Speakers on Moto G 3rd generation does not

Similar Questions

• Apple 3rd generation does not after having installed new router put I in the codes manually

  Hi recently had outages etc and a new installed router in wifi but now my apple tv 3 does not work but only home screen sharing/settings see I am signed the Mac for home sharing.  When I go into network settings I see the configuration is automatic, but the router shows that n/a, does that mean that I have to put codes?

  TIA

  Wendy

  You have connected the Apple TV for the new router?  You will need to make sure that the Apple TV is connected to the wifi network, which broadcasts the new router...

  Get help with Wi - Fi on your Apple TV networks - Apple Support

• Apple iPod touch (3rd generation) does not detect

  Every time I plug my iPod windows media player doesn't recognize that something's there.

  Hello

  Windows Media Player does not detect the Apple ipod, it would be best to contact Apple and try to install itunes and check if this may help.

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the information is useful.

• Motorcycle G 3rd Gen does not load on

  Hello

  After the update of correction Stagefright, the Moto G 3rd Gen does not load on, I have to disable in order to load it.

  Edit: the problem occurs when the device has reached the red mark.

  Hello

  I did factory, now my bike G3 XT1543 works very well.

• Why iPod nano 7th generation does not support Khmer language? New update for this problem please Apple release?

  Why iPod nano 7th generation does not support Khmer language with the latest version 1.1.1? Apple could release a new update for this problem?

  I am from Cambodia, I love Apple products, so I need Khmer language with all Apple devices!

  Thank you!

  For Apple to see your application, you should repost it to

  http://www.Apple.com/feedback

• HP Pavilion p6 2400 - 3rd monitor does not

  Hello

  Buy HP Pavilion p6 2400, core i5, GEFORCE graphics card. Windows 8.

  Bought 2 DVI adapters for 2 screens and 3rd screen using HDMI.

  HDMI and another screen works very well, but a black screen with ´no video feed´ happens. Also, windows does not recognize the third monitor.

  The guy in the computer store told me that was all that I needed...

  Any suggestions?

  Thank you very much!

  Magnus

  Here are the specifications of your desktop HP Pavilion p6-2400es. According to the specification, this model comes with a NVIDIA GeForce GT 620 graphics card and a 300 Watt power supply installed in the factory.

  

  (1) - HDMI (digital only) (2) - DVI - I (digital and analog)

  Maximum resolution:

  DVI (dual-link) resolution: 2560 x 1600 x 32bpp at 60 Hz

  HDMI resolution: 1920 x 1080 (1080 p)

  An analog VGA resolution (with adapter): 2048 x 1536 32bpp to 75 Hz x

  1 GB on-board memory

  Memory size: 64-bit

  Memory type: DDR3

  Blu - ray support

  Supports HDCP

  Supports up to two displays at the same time, in the following configurations:

  HDMI + DVI, HDMI + VGA

  You can run three screens provided you purchase displays a graphics card capable of supporting three or more simultaneous and a diet appropriate for the graphics card.

  or

  If you do mostly Office type stuff (spreadsheets, word documents, day trading, light video watch, etc.) on the computer... you can opt to purchase a USB-to-video adapter like the eVGA UV plus + UV39, or one of the many other similar cards on the market. (I have and know that the eVGA UV more + UV39 works as advertised, while many others have not).

  Please send Bravo

• my ipod touch 6th generation does not load and the symbol not load does not appear. I tried switching cables.i have also tried pressing home and turn on the button for 20 sec... but nothing does. Help, please

  my ipod does not work I tried everything, but he continues to refuse to work. It's only a few weeks. nothing seems to be damaged. the symbol not charge also refuses to come. I think he's dead, I need help badly

  Connect to iTunes & restoration

  Thin I your device is in Recovery Mode so the only way is restoring iOS

  If iTunes does not identify your device does take to Apple

• My iPod 5th generation does not start (it will stay on the apple logo) and will not be detected by iTunes.

  Last night I tried to turn on my iPod that has not been loaded. I plugged it so that it can start loading. I think the iPod as was the accused, has no need for me to start and should have done by itself. When I pressed the button home to start using it, I noticed it was not on. Then I pressed the power button and then saw he was showing the Apple logo and then it turns off again. I tried pressing the "home" button and the Start button / stop at the same time and the same thing will happen. I also tried connecting to my computer and it did not recognize.

  Try the remaining actines of the:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• iPod touch 5th generation does not illuminate.

  I got this iPod since the end of 2013. The home button has stopped working for a period of one month. Last night my battery was sufficient to last for several more hours, my iPod worked perfectly well. Then when I go to check this morning, it does not work. Not at all. When I tried to look it up on the way to solve the problem on Apple support, someone explained how try restarting it through the power and the "home" button. However, even once my home button does not work. I tried holding down the power button, then pressed on and even once tried to plug it into the charger to the wall, he still won't turn. Another user said try to connect to Itunes to see if I can restore it, ultimately, it failed for the fact that Itunes does not recognize it. I could really use some help.

  Press the sleep/wake and Home buttons and hold for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Generation does not contain the correct beta right?

  Hi all

  I'd be worried about this warning message?  Thank you.

  "Build 32.0.1.17.99204 does not contain the correct beta right '

  Looks like you need regenerate your provisioning profiles. See ios - App "does not contain the correct beta right" - stack overflow.

  Neil

• iPod touch 4th generation does not not with xcarlink

  Can anyone help. I have recently purchased an iPod touch 4th generation for use with the xcarlink iPod interface. I can't seem to make it work either comes up with is not compatible for loading! Can I get nt music broadcast through your car stereo speakers, but an older iPod worked fine and my iPod 2. Y at - it something I am doing wrong? Y at - it connectors adapter that I can buy to fix this very annoying? Can anyone help?

  Sometimes it works:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  less than ten seconds, until the Apple logo appears

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  However, xcarlink is old and not infrequently an iOS update/new model iPod case compatibility.     All I can find on the site of xcarlink is:

  (6) support iPod 3, iPod 4, Nano, Nano 3, video, Mini, Classic, Touch, iPhone

• Speakers of the connected HDMI TV does not, only portable speakers work.

  Have laptop to connect to the pc with the cable hdmi audio worked on TV but now not working for computer speakers

  Check the sound applet in the control panel to see if the TV is listed and enabled in the playback devices.

• Apple TV (3rd generation) has not been used to 8 MB. I can't respond to all orders. White light flashes quickly.

  I have 3rd gen Apple TV unit connected to the TV by USB cable.

  1. I followed instructions re. Implement

  2. I get no Apple logo screen

  3. when the selection of USB as a source I get no message "no available storage unit.

  4. the white light flashes fast

  The Apple TV 3 must be connected to the TV by HDMI.

• excellent report generation does not close Excel

  I use the excel Report Builder to save test reports.  I can create the report using a template and writing if necessary without any problem.  After each test step, I add data and save the report.  I continue to Excel closed using the modification of the parameter of the State of the window.  I don't want the user to see Excel or even know it is there.

  The question is, when I'm done test and use features, report vi, it leaves an open excel instance that you see in the Task Manager.  And the only way to close that instance is to open one of the files that was created and close it and then exit excel.  The memory used by this instance develops a little every time that a new file is created.

  LabVIEW 2011 SP1 (32-bit 11.0.1.F2)

  Excel 2007

  How can I close excel completely after each test?

  You're just sorry.  Attached is an improved version which works, but again not sure if there is a better way.

  This will get the HWND before disposing of it, has it as usual, then given the HWND get PID (it was the bad terminal last time) and then kill based on that.  It seems to work and I tested this time.

• iPod Shuffle 2 g does not not with 10.11

  I have an iMac with the latest Mac os 10.11.4, 2007 and my Shuffle is now working with her: does not appear in iTunes. In "System information" it is shown as an iPod connected to usb without additional information (such as the ability), bright yellow on it flashes all the time during this is connected. BTW cool shuffle normally and unplug after time music (which was uploaded a long time ago). the iMac USB ports work fine with iPhones, etc, so the problem isn't here.

  So, it can look like something is broken in the iPod, BUT the strange thing is that it works perfectly (synchronization, load, indication) with an old laptop with Windows XP and older version of iTunes, so I suspect that Apple decided not to support this old device in its newest operating system.

  All the world is facing a situation like this?

  the bright yellow on it flashes all the time during this is connected.

  Ok.  Blinking light means 'do not disconnect' - eject before disconnecting shuffle.  This means that there is a connection of data between Mac and shuffle.  And it loads expected normally while the indicator light is flashing.  Do you see the "disk" to the iPod icon in a window on the Mac desktop or the Finder?  IF do you, do a right click and Eject it.  The shuffle light becomes solid (not flashing), Green if the battery is completely charged, amber if still in charge.  Full light means "OK to disconnect".

  In case you are new to iTunes 12, the iPod is displayed as a button on the device on the horizontal bar that runs through the window iTunes.  See screenshot below from my iTunes (on top left) with touch devicewindow, circled in red my shuffle.

  

  You don't see the button of the device in iTunes shuffle when shuffle is connected and the light flashes?  If you do not, some things (separated) to check and try...

  -You use the USB long docking cable (with the shuffle docking station) provided with 2nd gen shuffle?  The short ultra USB host cable to shuffle 3rd and 4th generation does not work with 2nd gen shuffle.  The connector is different.

  -Shut down (power off) your Mac and disconnect all the USB devices.  You can leave standard keyboard/mouse USB connected, if used.  If it's a MacBook, plug its AC adapter so that it does not work on battery power.  Set the switch of the shuffle to the OFF position.  Start the Mac, launch iTunes and connect shuffle to a USB direct on the Mac, by himself.  Is there a difference?

  -Run the disk utility.  Drive of the shuffle will appear in the disk utility sidebar?  (Do not do anything to scramble in utility disk at this time).

  -There is a special utility just to shuffle 1st and 2nd generation.  It is used when the shuffle has a connected data (flashing), but he does not appear in iTunes.  It's the equivalent of a restore in iTunes, when doing a Restore in iTunes is not possible.  Try to install and run this utility

  iPod Reset Utility 1.0.3 for Mac