Split Tunneling does not
I'm working on an installation of the laboratory program at home with my X-5506, and I got a split tunneling configuration problem. Every change I seem to give me internet access, gives me access to the local network or remove both. The current configuration, I took them both and I am a little puzzled. I have attached the configuration. Any guidance would be greatly appreciated!
Change:
split-tunnel-policy excludespecifiedTO:
split-tunnel-policy tunnelspecifiedI notice you are using 192.168.0.0/24. Make sure that you do not work VPN'ing an address 192.168.0.0/24 as well (or a subnet that is also identical to your subnet that you are trying to access remotely) or it won't work. Overall, you should avoid using 10.0.0.0/24 and 192.168.0.0/24 in production networks because they are so frequently used in home networks. I also note that you have configured IKEv2. IKEv2 does not support split tunneling. SO be sure you use only the AnyConnect client in SSL mode.
Tags: Cisco Security
Similar Questions
-
Hello
First of all - thanks to all who post here. I often browse the forums and search for help here and its very useful, so a big pat on the back for all who contribute. My first post, so here goes...
I've got my ASA 5505 v8.2 configured to allow the AnyConnect. This works. Client can connect and access remote systems via VPN. What causes me a massive headache, is the customer loses internet connectivity. I played a bit with my config a bit so what I am about to post that I know for sure is incorrect, but any help is greatly appreciated.
Notes
1. the router was set up for a VPN site to site standard that is no longer functional, but as you can see all the settings are always in the router.
2. the router also a DMZ configuration has to allow access to the internet with the help of the DMZ to some customers
CONFIGURATION:
ASA Version 8.2 (5)
!
hostname MYHOST
activate mUUvr2NINofYuSh2 encrypted password
UNDrnIuGV0tAPtz2 encrypted passwd
names of
name x.x.x.x LIKES-SD
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
switchport access vlan 7
!
interface Vlan1
nameif inside
security-level 100
192.168.101.1 IP address 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP x.x.x.x 255.255.0.0
!
interface Vlan7
prior to interface Vlan1
nameif DMZ
security-level 20
IP 137.57.183.1 255.255.255.0
!
passive FTP mode
clock timezone STD - 7
the obj_any_dmz object-group network
10 extended access-list allow ip 192.168.25.0 255.255.255.0 192.168.6.0 255.255.255.0
permit access ip host x.x.x.x 192.168.25.0 extended list no_nat 255.255.25 5.0
tunneling split list of permitted access standard 192.168.101.0 255.255.255.0
192.168.101.0 IP Access-list extended sheep 255.255.255.0 allow all
pager lines 24
Enable logging
debug logging in buffered memory
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 DMZ
mask 192.168.101.125 - 192.168.101.130 255.255.255.0 IP local pool Internal_Range
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global interface 10 (external)
NAT (inside) 0-list of access no_nat
NAT (inside) 1 access-list sheep
NAT (DMZ) 10 137.57.183.0 255.255.255.0
Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
Route inside 192.168.8.0 255.255.255.0 192.168.101.2 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
http server enable 64000
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-aes-256 batus, esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
correspondence address card crypto 100 10 batus
crypto batus 100 peer LIKES-SD card game
batus batus 100 transform-set card crypto
batus outside crypto map interface
Crypto ca trustpoint ASDM_TrustPoint1
registration auto
name of the object CN = MYHOST
ClientX_cert key pair
Configure CRL
string encryption ca ASDM_TrustPoint1 certificates
certificate 0f817951
308201e7 a0030201 30820150 0202040f 0d06092a 81795130 864886f7 0d 010105
05003038 31173015 06035504 03130e41 494d452d 56504e2d 42415455 53311d 30
1b06092a 864886f7 0d 010902 160e4149 4d452d56 504e2d42 41545553 301e170d
31333036 32373137 32393335 5a170d32 33303632 35313732 3933355a 30383117
30150603 55040313 0e41494d 452-5650 4e2d4241 54555331 1d301b06 092 d has 8648
86f70d01 0902160e 41494d 45 2d56504e 424154 55533081 9f300d06 092 2d has 8648
86f70d01 01010500 03818d 30818902 00 818100c 9 ff840bf4 cfb8d394 2 c 940430
1887f25a 49038aa0 1299cf10 bda2a436 227dcdbf f1c5566b c35c2f19 8b3514d3
4e24f5b1 c8840e8c 60e2b39d bdc0082f 08cce525 97ffefba d42bb087 81b9adb9
db0a8b2f b643e651 d17cd6f8 f67297f2 d785ef46 c3acbb39 615e1ef1 23db072c
783fe112 acd6dc80 dc38e94b 6e56fe94 d59d5d02 03010001 300 d 0609 2a 864886
8181007e f70d0101 05050003 29e90ea0 e337976e 9006bc02 402fd58a a1d30fe8
b2c1ab49 a1828ee0 488d1d2f 1dc5d150 3ed85f09 54f099b2 064cd 622 dc3d3821
fca46c69 62231fd2 6e396cd1 7ef586f9 f41205af c2199174 3c5ee887 42b684c9
7f4d2045 4742adb5 d70c3805 4ad13191 8d802bbc b2bcd8c7 8eec111b 761d89f3
63ebd49d 30dd06f4 e0fa25
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP policy 40
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 DMZ
SSH timeout 10
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL encryption rc4 - md5, rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1
SSL-trust outside ASDM_TrustPoint1 point
WebVPN
allow outside
SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 1 image
enable SVC
internal ClientX_access group strategy
attributes of Group Policy ClientX_access
VPN-tunnel-Protocol svc
Split-tunnel-network-list value split tunneling
access.local value by default-field
the address value Internal_Range pools
IPv6 address pools no
WebVPN
SVC mtu 1406
generate a new key SVC time no
SVC generate a new method ssl key
username privilege 15 encrypted password ykAxQ227nzontdIh ClientX
ClientX username attributes
VPN-group-policy ClientX_access
type of service admin
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared key *.
tunnel-group ClientX type remote access
attributes global-tunnel-group ClientX
address pool Internal_Range
Group Policy - by default-ClientX_access
type tunnel-group SSLClientProfile remote access
attributes global-tunnel-group SSLClientProfile
Group Policy - by default-ClientX_access
type tunnel-group ClientX_access remote access
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:e7d92a387d1c5f07e14b3c894d159ec1
: end
-----------------------
Thanks for any help!
In your group strategy, you specified the ACLs that should be used for split Tunneling, but you forgot to change the policy, so the ASA always uses tunnel-all. Here's what you'll need:
attributes of Group Policy ClientX_access
Split-tunnel-network-list value split tunneling
Split-tunnel-policy tunnelspecified
--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni -
Easy VPN between two ASA 9.5 - Split tunnel does not
Hi guys,.
We have set up a site to site vpn using easy configuration vpn between ver 9.5 race (1) two ASA. The tunnels are up and ping is reached between sites. I also configured split tunnel for internet traffic under the overall strategy of the ASA easy vpn server. But for some unknown reason all the customer same internet traffic is sent to the primary site. I have configured NAT to relieve on the side of server and client-side. Please advise if no limitation so that the installation program.
Thank you and best regards,
Arjun T P
I have the same question and open a support case.
It's a bug in the software 9.5.1. See the bug: CSCuw22886
-
Router Cisco client VPN SPlit tunnel does not work
Hello!
I have configured the Cisco VPN CLient on a 2821 router, and it works fine.
I could access the inside resourses normally >
the problem is that when I connect with VPN I lost internet connectivity?What wrong with my setup?
Below the current configuration of the router.
Kind regards!CISCO2821 #sh run
Building configuration...
Current configuration: 5834 bytes
!
version 12.4
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
hostname CISCO2821
!
boot-start-marker
start the flash c2800nm-adventerprisek9 - mz.124 - 20.T.bin system
boot-end-marker
!
forest-meter operation of syslog messages
logging buffered 51200 warnings
!
AAA new-model
!
!
connection local VPN-LOCAL-AUTHENTIC AAA authentication
local AAA authorization network VPN-LOCAL-AUTHOR
!
!
AAA - the id of the joint session
!
dot11 syslog
IP source-route
!
!
IP cef
!
!
"yourdomain.com" of the IP domain name
8.8.8.8 IP name-server
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
voice-card 0
No dspfarm
!
!
username secret privilege 0 vpn 5 $1$ tCf1$ XAxQWtDRYdfy9g3JpVSvZ.
Archives
The config log
hidekeys
!
!
crypto ISAKMP policy 44
BA aes
preshared authentication
Group 2
life 44444
!
ISAKMP crypto group configuration of VPN client
key VPNVPNVPN
VPN-pool
ACL VPN-ACL-SPLIT
Max-users 5000
!
!
ISAKMP crypto ISAKMP-VPN-profile
identity VPN group match
list of authentication of client VPN-LOCAL-AUTHENTIC
VPN-LOCAL-AUTHOR of ISAKMP authorization list.
client configuration address respond
Configuration of VPN client group
virtual-model 44
!
!
Crypto ipsec transform-set VPN - SET esp - aes esp-sha-hmac
!
Crypto ipsec VPN-profile
transformation-VPN-SET game
Set isakmp VPN ISAKMP-PROFILE
!
!
interface GigabitEthernet0/0
IP 192.168.2.214 255.255.255.0
NAT outside IP
IP virtual-reassembly
IP tcp adjust-mss 1412
automatic duplex
automatic speed
!
interface GigabitEthernet0/1
IP 192.168.1.1 255.255.255.0
IP nat inside
IP virtual-reassembly
IP tcp adjust-mss 1412
automatic duplex
automatic speed
!
interface FastEthernet0/0/0
no ip address
Shutdown
automatic duplex
automatic speed
!
type of interface virtual-Template44 tunnel
IP unnumbered GigabitEthernet0/0
ipv4 ipsec tunnel mode
Tunnel ipsec VPN-PROFILE protection profile
!
interface Dialer0
no ip address
IP mtu 1452
IP virtual-reassembly
Shutdown
!
local pool IP VPN-POOL 192.168.1.150 192.168.1.250
IP forward-Protocol ND
IP http server
IP 8081 http port
23 class IP http access
local IP http authentication
no ip http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
!
IP nat inside source list ACL - NAT interface GigabitEthernet0/0 overload
!
IP access-list standard ACL-TELNET
allow a
!
extended ACL - NAT IP access list
ip permit 192.168.1.0 0.0.0.255 any
IP extended ACL-VPN-SPLIT access list
ip permit 192.168.1.0 0.0.0.255 192.168.1.0 0.0.0.255
scope of access to IP-VPN-ACL-SPLIT list
!
control plan
!
exec banner ^ C
% Warning of password expiration.
-----------------------------------------------------------------------
Professional configuration Cisco (Cisco CP) is installed on this device
and it provides the default username "cisco" single use. If you have
already used the username "cisco" to connect to the router and your IOS image
supports the option "unique" user, that user name is already expired.
You will not be able to connect to the router with the username when you leave
This session.
It is strongly recommended that you create a new user name with a privilege level
15 using the following command.
username
secret privilege 15 0 Replace
and with the username and password you want use.
-----------------------------------------------------------------------
Line con 0
exec-timeout 0 0
Synchronous recording
line to 0
line vty 0 4
ACL-TELNET access class in
exec-timeout 30 0
privilege level 15
Synchronous recording
transport input telnet ssh
line vty 5 15
ACL-TELNET access class in
exec-timeout 30 0
privilege level 15
Synchronous recording
transport input telnet ssh
line vty 16 988
ACL-TELNET access class in
exec-timeout 30 0
Synchronous recording
transport input telnet ssh
!
Scheduler allocate 20000 1000
end
CISCO2821 #.
I think that you made a mistake with your ACL name. the ACL applied is "VPN-ACL-SPLIT" which is an empty ACL. You must switch to that of "ACL-VPN-SPLIT" that has the entry "ip 192.168.1.0 allow 0.0.0.255 192.168.1.0 0.0.0.255" inside.
-
Help: Customer Cisco VPN & Split Tunnel but not Internet
Hi Forum.
We are faced with this problem: after having successfully open a VPN connection with the Cisco VPN Client to a router Cisco, the rest of the world are not properly available more.
This is what has been verified / so far attempted to identify the problem on a Windows Vista computer:
-Router: Split Tunneling is allowed according to sysop
-On the VPN-Client: "allow Local Lan access" is checked
-On the Client (statistics): only STI VPN-rout configured listed unter "guarantee routes." "Local Lan routes" is empty.
-Calling 'http://www.google.com' in IE fails
-Call ' 74.125.232.116' (IE IP) IE works / ping the IP works.
-nslookup properly lists the current DNS server
-nslookup www.google.com resolves correctly the name of intellectual property
It seems that it is not that the connection with the rest of the Internet is deleted, but DNS resolution fails somehow, even though all signs point to the appropriate DNS server is in force and although the command line can resolve the name.
does anyone have a tip how to debug this correctly?
No worries Pat...
Sent by Cisco Support technique iPhone App
-Please evaluate solutions
-
Satellite U840W - Toshiba Split Screen does not work
Hi all
My laptop is a Toshiba Satellite U840w. I reinstalled a new version of windows 8 pro but I lost all the software by default.
I decided to download Toshiba Split Screen to enjoy my 21:9 screen, but the problem is that it does not work!
When I run it, I can open his window to turn it but it does not appear in the notification area, and nothing happens.
I don't really know what to do, I hope someone has a solution. Thank you.
Kind regards.
Hello
I guess you have not installed all necessary drivers, tools and utilities that are available on the page of the Toshiba UE driver.
Make sure that you have installed the software suite next to the Split Toshiba screen utility
-Driver Toshiba system
-Toshiba system configuration utility
-Toshiba utility function of key
-Desktop Toshiba Assist -
In split view does not not on 15 "rMBP
Can someone give me some knowledge about why the Mode split has has stopped working? (It used to work before version 2.0.4 of El Capitan)
This is really useful and I really need it works again. I tried restarting, try with the mail; Chrome; Monitor activity & Notes. I don't know how to activate it, just hold the button in the upper left corner (if full screen). If you need the activity logs or anything made me know. Please help, Will be.
Details (no personnel is to say in detail. Serial number)MacBook Pro (retina, 15 inches, beginning 2013) 2.4 GHz Intel Core i7 8 GB 1600 MHz DDR3
Intel HD Graphics 4000 1536 MB
For general information about split view, see these articles to support:
Use both Mac applications side by side in split view
Focus on applications in full-screen or split mode
Please note the following points:
1. If certain applications to open in split mode and others are not, these need to be updated by their developers to support. If an application does not support full screen, it supports also not split.
2. If no apps open in split mode, follow the instructions in the support article first link above to activate "poster have separate areas."
-
Hi all
We have an IPSec tunnel that does not work. I think that Phase 2 is not established but I don't know why.
Add the output and the newspaper.
Thanks for your help
ASA-VPN-PRI/act/pri # sh crypto isakmp his
!
13 peer IKE: 91.209.243.5
Type: L2L role: answering machine
Generate a new key: no State: MM_ACTIVE!
ASA-VPN-PRI/act/pri # sh crypto isakmp his | include the 91.209.243.5
12 peer IKE: 91.209.243.5
ASA-VPN-PRI/act/pri #.ASA-VPN-PRI/act/pri # sh crypto ipsec his | include the 91.209.243.5
ASA-VPN-PRI/act/pri #.7. December 17, 2014 | 15: 40:48 | 713236 | IP = 91.209.243.5, IKE_DECODE SEND Message (msgid = c516994b) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84
7. December 17, 2014 | 15: 40:48 | 715046 | Group = 91.209.243.5, IP = 91.209.243.5, build payloads of hash qm
7. December 17, 2014 | 15: 40:48 | 715046 | Group = 91.209.243.5, IP = 91.209.243.5, payload of empty hash construction
7. December 17, 2014 | 15: 40:48 | 715036 | Group = 91.209.243.5, IP = 91.209.243.5, sending persistent type DPD R-U-HERE-ACK (seq number 0x7d6c)
7. December 17, 2014 | 15: 40:48 | 715075 | Group = 91.209.243.5, IP = 91.209.243.5, received persistent type DPD R-U-LÀ (seq number 0x7d6c)
7. December 17, 2014 | 15: 40:48 | 715047 | Group = 91.209.243.5, IP = 91.209.243.5, processing notify payload
7. December 17, 2014 | 15: 40:48 | 715047 | Group = 91.209.243.5, IP = 91.209.243.5, payload of hash of treatment
7. December 17, 2014 | 15: 40:48 | 713236 | IP = 91.209.243.5, IKE_DECODE RECEIPT Message (msgid = 29bf4142) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84
7. December 17, 2014 | 15: 40:43 | 713236 | IP = 91.209.243.5, IKE_DECODE SEND Message (msgid = b72ddf0a) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84
7. December 17, 2014 | 15: 40:43 | 715046 | Group = 91.209.243.5, IP = 91.209.243.5, build payloads of hash qm
7. December 17, 2014 | 15: 40:43 | 715046 | Group = 91.209.243.5, IP = 91.209.243.5, payload of empty hash construction
7. December 17, 2014 | 15: 40:43 | 715036 | Group = 91.209.243.5, IP = 91.209.243.5, sending persistent type DPD R-U-HERE-ACK (seq number 0x7d6b)
7. December 17, 2014 | 15: 40:43 | 715075 | Group = 91.209.243.5, IP = 91.209.243.5, received persistent type DPD R-U-LÀ (seq number 0x7d6b)
7. December 17, 2014 | 15: 40:43 | 715047 | Group = 91.209.243.5, IP = 91.209.243.5, processing notify payload
7. December 17, 2014 | 15: 40:43 | 715047 | Group = 91.209.243.5, IP = 91.209.243.5, payload of hash of treatment
7. December 17, 2014 | 15: 40:43 | 713236 | IP = 91.209.243.5, IKE_DECODE RECEIPT Message (msgid = ae5305df) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84
7. December 17, 2014 | 15: 40:38 | 713236 | IP = 91.209.243.5, IKE_DECODE SEND Message (msgid = b796798d) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84
7. December 17, 2014 | 15: 40:38 | 715046 | Group = 91.209.243.5, IP = 91.209.243.5, build payloads of hash qm
7. December 17, 2014 | 15: 40:38 | 715046 | Group = 91.209.243.5, IP = 91.209.243.5, payload of empty hash construction
7. December 17, 2014 | 15: 40:38 | 715036 | Group = 91.209.243.5, IP = 91.209.243.5, sending persistent type DPD R-U-HERE-ACK (seq number 0x7d6a)
7. December 17, 2014 | 15: 40:38 | 715075 | Group = 91.209.243.5, IP = 91.209.243.5, received persistent type DPD R-U-LÀ (seq number 0x7d6a)
7. December 17, 2014 | 15: 40:38 | 715047 | Group = 91.209.243.5, IP = 91.209.243.5, processing notify payload
7. December 17, 2014 | 15: 40:38 | 715047 | Group = 91.209.243.5, IP = 91.209.243.5, payload of hash of treatment
7. December 17, 2014 | 15: 40:38 | 713236 | IP = 91.209.243.5, IKE_DECODE RECEIPT Message (msgid = 98241c 63) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84
7. December 17, 2014 | 15: 40:33 | 713236 | IP = 91.209.243.5, IKE_DECODE SEND Message (msgid = e233621d) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84
7. December 17, 2014 | 15: 40:33 | 715046 | Group = 91.209.243.5, IP = 91.209.243.5, build payloads of hash qm
7. December 17, 2014 | 15: 40:33 | 715046 | Group = 91.209.243.5, IP = 91.209.243.5, payload of empty hash construction
7. December 17, 2014 | 15: 40:33 | 715036 | Group = 91.209.243.5, IP = 91.209.243.5, sending persistent type DPD R-U-HERE-ACK (seq number 0x7d69)
7. December 17, 2014 | 15: 40:33 | 715075 | Group = 91.209.243.5, IP = 91.209.243.5, received persistent type DPD R-U-LÀ (seq number 0x7d69)
7. December 17, 2014 | 15: 40:33 | 715047 | Group = 91.209.243.5, IP = 91.209.243.5, processing notify payload
7. December 17, 2014 | 15: 40:33 | 715047 | Group = 91.209.243.5, IP = 91.209.243.5, payload of hash of treatment
7. December 17, 2014 | 15: 40:33 | 713236 | IP = 91.209.243.5, IKE_DECODE RECEIPT Message (msgid = 36ecdf6a) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84
7. December 17, 2014 | 15: is.40:28 | 713236 | IP = 91.209.243.5, IKE_DECODE SEND Message (msgid = cb1b978d) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84
7. December 17, 2014 | 15: is.40:28 | 715046 | Group = 91.209.243.5, IP = 91.209.243.5, build payloads of hash qm
7. December 17, 2014 | 15: is.40:28 | 715046 | Group = 91.209.243.5, IP = 91.209.243.5, payload of empty hash construction
7. December 17, 2014 | 15: is.40:28 | 715036 | Group = 91.209.243.5, IP = 91.209.243.5, sending persistent type DPD R-U-HERE-ACK (seq number 0x7d68)
7. December 17, 2014 | 15: is.40:28 | 715075 | Group = 91.209.243.5, IP = 91.209.243.5, received persistent type DPD R-U-LÀ (seq number 0x7d68)
7. December 17, 2014 | 15: is.40:28 | 715047 | Group = 91.209.243.5, IP = 91.209.243.5, processing notify payload
7. December 17, 2014 | 15: is.40:28 | 715047 | Group = 91.209.243.5, IP = 91.209.243.5, payload of hash of treatment
7. December 17, 2014 | 15: is.40:28 | 713236 | IP = 91.209.243.5, IKE_DECODE RECEIPT Message (msgid = f25bcdb5) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84
7. December 17, 2014 | 15: 40:23 | 713236 | IP = 91.209.243.5, IKE_DECODE SEND Message (msgid = 32bca075) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84
7. December 17, 2014 | 15: 40:23 | 715046 | Group = 91.209.243.5, IP = 91.209.243.5, build payloads of hash qm
7. December 17, 2014 | 15: 40:23 | 715046 | Group = 91.209.243.5, IP = 91.209.243.5, payload of empty hash construction
7. December 17, 2014 | 15: 40:23 | 715036 | Group = 91.209.243.5, IP = 91.209.243.5, sending persistent type DPD R-U-HERE-ACK (seq number 0x7d67)
7. December 17, 2014 | 15: 40:23 | 715075 | Group = 91.209.243.5, IP = 91.209.243.5, received persistent type DPD R-U-LÀ (seq number 0x7d67)
7. December 17, 2014 | 15: 40:23 | 715047 | Group = 91.209.243.5, IP = 91.209.243.5, processing notify payload
7. December 17, 2014 | 15: 40:23 | 715047 | Group = 91.209.243.5, IP = 91.209.243.5, payload of hash of treatment
7. December 17, 2014 | 15: 40:23 | 713236 | IP = 91.209.243.5, IKE_DECODE RECEIPT Message (msgid = a3f0e3f9) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84Please repeat the debug with "debug crypto isakmp 100". And compare the config of the Phase 2 on both sides:
- Is what ACL crypto exactly in the opposite direction on both sides?
- Your transformation sets include exactly the same algorithms?
-
Audition Audio 'Split function' does not?
Have no idea why, but on my old Adobe audition 3.0 version (which works perfectly), when I go to multitrack view and want to change a track - requiring the split function - it does not work. I pull up the menu and 'split' is one of the options (normal) - then I left click on the position where I want to change the audio track. (normal) THEN, when I use the right click and HOLD function on the mouse to "drag" the piece of splitting the audio down in another (normal) track, now it does not work - nothing happens. Our here does he know why it can happen? Very frustrated. Is there a secondary way, I can try to 'split' or separate and 'move' the play published audio... when done, I then MIX again...
For the record - I CAN cut section and paste it into another track, but I can't MOVE the tracj with my my right click on the mouse.
make people of sense? pls advise - Johnny W
You have the right hybrid tool, selected from among the four tool icons in the menu bar? You don't do a right-click and drag if you have the choice of time or scrub tool selected.
-
RTMPT / Tunneling does not work
I have Flash Media Streaming Server 3 running on a Windows 2003 with IIS 6 computer. I can see the samples of video on demand, locally and remotely very well using rtmp, but not rtmpt. I have disabled the socket pooling using httpcfg, but FMS 3 does not seem to be binding for all IP addresses on port 80. Next steps?
HBZYou can add ports in a comma-delimited list:
ADAPTER. HOSTPORT = xxx.xxx.xxx.12:1935, 80
Then restart the service of the FMS, and you should be all set. You can run netstat-nab from the command prompt to ensure that the FMS is bound to port 80
-
Hi all
I found this in this forum to split a string into a pl/sql table
(I need to be a pl/sql table)
has tried this:CREATE OR REPLACE PACKAGE pack_test IS TYPE T_ARRAY IS TABLE OF VARCHAR2(255) index by binary_integer; FUNCTION get_array_from_string(p_string IN VARCHAR2, p_separator IN VARCHAR2) RETURN T_ARRAY; END pack_test; / CREATE OR REPLACE PACKAGE BODY pack_test IS FUNCTION get_array_from_string(p_string IN VARCHAR2, p_separator IN VARCHAR2) RETURN T_ARRAY IS v_string VARCHAR2(4000); v_initial_pos NUMBER(9) := 1; v_position NUMBER(9) := 1; v_arr_string T_ARRAY := T_ARRAY(); BEGIN v_string := p_string || p_separator; LOOP v_position := INSTR(v_string, p_separator, v_initial_pos, 1); EXIT WHEN(NVL(v_position, 0) = 0); v_arr_string.EXTEND; v_arr_string(v_arr_string.COUNT) := SUBSTR(v_string, v_initial_pos, v_position - v_initial_pos); v_initial_pos := v_position + 1; END LOOP; RETURN v_arr_string; END get_array_from_string; END pack_test; /
and it gives me:declare TYPE T_ARRAY IS TABLE OF VARCHAR2(255) index by binary_integer; lv_elements t_array; begin lv_elements := pack_test.get_array_from_string('1,2,3,4', ','); end;
expression is of the wrong typeORA-06550: Regel 5, kolom 18: PLS-00382: Uitdrukking heeft onjuist type.. ORA-06550: Regel 5, kolom 3: PL/SQL: Statement ignored.
what I am doing wrong
KR
MartinHello
The t_array type defined in the package is not the same as the t_array type defined in your anonymous block. They may have the same name and the same characteristics, but they are both distinct and non-interchangeable.
Change the call block so that it uses the type declared in the package:
declare TYPE T_ARRAY IS TABLE OF VARCHAR2(255); -- Not needed, you can delete this line lv_elements pack_test.t_array; -- This line has been changed begin lv_elements := pack_test.get_array_from_string('1,2,3,4', ','); end; -
In split view does not work in safari 2 Air iPad
I just got a new iPad 2 Air, drag and split screen works well, but I can't get Safari to work in split view and have two windows safari side by side. I should be able to hold on a link and get the "open in split view" option, but this option is not there. Also, I cannot move the page sideways tabs under the address bar and is unable to pull on the side of the screen to initiate the split view.
I hope its something simple!
any help would be great.
Thank you.
You cannot have two windows side by side in iOS Safari 9. This may change in the iOS 10. Until then, there is this work around: https://itunes.apple.com/us/app/sidefari-web-browsing-companion/id1046968235?mt= 8
-
iPad iOS9 Air split screen does not work
I have an iPad Air (model A1474) & I can't get the split screen function to work in iOS9.3.1. I turned off the iPad, reset all settings, update all applications and I don't always get the bar of the double line to split the screen. Tried with mail & message/safari.
It is not available on the Air iPad. From there.
http://www.Apple.com/iOS/whats-new/
- Picture in picture and drag more are available on iPad Pro, iPad Air or later and mini iPad 2 or a later version. Split view is available on iPad Pro, mini iPad iPad 2 Air and 4.
-
I can't use the screen function split on my MacBook Pro with the Retina display, 2015.
I went into System-> Mission Control-> Display Preferences have separate spaces
Clicking and in now on the green button (with the two triangles outfacing) do not allow me to drag, regardless of the direction in which I chose
Split mode only works with apps that are split enabled.
-
Currently, I conducted a simple BB app that works like deisgned to my handheld via T-Mobile. I am facing the problem where this application is tested in another country and receiveing an IOException Tunnel failed error message.
I just realized that the APN settings are OK! for TMobile. However out of the USA, the APN info are not defined or do not work for the carrier.
Y at - it everywhere where I could get my code filled or my .cod signed that would allow me to use the Blackberry Internet Service to establish the connection. I am a new developer and will not be able to participate in the program of the alliance.
Is it more to do this?
Best regards
Matthew gerardPlease read Peter «Networking in Blackberry» guide
Its the best wire/document on these issues. It has links to all the relevant articles KB etc.
-MO.
Maybe you are looking for
-
Satellite U205-s5002 request BIOS password which I do not know
All Halo. I can't get into windows, because the system asks me to enter the Bios password.But I don't know what is the password. Can someone help me backdoor password?My laptop is Satellite U205 - s5002.if someone has same laptop with me. Please, hel
-
Keep the adapter 6 t. 04 you connect to internet via wifi when it is working properly?
I amhaving the same question a lot of people are seen and think that this is the reason why I can't connect to the internet. I have wifi at my house
-
HP Total Care Advisor PC begins with start up. Recently, windows close program. I thought I found a solution that was told to copy the HP Totalcare Lbrary of c:\swsetup in c:\windows\installer The people who did this were delighted. He has not work
-
Seagate drive in the BIOS but can't see it in the file manager
Earlier this week, I installed a Solid State Drive as my boot drive. It works very well. I want to use 2 TB Seagate that came with my Inspiron 3847 as backup devices (slave) and I also want to take 10 Windows out of it. I can see the drive in device
-
Hello! I recently bought the new elitebook 2760p and that's great, except this problem I encounter. The problem is that every once in a while when I'm listening to music or watching a movie, get it all scratchy sound for one second and that is ok. as