Speed switch "Aero" of Windows 7 in a dual configuration monitor
I use two monitors for the job estimating software. One is 24 "the other 47". I have problems with switching between windows sometimes because I can't get on the side of the large monitor to the opposite side of the small monitor before her mask the window on the other. I turned the path of the mouse to the top speed to try to beat him, but this causes the same problem, because it is easy to shoot and the TI switches again. Is it possible to use "Aero" and slow down the speed of switching?
Hello
I suggest you to go through the Microsoft article and check.
Move windows between multiple monitors
http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors
Work and play better with multiple monitors
http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors
Tip Windows 7: function Snap Aero and multiple monitors
I hope this helps.
Tags: Windows
Similar Questions
-
How to change the speed of playback on Windows Media player?
Original title: slow down the Windows Media feature?
Is there a slowdown function to allow me to slow down or speed up a song? I use Windows 8
Hi Andy,.
Welcome to the Microsoft community.
I would like to give you some information:
You want to adjust the speed of playback of multimedia content on Windows Media player?
If you try to adjust the speed of playback on Windows Media player, you can follow the steps:
(a) click on Switch button playing in the lower right of the player.
(b) right click on a space open in the player (such as to the left of the stop button), point to enhancements, and then click play speed settings.
(c) move the speed slider to play at the speed that you want to read the file, or click the slow, normal or fast links.It will be useful.
Let us know if you need help on issues related to Windows. -
In this case all that is display of each tab. For example, if I open it, say, 8 new tabs by default it takes about 5 seconds to switch between them, although all that they show are links to my sites top of page 9. I also noticed a new tab opening takes more time more I already opened. The problem is particularly well with the tabs. Navigation is not just slower than usual and as I said above, switching between Firefox Windows in not affected.
If it works in Mode safe mode and normal mode with all extensions (Firefox, Tools/menu key > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.
Close and restart Firefox after each change via * button '3-bar' menu > exit (Power button)
- Windows: File > Exit
- Mac: Firefox > quit Firefox
- Linux: File > exit
-
How to switch between multiple windows in the same application?
Hello
I use OS X Capitan version 10.11.13 and I'm trying to find an easy way to switch between multiple windows in the same application by using CTRL + alt or different keys.
Here is what I feel...
Let's say I have Outlook, Google Chrome, Safari, iTunes and apps 'about this Mac' open.
I open the new message window in Outlook and another Chrome window. I have therefore 2 separate windows in Outlook and Chrome.
With that, I'm unable to move the composition and the window main outlook which is so annoying. Let's say I want to read the emails by the prospect main window and transfer of the content of the compose window! The command + tab doesn't take me to the main window of Microsoft outlook! Even if there were the last visited / applications window. This constraint is not intuitive, unless it can be configured in the settings?
Strangely, I can't switch to the "about this Mac" window.
The work around is to use the function (F3) mission button and click on the window, that I want to use or click the "Outlook" application on the dock icon and choose the window in the list.
Does anyone know how switch between different windows in the same application by using a key combination or one another method other than listed above?
Thank you
Avinash
In general, an Application that can open multiple windows provides a "Windows menu" you can choose the window you want.
-
My laptop HP-R015TU is not suuporting theme Aero in Windows 7. I am also unable to change brightness because I find could'not brightness change option anywhere. I am facing this problem after reinstalling Windows 7. I installed all the drivers, but I could not find suitable for my laptop HD graphics card driver. I tried most of the HD graphics driver suitabel for my laptop (with the help of find utility device HP) but no one worked for me and the installer says "this computer does not meet the minimum requirement to install the software.".
Please help me find the right driver HD for my laptop if this is the cause of the problem or suggest me another solution to solve the problem.
Thank you!
Hello
Try the following.
Download and reinstall the Chipset driver at the following link.
http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69575.exe
When this has completed, restart the laptop.
When windows has reloaded, try to install the graphics driver directly from Intel on the link below (3rd on the list).
https://Downloadcenter.Intel.com/download/25588/Intel-graphics-driver-for-Windows-7-8-1-15-36-
If this completes Ok, restart the computer again.
Kind regards
DP - K
-
How can I set up Vista so that the PC does not switch to another window (for example the Spy Sweeper alerts) while I am playing a game?
Vista is not in control of this technique. Spy Sweeper needs to have an option to control that. If this isn't the case, then it is badly programmed. Flight of focus (go to another window) when it is actually needed is a big no-no for the design. I find this option, if I were you :)
-
Software to switch between open windows on a necessary timer
I need a software to switch between several windows open on a timer. It will be used for a monitoring station in a manufacture of fixtures to leave the hands free, surveillance of several sets of information that are in different windows. Anyone know where I can get such software or how even pick him up? I search the web using 'scroll open windows' 'as alt + tab' 'timer switching window focus.
Any help would be appreciated.
Brian
Hello
Please use your favorite search engine to look for such software.
THIRD WARNING:
Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk. -
Original title: PrintMaster 2012 PlatinumBasic
After you install the above program, I am not able to open it. I get a message saying that the color scheme has been changed from Windows Vista Aero to Windows Vista Basic. However, the program is still not open. Any ideas on what I should do?
Hello
1. is the issue limited to the program Print Master 2012 base Platinum?
If you receive a message that some Visual elements, such as transparency, have been turned off or if you receive a message that the color scheme has been changed to Windows Vista Basic, one of the following might have happened:
· A program that you are using is not compatible with the Windows Aero color scheme. When you run a program that is not compatible with the Windows Aero color scheme, some Visual elements are automatically disabled. When the program is not is more running, the Visual elements that have been disabled will then automatically lit.
· Your computer does not have to have enough memory to run all of the programs that you have open and also run the Windows Aero color scheme. Try closing some windows or changing your color scheme to Windows Vista Basic. If Windows automatically changed your game of colors in Windows Vista Basic, and you want to change it back to Windows Aero after closing some windows, follow these steps.
See the link below:
Why are some Visual elements will automatically turn off?
Also, check the link:
Solve problems with Windows Aero
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero
Note: you can use the fix tool automatically to diagnose and fix problems with Aero effects
-
Aero in Windows has stopped working
I am running Windows Vista Home Premium with Service Pack 2. Aero in Windows has stopped working. When this happened once before going to the control panel > change the color scheme and selected Windows Aero, but now this option is not listed. Checked the help and as advised checked my screen resolution and I saw 32-bit color, the verified value Advanced Configuration monitor and I saw this refresh rate is 60 Hz. Then forums got advice to run sfc/scannow and it came back and told me to Resource Protection Windows did not find any breach of integrity. Finally, taking advice to check that the graphics card by going to Device Manager but no device had anything by them which suggests that they do not work.
Help the old windows look terrible after using Windows Aero
Brett
Hello
Make sure that you are logged on as ADMINISTRATOR
My Vista Aero Glass is turned off, how can I enable them again?
http://www.howtogeek.com/HOWTO/Windows-Vista/my-Vista-Aero-Glass-turned-itself-off-how-do-i-enable-it-again/To the need to update or reinstall the video driver (it's a good idea in any case).
Solve problems with Windows Aero
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-AeroHow to enable or disable transparent Aero Glass on Vista
http://www.Vistax64.com/tutorials/75413-Aero-Glass-transparency.html--------------------------------------------------------------------
This utility, it is easy see which versions are loaded: (updated video/Display drivers and others)
According to the needs.)-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
each driver in the list, additional useful information is displayed: load address of the driver, description,.
version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Always check in the Device Manager - tab drivers version you install actually shows up. This
because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
pilot - reboot - check that it is installed and repeat if necessary.Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Windows Aero on Windows Vista does not!
I have Windows Vista Home Premium. I have Windows Aero, since I got the computer in 2007. All of a sudden, Aero stopped working. I went to the customization in Control Panel and click on "Color and appearance of windows" and the "Appearance settings" window appears instead of the original from Windows color and appearance window. On the color Windows Aero system is not listed. System Restore has been tried three times with no success. What should I do?
Hello
My Vista Aero Glass is turned off, how can I enable them again?
http://www.howtogeek.com/HOWTO/Windows-Vista/my-Vista-Aero-Glass-turned-itself-off-how-do-i-enable-it-again/To the need to update or reinstall the video driver (it's a good idea in any case).
Solve problems with Windows Aero
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-AeroHow to enable or disable transparent Aero Glass on Vista
http://www.Vistax64.com/tutorials/75413-Aero-Glass-transparency.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Switching between the Windows icon
This icon which is on my toolbar is not preforming as he has done in the past. When using my desktop displays icons indicating the active windows, instead of cascading screens. Any ideas how to change the settings to change this back.
Hello
You must have active AERO to make it work as you want. You can try a Restore Point to
When he was working or resets AERO back to active state.How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-
How to turn on or off transparent Aero Glass on Vista
http://www.Vistax64.com/tutorials/75413-Aero-Glass-transparency.htmlHow to enable Windows Vista Aero Graphics
http://www.Petri.co.il/enable_windows_vista_aero_graphics.htmVista: Enable or disable Aero Glass transparency effect
http://www.tech-recipes.com/Rx/966/vista_enable_or_disable_aero_glass_transparency_effect/Activate Vista Aero in Windows Vista Home Basic
http://www.gHacks.NET/2007/05/13/enable-Vista-Aero-in-Windows-Vista-Home-Basic/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
I have a intel 915gv chipset that will not run aero. If I want to run windows 7 can I just disable without video problems?
It is very simple to disable Aero in Windows 7:
Right click on the desktop
Click Customize
Under ' Basic and high contrast themes, click on "Windows 7 Basic.
Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com -
Impossible to get Speed Carbon running on Windows 7
I need speed carbon and running windows 7, the game becomes ea Announces and then it just goes back to my desktop any ideas?
-----------------
-
I lost the function of transparency aero theme windows. How can I get him back?
I tried to install windows 8. My video card does not support it. Because of this action, I lost transparency aero for windows themes. I was not able to bring him back.
Hi Rebecca,.
Welcome to the Microsoft community!
You may not use the Aero feature.
There could be problems with graphics drivers.
To work with the issue, I suggest you follow the steps:
Method 1: Run the Aero Troubleshooter
Visit the site:
Open the Aero Troubleshooter
http://Windows.Microsoft.com/en-in/Windows7/open-the-Aero-Troubleshooter
Method 2: Update the graphics drivers
Visit the site:
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
I hope this helps. If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.
-
Can I switch to official Windows 7 Windows 7 RC?
Can I switch to official Windows 7 Windows 7 RC?
going to have to buy it when it came out, and apparently there is not an option to upgrade but don't have to do a clean install.
Maybe you are looking for
-
The Participation14.0 of HP customer?
The HP part 14.0 Cust regains 281MB, my computer is slow delete this space requirement?
-
I get the error code 646 when I try to install windows updates.
I get the error code 646 when I try to install windows updates. I have Windows Vista Home Premium. I disabled my firewall and I still get the error code 646.
-
Unknown device for Envy 13, drivers needed!
I gave my laptop a facility clean and formatted the disc (thereby losing the drivers). So far, I've installed all the drivers downloaded from the site of hp to win7 64 bit with success, except a single device is still unknown. The error code is 28. T
-
want to 7640: output file scanner type
Is there any file, select it with the scanner type or PDF only available? JPG would be nice to copy photos!
-
BlackBerry software get installed and opens but not office?
Carefully followed the instructions and the latest get is on my passport and my win7 desktop. Dblclicking on the implementation of office get he gets up, running and then he finds the passport and labels it correctly... But he does "then logs? When I