speaker on ipad outlet does not work

Similar Questions

• Pro 9.7 inch iPad, cell does not work as a hotspot

  in Switzerland, announced as working with Swiss internet telephony providers and can be used as a point of personal interest.

  It does not work. I took to an Apple store and they tried with my SIM card, with other models, like the Air2 iPad, and it shows Personal Hotspot on the setting.   But not on my version iPad 9.7 Pro cell.  So they took to their own view of the Apple store model, and it shows the same thing as my own iPad Pro, meaning does not show 'personal hotspot.  The Apple technician told me that it is a problem with the phone Sunrise provider.  But I have the iPhone 6, iPad Air2, and works with them very well. These shows 'personal hotspot.   I took the phone to Sunrise store, they verified my card, account and I tried with several of their models to shop with my SIM card, and everything worked.

  I got home, I took my card SIM is not working card from my iPhone, put in the Pro, but works with my Air2.  I took Swisscom, who works in the iPhone 6, iPad Air2, showing "personal hotspot" but not on my model Pro 9.7 inch iPad.   I tried all variants, all models are running on IOS 9.3.1.  the only combinations of different SIM cards and iPhones and iPads, the only combination does not show Personal Hotspot in the Setup menu is the Pro 9.7 inches iPad model.

  Shop Apple says nothing wrong with their product.  Sunrise said nothing wrong at their side, and I find myself alone.

  BTW, the Apple store staff may even not show me a working model, i.e. their display model of the iPad 9.7 Pro with cell with setting menu displaying Personal Hotspot power.  If they don't have a working model to show me, how can they say nothing wrong with Apple.

  Can someone help me?

  Try this:

  To install or configure a Wi - Fi mobile access point, follow these steps:

  Note: Cannot change parameters of portable Wi - Fi access point when a Wi - Fi connection sharing is enabled.

  1. From the home screen, tap settings.
  2. Click on Personal Hotspot.
     • If this option is not available, press on cell phone > Set Up Personal Hotspot to activate.
     • Your account must support this or you will receive a prompt to contact the customer service
  3. Press the switch to turn on Personal Hotspot.
     

• OBIEE on Ipad 2 does not work

  Hello
  
  I have a problem with mobile applications to oracle business intelligence (ver. 11.1.1.5.0.110418) installed on ipad 2 with ios 5.0.1. When I try to run the action as drill, its does not work.
  
  Before, I had installed the same version of the app on ipad 2 with ios 4.3.5 and its work properly.
  
  do you know anything about this problem?
  
  Thanks for your answers,
  
  
  
  
  Karen Madelaine

  No, I haven't had anything special to do, just downloaded the app and went down. That said, I think that Oracle has released a new application with OBIEE 11.1.1.6, maybe it would help if you try to download that?

  Sorry, we just use the standard drilling column, it seems to work very well, haven't really done anything special at all.

  Scott

• the apple remote app installed on my air of 6s and iPad iPhone does not work to control the apple tv

  the apple remote app on my iPhone 6s and iPad Air, home sharing is enabled on all devices and the MBP, airplay works for mirroring via tv application, however, I have over the display of the remote app to control the apple tv, though the library, iI figure on my MBP

  Hello Pmilkes,

  Thank you for using communities Support from Apple!

  I understand that Remote on your iOS devices does not longer work to control your Apple TV. To begin troubleshooting this situation, I recommend you to read on the following article and through the implementation of the process to ensure that your network and devices are configured correctly.

  Set up remote for your iPhone, iPad or iPod touch - Apple Support

  See you soon!

• FaceTime iPad / imessage does not work

  I've been using FaceTime and iMessage for many years on my iPad.  Some time yesterday both stop working.  I can't make a call FT (for my iPhone or abroad).  All calls 'will not ring"while calling, then the 'FaceTime' unavailable message under the name called.  Messages get a "issued no.

  WiFi is connected (e-mail and Web sites works very well).  I have reset networking on the iPad (as hard power turned off/turned on), but also power/turn off the modem and wifi at the airport.  A test, I connected the iPad for the "hotspot" wifi on my iPhone (which is connected to wifi even) and that worked very well.  But connected via wifi to the normal House nor app works.  As well my iPhone and my wife FT & iMessage work very well using the wifi at home even.

  I need to correct the above message about the connection "hotspot" WiFi at home.  When I connect to the hotspot the ipad, the iphone automatically connects to the cellular network (with wifi turned off).  Then put the iphone on home network wifi disconnects the connection hotspot to the iPad.  I sorry for this confusion.  The two iPhones still FT & iMessage using wifi at home without any problems.  It's just the 2 iPad applications that do not work using wifi at home.

• is there a problem with dmhx wierless speaker jam? mine does not work and I am sure that they are correctly installed

  I installed dhmx jam wireless speakers in my windows of the bridge 8 and he will not play again

  Hi Jan,

  I understand that DMHX wireless speakers do not work on your computer Windows 8.

  1. do you get an error message when you try to use the DMHX speakers with the computer?

  2. What is the model of the enclosure of ham HMDX?

  3 have you tried to use these speakers with another computer?

  I would suggest trying the following steps and check if it helps.

  Method 1:
  

  Run the hardware and devices Troubleshooter
  

  a. press the Windows key + X and then clicking Control Panel.
  (b) in the search box, type troubleshooting and then click Troubleshooting.
  c. under hardware and sound, click on configure a device.
  NOTE: If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 2:
  

  Check if the Bluetooth support Service is started by following the steps below:

  a. symbol Windows + R press keys simultaneously on and type run, services.msc, press ENTER.
  b. right-click on the Service of Support of Bluetooth and click on start or restart.

  Method 3:

  
  I suggest you to refer to the procedure described in the links for how to turn on Bluetooth.

  Why Windows is not find my device? :

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device #section_4

  What happens if a device is not installed correctly?

  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Add, view, and manage your devices and printers:

  
  

  http://Windows.Microsoft.com/en-us/Windows-8/install-view-manage-devices-Printers

  Configure your devices:

  
  http://Windows.Microsoft.com/en-us/Windows-8/set-up-devices#1TC=T1

  Listening to your device via Bluetooth wireless

  http://www.hmdxaudio.com/Media/documents/hmdxaudio/instructionbooks/HX-P230_EN_IB.PDF

  If the problem persists, I suggest you to contact support HMDX.

  http://www.hmdxaudio.com/hmdx-support

  If you have any additional questions or for any question related to Windows, feel free to post. We will be happy to help you.

• IPad 2 bluetooth does not work with bluetooth speakers?

  iPad 2 bluetooth does not work with my bluetooth speaker? What should do?

  to connect a bluetooth headset or a speakerphone with a device, it has not been used with before the bluetooth headset/speaker should be placed in the pairing / discovery mode, how do we do everything therefore in the manual of the bluetooth headset / speaker

• 5.1 surround Sound speaker system does not work in Windows 7 Professional 64-bit edition

  My problem is about the same as other users who cannot get their surround sound speaker system to work properly in Windows 7.

  I have a subwoofer and 5 speakers (2 front, 2 rear, 1 for the centre).  Connection to the RealTek HD Audio embedded is simple, orange for the subwoofer, green for the front and black for the rear.

  Test the sound in Control Panel-> windows sound produces a sound on all channels and RealTek HD Audio Manager at the same time, which is the desired configuration.

  However, different applications use different channels.  IE and Firefox use the front channels, VLC/MediaPlayer uses the back.  3D games (that is to say WoW) through all channels.  In each case the subwoofer does not work.

  I tried to download the latest drivers on the motherboard (Gigabyte) manufacturers site.  I even tried the supplied RealTek drivers (even if on the Web from RealTek site which is NOT recommended).  I tried to connect the connectors of the subwoofer to the different takes (reversed black and green).

  I have experimented with the settings in RealTek HD Audio Manager and control panel-> windows Sound.  Nothing works.

  These exact same subwoofer and speakers worked perfectly well on Windows XP.

  I have 2 questions:

  one) has anyone resolved their 5.1 & Windows 7 problem something that I have not yet tried?

  (b) when will Microsoft take this issue seriously?  All Microsoft provided answers just repeat what everyone

  has already tried.

  First disconnect the cable 3 (orange, green and black) then click on Control Panel configuration-hardware and sound - Real tek HD audio manager - central tick, subwoofer and rear pair, front left and right and filling of speaker

  Then click on advance device settings.

  Select "perform front and reading of output devices back two different audio streams simultaneously" and give ok

  Plug all three pins one by one and select the appropriate option in the popup windows.

  That's all.

  You give enough information for me to get this working.   My system runs Win 7 X 64 Home Premium.   When I select 5.1 sound capacity side my 550 x Logitech speakers are not recognized.  If I select 7.1, which is the capacity of my chip Realtek chipset, I can get the two outside are activated as a "rear" speakers and can push the test tones to each of the four surrounding speakers and the combination of Center/bass via the Realtek driver.

  Regarding the "front and reading of output devices back two different audio streams at the same time" worries... I can't find this option.  There are at least two suppliers of 'control of the interfaces' assets on my system.  One is provided by RealTek, the other by Microsoft.  The access roads to these interfaces is roundabout and confusing, to say the least.

  Some compromises are in order in my humble OPINION.  I have my Pandora one stream play in an acceptable way in my small study.  Many of the source of sounds streamed to me are recorded in stereo or mono, I find myself hitting the 'matrix' on my Logitech X 550 button quite frequently.  Sometimes a more recent piece is delivered which actually looks Ok without the decoder "matrix".

  What I would really like to be able to do is to "reconfigure on the fly" between the built in speakers on my Acer Z3731 system USB bar ' All in One ' and my external Logitech X 550 popular with the ability for the presentation of "5.1 surround sound" through three sons.  When I try your procedure, I don't get separate recognition of each thread, as it is trendy and often end up with its 2.1 being eliminated in my 5.1 speakers, because somehow Microsoft has re-recognized the built-in USB port based his bar instead of the three rear wires plugged into the outlets provided by the manufacturer of the system.

  If there was ever separate 'Speakers' and 'Realtek' icons in the UI on my system, speakers are long gone and I can't get back them.  All I see is the Realtek driver.  I would like to see the two icons 'Speakers' different, I could mark "integrated 2.1" and "5.1 external '", in addition to the driver Realtek.»  How can I get these to reappear?

  Can anyone suggest a way to have two different sets of "speakers" recognized and identified in the Microsoft UI in addition to the Realtek driver?  If I could get because of this, I think that the driver would let me 'set as default' one or the other speaker set, and I 'software switching' capable of letting me choose the external speakers or integrated sound bar offers the sound.

• My iPad Apple 3rd generation wifi + his cell phone does not work

  MY 3rd generation Apple iPad, wifi + cell

  model number MD408LL/a

  Serial number DM * VGL

  THE SOUND DOES NOT WORK

  < personal information under the direction of the host >

  All sounds, or simply notification and sounds apps (for example do music and videos app still have sound)? If notifications and apps you have notifications on mute: on the iPad side switch - Apple Support ? If the sounds in all applications which have tried for example soft-reset/reboot of the iPad, insert/remove the headphones?

• SHIFT key does not work on the bluetooth keyboard connected to the Air ipad on ios 10

  the ipad reboots when we use the uppercase key on the air of the iPad. And in some cases, it shows the changing language selection when the SHIFT key is pressed. The keyboard is perfectly fine and works with ipads o

  I also have the same problem.

  I use 2 keyboards, Bluetooth,

  A wireless Apple keyboard - I mean Magic Keyboard

  The other is universal foldable keyboard from Microsoft

  After updating iOS 10.0.1, Caps Lock does not work, but change language or restart the iPad or it's like restarting the application (kick out of the home screen),

  I thought it happened to MS only the product, but when I connected my Apple Magic Keyboard, the same thing happens!

  Difficulty please, Apple!

• "Hey Siri" does not work on iPad Air after updating iOS 10

  iPad Air does not "Hey Siri".  On the other hand, Siri works when I hold the home button.  I disabled Siri and then turn it back on and did the same for the Air iPad and not luck.  My iPhone IS working as it should with Siri.

  Hi Charles!

  I see that you are curious, why "Hey Siri" does not work for your iPad Air after update to iOS 10. I know it's important to make sure that everything works correctly after an update. I'm happy to help you!

  Looks like your iPad model is not compatible with this feature, unless it is plugged into a power source. The problem persists while your iPad to the that air is charging? Take a look at the following Web site:

  Enable or disable the "Hey Siri" and customize the functionality

  To ask questions without pressing the Home button, plug your electrical appliance and turn on ' Hey Siri. With iPhone 7, iPhone iPhone iPhone 6s, 6s, 7 more more, iPhone and iPad (9.7 inches) Pro SE you can use this feature without plug power.

  Use Siri on your iPhone, iPad or iPod touch - Apple Support

  Have a great day!

• I have two versions of the same book on my iphone and ipad.  I want the same book, so I can study on each device.  I tried to remove the books and start again.  It does not work.  Help.

  I have two versions of the same book on my iphone and ipad, which are not synchronized with the other.  I want the same book on each device, so I can study on one or the other.  I tried to remove the books on my phone, ipad & itunes and start again.  It does not work.  Help.

  Hello david.hogan87,

  Thanks for posting about what is happening. If I understand you correctly, you have a book you want on your iPhone and iPad, but neither is synchronizing correctly to have both.

  Have you checked every device to confirm that the same identifier Apple is signed all three?

  iPhone and iPad: head to settings > iTunes and App Store

  iTunes: on a Mac, it's under account or installed depending on the version of iTunes store.  On a PC, it is also under account, and if you don't see the menu bar, click on the triangle in the upper left corner to view the Bar Menu or CTRL + B on the keyboard.

  If all 3 have the same signed Apple ID, post the version of iOS and iTunes for all three devices here, please.

  Best regards.

• Yahoo speaker icon Chinese big5 dictionary web to pronounce the Word does not work on firefox 26,27.

  http://tw.dictionary.search.Yahoo.com/search;_ylt=A3eg.nXHREBSxRUAzBh7rolQ?p=test & fr = SFP
  the speaker icon of web for the Word does not work on firefox 26,27. It works on firefox 24,25.

  Hello mizuc, thanks for reporting that - I can reproduce the problem and get an error in the web console:

  Media resource http://___.mp3 could not be decoded.
  

  Edit: I have filed bug 919572 for this question

• Safari does not work in the iOS on ipad 2 and 4 9.3.1

  Safari does not work in the iOS on ipad 2 and 4 9.3.1

  Assuming that other internet such as connectivity features

  E-mail

  YouTube app

  Music streaming

  works very well

  Settings - Safari - erase data and history of the site

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

• Third party material does not work on iPad 2 Air

  I recently brought an iPad 2 Air, but it was found that some of my third-party devices do not work with it. I also own an iPad mini, so I try the equipment on the mini, it works. I've been worrying is that my iPad 2 Air was a problem of equipment causing it or what. Two iPads running iOS 9.3.1.

  My Equil Smartpen 2, it can connected on bluetooth, but the software does not recognize that the pen was connected.

  My I-Flash Drive have the same problem, the software does not recognize it and hang.

  No matter what iPad 2 Clean Air there have the same problem, or should I send it for repair?

  Denny Lee

  First of all, I would like to try a reset by pressing the power and Home keys until the Apple logo appears.

  If this does not work, I suggest that you visit an Apple store (with all your gear) and ask them to test/diagnose the problem.

  Barry