Speech recognition does not work

Similar Questions

• Speech recognition does not work in Windows 7

  Original title: Windows 7 and speech recognition

  I try to use speech recognition (Microsoft) on Windows 7. Whenever I have try and use it after a few seconds it stops working. I looked on the Microsoft website for updates or tips on the memory required etc. Any suggestions? I have the latest service pack applied. I have 2 GB of memory should I more?

  Thank you
  Anne

  Hi Anne,.

  Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

  Speech recognition does not work in Windows 7.

  The problem may occur if the microphone is not close enough to the voice or the microphone input is too low.

  Do you get any error messages?

  To check if the problem is for the above reasons, I suggest to visit:

  Why the computer does not understand my voice commands?

  http://Windows.Microsoft.com/en-in/Windows7/why-doesn

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• USB headset connected to PC speech recognition does not work

  * Original title: can not make headphones work

  I installed a software that involves speech recognition.  I plugged my USB to the PC headset, but when I tried to use Set Up microphone in the control panel / recognition speech nothing works.  I have connected the headphones to an other PC Win7 and it works perfectly, in fact I could stop using a keyboard.

  I reconnected the headset with the first PC and still nothing happens, but I see a message saying "recognition speech could not start checking the Audio devices and sound themes".  I can't find it.

  I looked in devices and printers in CP and found the helmet (C-Media USB headphone set) when I look in Properties / General there is a message "device cannot start (Code 10)".  When I check the driver tells me that the driver is up-to-date.

  When I shut down and restart the PC with headphones connected to a USB port on the front of the PC, I hear a small amount of Crackle, but nothing else.  As I have already said, there is a message on the office, 'recognition speech could not start. and "speech recognition could not start checking the Audio devices and sound themes"

  I have run Windows Update to see if there is an update there, but it makes no difference.

  How can I talk to my PC using my headset?

  Thank you

  Tregarth

  I tried 2 different USB ports on the front of the PC, no improvement.

  I also looked into devices and printers (in Control Panel), the helmet does not show.  Also, when I look in device in CP Manager there is no exclamation point in audio, video and game controllers.

  Usually, the front USB ports are connected by cables (often not armoured or not) to the USB controller in the back of a box of the desktop computer. If you haven't tried a rear USB port, please do. If your laptop no matter what USB port should be good.

  You cannot control Audio through devices and printers. You don't say what version of Windows you are using. If you use a version of Windows with a bottom taskbar, RIGHT click ON the speaker down icon to the right of the taskbar. Select the recording devices. This will open the acoustic window. You should see a USB microphone in the list. See screenshot below. Highlight the USB microphone and set it as the default. This should solve your problem.

  Marty

  

• Satellite A30: Software Dragon Naturally Speaking speech recognition does not work!

  I am unable to get the speech recognition program 7.3 Preffered Dragon Naturally Speaking version to operate successfully on my laptop Satellite A30 P4, using Windows XP as the operating system. It works fine on my PC of similar specs as the Satellite A30. Speech recognition is very poor indeed with the Toshiba laptop. He was sent to the seller twice, but the problem is still not resolved. I know that this Dragon program works fine on other laptops.

  He is also unable to play some of my CD.

  I would like to know if the portable technology is unable to operate with Dragon speech recognition, or is the problem with the A30 series or with my specific computer?

  What characteristic specifications are necessary for the performance of Dragon with success of the Toshiba A30? This microphone is necessary? How many and what types of RAM? An additional sound card can be inserted into the laptop to improve performance?

  Help, please! Anyone with experience with Dragon speech recognition? What could be the problem of CD?

  [Edited by: admin on 19 June 05 14:33]

  Hello

  It's specific software problem and it is not easy to tell what can be the problem. In my opinion, it may be that his card on this unit has no performance you want. Sorry but I have no other explanation.

  These problems can be solved simply by contacting the producer of software because they have much more experience in troubleshooting.

• Speech recognition does not match the language of the User Interface in Windows 8.1

  How can I update my speech reconition language that matches my user interface language? Thank you

  Hello

  Thanks for posting your question on the Microsoft Community.

  I apologize for the inconvenience caused to you.

  I understand that the problem with speech recognition does not correspond with the user interface in Windows 8.1

  This issue would have occurred due to some damaged system registry entries.

  Please provide me with the following information to better understand the issue.

  1. What language is speech recognition uses in the system?

  2. What is the base language that is installed in the system?

  Note: Speech recognition is available in the following languages: English (United States & United Kingdom), French, German, Japanese, Mandarin (Chinese simplified and Chinese traditional) and Spanish.

  You can also check out the link below.

  How to use speech recognition

  http://Windows.Microsoft.com/en-us/Windows-8/using-speech-recognition

  Please provide the information above to help you best.

  Thank you.

• Speech recognition does not recognize dictated.

  Recognization of speech is dictated not recognized as dictation, includes only orders. It is a novelty because when I started using it it worked fine. The microphone is very good because he always hears commands and responds correctly. Any ideas? Please, I beg you.

  Hi Mlee,

  Control Panel-> speech-> speech options Advance open pick and choose the language (English in the United States). Try the word by far.

  There are several ways to correct mistakes made during dictation. You can say "correct that" to correct the last thing you said. To correct a single word, say "correct" followed by the word that you want to correct. If the word appears several times, all instances are highlighted and you can choose the one you want to correct. You can also add words that are often misunderstood or not recognized by using the speech dictionary.

  To use the alternates Panel dialog box

  1. Click to open Windows speech recognition.

  2. Say "start listening" or click the Microphone button to start the listening mode.

  3. Do one of the following:

     • To correct the last thing you said, say "correct that."

     • To correct a single word, say "correct" followed by the word that you want to correct.

  4. In the Group of alternates dialog box, say the number next to the item you want, and then on "OK".

     Note

     • To change a selection, in the Group of alternates dialog box, say "Spell" followed by the number of the item you want to change, click 'OK '.

  Use the speech dictionary

  1. Click to open Windows speech recognition.

  2. Say "start listening" or click the Microphone button to start the listening mode.

  3. Say "open Speech Dictionary."

  4. Do one of the following:

     • To add a Word to the dictionary, click or say add a new Word, and then follow the instructions in the wizard.

     • To prevent a specific word of dictation, click or say prevent a Word from dictation and then follow the instructions in the wizard.

     • To correct or delete a word that is already in the dictionary, click or say change existing words, and then follow the instructions in the wizard.

       A speech profile has not been created. You can train your computer to better understand you by creating a voice profile that your computer uses to recognize voice commands.

       To create a voice profile

       1. Click to open speech recognition.

       2. Click Train your computer to better understand you, and then follow the instructions

          Thankzzzzz

• Speech recognition does not recognize as a word processor Open Office

  How can I get speech recognition to let me dictate in Open Office?

  http://www.oooforum.org/

  I suggest that you ask the members on the Forums of Office Open above.
  They must have knowledge of this.

  See you soon. Mick Murphy - Microsoft partner

• Download text-to-speech, but does not work

  I haved has downloaded the software neo-speech to convert the text to speech, installed, but I can't allow him to play.  I checked the box, but cannot get the sound to play.  I get a message saying that I have not installed the voice.  Any ideas?

  Hello

  See if the link below allows you to fix things.

  Click here to see

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Qosmio F750-03W - face recognition does not start and the video freezes

  I apologize for my English.

  NVIDIA 3D test shots of program wheel. Face recognition does not start.
  If the activator of the image that 3D is disturbed and I do not see the image in 3D.

  If I try the Games 3D compatible (Left4Dead) active 3D 1080 p, but the game is choppy as the test 3D image not turn on face recognition.
  3D game is to see the 2D to 3D pictures, but how do I vadere photos in 3D?

  If the Activator active 3D image quality is mediocre.
  I have defined normal and advanced, but videos have gost especially on side effects.

  Hello

  It looks like your Qosmio F750-03W PQF75C 03W001 is a Canadian model of Toshiba that I found it here:
  http://support.Toshiba.ca/support/ISG/Center/en/index.asp?S1=notebook&S2=Qosmio&S3=F750&S4=PQF75C-03W001

  First you need to update the BIOS with the latest version (at this time, it seems that BIOS 2.0 is the most recent).
  Also update the
  nVidia Display Driver version 8.17.12.9039
  Super-D IC Driver version 1.0.1613.809
  Toshiba Blu - ray Disc Player version 1.0.1.299
  as mentioned here http://support.toshiba.ca/support/isg/tsb/en/view.asp?docid=TSB001633

  If stereo 3D effects are not well use X-tune to calibrate it.
  It is recommended to use this utility to optimize the 3D stereo effects when you use the 3D without glasses for the first time or to be dissatisfied by the 3D effects.

  To use the X-Tune utility, follow the steps below:
  1. Select the language mode and optimization, and then click OK. There are three optimization modes: primary, advanced and professional. You can choose according to your own experience.
  2 sitting about 60 cm from your computer, click Start to continue.
  3. follow the onscreen instructions on each step.
  4. use the left or right side of the keyboard arrow key to adjust the effect. When you are satisfied with the effect, click on enter and then an information window appears on the screen. Press the keyboard ESC key to cancel the optimization procedure.
  5. click on Finish to close the X-Tune utility.

  You said that your face recognition does not work correctly so uninstall this software. This also with the software/driver for webcam. Once these two tools has been uninstalled, clean the registry with CCleaner and install these two tools using the most recent version.
  Restart and start X-Tune to calibrate the 3D effects.

  In the doc of Toshiba (link above), you can find this notice:

  1. the value [screen resolution] 1920 x 1080. Glasses free 3D mode is not activated except in mode 1920 x 1080.

  2. depending on the game, it does not work with glasses free 3D mode and with the 2D mode.

  3. depending on the game, it display correctly with stereoscopic 3D mode

  4. the game does not appear with glasses free 3D mode when you run drive Blu - ray TOSHIBA with glasses free 3D mode
  or run TOSHIBA Web Camera application.

  5. the performance of the game will be reduced when the game with glasses free 3D mode. If the game performance is considerably diminished, please reduce the quality of the image of the game by using parameters
  of the game. If the performance of the game are still not sufficient, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  6. small fonts in games can be difficult to read with the glasses free 3D mode. At this time, please press the PC 3D and temporarily disable glasses free 3D mode. Glasses free 3D mode is enabled if you again press the 3D button

  7. the response of the game may delay with glasses free 3D mode. If you feel it and can not enjoy the game, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  8 glasses free 3D mode can be disabled temporarily by pressing the PC 3D button, but it can be activated by playing game. At this time, please press the 3D button and turn it off again.

  9. when [enable stereoscopic 3D] in NVIDIA Control Panel is not checked, the game will start with 2D mode. At that time, glasses free 3D mode is not enabled even if you press the button during the game PC 3D.

  10 glasses free 3D mode may be turned on except TOSHIBA Blu - ray player and games. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  11. the color of the video may be different from the original during video playback with full screen on RGB and not 3D TV if [enable stereoscopic 3D] is checked. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  I hope this helps.

• Text-to-speech does not work on Microsoft Sreets & trips 2010 on Vista"

  OS: Vista/s. installed 2010 Microsoft Sreets & Trips but text-to-speech does not work. Also installed on my XP machine and it's market

  Why no text to speech using Microsoft Streets and Trips 2010 on my Vista machine.  It works fine on my XP machine.  "Is IT" did not find anything worng woth the sound system.

  Hello peacefulponzer,

  I suggest that you post your question on the Microsoft newsgroup "Streets and Trips" for a better response to your question:

  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.streets-trips

  Site of Support of Streets & Trips 2009:

  http://www.Microsoft.com/streets/en-us/support.aspx

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Micro does not work on a Satellite A200-1 of body weight

  Hello

  My laptop is a Satellite A200-1 body weight, bought in September 2007 (still under warranty). Since I bought it, it seems that the microphone does not work well.

  When I chat with yahoo messenger, people hear my voice clearly, although I speak aloud.
  I tried to reinstall the driver of sound realtek high definition, and also other web found here.
  I tried to use speech recognition, but the light also does not move and try to pass the front mic failure and vice versa, the result is about the same.

  What actually happens? Could this be a hardware problem?

  Thank you for your help

  For me it s not a fault.
  A hardware problem or a software problem

  The fact is that some of the A200 are delivered with the internal webcam and the internal mic belongs to this cam, that one of my friends talked me using the internal cam and MIC and the sound is great.
  He changed the sound settings in Skype and settings audio mic Vista and it of ok now.

• Internal microphone does not work do not

  I tried to configure my headset on my laptop to use as a microphone, and I went to configure in speech recognition. I set up the microphone to the laptop by mistake and now barley microphone picks up no sound and I can't it go back to its original state.

  Hello

  It's ok there are two ways we can solve this problem:

  (1) change the recording device by default in a right click on the sound icon in the system tray and choosing recorders (image 1). In under record you and right click on the headset option and click on set as default.

  

  

  If this does not work you can perform a restore of the system to a previous date:

  Guide: http://support.hp.com/us-en/document/c03327545

  Let me know if it helps.

• Windows XP and built-in microphone does not work

  I had reviewed similar topics, but I couldn't find a clear solution.

  My laptop is XP and has a built-in microphone.  I tried Skype and the microphone does not work.  It was not used in the past2 or 3 years, but it has been running at the same time.  Use Audacity for school work.  Can't do the part of speech recognition because I'm working with Office 2007 as it says XP and Office 2007 do not work.

  Any ideas to fix or am I destined for an external mic?  or would that even work?

  MB

  With respect to the built-in microphone, you may need to reinstall the audio drivers from the manufacturers Web site.

  As far as the webcam goes, as long as its compatible I guess it will work fine.

  Malware or virus infections can have harmful effects on a computer, even if they have been deleted. The only sure way to never remove infections from virus or malware is to reinstall Windows.

• microphone does not work with voice-dictation

  Original title:

  MIC problems

  My microphone does not work with voice-dictation in Win Vista. However, it does not work with Sound Recorder?  I went to the Hardwear and Sound but MIC is not yet in speaker properties so I can't make adjustments. Any ideas?

  Hello

  Thank you for joining Microsoft Community!

  The microphone does not work with voice-dictation.

  Quick questions:

  1. What is the brand and model of the computer?
  2 - is a built-in microphone?

  We will follow these steps and check:

  Method 1:

  Select Microphone, a default device.

  Follow these steps to do the same thing:

  (a) right click on the "speaker" icon located on the bottom right corner the screen of the taskbar.

  (b) click on sounds, click on the recording tab.

  (c) click Microphone, and then click Properties. (Note to make sure that this work appears under Microphone. If the job does not appear, click on Microphoneand then click set as default.)

   

  Method 2:

  Check if dictation is enabled or not.

  See the following links for the same:

  Turn on dictation for all programs

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-on-dictation-for-all-programs

  Troubleshoot speech recognition

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-speech-recognition-problems

  I hope that helps!

  If the problem persists, or you need help on Windows please keep us informed.

  We will be happy to help you!

• My microphone does not WORK!

  well recently ive just got on windows vista. I use to use windows xp, and as I have home premium now. My mic broke some time ago, but the sound was ok. I went to look for a new microphone and returned to find that it does not work! the microphone is now brand new, fresh out of the store. I'm looking around on the web, they say to activate sounds, but as when I press on the recording tab, it doesn't do anything. theres no microphone icon. I thought it was my microphone so I got another and yet here it will sound works but the microphone is not. Ive tested with speech recognition and does not work. pleas microsoft or one who helps!

  Sound Manager: realtek
  Headphones: Logitech

  PS: Ive looked updates and there is everything. for realtek

  Click with the right button on the speaker - click recording devices - highlight your micro - and then click Properties in the lower right.

  Or instead to highlight a few Double click the microphone there.

  You might also need to an Audio by a name Manager in Control Panel.

  The problem could be with the microphone.
  Rob - bicycle - Mark Twain said it is good.