Speed WRT54GL and giga?

Similar Questions

• I'm reading the data (speed rate and flow) of a table and it plot in a graph.

  I'm reading the data (speed rate and flow) of a table and it plot in a graph. I need to draw two values of l/min (speed) to the same speed. How can I do using a loop for?

  There is no need actually to use a loop FOR this. And using a graphic waveform isn't the type of field for this, for a waveform you a (Start), the dT T0 (greatness not) and table D (Data), this isn't what you want unless you know precisely the measure will take place according to an orderly disposal, you'd want a xy chart so that you can trace the measures where they occur in the axes X and Y of preference.

  

• WRT54GL and Xbox Live

  Hey there everyone.  Lately I had problems with my WRT54GL and Xbox Live.  When I try to connect to Xbox Live, it fails.  When I do a network test to check what the problem is, it says that I'm connected to the Internet, but I can't connect to Xbox Live.  I have opened the appropriate ports on my router and have even tried to put the Xbox 360 on the DMZ.  No solution helped.  I also tried to disable the firewall router SPI and its SecureEasySetup.  Still no luck.

  I powercycled my all network equipment and called my ISP (Time Warner Cable). My ISP says that the problem is not on their end.  I plugged the 360 Wireless at first, but also tried plugging it directly into the router.  Xbox always gives me the same error. The only thing I can not try connect the 360 directly to the cable modem.  When I got my service installed in my new apartment, I forgot get address MAC connected to Time Warner Cable of 360.  Normally, this is a problem since the router's MAC is the only one that matters. However, this also means that I can't connect directly to the modem to see if it is really a router problem.

  If anyone knows a place or how to get it to work, I'd be very happy.  I know that the WRT54GL is not certified with the little "Xbox Live Compatible" stamp, if I need to get a new router is not totally out of the question.  I wanted just to eliminate any possible problems that might arise before that.

  Connect the router directly on your computer with an Ethernet cable, then download this to your desktop.

  Open your browser and type "192.168.1.1" with the URL of the box, the two username and password should be "admin" unless amended.

  Now, navigate to the administration tab and find the update of the firmware, and then install the file that you put on your desktop.

  You now need to reset the router, press and hold the reset for 30 seconds button and unplug the power cable for 1 minute.

  Log in to the router DHCP enable/change, 20 Mhz, SSID, channel 11 - band Radio 2.46Gh, then work on getting your security put in place again.

  Go into the settings advanced wireless
  Change the tag to 75 interval, modify the threshold of fragmentation to 2304, change the RTS threshold to 2304, now save the settings.

• Y at - it a utility to monitor the speed, temperature and cpu/gpu for desektop m9200T fan?

  My desktop running Win7 Home Premium m9200T computer crashes often.  It seems to be associated with temperature.

  I tried SpeedFan, but my computer crashed whenever I ran it.  The SpeedFan 20 window scroll a few lines of text that the computer crashed.  Y at - it a utility to monitor the speed, temperature and cpu/gpu for desektop m9200T fan?

  PC Wizzard works well on my computer.

  Thanks Big_dave.

• can be used for high speed changes and effects iMac?

  Hello.  Can someone comment on what made them decide to use an 8 or 12 cores Mac Pro for effects and editing?  I ask because I can get 100 megabytes per second bitrate, and the iMac works fine with that.  17, 000US Sony Cinealta 4 k which has not been published, produced a 2.4Gbps bitrate max and I can get 100 MB/s stable, which is 0.83Gbps, or 35% of the Sonys transmission speed for 1/7 the price for the sony, and I get 4:4:4 to 14 bits, while the Sony is 4:2:2 10-bit.  Is the benefits of Mac Pro especially for adding effects?  I'm confused.

  YYou you need a RAID in support of media at this data rate, especially if you have multiple video and audio streams.

• speed dial and fax numbers

  I'm selling my HP Alll - in - one Pro L7500 printer.  Once the printer is uninstalled the computer make the short code and fax number remains in the printer?  Should I remove them?

  Grammy8568

  Hello grammy8568,

  Welcome to the HP Forums!

  I understand that you do not want to delete fax speed dial numbers. I will do my best to help you! You need to remove the fax number on your printer, follow these steps:

  1) press the Setup Menu

  (2) select speed dial Configuration

  (3) select delete Speed Dial

  Please let me know if you have any other questions.

  Have a good night!

• Computer, speed up and slow down

  When my computer is turned on, which is practically all the time, I guess it's the rear cooling fan, but permanently, it slows down and accelerates

  and it's driving me crazy.  Most of the time when I do not use, I just stopped him.  I was wondering if anyone has any suggestions

  what I need to do.  Thank you

  Hi smileyboy,

  Fans generally increase speed (assuming you have a temperature fan control chip) when the inside of your box reaches a certain temperature. Once the heat has been dispated the fan speed will reduce again. This is what normally happens. If the fan speed is monte and descends without particular reason so it could be the chip temperature is causing the problem or the fan may be faulty. anyway a repair technician would need to watch it.

  Before you do this, however, try to open the case. I guess that we are talking about a desktop PC? If it's a laptop take it to a repair shop, access to the fan in a laptop is quite difficult if you don't know what you're doing. As I said, if it's a desktop computer, remove the side panel (initially with the machine turned off - remove the plug of the power supply and the rmemeber to yourself before you touch anything inside the Earth). Now look at the fans. Is there an accumulation of dust/dirt on the fan blades? If so gently brush the dust with a small artist, own brush. Check also on the processor heat sink. If dust has accumulated in the heat sink tips then purge with a can of clean air. Try running the machine with the cover to see if additional air flow solves the problem. Your PC may be overheating causing the fans speed up to cool thing down. Listening to the fans to see if you can isolate which fan is the source of the problem. You'll have a fan on top of the CPU (porcessor); You can also have a hood on the back of the case. Another fan is located in the power supply (power supply). Power supply fans, however, must be examined by a qualified technician.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• Speed range and wifi.

  Hello

  I wonder where to find documentation (wikipedia or something) on the concepts.

  • You can get a longer range if you change the speed of 54 Mbit/s to 11 Mbps.
    Is this true?
  • I can't to 11 Mbps Wireless B or G WiFi?
  • If I place an AP in speed of 2 Mbps, which means that if I have 10 clients, each client
    can download it at 2mbps? Or the download speed will be 2mbps / 2?

  I tried changing from 54 to 11 Mbit/s and I can confirm that you get more range and improved stability

  in the external situation. But need some evidence of Linksys or another site.

  Thank you very much

  Oliver

  Check out this Web site and I think this will answer all your questions.

• WRT54GL and Windows 7 log in question

  I have a network of several PC on my WRT54GL router - firmware 4.30.14 building 5, October 26, 2009

  All PC's are XP SP3 except a Win 7 PC

  When I access my WRT54GL from all of my XP computers, I connect at once and I'm done. I can access all the pages then configuration.

  When I connect with my Win 7 computer, I get the security pop Windows window whenever I click on a page or a new tab.
  I can see all of the pages and tabs without problem once I get the password again, but it's really annoying that he keeps asking

  for the log information for each new item, I click on.

  Checking her memorize my box of credentials is not good, it always ask again and again

  This is my first Windows 7 computer, not sure how to stop this behavior annoying.

  Any help on this is appreciated

  This is the window that will open all the time

  

  Update

  This seems to be a question of IE9

  I saw just the router with Firefox and Windows 7

  He only asked for username and password once and I was able to browse all the pages without further asked for info, log in.

  I'll go ahead and mark it as a solution because it seems a problem of IE9

• Speed max and the capacity of RAM of Pavilion dv6

  Hi guys,.

  I don't know, you have been asked before, but each post I find little answers my question, but not exclusively:

  What is the maximum speed and the RAM capacity can put in my Pavilion dv6 (Beats edition)? Completely factory standard

  I want the fastest and most large amount of RAM I can get (I'll make heavy photo editing) and then I put a SSD in as well?

  HP Pavilion dv6 Notebook PC

  Windows 7 Home Premium 64-bit Service Pack 1

  Intel Core i3 - 2330 M CPU @ 2.20 GHz

  RAM:

  Slot 1: 2 GB SODIMM Hynix 1333 MHz

  Slolt 2: 4 GB SODIMM Samsung 1333 MHz

  Radeon (TM) HD 6490 M

  Motherboard: 17F9 10.5 A

  BIOS: F.1B

  Sincere greetings

  Justin

  You are the very welcome, Justin.

  Yes, that's correct. 2 x 8 GB PC3-10600 memory.

  Memory will not run any more quickly than the FSB of the processor. Your CPU FSB is 1333 MHz.

  For example: If you have installed 2 x 8 GB PC3-12600 (1666 MHz) memory, he would go only to 1333 MHz.

  I don't think that there is no outside but except DDR5 memory in video cards.

  But you can not mix DDR memory types, because they work with different voltages and the notches are cut at different places on DDR, DDR2, and DDR3 memory modules to prevent someone to install the bad memory in the PC and damage memory, motherboard or both because of the different voltages they run on.

  Best regards

  Paul

• Speed Dial and text forward

  I put all my impossible speed dial but when I press the speed of dial the number on the touch screen, nothing happens it just made up that single-digit I pressed on and not the # assigned

  I also still no figures on how to send a text

  You must hold your finger press the dialing speed assigned for several seconds, and then it will call the programmed number when you remove your finger.  You can experience all the keyboard first.  When you have that down, then try the subset of the keys on the screen of dial pad.

  If you have not changed it's default value, you can start with the number 1, which is pre-programmed to call your voicemail.  BTW, you don't have to enter the alternative transport mode for the keyboard.  Simply having the map screen or dial pad up when you press and hold a speed dial.

  Alan G

• Speed control and sound Pitch

  "" So, I have seen an example of how control his Pitch and speed in ActionScript 3.0, Andre Michelle "Blog Archive" Pitch MP3, but in this example the speed and pitch are controlled together. Is it possible to control them individually?

  You can control individually - watch in the responses to the #6 and #17

• Lost after update... I have usb with the backup file to collect on it, how I use it to get back to speed dial and the history of the details for the 2 different versions of Firefox

  New version of Firefox result... No favorites especially No speed don't dial loads of them...

  Which may have been generated through:

  • http://KB.mozillazine.org/mozbackup

  It was the best resource that I could find.

• measure the angular speed, angle and trigger using a gyroscopic sensor breakout board and LabView data acquisition

  How to measure the angular velocity, the angle and trigger using a gyroscopic sensor breakout board and LabView data acquisition?

  There is a single channel data acquisition code which measures the angular velocity, angle and flexibility using a gyroscopic sensor breakout board and acquisition of LabView data attached to this, I need a help to creat two-channel data acquisition code?

  Hello

  Attached is a vi that you can use in order to read the measured angular position of an encoder.

  If you need more examples on the tasks that you can develop with NOR-DAQmx and LabVIEW, you just need to open LabVIEW and click Help > find examples > Input and Output material > DAQmx > entry counter.

  Kind regards

• Module speed FPGA, speed controller and timed loop speed

  Hello.

  I'm developing an application to acquire an analog signal at 800kS/s. Budget does not seem to be enough buy material excess spec. So I have to be very very accurate on all components. I had a look on the site and selected the following materials.

  9221 8 module capable analog channel on 800kS/s sampling. I don't know if this sampling rate indicated in the specification of the module means that it can acquire up to 800kS/s or is the device samples ADC sampling rate to which the machine don't maybe not to the criteria of Nyquist and the module can perform sampling to 1.6MS / s is necessary which I think is not available?

  9012-400 MHZ controller controller. If I put a while loop inside a VI under the RT target, it runs at 400 MHZ by default provided there is no code inside? Is so I could definitely use loop time express vi for sampling at the required level.

  What of the timed loop? I just developed a project of RT and added vi under the RT target. The timed loop default clock frequency is 1 kHz and I can't select more than 1 MHz?

  9112 chassis. Default clock 40 MHz. same rate issue which concerns the 9012 above controller.

  Kind regards

  Hi AustinCann

  If you need to acquire 800 kech. / s, then the module module-9221 will be able to do this, if you are using only 1 channel, that is.  The module using a global sample, therefore the maximum rate will be distributed on channels that you use.

  If, however, you have to detect the frequency of > 400 then you would need a higher sampling rate to detect these, as you mentioned.

  The controller processor runs at 400 MHz, even though the loops in your code will not run at this pace.  On the target in real time, you can use a timed sources of clock - usually 1 kHz to 1 MHz - and set the period in terms of the chosen clock.  If you need faster line rates, you can still code directly on the FPGA.  The CompactRIO Developers Guide is a comprensive document and deals with most of the concepts of RT and FPGA.

  The best course of action would be to contact your local office, because they have all the resources necessary for the specification of your system.