Speakers do not work after 1 week

Similar Questions

• X 61 speakers does not work after last update Thinkvantage... help please try everything

  Hi all...

  So after a Thinkpad update this morning, my speakers stopped working. Half an hour before the update, speakers worked very well. The X61did is not contact anytihng, wet, hot, or no matter what impact at this time.

  The headphone Sockets worked, even if the internal speakers have not. I tried everything: uninstall Thinkpad was last updated to see if this caused the problem. I tried to reset the audio settings, nothing. I tried updating the BIOS and got the message that my bios is already up-to-date. I tried to get a sound card driver update, but given that the helmet worked I know that it is a speaker problem. Always done, no luck. I looked at every single place for a button mute or anytinhg, and everything shows it worked fine. There is a green check mark next to the speakers in the sound menu, and when I tested them for material, he says they worked very well. It shows that they are connected to the ports. I did a system restore (which did not work until I went in the ThinkPad menu to restart the computer), and then made a quick restart working then. I tried to reset the settings of the system. I tried to go into the system bios to see if the speakers somehow got muted. So far its everything that I can think of, and everything on google I found.

  I bought the computer 3 months ago today. I would send in warranty but would like to try and attach it to the front... I don't think it's a software problem unfortunately. And I have midterms in next week otherwise I would send it. Any ideas? I can do without voiding the warranty?

  great! Have fun with your tablet.

• Synaptics touchpad does not work after a week of use USB mouse

  I have a laptop acer aspire 2920z-4A1G16Mi that has genuine Windows vista home basic SP1... .for a week I used USB mice later, I tried to use my touchpad synaptics but it did not work, but my USB mouse still works. so on the acer website I downloaded the driver and reinstalled again and again, but it did not work.

  In Manager devices every time I click on and click

  Same request I press the CAPS LOCK key on the keyboard my keyboard is locked and iam unable to type even a single letter, although the USB mouse works. I even tried "system restore", but I have not tried "System Restore" which I have no knowledge.

  Thank you for your help!  :)

  Hello

  Contact Acer Support.

  Sorry, no better help.
  Rob - bicycle - Mark Twain said it is good.

• My speakers do not work after the installation of the last

  Hello!

  After that last HP´s download from HP Support Assistant, my speakers and subwoofer (audio Beats), do not work.

  But the headphones work fine.

  Spotify does not, they say that my sound card does not recognize them.

  It's my unit:

  HP Pavilion DV-7 (IN WARRANTY)

  Nº of series 2CE2191SCM

  Prod No. DEX02UA #ABA

  Microsoft Windows 7 Home premium

  IDT High Definition Audio Codec

  Could you give me a solution step by step, easy to understand, as I don't not computer very experiance?

  Thank you very much.

  Check your model number again, I can't find the one you listed. You can get the product number by pressing Fn + ESC key or check the service Tag.

  Click on the link below. Enter your product number. After you enter the PN, click Next, then choose the software & Drivers.On the next page use the menu drop down to select your (probably Windows 7 64-bit) operating system. A list will fill with the drivers. Download & save the last Audio driver.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Go into the Control Panel, programs & features - software uninstall IDT. Reboot the laptop. After loading Windows, install IDT audio by using the downloaded file.

• Satellite C650-16U speakers does not work after battery ran down

  Hello

  My wife and I was watching a DVD on the computer and did not know that decision was not lit, and therefore the computer off. When we restarted it after that food was missing the sound no longer works, and I have been unable to restart. I have restarted the computer, checked all very silent buttons etc, and I have uninstalled/reinstalled the driver. When I tried using the helmet on the laptop, the sound is fine, but it does not work in normal contexts, when nothing is plugged.

  I hope someone can help!

  Thank you

  Hello

  In addition to checking the reading in Control Panel-> sound tab, you must remove the battery and unplug the AC adapter when the laptop is OFF.
  Hold down the power button / 30 sec long and then put the two parties.

• Creative process of cloud and Lightroom does not work after one week

  I installed lightroom, photoshop and creative cloud 30 days trial a week ago.  It was great to work for about three days, and then slowly lightroom stopped responding whenever I opened it, and each time was worse.  Now I can't open it.  Icon creative cloud on my screen has a red exclamation point and shows nothing but empty window with the timer of rotation if I click on it.  I would really like to continue to use my trial before I have buy the program.  Open lightroom, so I can export the photos I was working.  Can help on a MacBook Pro, someone help me?

  I couldn't leave creative cloud, nothing happens.  I really couldn't do anything but open photoshop... which is not what I want to use.  I'm so uninstall all and try vacuuming, I read on... and then reinstall it.

• After installing windows 7 speakers do not work

  After installing Windows 7 my speakers did not work

  Hello GregoryDe Voe,

  1. have you installed the latest drivers for your audio card after the upgrade to Windows 7?

  I suggest that you run the sound troubleshooter that will automatically diagnose and repair problems you have with the sound.

  Check out this information for more information on this:

  a. open the Audio playback troubleshooting utility by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting.

  b. under hardware and sound, click on the audio playback problems.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  I suggest that you install the latest drivers from the computer manufacturer site and check if you have the same problem.

  You can check the below article which will give you information on how to update the drivers:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you
  Irfan H, Engineer Support Microsoft Answers

• The speaker does not work after update from hp...

  I don't know what was the update. But it's from HP. After that, he asked to reboot the system. Noah speakers do not work...

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 8.1

  One when you're done, shut down the laptop, unplug the power adapter, and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• W700 speakers do not work

  I noticed recently that my speakers do not work, but when I plug in my headphones I can hear everything. I could use some help to solve this problem, thank you!

  Well, I can't quite explain it, but my speakers work now after the multiple computer restarts. Ah, well.

• FN + b keys do not work after installing Win7 Ultimate (HP Envy 14 BE)

  FN + b keys do not work after installing Win7 Ultimate (HP Envy 14 BEING) - not able to use the Beats speakers. The software updates that I have to install?

  Hi Jim,.

  Open windows control panel, click the drop-down list box "view by" at the top right of the window and select "large icons" - you see an entry for Beats Audio in the list and if you do, it's actually launched if clicked?

  Kind regards

  DP - K

• (hp 6530 b) my speakers do not work unless the headphone is plugged!

  I have (hp 6530 b win 7 64) I have a problem of noise from my speakers do not work unless the headphones plugged I installed upgrading the sound card and the problem still there.

  and when I keep the connected headset and restart sound works normally, but after a few minutes back

  Finally I found the solution... it's the finger printing device and I don't know what the relationship is between the fingerprint and noise problem anyway the solution is to install the latest definition of the fingerprint and I found its proper functioning !

• Stereo video recording does not work after update to ICS

  HII am dido in the India. I've updated my xperia mini (ST15i) to ICS. After that the stereo video recording does not work. Last week, I found a new update for the CSI and I updated to construire.587, now also the same problem exsists. Someone please help

  You can fix it, but you need to root your phone

  Look at the xda forum how do (you must change a setting in a file config. Furthermore, also you can improve some other characteristics of the camera)

• speakers do not work

  There is an automatic update of Windows on my computer today. Now my speakers do not work with Firefox or Chrome, but they do not work with Internet Explorer, I prefer not to use as my browser. What has happened, how can I get that back?

  Click on the link below. Enter your product number as that indicated on the Service tag on the bottom of the laptop (can be under the battery). You can also get the product number by pressing Fn + ESC key. After you enter the PN, click Next, then choose the software & Drivers.On the next page use the menu drop down to select your (probably Windows 7 64-bit) operating system. A list will fill with the drivers. Download & install the latest Audio driver.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

• product name: Pavilion g6-2255sx problem: speakers are not working correctly

  Sometimes I turn on the computer and the speakers do not work but after reboot they begin to function normally... when I go into the control panel and try to test the speakers a poster error that looks like this

  "This device is used by another application close all devices that are audio playback on this device and try again.

  don't know what that means

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

  Recovery Manager - Windows 8.

  Recovery Manager - Windows 7

  Kind regards

  DP - K

• His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

  No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

  Any help will be much appreciated. Thank you.

  As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

  Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.