I need a same sequence number for one of the column for all of the lines that I'm updating the value.

    Next time, if I update another series of lines means, then I need to put only the next sequence number (i.e) 2 (assume this sequence previously updated to the front of the set of rows is 1) for another set of lines.

    As this sequence should update in a sequential manner for more than a set of rows in this column.

    How friends.

    example of
    id-----------------name
1-------------------A
1-------------------B
1-------------------C
1-------------------D
1-------------------E
2-------------------D
2-------------------E
2-------------------F
2-------------------G
3-------------------H
3-------------------I
    Brgds,
    Mini

    Generate the value of the sequence and store it in a variable and use this variable in the UPDATE.

    varSequence := .nextval;

update  set  = varSequence where

  • APEX 4.0.1: restriction on the maximum number of dynamic actions on a page?

    Hello

    I would like to know if there is a restriction on the number of dynamic actions on a page.
    I have a page with 29 dynamic actions. Everything works fine on the page.
    If I create another dynamic action that display only an alert or nothing else, I have the HTTP 404 error message when I try to view the page.
    If I delete the old dynamic action and create a new one so that the page works fine.
    After several tests, it seems that there is a maximum number of DA on a page, but if someone can confirm that?

    Environment:
    APEX 4.0.1
    Embedded PL/SQL gateway

    Kind regards
    SDDC

    Hi sddc.

    There is no limit on the number of dynamic action that you have on a page, but it is very likely that you hit a size limit of a variable we use during the generation of the JavaScript code for the dynamic actions. You can activate a log more detailed error further details on your 404 error - see http://www.inside-oracle-apex.com/oracle-apex-got-404-not-found-2/ EPG instructions are in the comments.

    BTW, you might be able to reduce the number of you dynamic actions by specifying page several items in the attribute 'Product (s)' from the 'when' the article if all run the same code. Just separate them with a comma (no spaces). Such as: P1_MGR, P1_DEPTNO

    Concerning
    Patrick
    -----------
    My Blog: http://www.inside-oracle-apex.com
    APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
    Twitter: http://www.twitter.com/patrickwolf

  • Dynamic number of columns in the table

    Hello

    I use JDev 10.1.3.3.0 with ADF. I just want to create a table, with a dynamic number of columns in the table. The background is that a user of my webapplication can create and submit a sql query. Now, I have to show him the results. My idea was, I have save the result in a bean managed (ResultTable), which is stored in the session context and map at my table in my page.

    If I search the Forum and don't get only one useful thread: {: identifier of the thread = 971888}, but I don't exactly understand. What is the CollectionModel? Do I need this?

    I'm trying to report on the following:

    ResultTable
    public class ResultTable {

    public static final String SESSION_NAME = "ResultTable";
    private ArrayList<ResultColumn> columnList; 
    private CollectionModel collectionModel;

    public ResultTable() {
    }

    public ArrayList<ResultColumn> getColumnList() {
        return columnList;
    }

    public void setColumnList(ArrayList<ResultColumn> columnList) {
        this.columnList = columnList;
    }
}
    ResultColumn
    public class ResultColumn {
    
    private ArrayList<ResultRow> rowList;
    private String name;

    public ResultColumn() {
    }

    public ArrayList<ResultRow> getRowList() {
        return rowList;
    }

    public void setRowList(ArrayList<ResultRow> rowList) {
        this.rowList = rowList;
    }

    public String getName() {
        return name;
    }

    public void setName(String name) {
        this.name = name;
    }
}
    ResultTable
    public class ResultRow {
    
    private String value;

    public ResultRow() {
    }

    public String getValue() {
        return value;
    }

    public void setValue(String value) {
        this.value = value;
    }
}
    My showResult.jspx
    <af:table emptyText="No items were found"
          value="ResultTable.columnList"
          var="column"
          varStatus="colStatus"
          id="table1">
  <af:forEach items="#{column.rowList}" var="row" varStatus="rowStatus">
    <af:column sortable="false" headerText="#{column.name}" 
               id="column#{colStatus.index}">
      <af:outputText value="#{row.value}"
                     id="outputText#{rowStatus.index}"/>
    </af:column>
  </af:forEach>
</af:table>
    The ResultTable was filled with data, but the Board is not filled. So, I think, it must be rejected to the data binding.

    I get warnings and errors to run too. But I don't know if they are the result or cause of my problem.
    27.10.2009 10:15:41 oracle.adfinternal.view.faces.renderkit.core.xhtml.TableRenderer renderTableWithoutColumns
WARNUNG: Table with id: form1:table1 has no visible columns!
27.10.2009 10:15:41 oracle.adfinternal.view.faces.io.HtmlResponseWriter endElement
SCHWERWIEGEND: Element End name:span does not match start name:div
27.10.2009 10:15:41 oracle.adfinternal.view.faces.io.HtmlResponseWriter endElement
SCHWERWIEGEND: Element End name:span does not match start name:div
27.10.2009 10:15:41 oracle.adfinternal.view.faces.io.HtmlResponseWriter endElement
SCHWERWIEGEND: Element End name:form does not match start name:span
27.10.2009 10:15:41 oracle.adfinternal.view.faces.io.HtmlResponseWriter endElement
SCHWERWIEGEND: Element End name:body does not match start name:form
27.10.2009 10:15:41 oracle.adfinternal.view.faces.io.HtmlResponseWriter endElement
SCHWERWIEGEND: Element End name:html does not match start name:body
    Concerning

    Majo

    Hi Mario,.

    Note that your JSPX snippet above has serious shortcomings:

  • 'ResultTable.rowList' is not an EL expression, but the value attribute of the af: table must refer to an EL expression
  • Items AF:foreach = "#{row.cellList}"-you don't have to store information about the columns of all rows, more it won't work as af:forEach tag may not see the value of the expression of EL #{line} (or any component EL expression created). " See the tagdoc here: http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/jsf/doc/tagdoc/core/forEach.html
  • "ID =" Column #{cellStatus.index} "and id =" outputText #{rowStatus.index} "are invalid and that they don't compile even as id attributes cannot contain EL expressions.

    .

    I think to solve your problem, you need three things:

  • List of columns (for example the list If you need to store only the names of column or list If you need additional information),.
  • list of lines,
  • a line can be a map (with the name of the column - cell data mapping; card e.g.) or a list (with columns indexed; for examplelist).

    Example with the lines of the map:

    JSPX snippet:

    The ResultTable bean:

    public class ResultTable {

    private List columnList;
    private List> rowList; 

    public ResultTable() {
    }

    public List getColumnList() {
        return columnList;
    }

    public void setColumnList(List columnList) {
        this.columnList = columnList;
    }

    public List> getRowList() {
        return rowList;
    }

    public void setColumnList(List> rowList) {
        this.rowList= rowList;
    }

}

    Type ResultColumn:

    public class ResultColumn {

    // additional fields if needed...
    private String name;

    public ResultColumn() {
    }

    public String getName() {
        return name;
    }

    public void setName(String name) {
        this.name = name;
    }
}

    AF:table display correctly after the initialization of the values in your beans properly filled ResultTalbe (e.g. to fill the list of rank with the lines).

    Hope this helps,
    Patrik

  • Error number statup topic = the procedure entry point xml name AppleSyncNotifier.exe text reader const could not be located in the dynamic link libxl2.dll

    Original title: sign of problems

    at the start of my system, I get the following, called = AppleSyncNotifier.exe he then continued to say in the dialog = the procedure entry point xml text reader const name could not be located in the dynamic link libxl2.dll, it prevents me from doing whatever it is on the opening page, anyone help? John

    Hello

    AppleSyncNotifier.exe is part of ITunes. To resolve the issue, try the following methods.

    Method 1:

    I suggest that you download and reinstall ITunes since this link provided below to fix the problem.

    http://www.Apple.com/downloads/

    Method 2:

    You can perform the clean boot in order to eliminate the problem.

    Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note:

    After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    For further assistance, you can get in touch with support for ITunes.

    https://discussions.Apple.com/community/iTunes?CategoryID=149

  • Pneumatic schema / proportionally correct wheel of the dynamic circle

    Hi, I use actionScript to dynamically draw a diagram of a wheel with tire, but it made its appearance the right size. The diagram should be drawn using three pieces of incoming information (from JavaScript):

    num_wd_mm (diameter of the wheel) is the diameter of the metal wheel, which fits the tyre rubber.

    num_ph_mm (height) = the height of inside outside the tire rubber itself.

    num_ODmm (overall diameter) = the diameter of the whole thing (wheel diam + height profile)

    Sounds simple, isn't? But it is difficult to do the math necessary to draw the diagram with precision, because the diameter of the wheel is represented by a full circle and the circle race tire. The width of the line is the circumference of the circle filled with half and half inside the outer edge.

    The key is the correct outline width, while represents the tire rubber with precision, it compensates for the fact that it is only the display outside the circle of half of its width, and he rides inside the circle by half of its width also (fill circle should appear to be is the diameter of the wheel because it's what he represents in the diagram.)

    Here is how I had tried it, but I can see that the overall diameter is wrong:

    / / The scale for the graph is:

    var MMtoPX:Number = 3.5;

    //Set vars for dynamic circle

    var strokeWidth:Number = num_ph_mm/MMtoPX;

    var circleRadius:Number = ((num_ODmm+num_wd_mm)/2) / MMtoPX;

    / / Draw the dynamic circle

    circle.graphics.clear ();

    circle.graphics.lineStyle (strokeWidth, 0x000000);

    circle.graphics.beginFill (0x0000FF);

    circle.graphics.drawCircle (circleX, circleY, circleRadius);

    circle.graphics.endFill ();

    Initially, it seemed that it would be simple, but all combinations possible amounts that I try produces incorrect results.

    In addition to what AHernandezIP, traits are overlapping fills (half of the thickness of line) - it's one of the reasons why is not worth trying to find adequate compensation. If, say, a circle radius is 100 and accident stroke is 20 - combined radius of the circle that results will be 120 (100 + 10 on each side). So, it is much easier to draw two circles. One of the ways:

    var circle:Sprite = new Sprite();
var gr:Graphics = circle.graphics;
var outerRadius:Number = 100;
var innerRadius:Number = 60;
// draw two crcles in one swap
gr.beginFill(0x6C0000);
// draw bigger one
gr.drawCircle(0, 0, outerRadius);
gr.endFill();
// change fill color
gr.beginFill(0xC0C0C0);
// draw smaller circle
gr.drawCircle(0, 0, innerRadius);
gr.endFill();
addChild(circle);
circle.x = circle.y = 100;

  • Time of design and of the dynamically created controls

    I have a project written in VC6 as a project of the MFC dialog box. In a particular area, I dynamically create several (the exact number depends on user input) CNiGraphs. There is also a two CNiButtons that were created at design time using the resource editor. The problem I have is that when this dialog box is open, a message appears saying it is an eval version and the control will go off after 5 minutes. After 5 minutes of waiting, the CNiButtons 2 go inactive (black tower), but the continuous CNiGraphs of work. I have a valid license of MStudio 8.1.6, version but it seems that these 2 buttons do not recognize the license. There are also other buttons from the moment of conception of the project, but these have no problem at all. When you create the dynamic creation of the CNiGraphs, give them a valid license string, and I was wondering if there is a problem with the time created and dynamically controls created in the same dialog box to design. Anyone know?

    I don't remember, but I can have created these 2 CNiButtons when I was with only an eval license. (All others were undoubtedly create when I got a full license) Could have an impact on them? I have a vague memory of reading somewhere that DTC create controls to check the license when they are created in the designer and store that info in them license. If this is the case does anyone know an easy way to update the license stored in control? I rather not just delete it and Add again because I would avoid having to redo the tab order (unless someone knows how to easily insert something in the middle of the order of tab instead of having to click through all the controls in the correct order)?

    In addition, I don't know if this would affect anything, but the project was originally built with ComponentWorks 1.0, we were forced to move to MStudio when we met a few bugs in CW, so all controls were originally CW controls which have been converted into control of CNi. I doubt that this is so like everywhere else, we changed during controls is not a problem, but I'm ready to try the suggestions.

    Hi JC,.

    I hope you had a good weekend!  I'm glad to hear that you're back running.  Add the extra button was, in fact, causing update the licensing information for the other buttons, as you can imagine.  After further research, I found that the license information are stored only the form of the control, and if this control doesn't change in any way (or in your case, adding a new project), he sees no reason when compiling to recreate a link to the license.  However, after the change of control and a new, it updates the link between the license information, which solved this problem in your case.

    I hope this helps, JC.  Have a great day!

  • "the 495 ordinal not found in the dynamic link library urlmon.dll" produces 10 times every reboot

    I am running MS Vista on my laptop. Recently when I start up I get the message "the 495 ordinal not found in the dynamic link library urlmon.dll" in a popup box and must cancel 10 times before I can move forward.

    I thought somehow it may relate to a recent update that has been accepted for Skype on my system.  So I uninstalled Skype.  Attempts to reinstall Skype have failed.  the installed app, but I cannot arrive at a login screen.  Instead of the normal Skype window, I have just the bottom of loading in a web browser.

    I found a similar one but transposed ordinal error discussed 459 in the KB and I tried following many of its steps (+ my results):

    "Method 1:

    To resolve this problem in Internet Explorer, follow these steps:

    a. Quit all programs that are running.

    b. Click Start and then click Run.

    c. type regsvr32 urlmon.dll, and then click OK.

    d. When you receive the message "DllRegisterServer in urlmon.dll succeeded," click OK.

    ('DllRegisterServer in urlmon.dll' received successful)

    If this does not resolve the issue, repeat steps 2 through 4 for each of the following files (in step 3, replace Urlmon.dll with each of the names of files below):

    ·         Shdocvw.dll (failed)

    ·         Actxprxy.dll (failed)

    ·         Oleaut32.dll (failed)

    ·         Mshtml.dll (received no response)

    ·         Browseui.dll (failed)

    ·         Shell32.dll (managed)

    Method (step 2):

    I suggest you to start in safe mode and test the question.

    Safe boot mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

    Method (step 3):

    I suggest you perform a SFC Scan and check if it helps.

    The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.

    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows: http://support.microsoft.com/kb/929833

    (SFC Scan completed successfully)

    Side note: when I started in Mode safe I immediately received an error "Microsoft Visual C++ Runtime library"Application request time to close in an unusual way"

    DavidMCandy suggested the user a list of the URLMON. Dll on the system.  I did as well.  See the file on my Onedrive to

    http://1drv.Ms/11PQ3dm

    I hope this will help you to find me a solution to my problem.

    First of all lets run a startup repair.

    This hardware test (and other things but we want to test the equipment). To do maintenance on the database and the files used by your two frequent falls (related to how windows manages system files including Windows Update). SFC is also linked to this, so we know that certain parts are working.

    After return from the logs generated.

    Startup Repair

    If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support].

    In the Display Options Options Advanced startup, use the arrow keys to highlight repair your computerand press ENTER.

    Select the Startup Repair tool.

    Startup Repair makes a log file. See C:\Windows\System32\LogFiles\Srt\SrtTrail.txt.

    To access if Windows does not start, in the Advanced Boot Options screen, use the arrow keys to select repair your computerand press ENTER.

    Select command prompt.

    Type

    type C:\Windows\System32\LogFiles\Srt\SrtTrail.txt | more

     

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     
    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

  • Error 'the procedure entry point xmlTextReaderConstName' not found in the dynamic link library libxml2.dll when you connect to the computer

    Original title:

    I get this pop-up when I connect: 'the procedure entry point not found xmlTextReaderConstName in the dynamic link library libxml2.dll.'  What should I do to fix this?

    Hello

    1. are you able to connect next to this error?

    2. are you aware of any changes made to the computer, before the show?

    Method 1:

    Step 1: Safe Mode

    Start your computer in safe mode and check the number.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2: Clean boot

    If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: When you have finished the clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

    Method 2:

    Run a SFC system analysis and control for the issue.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 3:

    Follow these steps.

    a. open windows Explorer, navigate to the following location:

    For 64-bit.

    C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

    For 32 bit,

    C:\Program Files \Common Files\Apple\Apple Application Support

    b. copy the file "libxml2.dll.

    c. open new windows Explorer, navigate to the following location:

    For 64-bit.

    C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support

    For 32 bit,

    C:\Program Files \Common Files\Apple\Mobile Device Support

    d. Paste the file 'libxml2.dll' at the location.

    e. restart your computer.

    I hope this helps.

  • Phone info of the device number differs from phone number

    The number which is located in the folder of device information into the Launcher has a different number than my cell phone number. How I found? Someone left me a voicemail so I pressed "1" to retrieve the message. However, my phone (Pixi) dialed a number that wasn't mine. How could it happen? I'm suspect that when my Pixi phone has been replaced at the Sprint store - it froze the second day and Palm support instructed me to return the unit for a new - they gave me a phone that had been used briefly by someone else (although the shop told me it was a new phone).

    So when the Sprint Store copied my data in the 'new' phone (which reproduces about 80 entries of contact), it doesn't have to change the phone number in the input of the unit. The only problem this causes is the speed dial, the call to voicemail. My real phone number appears in the outgoing calls and incoming calls reached my phone.

    I contacted the Palm and Sprint, and both have never run into this problem before. Then they tell me that I have to do a hard reset (groan). If - finally - my question: what happens to my data with a hard reset? I use CompanionLink to sync Contacts and calendar between Outlook and my google account - no problem here?

    What of my apps that I bought the app catalog?

    What of my entries to tasks, Memo and camera?

    What of my three E-mail accounts?

    What of my texts?

    You solved my problem! Thank you very much! I was going to pick up the phone to the service center of Sprint for the hard reset and restore process. After obtaining your response, I called Sprint and spoke with a person of advanced technical support. He played the reconfiguration of network and I now have my real phone number back on the phone. You save me a lot of time and effort - thank you again.

Maybe you are looking for

  • 6 fall wifi iPhone

    my iphone 6 ios 9.3.3 fall a wifi signal all the time, and the signal is weak. When nearly rooter is fine, even was on ios 9.3.2,and if I update and will sort a problem but still no luck. Sorts disconnect from the router, fotget wifi and connect agai

  • Why AE distributes incorrect DNS

    I have the latest Airport Extreme the latest version of the software running.  My AE is set to do the routing for my local network.  Then I have a modem/DSL router that is configured in Bridge mode that goes for my AE.  When devices connect to my net

  • HP Pavilion 17-f065us: power and buttons f6 (Mute) remain lit after a stop on HP Pavilion 17 - f065us

    I have upgraded to Windows 10 in October 2015 and everything worked very well until about two weeks ago, I noticed that when I would stop my computer Power and buttons f6 would remain lit.  I would go ahead and close the lid of my but next time I wou

  • Very disappointed with Yoga 10 HD +.

    First of all, I talked to the customer service agent is not even aware of such a model. He said 'Are you talking about a 10 Ideapad', ' what is HD + "etc. > Sharpness much less than expected > Animations terribly slow/choppy (as slide it between the

  • BlackBerry Smartphones "BOLD" falls down too often

    Hello I had this problem for some time. I don't remember if my phone used to hang when I bought first, but I think that this problem came later that I started using it. My OS version is: v5.0.0.400 (I think it was later) and platform (5.1.0.110) I no