its EliteBook 2760p problem '

Similar Questions

• My EliteBook 2760p had a hard drive failure and now, after replacing, it works a lot slower

  Good afternoon!

  I have a serious problem with my EliteBook 2760p!
  About two months ago, my EliteBook had a disk failure hard and after more than two weeks of control and test.
  the hard drive has been replaced, and I received my EliteBook return.
  I immediately saw that the previously installed Windows 7 with Croatian language pack and MS Office starter edition
  has been replaced with an English version of Windows 7 without the starter edition of MS Office.
  I also noticed that my EliteBook was significantly slower than it was before the change of hard disk!
  This situation was unacceptable, and I took my EliteBook serving for additional repairs.
  The gentleman of the function COS ZEL in Zagreb took a week or so more to test and verify everything
  out and then he said that "they are not the error I described, and I can now pick up my EliteBook.

  My EliteBook is always in this State and is considerably slower than it used to be!
  Even more, the screen does not "flip" when I turn. In addition, the buttons at the bottom of the screen,
  do not work.

  I would like to know where I can go do my EliteBook restored to the exact state as I initially have bougth inside
  or be replaced by the new EliteBook under warranty because this state my EliteBook is online is not
  acceptable or feasible.

  Kind regards

  Marko Sinković

  SINke, I saw your post and has forwarded to the right people for their review. You should hear from someone bit via private message on this Forum.

• Restore for HP Elitebook 2760p DVD / Win 7 pro / 64

  Hello

  I was wondering where I can download DVD Restore for HP Elitebook 2760p / Win 7 pro / 64

  Is it possible to download them via HPSC?

  P/n: LG681EA #ABN

  Thank you in advance.

  Concerning

  Hello

  Unfortunately there is no option to download available, but you can order a set of replacement recovery disks using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• After execution of the new updated Adobe, HP Elitebook 2760p left click on the touchpad button has stopped working.

  Original title: left click not working not not on HP laptop

  On my HP Elitebook 2760p running Windows 7 Pro 64 bit, left click on the touchpad button has stopped working.  The right click works, the works of pad, (scrolling and click on) it's just the left click.  It started after the execution of the new update of adobe. I tried to uninstall and reinstall the driver synaptec. I tried the mouse fast and slow speed. I tried pressing rigid, flexible, in different places. I would try to uninstall the update from Adobe, but it won't allow me.  So I uninstalled Adobe Reader and re-installed. Still nothing. Any suggestions?

  Hi cyrilmillot,

  You try to run the Adobe Reader removal tool to remove the Adobe reader completely the system software.

  See the link to Adobe to download the removal tool:

  Adobe Reader/Acrobat removal tool

  After retiring, you can check whether the left click works. If it does not, you could get in touch with Adobe support for further assistance on this topic:

  Adobe forums

  http://helpx.Adobe.com/support/

  If the problem persists, then it may be a hardware problem and you may have to contact HP support for further assistance:

  HP support

  HP laptops - use and configure the TouchPad (Windows 7 and Vista)

• Touchscreen stop EliteBook 2760p work after windows

  EliteBook 2760p

  'Pen' and 'Finger touch' stop working

  Product name: HP EliteBook 2760p

  Operating system: Windows 7 Professional 32-bit (service pack 1)

  Error: cannot anywhere find any error message

  Changes made to the system hardware or recent software: no

  Description of the problem:

  I didn't go to the customer service again I have not go I post just this forum who know someone who can help.

  'Pen' and 'Finger touch' stop working if I do this:

  STEP A

  Spoiler (Highlight to read)

  1. stop windows / power off

  2. remove the batery (while the touchscreen still works)

  3. plug the power cord

  4. start windows / power

  5. stop windows / power off

  6. unplug power cord

  7. Insert batery

  8. start windows / power (no batery power to just cord)

  9. press on the screen work stoppage

  1. stop windows / power off2. remove the batery (while the touchscreen still works) 3. Connect power cord4. Start windows / power on5. Windows Shutdown / power off6. Unplug power cord7. Insert batery8. Start windows / power (no batery power cord just) 9. Touch screen stop working

  Connection method: wifi

  Issue of duplication: Happens all the time when I do above, even if I only do step r.5 to 8

  Performed troubleshooting:

  STEP B

  Spoiler (Highlight to read)

  1. when the screen does not touch and batery is inserted and plugged power cord.

  2. shut down windows

  3. start windows

  4 touch screen works again (until I do the steps A.1 - 8 or 8 - A.5, it occurs once again)

  1. when the touchscreen does not and batery is inserted and no plugged.2 power cord. Stop windows3. Start windows4. touch screen works again (until I do the steps A.1 - 8 or 8 - A.5, it occurs once again)

  Technical expertise: I can install windows, drivers and software, but I don't like not change registery, install crapware or not normal tweaks.

  SLIPPED

  Finally I have my laptop is back to the customer service. and he replaced my screen. now, it works fine.

• Unknown device for HP elitebook 2760p driver

  I think I need to give more info to my question on the pilot "unknown device". My laptop is the HP Elitebook 2760p with windows 7 Home premium and I need a driver more called "unknown device". I found these numbers to the pilot: Port_ #0001.Hub_ #0004

  Hi again,

  The driver you need is: validity fingerprint sensor driver

  I connected the driver under xp-> 8.0 and 8.1

  Windows xp-> 8.0

  Windows 8.1

  Please let me know the result.

• Can not see module 3 G/WWAN of HP Elitebook 2760p

  Hello

  One of our clients has recently purchased a new HP Elitebook 2760p Tablet PC and also bought a SIM card for it as well to use the WWAN module when you travel. The computer is running Windows 7 Pro.

  I put the notebook myself at first and installed hardware drivers for the supplied driver support DVD. Unfortunately, however, HP connection manager cannot see the 3 G/WWAN module to make use of the SIM card. The module does not appear in the Device Manager but is permanently enabled in the BIOS.

  Can someone please give me a hand with this? I would like to know if there are third-party drivers or some other piece of software that this machine needs to use this feature.

  Thanks for your help

  Brendon

  Hello

  Each line is an option, the machine can not have all.

  I hope this helps.

  Update: you can download the following manual, open up the back and consider such physical module indicated in the #53 page:

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c03567855/c03567855.PDF

  Note: This is an option, no fault. The antenna (2) may be there.

• How to cancel the (neroburnplugin.dll) its giving me problems with my Mediaplayer.

  Original title: vista

  Thank you, how to unsubscribe (neroburnplugin.dll) its me giving problems with my Mediaplayer.already a mr.fixit and he came to areport from you.

  Vista home Premium 64 Im sorry and not so bright more could you please help me!

  Hi Royce,

  1. What is the exact problem that you face with Nero burning plugin?

  2. you receive messages or error codes?

  3. what Fixit did you run to fix the problem?

  Method 1:

  You can download the hotfix in the following article and check if it helps.

  FIX: Windows Media Player stops responding when you use a Nero burning plug-in

  Method 2:

  If you still experience the problem, then try to uninstall the Nero burning plugin and check.

  You can read the following article to uninstall Nero.

  Uninstall a program

  Hope this information is useful.

• Upgrade memory EliteBook 2760p - removal of keyboard problems

  My 2760 p came with 4 GB, and I have now bought 2 x 8 GB to take up to 16 GB.

  The existing RAM is in the secondary area of RAM (under the keyboard) with another (primary) RAM location empty available under the basic sercie coverage.

  Use of the service manual (c03011611.pdf or part no.641800 - 002) I tried to follow the instructions, which are essentially:

  -remove the battery, service coverage

  -remove the 2 plugs screw (which do not actually appear to exist on the model recently bought) and unscrew the 5 captive screws

  At the above, no problem, but the questions come when you try to remove the keyboard. The instructions are:

  "

  Insert a flat tool under the edge rear (1) of the keyboard near the hinge of the screen. Carefully lift the rear edge of the keyboard (2) and disconnect the keyboard. »

  Questions are: has) unless I'm trying to plug in the wrong place (think so much - summer probe 20 minutes now) there is virtually no gap to insert any flat tool - I mean "virtually no space" I even tried under the knife of a surgeon...

  and (B) I thought that I would try to return the unit and shake gently to allow I hope the keyboard let go to drop a small amount - but the keyboard does not seem to move.

  Question - are those still running instructions and correct?  and if so, what exactly is the thing down the keyboard without destroying them?

  Thank you

  PS Guys HP - photos of some of your books are not great quality (too dark) and have also been downsampled so remove detail key. Really, I'm not afraid download a 20 MB PDF manual if it makes things clearer.

  Access your model as seen in the screenshot.

  http://h20574.www2.HP.com/default.htm?lang=en&cc=us&hpappid=psml

  Make sure that you are connected to the instance before you click on the media library.

  Give the time for the video to load and when there, click on "Keyboard" in the left column.

  

  Manuals can become obsolete as new models and features are introduced. HP is really bad for not their update, this applies to their drivers as well.

• EliteBook 8440p: problems of Expansion RAM HP 8440p

  I recently decided to upgrade the memory on my EliteBook 8440p. After reading the form of RAM required, I bought one of these: http://www.ebuyer.com/737970-kingston-4gb-1333mhz-204-pin-cl9-ddr3-sodimm-non-ecc-unbuffered-1-5v-me...

  Once the new RAM is installed in the expansion slot, Windows will not start and crashes just on screen "starting Windows." Then I tried a test of memory using the system BIOS diagnostic tool, but the laptop either hangs around 35% (I left it there for about two hours), restarts, or stops altogether. I thought that I would give to the system try, repair tool but which caused also just the laptop restart. Curiously, when I check the "System information" tab the system diagnostics, the two RAM sticks are detected with current and accurate information.

  I contacted eBuyer, they sent a replacement out there, but I'm having the same problem again. So, I thought I would try to install new RAM in the internal slot instead (under the keyboard), but now I have a BSOD during the 'Starting Windows' screen, give me code error, "IRQL_NOT_LESS_OR_EQUAL"

  I read on some forums tech upward. One of them suggested runs what is called 'Memtest' at startup via the CD, I tried, but the laptop restarts only during the first passage of the test of memory (and of course some loops over and over again until I remove the CD).

  I'm starting to lose hope! Any help/advice/suggestions would be greatly appreciated.

  Hello:

  See this related post.  You must use a very specific memory in this model, or it won't work.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/RAM-memory-modules-that-actually-work-for-HP-EliteBook-8440p/m-p/5570634/highlight/true#M335108

• HP Elitebook 8460p: problem with drivers

  Hello again,

  Thank you for the quick support here

  Here, I have problems with the drivers on my HP Elitebook 8460p running Windows7 ultimate 64-bit, whenever I have dwonload drivers on hp support for 64-bit Windows business Web site and install them.

  they run but the desktop screen breaks down and brown colours cover... What can I do?

  Hello

  In fact, there is one specific to Windows 7 Enterprise, the same driver supports 7 Home Basic, Premium, Pro, etc.

  Is a specific device that gives the problem? for example a connection Wi - Fi, video, Audio...

• its Lenovo y500 problems

  Hello everyone I am new to this forum and new to a y500. So I recently had the y500 it has been refurbished, but it works great execpt for a problem. When I play a game for a little while the sound mess up. It's a static sounds like when your on a television channel, you're not became any signal. its strange because when I get off the game it stops so I have no idea how to fix it or if it is a hardware or software problem. Any help would be apprieciated thanks

  Hello
  Welcome to the forum!
  In my view, that noise may be due to loud noises of the game or the configs of the sound card. Could you first of all check the sound of the game settings and see if it helps and then check Manager (dolby, realtek etc.)
  You can also try reinstalling the audio drivers. Download from driver lenovo download page or the drive d of your laptop.
  Concerning

• Drivers on Elitebook 8560w problem

  Hi all

  I wonder if you might be able to shed some light on a problem I encounter.

  I'm building an Elitebook 8560w with Windows XP x 86. But I can't find the drivers for the following items:

  Base system device

  USB device

  This is how they appear in Device Manager. Strangely, I have installed the USB driver from the HP site, and they work very well. But I still have the yellow exclamation next to the USB device in the DM window?  I don't know what is peripheral Base system!

  Any help would be appreciated!

  See you soon,.

  Andy

  You are the very welcome, Andy.

  It's your sensor of fingerprints that need the pilot.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5071171&prodNameId=5071173&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ob-99717-1

  Best regards

  Paul

• Its Vostro 5470 problem

  Hello, a few days ago my laptop has this problem, whenever I use battery, im meaning not charging my laptop... the speaker gives crackling sound... and I have to change the format of its 192000Hz to 96000Hz... It's only works in mode balancing and high performance, but in the case of power gain... I need to change to 48000 Hz... It also happens when my laptop support... then what is the problem? I rarely use my portable speaker because I have external speakers... but this is the first time that this has happened.. .last week portable speaker works perfectly... Why now?

  zerogamerz

  When I use the battery, which means im not charge my laptop... .He also occur when my laptop support...

  Then, it happens all the time, both on battery and when it's plugged in?

  zerogamerz

  last week work perfectly portable speaker

  Try to use the system restore Windows (type in the search box system restore) to return to a date before the problem started.

  You can try other things are to download and install a new copy of the Vostro 5470 assistance pageRealtek audio driver, try an older version of the audio, a driver from Realtek website, switch to the native Windows audio driver or perform a System Recovery.

  Here are the instructions for switching to the native audio driver:

  1. open Device Manager (type devmgmt.msc in the start search box and press ENTER).
  2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio" the seller.
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.
  [To return to the Realtek driver, do it again but reverse the names in steps 1-6.]

  Here are the instructions to get a driver from Realtek:

  Go to the selection of downloads Realtek page. http://www.Realtek.com.tw/downloads/
  On the page, click on 'High Definition Audio Codecs.
  Check "I accept", and then click "next".
  In the column named "Description" you can find the file named README. Who has the instructions for the installation or update.
  In the column named "Download", click one of the server names to download the Readme.
  Return to the column named "Description" and select your operating system (and if it is 32 bit or 64 bit) at the top of page 2 choice in the list.
  In the column named "Download", click one of the server names to download the driver.

• "ITS creation failed" problem for IPSec VPN

  An ASA 5100 is used to provide VPN access for my business. The configuration was made by a permeable man who has been missing for some time, and the configuration used to be OK until this morning. This morning, some users reported that their VPN would have fallen once got connected. I checked the ASA and ASDM, I see every time when user deletes, it IPSec tunnel is always action. Furthermore, I faked the problem and got the newspaper of errors such as:

  1 11:14:45.898 12/06/07 Sev = WARNING/3 IKE/0xE3000065 could not find an IKE SA for 10.2.1.8. Abandoned KEY_REQ.

  2 11:14:45.898 12/06/07 Sev = WARNING/2 IKE/0xE3000099 could not open the P2 generate a new key: error detected(Initiate:176)

  3 11:14:45.898 12/06/07 Sev = WARNING/2 IKE/0xE3000099 cannot open the QM (IKE_MAIN:458)

  On the side of the AS I did "debug crypto isakmp" and 'debug crypto ipsec' and I got the following errors:

  iscoasa # ERROR IPSEC: expiration of the timer of the asynchronous operation, SPI: 0x114CA5B6, user: roeladmin, peer: 202.x.x.70, time: 2 seconds, ctm_ipsec_create_sa:856

  IPSEC ERROR: Material outside ITS create command failed, SPI: 0x114CA5B6, error code: 0 x 17

  IPSEC ERROR: Asynchronous Operation timeout expired, SPI: 0x61BE2022, user: roeladmin, peer: 202.x.x.70, time: 2 seconds, ctm_ipsec_create_sa:856

  IPSEC ERROR: Cannot add a user auth, SPI input: 0x61BE2022, user: roeladmin, peer: 202.172.62.70

  IPSEC ERROR: Cannot create an inbound SA SPI: 0x61BE2022 document

  IPSEC ERROR: Unable to complete the command of IKE UPDATE

  12 June at 14:25:13 [IKEv1]: Group = LANWORKS, Username = roeladmin, IP = 202.172.62.70, error QM WSF (P2 struct & 0 x 4699058, mess id 0xf37ec6f4).

  12 June at 14:25:13 [IKEv1]: Group = LANWORKS, Username = roeladmin, IP = 202.172.62.70, peer table correlator Removing failed, no match!

  IPSEC ERROR: Material Inbound ITS create command failed, SPI: 0x61BE2022, error code: 0 x 17

  It shows that ITS creation has failed. But I can't find the problem with the configuration. Can someone help me on this? Thank you

  Outgoing material ITS create command failed, SPI: 0x114CA5B6, error code: 0 x 17

  It is a hardware problem, reset the firewall and it will work, I saw 4 times in different ASAs

  Please hate the post if help.