Specification PVSCSI controller in physical mode in the file of the FVO

Similar Questions

• Sleep mode when the crash go

  From time to time when I turn my laptop in standby mode, it crashed after a while (maybe minutes can be a few hours in standby mode).
  I used the WindDbg tool to watch the memory.dmp file and that's what I got from the tool:
  ===============================================================================================
  DRIVER_POWER_STATE_FAILURE (9f)
  A driver has failed to fill out a power of the PRI within a specific time frame (usually 10 minutes).
  Arguments:
  Arg1: 0000000000000003, a device object has been blocking an Irp for too long
  Arg2: fffffa8025465970, physical device from the stack object
  Arg3: fffff880009f27f0, nt! TRIAGE_9F_POWER on Win7, otherwise the functional device object of the stack
  Arg4: fffffa8026efc4a0, blocked IRP

  Debugging information:
  ------------------

  DRVPOWERSTATE_SUBCODE: 3

  Nom_image: usbccgp.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 5010aafa

  MODULE_NAME: usbccgp

  FAULTING_MODULE: fffff8800acbf000 usbccgp

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

  BUGCHECK_STR: 0X9F

  Nom_processus: System

  CURRENT_IRQL: 2

  TAG_NOT_DEFINED_c000000f: FFFFF880009F9FB0

  STACK_TEXT:
  "fffff880 '009f27b8 fffff800' c67983a2: 00000000' 0000009f 00000000 00000003' fffffa80 ' 25465970 fffff880 ' 009f27f0: nt! KeBugCheckEx
  fffff880 '009f27c0 fffff800' c67983d5: fffffa80'244114f0 fffffa80 '0ccde060 00000000'00000002 fffff800' c6726084: nt! PopIrpWatchdogBugcheck + 0xe2
  "fffff880 '009f2820 fffff800' c66851ea: fffffa80 ' 24411528 fffff880 ' 009f2939 00000000'00000001 00000000' 00070f45: nt! PopIrpWatchdog + 0x32
  fffff880 '009f2870 fffff800' c6683655: 00000000 00000000' fffff800 'c6684cff 00000000'00140001 fffff800' c68fe020: nt! KiProcessExpiredTimerList + 0x22a
  "fffff880 '009f29a0 fffff800' c6685668: fffff880 ' 009 c 9180 fffff800 ' c68fcf80 00000000'00000007 00000000' 0007a25d: nt! KiExpireTimerTable + 0xa9
  fffff880 '009f2a40 fffff800' c6684a06: fffffa80 '00001fa0 00000000' 009c 0080 00000000'00000000 00000000'00000002: nt! KiTimerExpiration + 0xc8
  "fffff880 '009f2af0 fffff800' c66859ba: fffff880'009 c 9180 fffff880 ' 009 c 9180 00000000 00000000' fffff880 ' 009d4f40: nt! KiRetireDpcList + 0x1f6
  fffff880'009f2c60 00000000' 00000000: fffff880 '009f3000 fffff880' 009ed000 00000000'00000000 00000000'00000000: nt! KiIdleLoop + 0x5a

  STACK_COMMAND: kb

  FOLLOWUP_NAME: MachineOwner

  FAILURE_BUCKET_ID: 0x9F_3_usbscan_IMAGE_usbccgp.sys

  BUCKET_ID: 0x9F_3_usbscan_IMAGE_usbccgp.sys

  Follow-up: MachineOwner
  ---------
  ===============================================================================================

  Someone knows how to fix this?

  The problem seems to be related to the D420:

  DRIVER_POWER_STATE_FAILURE (9f)
  A driver has failed to fill out a power of the PRI within a specific time frame (usually 10 minutes).
  Arguments:
  Arg1: 0000000000000003, a device object has been blocking an Irp for too long
  Arg2: fffffa8025465970, physical device from the stack object
  Arg3: fffff880009f27f0, nt! TRIAGE_9F_POWER on Win7, otherwise the functional device object of the stack
  Arg4: fffffa8026efc4a0, blocked IRP

  
  2: kd >! devstack fffffa8025465970
  ! DevObj! DrvObj! DevExt ObjectName
  fffffa80118602f0 \Driver\ksthunk fffffa8011860440 InfoMask field not found for _OBJECT_HEADER to fffffa80118602c0

  fffffa800e4f6840 \Driver\usbscan fffffa800e4f6990 InfoMask field not found for _OBJECT_HEADER to fffffa800e4f6810

  > fffffa8025465970 \Driver\usbccgp fffffa8025465ac0 cannot read the offbeat info from nt! ObpInfoMaskToOffset

  ! DevNode fffffa800df14010:
  DeviceInst's "\2&2ebd5f7a&0&0000USB\VID_04A9 & PID_26EF & MI_00."
  ServiceName is "usbscan.

  Search Google for the USB\VID_04A9 & PID_26EF & MI_00 HardwareID shows that the device appears to be Canon D400-450:

  http://www.Google.com/search?q=USB%5CVID_04A9%26PID_26EF%26MI_00&SourceID=IE7&RLS=com.Microsoft: en - US: IE - SearchBox & ie = & oe

  I suspect that the driver who can be the cause of the accident is the vuhub.sys, which is dated November 16, 2007.

  Can update you the driver for vuhub.sys?

  If the vuhub.sys is a component of Eltima USB network Gate for Windows, try the following link for an updated driver:

  http://wiki.Eltima.com/user-guides/USB-to-Ethernet/install-wind.html

• PvSCSI adapter for physical RDM expandable disk using?

  Hi all

  Can anyone here please indicate if the scenario below is supported for RDM physical disk with the extensible feature in the future?

  R2 Windows Server 2012

  Physical RDM: NTFS table partition GUID 2 TB which can be expandable to 12 TB + in the future

  SCSI controller: pvSCSI SCSI 1:1

  Because the KB article: VMware KB: configuration of disks to use VMware Paravirtual (PVSCSI) SCSI adapters says:

  • Do not use the PVSCSI on a virtual machine running Windows with split volumes. Data may become inaccessible to the guest operating system.

  
  

  Thank you

  If you use physical (amp) RDM, why would you use volumes split inside the guest?  You present a lun 12 to large or smaller and covering inside the guest OS?

  Depending on the version of vSphere you use, this article might help you: how much storage maybe I present to a Virtual Machine? VMware vSphere Blog - VMware Blogs

• restrict the physical size of the wifi network

  Hello

  I intend to cover the building 80x80m by the amount of 1131AG APs and WLC4402 controller. But the strong demand of the customer is to physically restrain the posibilities of the long distance wifi connections (100 m and more building).

  Is there a function in wifi Cisco to drop connections incoming in case if the customer is 100 + m AP? (I mean that the power of the customer is high enough for this)

  What are the regular methods of resricting the physical size of the wifi networks?

  Thank you.

  Someone could be more than 100 meters away using a parabolic grid antenna, and the signal strength is perhaps not different from your regular users.

  You can try using the location device, but I think that even this might go a little goofy, if someone tries to spoof a MAC address.

• Monitor goes into sleep mode during the installation of Windows 7

  Hello, I'm doing a new install of Windows 7 pro on a new SSD. He gets regarding to reset for the second time during the installation, and just before showing the page where you name the computer and configure user accounts, the monitor goes to sleep and won't return. only way to recover is to reset the machine, only to do exactly the same thing again. Anyone know what could be the cause? I used the same disk of windows for many expenses format / install Windows after hardware upgrades in the past and this has never happened before. Can provide the complete specifications of the system if necessary. Help, please!

  Hi Danpedro,

  I see that the screen goes into sleep mode, in the last step of installing Windows 7. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. you have an external display driver card attached to the motherboard?

  3. you format the hard disk during Windows 7 installation?

  Method 1.

  Disconnect any external devices and restart the computer to see if it helps complete the installation of Windows 7.

  Method 2.

  If you have a driver to attached external display card, then you can disable this external driver in the BIOS and check if that helps complete the installation of Windows 7.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• That means the AHCI Mode, Mode RAID & SATA IDE Mode in the BIOS settings means

  That means the AHCI Mode, Mode RAID & SATA IDE Mode in the BIOS settings means

  My computer is having problems when I bought all first it was from another provider which came as a set overclocked PC up the unit everything needed had to be put in my case & add existing hard drives & DVD etc. readers added on the implementation. I used the same location for more than 10 years before that I always built them myself I can build a good setup computer I correspond to different parts inside each other, and then he tested & sent.
  Unfortunately, the store has closed & the owner is sick cannot get their hands on him more & I had to get some add on things like new SSDS & some other bits in my system & the young boy said he would could do this job, but everything went wrong & I lost all new so I decided to recycle me like I used to do it before windows 7-64 came out I was going through a rough patch with me being paraplegic in any case it is difficult to build a new PC, so I chose this store & their confidence that went wrong now & I've been research & learn to catch up with the new technology, I do what I do anyway.
  Thing is my system is never one that you can purchase a manufacturer & I left it with the young boy & it came out all memory & was not necessary but of course upset of that ruined the setting completely overclocked so I did it myself & I got the work faster than ever, & quieter PC I just got the score that he had now , so I'm happy with it, but the names I came across while overclocking I came across that I'm not average or really lot as were dealing with Fast CrossfireX DDR RAM 1600 MHz.
  Please don't tell me that I should not be messing around with what I made since 1989 & made great strides in how everything works, I am not aware about this sort of thing I know SATA what it is & done, but those responsible for setting came from the part of overclocking in the BIOS I put then correctly , but I wanted to know what they represent in more depth. Thanks to anyone who can put me wise on these 3 points only. Malcolm.

  I'm pretty sure that you are on the wrong "forum" for this type of topic. This forum is designed as a support Pro-type Surface ultrabook/tablets and tablet-like Surface.

  That said,

  AHCI - Advanced Host Controller Interface - this is a hardware mechanism that allows the software to communicate with the devices Serial ATA (SATA). It offers features such as connecting hot and native command queuing (NCQ).

  IDE - Integrated Drive Electronics - IDE is basically the 'old' version of AHCI without connection to hot and NCQ. (It is usually used during the era the Parallel ATA (PATA) hard drives)

  Now. Mode AHCI and IDE mode - what is - this? IDE mode is to give you the greatest compatibility with older operating systems. AHCI is as I mentioned above, a modern version of the IDE - use the AHCI mode if you are running recent operating systems (Windows Vista + and Linux kernel 2.6.19+).) IDE mode will allow you to connect older operating systems with SATA drives.

  As I mentioned above, SATA is Serial ATA and the replacement of hard drives Parallel ATA (PATA).

  RAID - this is a storage technology where combine you multiple disks in a unit of 'single', depending on the mode, there may be RAID-0 and RAID-6 and each with different hard drive configurations. I will explain the simple examples: RAID-0 , which is the distribution but no parity or mirroring, this means that there is no data redundancy, if there is a failure on a disc, it will cause the loss of data on the entire RAID array. Ex: You 0110 as writing the data, 01 goes on disk 1 and 10 goes on disc 2, allowing a faster data read/write access.

  RAID-1- This is the opposite of RAID-0, which is mirrored without interlacing (no parity or the other). Basically, this means that you have an exact clone of disk 1 disk 2 disk 1 failure.

  RAID0 + 1 is that both RAID 1 and 0 is, IE interlacing (write data simultaneously to two [or more]. disks more mirroring failure) the minimum amount of disks required for this type of installation is 4 IDENTICAL drives.

  There is also RAID 2, 3, 4, 5, 6. That is just more implemented different configurations of distribution/parity/mirroring on disks.

  That being said, your RAID mode will allow you for some type of RAID configuration, if you choose to do so.

  Supplement: Many SATA controllers can enable AHCI separately or in combination with RAID support. Recommend Intel choose RAID mode on their motherboards, allowing also the AHCI, rather than AHCI/SATA mode for maximum flexibility (in the case that you ever want to build a RAID array), because there are a few problems that occurs, usually BSOD, when you choose a different mode once an operating system is already installed.

• Physical movement of the databases using Data Guard

  Hi all

  We need to move our equipment to a new physical location.

  Our production database (11.2.0.4) is replicated to another computer using dataguard (MaxAvailability mode)

  The plan was to move the machine SRD first Monday, then the database of production during the next weekend.

  Do you have an idea how to do a 'pause' the replication when the move will take place for two servers?

  We do not want to do a failover because the production should not be available over the weekend.

  Thanks in advance,

  Renaud

  Do you have an idea how to do a 'pause' the replication when the move will take place for two servers?

  There is no such method of the break, but you could defer the primary log shipping to wait.

  ALTER system set log_archive_dest_state_2 = reporter; #assuming that log_archive_dest_2 on the primary it again waiting for ships

  But, you must make sure that the archives on the primary are not lost or deleted after reporter such as these are not available on standby.

  Once you 'enable' the destination deferred, Eve should automatically catch up with the primary.

  -Jonathan Rolland

• The controller throws an OAException, but the error message does not appear

  I made a controller to add validation business customized to a specific region of a page of Iprocurement. The controller throws an exception, but the error message does not appear on the page.

  Why when the exception is thrown, the system do not stop the processing of the page and displays the error message?

  I do not know the controller is reached because the page through JDeveloper debugging.

  -PageLayout

  -stackLayout

  -subTabLayout <-my controller is located in this region

  SerializableAttribute public class AccountsDistsValidationCO extends

  {oracle.apps.fnd.framework.webui.OAControllerImpl}

  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)

  {

  super.processFormRequest (pageContext, webBean);

  throw new OAException ("something just happned");

  }

  }

  I should to use the following to solve my problem

  pageContext.putDialogMessage (message);

  pageContext.forwardImmediatelyToCurrentPage (null, true, null);

  Reference:

  OAException.ERROR is not throwing the error

• RDM x 32 bit and x64bit (physical mode)

  Hello

  Is it possible to remove the physical mode of x RDM 32 2003 Standard edition bits and then add in the x 64 2003 standard edition OS? is supported and documented somewhere?

  A RDM is simply a pointer to a raw LUN on a storage system that is formatted with the comments of functioning of the NTFS file system (in your case). You can connect the LUN/RDM to any other VM that supports this independent file system if it is an OS 32-bit or 64-bit. You can even present such a LUN on a physical Windows host and it will work.

  André

• How to-disk snapshot RDM in physical mode and RDM issues.

  Hi all

  I want to upgrade a few VMS version 4 to 7 production equipment, so I can save them using vDR.

  One recommendation is to take snapshots of the necessary virtual machines before the hardware upgrade, I'm unable to do so because of the disc RDM in physical mode.

  I'm looking for the answers to the following questions:

  -How do we or can we change disc RDM in physical to virtual (all risks, process involved, etc...)?

  -How a US dismantle and mount RDM disk without losing any data?

  -Can we dismantle and mount RDM disk to a different virtual computer?

  -We convert RDM to a normal virtual disk on vmfs data storage?

  Enjoy your time reading/response.

  Ta

  Hi dia,.

  Please find the answers online.

  -How do we or can we change disc RDM in physical to virtual (all risks, process involved, etc...)?

  Remove the drive from RDM virtual machine and add the ROW again using virtual mode.

  (Do not select the option Remove evil in the virtual machine and delete the files from disk)

  -How a US dismantle and mount RDM disk without losing any data?

  Same as above. (if I understand your question)

  -Can we dismantle and mount RDM disk to a different virtual computer?

  Remove from VM-1 and add the VM-2 by using the VM settings.

  -We convert RDM to a normal virtual disk on vmfs data storage?

  Yes, we convert RDM on the virtual disk using the Migration (SVMotion). To do this the virtual machine must be powered off the coast of the State.

  Let me know what answers your questions.

  Concerning

  Satya

• Physical requirements for the collection of network adapters

  During the aggregation of physical NIC cards on a host ESX (i) the physical switches that NICs are connected to have all of its ports are associated as well?

  Thank you

  Real grouping only with the IP hash and require a specific configuration also on physical switches.

  To keep things simple, I suggest using the default grouping policy (it's just a load balancing solution) which works very well with all kinds of switches.

  André

• I can't match additive mixing of AE mode using the first blending modes. Any ideas?

  I had trouble matching mix additive mode of AE by using first blending modes.  It is not listed under the modes within the opacity so I wonder if it's somewhere else.  I could easily take in AE, but the fact that I probably forget something so easy to do is killing me.

  You should ask in the forums for the program (s)

  This forum is about the cloud as a process of delivery, only not on the use of individual programs

  If you start the https://forums.adobe.com/welcome Forums Index

  You will be able to select a forum for the specific Adobe products you use

  Click on the symbol "arrow down" on the right (where it says all communities) to open the drop-down list and scroll

• No display physical drives in the H700 built-in Bios utility

  I really hope someone can help out me!

  I have a R310 with the following:

  PERC H700 integrated Raid Controller (in the riser 2)

  4 x 500 GB WED5003ABYX (supplied with the Dell R310)

  24 GB RAM PC - 10600 in 6 x 4 GB DIMMS

  Bios R310 is 1.12.0

  H700 package is 12.10.1 - 0001

  The server was using software raid S100 before and needs to have installed on it so a H700 integrated Raid Controller has been installed in the mounting location 2 CentOS.  The H700 utility only allows to erase the configuration (that there is no) and set security for drive encryption.  When you ctrl-n to see your physical readers, there are none.  The other virtual drives options appear dimmed and you cannot select them from the menu.

  The R310 bios is set to ATA and show all 4 drives in the bios.  If you set the RAID bios and enable the S100, disks raid controller all show them in the S100 utility.  I tried to configure the H700 by using options in the R310 bios without success.  I put the bios R310 for RAID / ATA with readers off and auto and none of the drives appear in the H700 utility.

  Is there a kind of newsletter to withdraw as in the S300 version?  I saw a card in the slot in front of Mount 2 storage.  I tried to boot UEFI and BIOS without success to try to get the H700 to see the 4 SATA drives that bios R310 and the S100 can see.  Is there another place that the S100 may have to be disabled without counting the R310 BIOS?

  I hope this is an easy fix and I'm a noob for overlooking something blatantly obvious.

  Hi Mengchih,

  You can refer to this part: X394K, 1 SAS connect for HDD power cable 4.

  

  I can't check on you, are you able to access the BIOS of the controller H700? I gave a check for part No. # you gave, it is not in the list of the R310. Did you buy it from the sale of Dell?

• iPhone 6s more stuck in the mode of the brick after downloading ios10. Cannot restore via iTunes. error 3014

  iPhone 6s more stuck in the mode of the brick after downloading ios10. Cannot restore via iTunes. error 3014

  After the update to ios10, my 5s iPhone seems to work very well. I reconnected it to iTunes and then it bricked, and I panicked.

  iTunes synced a couple of times, it took about an hour and a half for me. After that it stopped its cycle of synchronization, I unplugged my iPhone - it still bricked. I then did a hard reset and it worked.

  Maybe I got lucky, maybe my iPhone and iTunes need a kick in their buttocks.

• Can not open in safe mode / clear the cache because firefox is frozen

  I tried to load a page which seems to have had a built-in buggy video ad, and now Firefox is stuck. It stops responding, but when I force quit and reopen it, it opens the offending page, still too and it freezes again. I tried to restart my computer and reinstall Firefox and the problem continues to be. I can't follow the advice I've seen here on open mode without failure or clear my cache, because Firefox crashes before I can do it. I there a way to make these Firefox outdoors? I use Mac OS X 10.6.8 if that matters.

  Thank you!

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.