Speaker rattle

Similar Questions

• Noise of static/rattle speaker Sony Vaio 13 Pro

  Hello

  These days, I hear a crackling/static annoying noise coming out of my speakers.  It is not constant but happen randomly while listening to music or watch video on any volume (even at around 40%).  I can't hear it when I plug in the headphones so looks like a problem with the internal speakers. Could the speakers were blown and will they replaced under warranty if this is the case?  I bought the laptop in June.

  Thank you.

  I figured this out. I went Vaio Control Center and changed the Audio settings for Clear Audio for music. It has been defined to Clear Audio for video. The crackling disappeared. If all goes well, he ain't.

• Rattling sound with calls

  When the call sound is a bit distorted and accompanied by rattle, but not when the speaker is used.

  When I take the Defy close to my ear and shake her, she a little, I hear something rattling physically in the phone, I think that this could be the culprit.

  Do not go through a cumbersome RMA, all this experience? Plans to open myself to see what is happening, probably easy to fix.

  Received a new Defy, problem solved, there was definitely something wrong with the phone's speaker.

• Satellite L650 - 10 M product noise rattling sound with delay

  My laptop often produced a noise of rattling sound (on the speaker or the headphones) of any output device audio with a delay of 2 to 3 sec. I don't have this problem all the time, but could not definitely say any time. This problem occurs even when I m running any applications like media player. But during this delay I ve noticed that the hard drive turns at full speed like disk hard led light in my laptop shows. I also noticed that this time varies from time to time sometimes 1 sec sometimes up to 7 sec. I fear that this could be a hardware problem. My laptops warranty ends in this month of July if this problem can be retrieved by warranty, how to explain the problem to the service provider. I have no evidence to produce service provider .only possibility is by recording the incident but that's impossible because as I said no one can expect this problem to a very special moment.

  I tried to reinstall my windows using the recovery media, but I still have the same problem.
  I tried to run memtest and it say s no problem or mistake was there.
  I tried to run the scan disk and Defrag, but there is no error found.

  Before 6 months, I had the same problem but one day it stood for a long period of rattling noise and eventually lead to a blue screen and which marks the end of my disk.at this instance I tried to re install windows using the disc of recovery, but at this time there, an error came out saying disc problem for raid 0 also I can't even connect to my laptop to this time and strucks to with a black screen.i took my laptop for service provider and got my hard drive replaced. Now with the new drive hard the problem still persists.

  How to explain the problem to the service provider?
  suggestions please

  Post edited by: mohdarshad

  Hey Buddy,

  If you run the version preinstalled Windows with all the drivers and Toshiba tools, you should check the utility disk protection tool. I had a similar problem during playback of music and videos, the laptop freezes for 1 or 2 seconds and caused by this tool because disk head has been moved to the safe position.

  You can change the sensitivity of this tool and I chose the lowest value that does not resolve the problem :)

  Check this box!

• Re: Satellite A300-1HV - strange noise appears left speaker

  Hello

  I have a Satellite A300-1hv with harman kardon speakers.

  The problem is that when I'm listening to a song, or whatever it is there is a noise from the left speaker, but I don't know if it's the current President or the case of rattling or vibration.

  The speaker does not resemble its damaged because when I put the full volume I hear abit of that noise from the right speaker.

  What can we do about it?

  Any help will be greatly appreciated.

  Hello

  According to your description it sound coming from the left speaker is different as the sound from the right speaker. Is this right?

  Well, you also said that you are not sure if it s related to the case or if the President himself.
  I think it might be a hardware problem and therefore, you should contact the ASP in your country for a control.
  Maybe the left speaker needs to be replaced

  Big names

• Is it supposed to be a rattle from inside the phone?

  Got a Defy a few weeks ago. Love it until yesterday when I suddenly cant' hear someone on a phone call and only the speaker/headphone works (like make a few posts down). Back to T-mobile tomorrow.

  However, my phone has a deaf/rattle sound from inside the phone when you shake it, and you can feel something moving inside. I thought it was something to do with sensors/accelerometers in the phone or something, but now the internal speaker is broken I wonder if it is supposed to do this or if she actually always a hardware problem.

  Phone of someone else than the same noise/do the same thing? Is it supposed to do this or not?

  -Daniel

  There should not be a rattle... but there is!

  I have the same problem. It is caused by the battery move when you shake the phone, it doesn't have a tight fit. I used a piece of foam under the battery very thin to stop this rattle noise. Not impressed!

  You will see on these forums that some users have had problems with defective headphones... so far I did not have this.

  Hope that such Defys won't suffer from bad workmanship I really like the phone.

  Check your battery by shaking the phone with the cover off... let me know how you go.

• How to generate a sound (tone) without clicking noise and how to select the left or right speaker

  Hi all

  I try to write write a VI that generates a pure sound of specific frequency and volume, and then sends this tone to a speaker or other (left or right) to be used to teach students about Audiology (hearing these tests may have taken where you hear a noise in one ear or the other).  I created a rather primitive VI to accomplish this, but I am plagued with a number of questions:

  (1) certain frequencies, but not all, the VI produces a rattling at the start and stop of the tone (I think this is related to repeat the configuration and the appeal of the material, but I do not know how to configure it in advance and avoid it - and why he created the clicking sound at all frequencies?).

  (2) at certain frequencies (14000 Hz and more), I do not hear the tone at all on my computer speakers (I still hear the click before and after, but I do not hear the tone.) I know what you might think, but no, this isn't a hearing loss from me :-)

  (3) I would like to be able to direct the tone selectively to the left or right speaker, but at the moment my VI only allows me to choose the 'number of channels' (who I presume "2ch" means left and right), but I don't know how selectively choose only one channel or another.

  Thank you for your helpful suggestions you can offer,

  Eric

  I put together a quick test and dirty without a ramp up and down (good thing for a State MC) as well as the name is not correct but my children are waiting... time for weekend

  I set the buffer to a quarter second, but however the "GUI" is not very sensitive...

• Keep only the voices of those who speak in audio file

  So I have this audio file of a guy who speaks. Of course, it was recorded with a basic camera, theres a ton of background of noise such as plates rattle, or whistles and tweets and whatnot.

  All I want is the voice of the man, nothing else. What are the best effects to apply to this?

  See you soon!

  Unfortunately, you are most likely not able to improve a lot, if any, to this. None of the effects in Audition (or any other audio software) get rid of this kind of background cacophony without affecting severely the audio due. You can try to use the noise reduction, but the frequencies in the background noise will also be the same as in the desired voice.

  The only way around that, I fear, is to use a good off-camera microphone near source during the shooting of this video. In this case reshooting the video would be the best bet. Or maybe get the guy to try to save just the audio and try and it sync with the pictures. That's what the film call ADR (automatic Dialogue replacement) industry. Hearing has an effect to automatically align the newly baptized with the original dialogue.

• speaker to ear iPhone 6 seems very small

  speaker to ear iPhone 6 seems very small

  Hey Chief Nir.

  From what you describe, the sound of the receiver seems low for you. Let's go over some troubleshooting to get smooth it.

  Start by taking a look at your receiver if something blocks or if it needs to be cleaned. Read the article below for more details and additional details to help solve this problem for you.

  If you do not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone
  https://support.Apple.com/en-us/HT203800

  Take care!

• Does anyone else have a problem with the left speaker is much lower than the right?

  Any source that I use the left speaker is much lower than the left. If I put my finger on the right I can feel the pressure of air pushed but not by the left. Is it an iPhone defective 7?

  Hello, TopDog16!

  Welcome to congratulations on getting a new iPhone and Apple support communities 7.  From what I see in your post, you have any questions on the stereo speakers in your new iPhone.  I would be happy to help you with that!

  Indeed, your iPhone has holes on both right and left sides on the lower edge (on each side of the connector of the Lightning).  The holes on the right are only speaker on this edge of the phone, however.  The other speaker in the pair is at the top of the phone, where the cut is, just above the screen.  Check here to see if sound comes out.

  This page has a large diagram of the iPhone of 7 speakers (in the section entitled "Buttons and external connectors"): iPhone 7 - technical specifications

  Have a great rest of your week!

• Apple Watch can play music through its built-in speaker?

  I do a decent amount of race and the latter I ran with my phone and just play music on the built-in speaker. It's nice to not have to helmet bouncing around and it feels safer because you can hear the traffic and so on.

  When first announced, I was under the impression, given that a built-in speakerphone, you'd be able to play the music stored on the watch through said pregnant. I haven't seen all the posts about this and now think that it is false.

  So that you can?

  Obviously, the quality and the volume would be questionable, but still, I feel that it would be nice to have the option. Thank you!

  Hello

  It is not possible to play music from the playlist synchronized via the loudspeaker on Apple Watch.

  On the contrary, your watch can be coupled with a Bluetooth headset to listen to music when you run.

  More information:

  Listen to music on your Apple Watch - Apple Support

  Use the Bluetooth with your Apple Watch - Apple Support Accessories

• I dropped the cream cheese in my speaker

  I dropped my phone down speaker in my bagel and penetrated my speaker of cream cheese and now the sound is muffled and I can barely hear at full volume.

  There is no way to clean that. Try to introduce something to remove the cheese would only push it more later in, or if you've tried some type of liquid, it would be still worse. I suggest make you an appointment at the Apple store nearest Genius Bar, explain the situation and they can explain your options. It would be more than likely one out-of-warranty replacement. Good luck.

• Mini Mac, microphone, speaker?

  The Mac mini has a speaker and microphone, so it begs to play your playlist?

  It has a very small internal speaker. It generates very low quality and is really intended to alert sounds.

  It doesn't have a microphone.

  You can get a USB mic and plug the PC speakers with 3.5 mm.

  You can also use a headset with a single 3.5 mm plug that has headphones and a microphone lke who came with iPhones before the iPhone 7

  You can also get a USB webcam, since those who have microphones built-in

• 7 Top rattle phone iPhone

  It seems to be a rattle abnormally strong from my iPhone brand new 7.  I know a certain level of it's normal, but it of boring dish, tapping the screen to tap or tap apps what anyone in the upper third of the screen of the phone has this rattle.  I followed the rattle and can only conclude that sound of the camera, the reason why I upgraded to this phone in the first place.

  Is this normal (and absurd) or something I should take in?

  Hello

  I noticed the same thing on my iPhone more than 7.

  IF I tap the top of the phone or the base around the home button it vibrates like something loose inside. I moved from samsung note 4 and never had problems like that.

  Seems that other users of iPhone 7 are starting to notice this problem too.

  Response

  Useful (0)

• iOS 10 no sound from the speaker of the ear or EarPods

  After update of iOS 10 (in 6 s iPhone and 5s) I have a problem then to make or receive calls. Most of the time it is no sound from the speaker of the ear or EarPods and I have to press the speaker during calls to listening. To get back what I have my iPhone and open it again. This seems to happen after that I used once the EarPods.

  Be aware that I have consume EarPods in 90% of my calls and iOS 9 I had no problem at all.

  Hello Billy78GR,

  Thank you for using communities of Apple Support. It is my understanding that you met the receiver and headphone audio problems after update to iOS 10. I know that it is extremely important to be able to hear others during calls. I'm happy to help you to get this resolved with you.

  First of all, I recommend you restart. This can solve many unexpected behaviours. Follow the steps below to restart.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  As you use the headphones on most of your calls, I recommend checking and removal of dust or debris from the helmet. If the problem persists, please refer to the additional steps in the link below.
  If you do not hear a person, a call or a voice message or if the sound is not clear on your iPhone

  Have a great day!