Framework\v2.0.50727\ could not be loaded

Similar Questions

• The class or interface 'flash.utils.ByteArray' could not be loaded.

  Hi all, I am using some of the new functionality that is available in AS3 and I get an incomprehensible error message. The code I use is at the bottom of this post.
  
  No matter what I do I get the following error when I compile this code
  
  The class or interface 'flash.utils.ByteArray' could not be loaded.
  
  And the line of the source is
  
  var pixels: ByteArray = srcBmp.getPixels (new Rectangle (0,0,imageWidth,imageHeight));
  
  Everyone can see what I'm doing wrong here? It drives me crazy!
  
  
  

  I AM THE ULTIMATE SADDLE!

  I finally thought to her, you can tell I'm new to Flash!

  In any case, I assumed that by selecting ActionScript 3.0 in my framework of Actions then this ias version that would be used when the movie is exported. However I discovered that I should also have been affecting the ActionScript 3.0 version in the page settings to publish to. I feel like such a fool!

• Upgrading to Windows 7: compatibility of the device data could not be loaded

  I tried to upgrade my L300 (and otherwise my P300) from Vista to Win 7 with two DVDs of upgrade provided by Toshiba end 2009. I followed all the instructions, as to recover the system to the State of delivery, deletion of outdated drivers and install new drivers with the DVD driver. But when I insert the Win 7 DVD and start the installation, I soon get the following (originally in German) error message:
  "The device compatibility data could not be loaded. Error code 0x1F.*.
  German support Toshiba could not answer my question so far, then I wonder what is the problem and how do I get my installation is going. It's kind of frustrating after paying for the upgrade DVD, but the installation does not work.
  Thanks in advance for any help on this error.

  And after a year using it for the first time now, right?

• Graphic driver could not be loaded on Satellite A300-1 b 9

  Hello

  I just bought A computer series laptop two days back.
  It works well, but today I noticed that the driver to the Standard VGA Graphics Adapter could not be loaded (in the Panel report of problems and Solutions).
  It also shows that there is problem with a generic driver installed.

  Otherwise, the computer works very well and display is excellent.
  I don't know what it takes to these problems.

  Please suggest me some solutions.

  Thanks in advance!
  IBE, Finland

  What model of laptop do you have exactly?

  This information would be useful to get a graphics driver to the right of the page of the Toshiba driver

  But to be honest, in my opinion, this notification is not a serious question

  I presume you n t user a standard graphics driver that is included with Vista, but a graphics driver downloaded from the Toshiba page so maybe this message doesn't say the pilot graphic that you use now

  Welcome them

• Automator action "CVS Update" could not be loaded because the file ' / usr/bin/cvs "is not found.

  Hello

  I just receive my MBA a few weeks ago to Apple and noticed my Razor mouse worked only with BluTooth but not when it is plugged into a usb port.  Other mouse usb and external drives readers work well.  Razor support told me the plug-and-play subsystem has screwed up, and errors have been associated with Automator.

  I have only a local account and I have not linked to the iCloud account.

  I don't want to reinstall my laptop because I have 300 GB of data on it, as well as some programs that I installed.

  I think that a package is not properly installed or missing, but my OSX knowledge is poor, because I have just started using a Mac!

  Sophies-MacBook Darwin kernel version - Air.local 15.2.0 Darwin 15.2.0: Fri Nov 13 19:56:56 PST 2015; root:XNU-3248.20.55~2/RELEASE_X86_64 x86_64

  Error are usually refers to a/usr/bin/cvs binary missing, and he's not here.

  # ls-l/usr/bin/cvs

  LS: / usr/bin/cvs: no such file or directory

  Some key messages,

  The "CVS Update" action could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "Filter iPhoto items" cannot be loaded because the "iPhoto" application not found.

  Someone would let me know how I could diagnose it and perhaps repair?

  Best regards, Sophie.

  System.log reported,

  [dec 19 10:33:59 - Sophies - MacBookAir loginwindow [99]:-[SFLListManager(ServiceReplyProtocol) notifyChanges:toListWithIdentifier:] notified of changes of the list element with the identifier com.apple.LSSharedFileList.RecentApplications

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: the "Add movie to iDVD Menu" action could not be loaded because the application 'iDVD' not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Add Photos to the Album' could not be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'CVS Add' could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: "CVS Checkout" action could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'CVS Commit' could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: "CVS Update" action could not be loaded because the file ' / usr/bin/cvs "is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "Filter iPhoto items" cannot be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: the "Find items from iPhoto" action cannot be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Get iDVD slideshow Images' could not be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: the "Get Selected iPhoto Items" action cannot be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: 'Get iPhoto features' action cannot be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Import files in iPhoto' could not be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Launch of remote broadcasting' cannot be loaded because the application "QuickTime Broadcaster" was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "IDVD New Menu ' could not be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "IDVD new sequence in the film ' could not be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "IDVD new slideshow ' could not be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "IPhoto New Album ' could not be loaded because the"iPhoto"application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: "New QuickTime slideshow" action could not be loaded because the application "QuickTime Player" is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Play Slideshow iPhoto' could not be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Photos of the magazine' could not be loaded because the "iPhoto" application not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: 'Set Background Image iDVD' action cannot be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Set iDVD button face' cannot be loaded because the application 'iDVD' was not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Set Annotations of film' couldn't be loaded because the application "QuickTime Player" is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Set the properties to read film' couldn't be loaded because the application "QuickTime Player" is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action 'Set the movie URL' could not be loaded because the application "QuickTime Player" is not found.

  19 Dec 10:34 - Sophies - MacBookAir Automator [729]: action "See the iDVD Menu hand" could not be loaded because the application 'iDVD' was not found.

  dec 19 10:34:13 Sophies - MacBook - Air SpotlightNetHelper [301]: tcp_connection_tls_session_error_callback 9 __tcp_connection_tls_session_callback_write_block_invoke.434 error 22

  dec 19 10:34:13 Sophies - MacBook - Air SpotlightNetHelper [301]: 8 22 tcp_connection_tls_session_error_callback __tcp_connection_tls_session_callback_write_block_invoke.434 error

  dec 19 10:34:44 - Sophies - MacBookAir syslogd [48]: sender ASL statistics

  P.S Xcode is installed from the app store.

  and MacPorts is installed.

• Problem with control could not be loaded

  When I try to run this program, this figure shows the control could not be loaded. After the installation of NI LabVIEW Run-Time Engine, the problem is still there.

  I'm trying to find a solution.  Any help would be greatly appreciated.

  

  The LabVIEW runtime engine is not for that. Looks like you're missing the OL - 770 activeX controls.

• Error opening a VI (LabVIEW: unable to load dynamic library due to lack of external symbols or dependencies, or a format file not valid.) The file could not be loaded)

  Hi all!

  Yesterday, I worked all day in a VI and today, unfortunately, I'm frustrated when I tried to open it. Received the following error message:

  LABVIEW: Unable to load dynamic library due to lack of external symbols or dependencies, or a format file not valid. The "ENG633 v1.vi" file could not be loaded.

  This message repeats when I try else open a Subvi.

  Step by step:

  1. I created a copy of the LabVIEW VI example: "FuzzyEx Tanks with control of PI." I kept the copy in the same original directory.

  2 - I have edited the copy, created Subvi etc.

  3 - once I finished my course of programming I closed all the cut (ctrl-x) files and copied (ctrl v) into the other folder.

  4. then I tried to open the next day and... bug! I just couldn't do

  What can I do to open/recover the VI?

  I am using 32-bit LabVIEW 2016 in a Windows 10

  I tried opening them and got the same error you did, so I them opened with a hex editor to see if there was something in the file, and there is literally nothing other than the value of 0x00 for the entire file.

• Site navigation control Web could not be loaded in LabVIEW 8.5.1

  Hello world

  I'm using 8.5.1... Recently facing problem with controls ActivX LabVIEW, I started... When I place a calendar month or web browser on the front panel... There is a message that is displayed in the middle of th the command by saying that 'control could not be loaded... " Do it even affecting builds on this PC...

  What could go wrong! Please help me...

  Concerning

  Anil

  Hi Anil,

  This problem has to with the ActiveX control does not correctly bound to the palette. Please refer to this knowledge base for an explanation of how to solve this problem. Please post again if this does not solve the problem.

• During the installation of Windows, shows that an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  An error internal occureed in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  original title: an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  Hello Stephen,
  try to run the "Startup Repair" utility located on your installation DVD.
  hope this helps
  Eddie B.

• Windows Live Mail could not be started because msmail.dll could not be loaded. What should I do?

  Start Windows Live Mail

  Windows Live Mail could not be started because msmail.dll could not be loaded.  What should I do?

  Post Windows Live questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Win 2003 error - try to add and remove windows components I get this error. IIS.dll Setup library could not be loaded

  When you try to add and remove windows components I get this error. IIS.dll Setup library could not be loaded, or function OcEntry could not be found. code error 0x7e is on a system win 2003

  Hi MickRl,

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• When I insert a compatible game must be installed and the alert arrives to allow another comes in and says "the file 'Localization.xml' could not be loaded."

  When I insert a compatible game must be installed and the alert arrives to allow another comes in and says "the file 'Localization.xml' could not be loaded."

  Hi Scarface0721,

  Welcome to Microsoft Answers Forums.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) game in which you try to read?

  (b) have you been able to install and play the game before?

  (c) you are trying to install the game to your computer from the disk or directly trying to play from the disc?

  Method 1:
  Try to install and play the game in a different computer.

  Method 2:
  Try another disc and verify if you are able to install the game.

  Method 3:
  You can also post your request in the following forums site.

  http://forums.gamesforwindows.com/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP install error "File\i386\C_437.nls could not be loaded. The error code is 7. Setup cannot continue. Press a key to exit. "

  I've been setting up a windows xp professional operating system, I saw an error message "File\i386\C_437.nls could not be loaded. The error code is 7. Setup cannot continue. Press any key to exit", can anyone help me how can I solve this problem? Thank you.

  Hi HannaAntoun,

  See the article after some troubleshooting for your question:

  http://support.Microsoft.com/kb/330181

  I hope this helps!

• OCMSN.dll could not be loaded

  I use windows XP.  After installing Firefox browser IE stopped working. Uninstalled IE such as advised by ISP Tech I tried to download and install IE several times again with no luck.  Another tech said to go to the control panel and Windows components and check Add IE.  Components Windows gives me the message-Setup library OSMSN.dll could not be loaded, or function entry Oc is not found. Contact your system administrator.  The specific error code is Ox7e.  Also anything to be opened in a Micro Word and Power Point reader does not open, told to go to the control panel and select where to open.

  Is there a fix for this if I can use new IE?

  Thank you

  Thelma Hawk

  I don't know what are all your other computer problems, but if you mean that you see a message like this:

  The Windows XP Setup program
  Setup library Ocmsn.dll could not be loaded, or function OcEntry could not be found.
  Contact your system administrator.  The specific error code is 0x7e.

  Clicking OK gets:

  The Windows XP Setup program
  The application could not be initialized.

  I would say that Microsoft committed Support Engineer 'expert' is just send you in addition to their hunting wild goose.

  First of all, the file is not in the c:\windows\system32 folder.
  Second of all, the file is not a registrable DLL.
  I'm shocked that they indicated no sfc/scannow, but who will either replace the missing file.

  I would just replace the file (that's why I know what looks like the error message), but maybe we'll learn something from these 'experts' then maybe you'll have some better luck with those of other ideas.

  Remember what they say:
  
  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

• File setupdd.sys could not be loaded

  My installation of Windows XP Edition family became damaged and would not start.  I inserted the CD original and rebooted.  The PC has started from the CD.  It was not long before I got this error message:

  File setupdd.sys could not be loaded.  The error code is 32 768.

  Is there something I can do?

  You need a Windows XP replacement CD-ROM, looks like your current drive is corrupt.

  How to replace Microsoft software

  http://support.Microsoft.com/kb/326246