Speakers Realtek HDAudio work for the computer, but do not work for Microsoft or Quicken help video. What do I need to get this to work?

Speaker test are ok and music disc play like UTube.

Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

Tags: Windows

Similar Questions

  • CD/DVD is recognized by the computer, but does not

    My CD/DVD is recognized by the computer, but does not... tried fix it did not help

    My CD/DVD drive has stopped working.  My computer recognizes the drive but when I put a disk in it cannot read.  I tried multiple disks, but nothing will work.  I tried microsoft fixit, but it does not work.  He said that the media cd/DVD drive is not readable.  Help, please.

    Is that your CD/DVD drive is older than 1 year?  Then, the drive may be defective, with a faulty lens.

    I don't think that any form of manual registry change or fix tool will work in the situation.
    S.Chatterjee

  • My lg800g phone shows connected to the computer but is not assigned a drive letter

    My lg800g phone shows connected to the computer but is not assigned a drive letter

    Hello

    You can manually assign the letter.

    Check out the link and check if that helps.

    Change, add, or remove a drive letter

    If you have any questions on Windows, feel free to let us know. We are happy to be of assistance.

  • To print from the computer, but can not scan from printer to computer. Tried everything. Disconnected power supply, etc, nothing works.

    Have no problem when you print a document from the computer. Can not scan from printer to computer. I don't know that I've scanned because I went from windows 7 to 10. Printer not repeat myself found computer.

    Hi, Rolland,.

    Welcome to the Microsoft community. I might help you.

    To better understand the issue, I would need more information on your side.

    1. What is the brand and model of the scanner?

    2. Do you get any error messages? If Yes, what is the full error message?

    This problem might have occurred because of these reasons:

    1. Corrupted driver.

    2. Hardware problem.

    Method 1:
    I suggest you to run hardware store and check if it helps.

    (a) press the Windows keyboard.

    (b) Troubleshooting type in the search box and press enter.
    (c) click on material and audio.

    (d) click on hardware and devices and follow the on-screen instructions.

    Method 2:
    If the problem persists, I suggest you to download and install the latest scanner driver\software on the manufacturer's Web site.

    Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you more.

  • Firefox starts on the computer, but will not be displayed on the screen

    Firefox is loaded on a dell Windows XP computer; It works fine one day. The next day I had cleaned up cookies and temporary files when I clicked on the icon, it acted like it was running, but would never appear on the screen. When I went to start it again it told me he was running, but I still don't see the program.
    I had to reboot the computer, but when I tried to start it again, it did exactly the same thing.
    I uninstalled and reinstalled but that has not solved the problem.

    Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox and all the leftover program files and then reinstall Firefox. Please follow these steps one by one:

    1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click Exit in the file menu or Firefox) and confirm all future messages.
    3. Now, uninstall Firefox by following the steps mentioned in the article to Uninstall Firefox .

    IMPORTANT: Under Windows, the uninstall program has the option to remove your personal data and settings. Make sure that you have not check this option. If not all of your bookmarks, passwords, extensions, customizations and other Firefox data user profile will be removed from your computer.

    After uninstalling Firefox on Windows, delete the folder of the program "Mozilla Firefox", located by default in one of the following locations:

    • (Windows 32-bit) C:\Program Files\Mozilla Firefox
    • (On 64-bit Windows) C:\Program Files (x 86) \Mozilla Firefox
    1. Go to the Windows Start menu and click on 'computer '.
    2. In the Explorer window that opens, double-click on disk Local (c) to open the C:\ drive.
    3. Find the folder "Program Files (x 86)" or "Program Files".
      • On 32-bit Windows, double-click the Program Files folder to open it.
      • On 64-bit Windows, you'll see a folder "Program Files (x 86)" AND a "Program Files" folder. Open the Program Files (x 86) folder.
    4. You are looking for a folder of Mozilla Firefox . If you find one, right click and select delete and confirm that you want to move the folder to the trash.

    Now, go ahead and reinstall Firefox:

    1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
    2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    Please report back to see if this helped you!

  • Help. Work with a Belkin router... works in the computer, but not by wireless... was fine until yesterday

    Until yesterday the relatively new router was working fine... However, he began to say that the password has changed and I had to click to renew (or repair), but everything I did it now only works if the cable is connected to the computer laptop and not by wireless... Help

    Hi Twentytwo22 (2),

    Thanks for posting that query you in Microsoft Communities. Provide the following information:

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    ·         You use a third-party security software?

    Follow these methods.

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

    Method 3: Follow the steps in the article.

    Windows wireless and wired network connection problems

    You can read this article for more information:

    How to reset the Protocol Internet (TCP/IP)

    I hope this helps. Let us know if you need more assistance.

    Thank you.

  • HP Officejet 6500 Paper Out status on the computer but the paper loaded and test page prints

    We have a HP 6500 CB815A, which works well for almost a year. As of today, we get "Paper Out" status on the computer, but there is paper loaded in the tray... the same high quality paper as we always use. The test printer utility reports the same status. However, the printer can print a test page and fax without printing problem status.

    I unplugged for 30 seconds to reset, but we get the same status.

    Someone has had this same problem and solved?

    Thank you

    Dave

    If you have not tried to reboot your PC, I would. If this does not clear the issue, I would follow the following steps:

    1. Click Start-> Control Panel
    2. Select uninstall a program (it's the heading programs)
    3. Find your driver HP software; Select it by clicking on it once, then select Edit. If the change is not available, select uninstall/change.
    4. Select repair and then follow the prompts for your software repairs itself.
    5. If your software does not have the repair option, it may be advisable to download the latest drivers from support.hp.com site. Uninstall the drivers for your printer, and then reinstall them using.

    If these steps do not work, please post and I can continue further with troubleshooting.

    Good luck

    Brent

  • Vista HomePremium.SP2. Chnge workgroup option not available but may change the name of the computer. Can not enable file sharing. How Iactivate these options? Thanks in advance, Geoff

    Vista Home Premium.SP2. Working Group change option is not available on the system page, but I can only change the name of the computer. Can not turn on either file sharing. How to activate these options? Thanks in advance, Geoff

    Geoff

    1. If it is the domain controller, you cannot change the name of the computer by selecting network ID and this is normal.
    2. If it is a member of the computer in domain or workgroup, you don't have permission to change the name of the computer.
    .

    See this link for more information

    http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/a552c6f8-AB02-44e5-9FF9-471ebc7ac1c6/

  • Windows Vista Business ed. reformat - my computer detects the network but will not connect to Internet

    Can someone help me, I can't reformat a laptop compact with a windows vista Business edition OS. I was wondering if I could use the recovery partition or do I have to use an installation CD. And by the way, just to give you a head I'm just a beginner and badly needs help. the problem I had is I get a strong signal for my WiFi, but again it is not connect to the internet it connects sometimes but then after I reboot my phone it comes back with the same problem, it connects to the internet, but I detect my network, someone told me to just reformat the entire system. I hope someone can give me a help step by step on how to do it. and also I do not see the product key for my system. your help would be greatly appreciated thanks

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    Formatting/reinstalling is overkill. A bit like buying a new car because you have a flat tire.

    To reinstall, you can use either the volume of recovery or the recovery disc, both should work pretty much the same. In general, the product key is located on the system like a sticker (on laptops usually on the bottom). If you can't find yours, you should contact the provider or your network administrator (and in fact, if there is a working system, you should contact them before doing anything).

    Before you do this right, you can try this: click Start and type CMD. Right click on the menu entry that appears and choose "Run as Administrator". Click on continue in the UAC prompt. From the command line, run:

    ipconfig/release

    ipconfig/flushdns

    ipconfig / renew

    Allow everyone to finish (return to the command line) before proceeding to the next. When you are finished, close the command prompt. See if that helps with your problems of connection.

    Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

  • HP Officejet Pro 8500 a Premium: HP Officejet Pro 8500 a Premium does not print the docs of the computer, but will display a test page.

    HP Officejet Pro 8500 a Premium does not print the docs of the computer, but will display a test page.  I constantly get a message that the computer cannot communicate with the printer.   Not only it will be not be printed docs, it will not print web pages using 11 IE or Google Chrome.

    I used print and Scan of doctor, he always reports there are no questions and print page one same test so I can not print anything else.

    Whenever I want to print, I have to restart the computer.  After the reboot, I have a chance to print.   This problem started on February 15, 2015.

    My operating system is Windows 8.1.   I have unintalled HP, rebooted, and then reinstalled the software software:

    OJ8500_A910_1315 - 1.exe

    HP Print and Scan - HPPSdr.exe doctor

    HPSupportSolutionsFramework - 11.51.0049.msi

    All versions were last uploaded on 4 April 2015.

    I have a home wireless network (router Ubee DDW366).  All other devices in the House will be printed on the printer of 8500 has no problems: 2 Toshiba laptops, 2 Android phones and 1FireHD.

    The desk top is installed with a network card Netgear, I don't know the model, but I had it tested by a PC technology to verify that the card works.   The card and 8.1 of Windows have been installed on January 3, 2015.

    I have run virus scans and analyzes malware.  Whenever they show that there are no problems with my desktop computer.  What kind of desktop? Specially designed for my listing of... without brand computer parts store.  ASUS motherboard P6X580 Premium.  Now I will probably get hacked!

    I'm at my wits end.  And it's frustrating when I need to print something and the system hangs.  I often use screen printing to a word document to save in order to restart... but then I lose all sorts of features when I pick up what I needed.  It is also a time consuming.

    This printer we served well for two years and I have expensive cartridges pending; another two cycles of recharge.

    Help?

    Addendum: can I scan with the HP printer help.  I open the HP printer assistant, he "gets" the printer information, then I select "scan a document or photo" and the printer answers.   I have no problem with the sweep.

    It has been awhile, but I played on something you wrote.  "There could be a software conflict with the HP software" everything worked very well... impression was shifted at best; just didn't know if it would work.  So I would eliminate a program, reboot clean, try to print, and then reinstall the software.  I finally found the culprit.  I had a program running in the background, occasionally.  When it ran, HP does not print.  Stop the program and I was able to print... Do not have a problem since I found it... I do not say that it was a software to share files... so I replaced since this program with something else that doesn't cause problems...  It took a long time and I couldn't work the question every day.... but I can say that I have problems printing for the past 5 days!  I can print with confidence.

  • Transfer photos from the camera to the computer, but the camera is not detected on the computer

    Original title: want to help with the camera to the computer?
    I want to d/l my pictures from the camera to the computer but the computer does not recognize camera?

    Hello

    1. don't you make changes on the computer before the show?
    2. what happens when you connect the device to the computer?
    3. you receive an error message?
    4. What is the brand and model of the camera?
    5. How do you connect the camera to the computer?
    6. What is the status of the camera in Device Manager when you connect?
    7. have you installed the drivers for the camera on the computer?

    Check if the camera is detected in Device Manager.
    http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

    Method 1:
    Run the fix it and check.
    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/en-us


    Method 2:
    You can try the steps from the link to transfer images from the camera to the computer.
    How can I get pictures from my camera to my computer?
    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer
    Method 3:
    Try the link troubleshooting steps:
    Troubleshoot camera connection:
    http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

    Method 4:
    If you have any problem with USB connection then try the steps from the link:
    Tips for solving problems of USB devices
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    Note: Apply as well to Windows 7.

    Reference links:
    Change the settings for importing pictures and videos
    http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos

  • Some songs bought on Itunes and add them to an existing selection. They appear in the playlist and on computer but will not be synchronized to the Iphone. Help, please!

    Bought a few songs on ITunes and add them to an existing selection. They appear on the computer and in the playlist, but will not be synced to an existing selection on the IPhone 6. Help, please.

    This is the computer on which the phone is synchronized, and playlist is selected on the tab music from the phone to synchronize the phone? If the 'sync' button is not a copy the playlist update on you have tried to make a change on the screen of synchronization (for example in selecting/disable-selecting a playlist and sync and then get back on your original selection and re-sync)?

  • Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)

    Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)

    What do you mean by "assigned to this disk as the location of the Archive" is this something to do with the software you use?

    The drive is formatted for Mac?  Menu go to menu, click Finder go > utilities > disk utility > click on external drives partition - format it sets out Mac OS X extended.   Otherwise, to save the files on the disk and ease than Mac OS

  • I am the administrator of the computer, but all my files go to my girlfriends name, how can I change this?

    I am the administrator of the computer, but all my files go to my girlfriends name. So I deleted his account, but he always goes. I tried to change the file but it won't let me. What should I do?

    Original title: file name

    Hello

    You did changes to the computer before the show?

    Please follow the steps below.

    Method 1:

    I suggest you to download and run the latest Microsoft security on your computer Scanner and check if it helps:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

    Method 2:

    Try to create the new user account and check if it works very well.

    http://support.Microsoft.com/kb/811151

  • Error - the computer is running an operating system Microsoft Dynamics CRM does not support for the installation of the Extension of reporting Dynamics CRM 2011.

    Original title: Dynamics CRM 2011 Extension of reporting facility.

    Nice day

    Asked me to install this program called Extension Microsoft Dynamics CRM 2011 report Authoring on one of our PC network operations.  The computer is a Dell OptiPlex 960 under Windows XP SP3.  When attempting to install the program, you get the following error message:

    The computer is running an operating system Microsoft Dynamics CRM does not support.  To install this product, you need to upgrade your computer to an operating system supported.  For a complete list of supported operating systems, see the documentation for Microsoft Dynamics CRM (http://go.microsoft.com/fwlink/?LinkID=181018)
    For additional detals see logfile C:\Documents and Settings\bcodom\Application Data\Microsoft\MSCRM\Logs\BIDSExtensionsSetup.log

    Now, normally, I just coordinates with the end-user to him upgrade to Windows 7, however, after watching on the download page of this application (http://www.microsoft.com/download/en/details.aspx?id=13818), I noticed that Windows XP is one of the supported operating systems that can be installed on.  In addition, after looking around on the Technet documentation, I was not given a definitive answer on whether or not this application is not supported on Windows XP.

    So, my question is creation of Microsoft Dynamics CRM 2011 report Extension works on Windows XP SP3, or do we let us upgrade this computer to Windows 7?  Thank you!

    Hi Bcodom,

    In dealing with the problem to install the Extension of Microsoft Dynamics CRM 2011 report creation, I would recommend you to post your question in the help link.

    http://social.Microsoft.com/forums/en/CRM/threads

    Hope the helps of information.

Maybe you are looking for