Designjet 4000: HP Designjet 4000 no longer work after Windows update 10.

Similar Questions

• Screensaver no longer works after Windows updates

  my work to leave standby screen after a windows update

  my work to leave standby screen after a windows update

  Hey mike_5431

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  as you say cause windows update, you may need to change the way you receive updates to find the update problem

  read below

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to theInternet

  Walter, the time zone traveller

• P6-2270ea: speakers on my monitor HP 2009v no longer work after Windows update 10

  Recently, I noticed there was no sound when using my desktop and when I clicked on the icon Audio (lower-right) I was told that no speakers are connected. I checked all connections between the tower and the monitor, but nothing obvious has been disconnected. There are some speakers on my HP 2009v monitor so I couldn't understand what was going on. The monitor is connected to the desktop computer, although it does not show as existing on the HP support assistant.

  After a lot of research on websites and download updates from microsoft and HP, I found advice on your forum to download the software updates Windows 8.x. This and now my headset worked, but the speakers do not always work. Help please!

  The monitor has its own set of controls and menu and I feel that something will not sit well with Windows 10 - when I tried to use the Auto function and the menu on the screen its has already disappeared (I got the extent of noise in the headphone previuosly).  I'm not in touch with this set of controls now, in which case I will go back to no sound at all!

  Any detailed suggestions please? -I don't know much about computers so I am a little intimidated by things like open in safe mode, etc.

  See you soon

  Hello:

  See if installing the audio driver IDT W10 Gets the sound working again.

  Install and reboot the PC.

  This package provides the Tempo IDT High Definition Audio Driver for assumption of office models that are running a supported operating system.

  File name: sp71717.exe

• laptop keyboard stopped working after Windows update.

  have a toshiba satellite A505 laptop and the keyboard stops working after Windows Update reboots. We reinstalled Windows 7, which fixed the problem until the updates have come. Now the keyboard is unresponsive. Sounds like a software problem, no material. Also checked the keyboard drivers that are up to date.

  As a first response, go to the control panel, device, keyboard, keyboard Manager and right click, uninstall it and let it rediscover Windows and then reinstall it.

  It suits it much of the time.

• Applications no longer work after the update of the game store!

  In my Xperia SP applications do not work after the update from the game store and shows 15 times in one minute, unfortunately "Skype/social life/mcafee/chrome, etc." has stopped working while triying to open it. This problem is started, because I updated my phone in 4.3 jelly bean.

  My phone is ok now...

  I contacted the sony Xperia care and suggested a repair.

  And after repairing its great and works without a problem...

  The solution is here...

  Dear Mr. Jab,

  Greetings from support Sony Xperia.

  We sincerely regret the inconvenience.

  We appreciate the importance of your concerns and we are here for you help.
  In response to the request of ypur, we would like to inform to run the reapair software.

  The enforcement procedure to repair your Windows computers using software and application of PC Companion:

  Note! You should always back up all data before you perform a repair of software.

  1. Download PC Companion to sony and install it on your Windows computer.
  2. Turn off the phone and disconnect the computer.
  3. Open the PC Companion application.
  4. Select start under the support area.
  5. Select the software update feature, and then start.
  6. Not found phone is displayed. Select phone repair and Connect.
  7. You will receive a message on PC companion, that data will be lost if you continue.
  8. Check the box to confirm that you have understood that all personal data will be lost. And then click Next. The application prepares the update and if necessary necessary downloads data on the web.
  9. Select your phone model manually, and then click Next.
  10. Depending on the model chosen, you will need to perform a few steps for the update for PC Companion be able to update the phone software.
  11. Yet, do not plug the phone! Note! At this point, the phone must be turned off and disconnected from the computer.
  12. Connect the USB cable to the computer, not on the phone.

  13.Xperia: then just pressed the button indicated, connect the USB cable for device theXperia and keep holding and pressing the indicated key until your device update started... appears (in some cases installation drivers appears first).

  1. If you have not correctly, do the phone turns on and proceed to the next steps, drag the bottom of the convening of the notification bar.
  2. In this case, disconnect the phone from the cable, turn it off and repeat step 12.
  3. Follow the instructions on the screen. Once the repair is completed, unplug the unit and then restart the device.
  4. Click on Next. If the repair was successful, the message this device has been updated successfully is displayed.
  5. Click Finish.

  Please contact the Support of Sony Xperia.

  Looking to better serve you.

  Kind regards.

• Pavilion DV6-2010sf: HP Pavilion DV6 Sound no longer works after Windows upgrade Windows 7 10

  After upgrade to Windows 7, no noise, even with icons on the screen at the bottom left and keyboard sound ON display.

  ATI driver high definition Audio Device was running OK.

  Audio CODEC IDT High definition driver was NOT working and unable to do so.

  I ran Windows Update but who has installed a new version of the drivers and Audio CODEC IDT High definition driver now works OK, still no sound even with icons indicating it is under tension.

  The HPSupportSolutionsFramework of the HP utility that is supposed to help can be downloaded: 10 seconds after download starts, it will stop ith error notification (and no explanation).

  Any help welcome.

  Hi @JFR77,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6 Notebook and no sound after a updated Windows 10. I uninstall that I listed in the audio, video and game controllers first and reboot the laptop. Then download the driver Audio IDT high definition (HD).

  You can try:

  1. a click right icon "speaker" (right)
  2. Select playback device
  3. click right speakers
  4 activate and as default
  5. click apply/OK

  Here is a link to troubleshoot the sound.

  Please let me know how it goes.
  
  Thank you.

• Microsoft Word no longer works after Vista update

  Hello

  MS Word has stopped working immediately after Windows Vista updates automatic.

  When I try to run Word, it opens, but I can't perform tasks of hormaux in the document and when I try to close (or save) I get the message "Microsoft Word has stopped working".  The system diagnostics are unable to solve the problem.

  I have a Dell Inspiron 1525. 32-bit operating system.   Windows Vista Edition Home Premium.

  Thank you
  Dora

  Hi Aldous and others

  I have the same problem and resolved to mark a change in the registry as indicated in this article, http://support.microsoft.com/kb/921541/en-us

  I restart and open and reopen and it works fine so far.

  Hope it help you too.

  Best chance

  Kenneth

  Sorry for the bad spelling :-(

• Keyboard does not work after windows update

  The keyboard of my laptop S series suddenly stopped working after that she completed an update of windows. Another strange thing is that the wireless only turns off even when the laptop is turned off. Everything else seems to work fine except for two things.

  First thing I did was to restore the system back to before the update of windows, but nothing has changed. Then I tried to uninstall the keyboard driver then by restarting the computer, after which it automatically reinstalled the driver but the keyboard still did not work.

  Then I "refreshed" system, but nothing has changed then either. And finally, I reset the factory settings and for a little while, the wireless light turns off, but then he came back even if I had not turned on the laptop. (Update: I just changed the laptop and the wireless light disappeared so... If all goes well he will not return as a sign of improvement.) There was no change to the keyboard.

  Additional details on my laptop that may or may not have something to do with the problem:

  It is currently running Windows Pro 8 on a 64 bit system and is less than a year.

  I accidentally spilled tea really diluted on the laptop a month ago, but the laptop was working again fine until windows update a few days ago. There is no significant problem caused by the spill other than a few sticky keys who take off on their overtime and that the sensors of the keyboard backlight no longer works correctly.

  Any advice on what else I might be able to try to try to again take the keyboard in a usable state would be great.

  Hi rhel!

  If the keyboard still does not work while in the BIOS, then it means that you have here a hardware failure, and the only way to solve that is to have the repaired computer. You can visit this page to start the repair process.

  -Tim

• Wireless card doesn't work after Windows Update

  I have a Compaq Presario F730US with Vista. I have installed Windows Mobile Device Center on it, and the computer has stopped recognizing wireless card. Then, after trying to restore the original drivers and do several other things, I have done restore the computer originally installed at the factory.  The wireless worked well.  However, as soon as I updated all Microsoft Updates and before installing Windows Mobile Device, the wireless card no longer works again.  I restored the drivers, and it worked the first time.  Then a few other updates came through, and I can't get working again.  Any suggestions?  It's a Broadcom Wireless card. I saw that a gentleman has been upgraded for its presario to Windows 7 and had the same problem on another post and never had resolution.

  The normal rule is to never accept update from Windows update device driver.

  Always bring the manufacturer.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

  Change the Update Auto Update settings for ' check for updates but let me choose etc "> OK".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• The mouse scroll wheel stopped working after windows updates

  I have a Targus optical mouse with a scroll wheel; and he recently worked like this: when you use the scroll wheel in multiple windows, it would scroll the window (to move the vertical scroll bar) goes up and down.  It was a huge time saver, and I was used to it.

  I installed recently a whole bunch of patches from microsoft, including Windows 7 SP1 and Microsoft Mouse and keyboard Center.  The device is not listed in the center of the keyboard and mouse MS, but there is always a control-> mouse Panel.

  In Control Panel-> mouse, it has still the tab saying "wheel" roll the mouse to a notch wheel to scroll the rows x number of rows (it is selectable, I had 3, but tried to change as well); but it no longer works.  Now, it seems, I have to press the wheel to click, which then shows a circular scroll up/down, icon, and then I physically move the mouse up and down, and if I push down to click again on the wheel, I'm back to a regular movement of the mouse pointer.  It's MUCH more inefficient than the use of the wheel, so I'll try to figure out how I can get the drive working again.

  Should I uninstall MS Mouse and keyboard Center?  I thought about uninstalling and reinstalling the driver; but there is no mouse listed in the Device Manager (only has my touchpad there...)  It's a Targus optical mouse amu10usz; and even once, it was working fine before the installation of upgrades...

  Thanks for any help,
  A.J.

  Hello

  What is the number and the model of the computer?

  I will suggest you to check the mouse with different USB port or another computer, still question remains the same! Follow the mentioned methods:

  Method 1:

  Step 1:

  Update driver mouse

  a. click on start.

  b. click on Panel.

  c. using the drop down next to the opinion of: in the upper right, select large icons.

  d. click on mouse.

  e. click on hardware tab, click the Properties button.

  f. click on the driver tab, click set to update driver.

  Step 2:

  Uninstall the recent update and look for the question. You can first of all uninstall the update MS Mouse and keyboard Center and check.

  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  Method 2:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:

  The problems with the mouse button or scroll the parameters

  http://support.Microsoft.com/kb/303091

  I hope that helps!

• Qosmio F750 - touch buttons does not work after Windows update 10

  I use a laptop Qosmio F750 (PQF75A-02Y00Q).

  Installed on the computer the previous operating system was Windows 7 Home Premium 64-bit. Then, I upgraded the operating system to Windows 64-bit edition 10.

  As expected, this change would cause problems to appear. The thing that is really bothers me right now is that the touch of the keys in the top right of the keyboard do not work as expected.

  The buttons respond always if you touch them, but they do nothing on the screen. for the most part. When I touch the Volume Up / Volume keys down, they work as expected. However, the key Mute, the button Play/Pause, the Wifi key on / off and Mode (as well as the key to toshiba bulletin board) eco button do nothing.

  Curiously, when I manually turn eco mode from the power settings mode eco button again turns the green.

  My last question is, how can I fix this so that ALL keys work as expected?
  
  -----------------------------------------------------------------------------------------------------------------

  I noticed that the recognition facial webcam was funny things as well, but everything what needed to be done was to recalibrate the installation for that to make it work again.
  Curiously, all the FN key functions work well.

  In addition to the question in bold, there are all the other drivers should I install to improve/restore functionality to my laptop? As the page of Windows 8?

  Hello

  I have the same problem since update 8.1 and now after 10 update, even more I lost the 3d display function since I updated to 8.1.
  MY QOSMIO is PQF75E-F750

• X 500 - 10W QOSMIO webcam stop working after Windows updates

  Hello.

  I have a Toshiba QOSMIO X 500 - 10W PQX33E-00R00CIT.

  When I format my laptop and you reinstall the operating system Windows 7 Ultimate 64 bit, the webcam works perfectly.
  After I updated windows via windows update webcam stops working. Also with Windows 10 company LTSB. What should I do? Thank you.

  P. S.
  According to me, is just a problem of software, not hardware. The webcam works perfectly until I do the windows updates! ' * ' Microsoft!

  I find the problem. Do not install the latest version of Microsoft Silverlight. I hope that I formatted my computer for the last time!

• Laptop HP - 15-r213ns: hotkeys (keys of wifi sound, brightness), does not work after windows update

  Hello

  I have a HP laptop - 15-r213ns (ENERGY STAR) with windows 8.1

  Last night, after an update of windows, the shortcut of the brightness (F2 and F3) volume (F7 and F8), wifi (F12) and keys all others have stopped working.  I can always change the brightness and volume using windows, but I can't do more using the keys.

  The function keys are working, as refresh F5 or F3 Browse. I noticed that before I had to press the FN key for this and now she does without the FN + Fx, so I guess that the update of windows must have changed something here.

  They used to work fine before the update. I reinstalled the display drivers (NVIDIA G-FORCE 820 - M) and looked for new drivers or update drivers using HP Support Assistant, but everything is up-to-date.

  I was looking for hot key factors in the page of HP drivers for my product but could not find any keyboard, drivers or software related shortcut keys.

  any suggestions?

  Thanks in advance,

  Marco

  Hi, Marco:

  The system of the event utility is supposed to get the Fn keys to work.

  Details:

  This package contains the HP System Event utility for the laptop models running a supported operating system. HP System Event Utility allows the special programming function keys.

  File name: sp70439.exe

  You can find this file in the Software - Solutions section of the driver for your model page.

• Satellite C50D-A-12 x - touchpad does not work after Windows Update

  the touchpad does not work after the windows updare

  I always recommend you read other threads / messages and spikes before considering opening new thread in the forum
  https://Forum.Toshiba.EU/showthread.php?82878

• Re: Satellite L500 - Wifi does not work after Windows Update

  The wireless on my Satellite L500 worked perfectly before you update windows. However, after the updat when you try to connect to a wireless connection, it says that "no connection is available.

  I then clicked on fix to try to find a solution. Then the message "the diagnostic policy service does not work. Using Ctrl + Alt + Delete I went on services and attempted to start the DPS manually, but the message "Diagnstic political service on Local computer started and stopped. Some services stop automatically if they are not in use by other services or programs. »

  This message puzzled me enough as it is said that the Wifi is infact on however in a attempt to FN + F8 F8 option does not appear. Any help would be greatly appreciated.

  Hello

  For Satellite L500, there are already some threads here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=186764
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=178629
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=188577

  Additionally, make sure that the DHCP and DNS services are running. Type of startup is set on "Automatic" and try to restart both services.