spooler print does not preach

Similar Questions

• pilot of spool printing does not start

  I clicked on Start / Settings / Control Panel / Administrative Tools / Component Services

  Then I clicked on Standard down and scroll to the bottom of the print spooler services list and made sure it was automatic. Then I started the service, but when I went back to the printer folder in the Control Panel, to add a printer, the print spooler would stop.

  I clicked on Start / Settings / Control Panel / Administrative Tools / Component Services

  Then I clicked on Standard down and scroll to the bottom of the print spooler services list and made sure it was automatic. Then I started the service, but when I went back to the printer folder in the Control Panel, to add a printer, the print spooler would stop.

  There are generally 2 reasons that cause the print spooler to stop: a printer driver damaged or corrupted a print job.  It is also possible that the malware has caused this, so you'd be wise to scan your system with these two free scanners:

  MalwareBytes Anti-Malware
  SUPERAntiSpyware

  Download, install, update and run each.  Do not do both at the same time.  Each will take a while, depending on the size of your hard disk drive, so have a few tasks not computer lined up after the start of the analysis.

  Malware side, here are the steps to clean your printer drivers and the possible corruption of print jobs.

  First, stop the print spooler.  You can do it using the tool Services even you know.

  Scroll down to the print spooler, and then click Stop
  Open a Windows Explorer window and enter the following in the address box:
  C:\Windows\system32\spool\PRINTERS
  Delete all files in this folder, but do not delete the PRINTERS folder itself.

  Then, follow the instructions here to clean and reinstall your printer drivers: Article 1.  If you have a Lexmark printer, follow the instructions here instead (they are essentially the same, but includes a few additional steps for printers Lexmark).

• Equium M40X: Cannot print - not done. Print Spooler service does not

  My notebook Equium M40X has suddenly decided to stop from allowing me to print, gives me the message "operation was not completed. "print spooler service does not. I get this message even when you try to install the original installed printer drivers.

  To resolve this problem, I went to the services.msc to attempt to start the print spooler, but the command is not here present and seems to be missing. I also tried to launch it by clicking Start and then run and typing "net start spooler", but even once, it does not. Can anyone help with this?

  My laptop is an Equium M40X and the operating system is Windows XP Service Pack 2.

  Hello

  This error occurs because the spooler service has not been started or has stopped working.
  It seems that this error is known to Microsoft and they decided to public an article in the knowledge base that could help solve this problem.

  http://support.Microsoft.com/kb/314876

  As you say that the spooler service must be restarted.
  To start the spooler service, follow these steps:
  1. click on start and then click Control Panel.
  2. double-click Administrative Tools and then click Services.
  3. double-click on the Printer Spooler service and then change the startup type to automatic. This option sets the spooler service starts automatically when you restart the computer.
  4. If you want to start the spooler service immediately, click the Start button under the Service status field

  If you will not be able to restart the spooler service, you can try to restore the Windows operating system to the point initially by using the Windows System Restore tool.

• Print Spooler service does not

  All of a sudden my computer says print spooler service does not.  There are no printer.  What in the world happened and how to I fix that?

  Hi Mark,

  Try to reset the spooler Services service, click Start-> Run Type & -> services.msc-> ok.

  Locate the printer spooler on the right side-> right click and select Restart-> now Double click on Print spooler-> select automatic for startup type.

  If give you the error, try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.

  I hope this helps.

• Print Spool system does not

  Print Spool system does not

  BurrWalnut:

  Follow-up of your suggestion and files deleted.

  In a ditch last effort, I went back to Mr. Fixit and found a solution to not be able to load the printer.

  Mr. Fixit has helped do its thing.  Drivers charged for the HPLaserJet1020.  It's working now.

  Thanks for the lead that has cleared the decks, so reloading might work.

  Best regards

• on a printer shared and I get printer spooler properties does not

  When I try to print from my other pc it say memory and Printer Spooler context does not and when I go to control panal printer and try to right click on anything it says the spooler does not and not connected

  You can print from the computer to which the printer is physically connected (assuming that the printer is physically connected to one of your computers)?

  What version of Windows, including the service pack is on the computer to which the printer is physically connected? (Right click on desktop and select Properties, if you do not know).

  What version of Windows, including the service pack is on the computer that is giving you problems?

  How did the computer which gives you problems connected to your local network?

  Can you access any file on the right computer of the bad computer?

  What is the brand and model of the printer?

  The following applies to the computer that is giving you problems:

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  IMPORTANT: If either of the analysis above turns up malicious software (other than tracking cookies), both from the scans will work on all the other computers connected to your local network.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Printer error print spooler service does not? Why not

  I have a problem with my printer .  I went to use this boy was that cannot use a misstake... go Control Panel /printer .and see I have no printer and you can't print at all.  I tried to instwith a CDerror the Print Spooler service does not... I need help big time what should I do? 

  HELP Florida Irving

  Hello

  Try the steps below and check if they help to resolve the issue.

  Method 1:

  Check the link below and try the troubleshooting steps provided to solve the problems with the printer in Windows.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  If the steps in the link above do not help, try to manually restart the Printer Spooler service.

  You must be logged on as administrator to perform these steps.

  (a) open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  (b) double click Services.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) right click on the print spooler service, and then click Properties.

  (d) on the general tab, next to startup type, make sure that automatic is selected.

  (e) if the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation

• printing problem "the print spooler service does not work.

  Original title: printing problem

  I want to print, but a warning said "the print spooler service does not work.  What is c? or what can I do?

  Hello

  I suggest to follow each steps of troubleshooting provided in the link below and also suggest to run the Fixit tool in step 2 and verify if it helps solve the issue

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• After cleaning viruses with Norton software, I lost my Brother printer connection. Message: Printer Spooler Service does not. Can anyone help me to restore

  I lost the connection to the printer or I can add a printer because it - Printer Spooler service does not. Can you have a suggestion or an opinion. Thganks much. Michael

  Right click on 'My computer' / select 'manage '.

  Under "Services and Applications", select 'Services '.

  Check to see if the "Print spooler" service is "started" and "Startup Type" is set to "auto".

  Also check if the 'RPC Remote Procedure Call () service is also "started" and "Startup Type" is set' auto.

  J W Stuart: http://www.pagestart.com

• Failed to load printer - clicking Add indicates a Printer Spooler Service does not.

  Upgrade Windows XP to SP3 last night.  Now all in printers and faxes has disappeared.  Click on add a printer indicates the Spooler Service does not.   Went in and forced a start; Add the said printer still does not.

  Deleted old printer drivers (Lexmark).  Downloaded updated.  Execution of Lexmark is set up; said the spooler does not (yet), tries to start.  Then, the installation fails saying "No. valid Ports for the driver.

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  I think that your problem is related to the way that Lexmark install printers, as explained in this excerpt from the article linked in step B below (step numbers refer to article in full):

  If you have a Lexmark printer, these additional steps may be necessary (thanks to Robert Orleth [MSFT] to provide this information).  Sometimes, the Lexmark printer installation process installs a service that makes dependent Print Spooler service itself.  If there is a problem with service Lexmark or a Lexmark printer driver (or you have removed using the procedure above), Print Spooler service does not start (see also http://support.microsoft.com/default.aspx?scid=kb;en-us;324757).  The steps below make Print Spooler service only on service (RPCSS) remote procedure (RPC) call, which is normal.  Print Spooler service dependencies are stored in the registry at

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler\DependOnService

  The sc config step 16 command resets the value for this entry.

  1. Open a command prompt window

  2. the control key
            sc config spooler depend = RPCSS
        (Note the space after the = not before)

  3. Restart print spooler (see steps 8 and 9 above)

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• The Print Spool Service does not work

  I use Windows XP and have 2 printers installed.  I had no problems until recently, when I try to print I get an error message that I need to install a printer.  When I went to control panel to check the status of my printers don't have no installed printer.  When I clicked on the "Add a printer" icon, I received a message that the "Service of Spool of printing does not work.".  I can't find anywhere in the menu helps an answer to this problem.  Any help would be greatly appreciated.  I must mention that I restore the computer to an earlier time and he has not made a difference.

  To activate the Print Spool Service, follow these steps:

  1. click on the Start Menu, click Run, type "services.msc" and press ENTER.

  2. in the Services pane, click on "Alert" and scroll down until you see "print spooler".

  3. click on "Start service" or "Restart Service", as the case may be.

  The print spooler service should now be enabled.

  Check if the printing problem is resolved.

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Printer Spooler service does not

  No apparent reason, I can print is no longer.  In Panel, printers and fax machines, no printer is listed despite the fact that there were at least two.  If I try to add a printer, I get the message Printer Spooler service does not. I was on the Microsoft site and loaded a convenience store who confirmed that the Printer Spooler service did not work but cannot fix it.  Not very useful at all.  Can anyone help.  I saw that a lot of old messages about this problem so it is not unique, but I'm really really stuck.

  You can start the print spooler by using different techniques, which one is suggested by Saurabh Joshi.

  Unfortunately, restart the print spooler generally fails to resolve the problem that caused the print spooler to stop in the first place.

  Apart from malware (and you'd be well advised to scan your system to update MalwareBytes Anti-Malware and SUPERAntiSpyware), are two likely reasons that your print spooler stops printer driver has corrupted and (b) corrupt print job stuck in the print queue.

  Start by removing the print queue.  With the print spooler stopped, go to C:\Windows\system32\spool\PRINTERS and delete the contents of the folder.  Do not delete the folder ...\PRINTERS himself.

  Then, clean and reinstall the drivers for your printer.  See the instructions at http://www.coribright.com/windows/Article_One.htm
  If you have a Lexmark printer, see this article for special instructions: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Error message: Printer Spooler Service does not

  Hello

  I searched all Q and has this problem but nothing helped;

  just installed new printer wireless (see screenshots below) and by following a few tips I've tried all

  .. .my under Services administrative tools does not show a printer spooler entry to set on automatic...! ?

  the scanner is recognized and works very well, but the printer does not work

  any suggestions please?

  sincere thanks

  Harry

  

  Thanks for your good advice, I found finally last Brother driver package did not expect to the new printer to come with updated installation disk... Well it is for hunting for cheap product...! :)

• my printer does not, print says no driver found and implemented to update spooler.

  Original title: all of a sudden my printer does not print says no driver found, went to the website of downloaded lexmark driver but still does not print. conjecture.

  I try to print, but it seems that the computer and the printer are not on the same page.
  This just started about 4 days ago.
  Spooler has something to do with it, I got a pop for updating the spooler or not and not clicked by chance do not know how to find it so I can update.
  Not really in all the tech stuff, any help would be grateful.

  Hello

  Do you remember the full error message with spooler?

   

  Method 1: Run the following fix - it:

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

   

  Method 2: See the following article:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

   

  Method 3: As it happened four days before, restoring the computer to a date where it worked fine before.

   

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• OfficeJet 8610: 8610 printer does not print

  just install the new printer.

  Printer indicates it is connected on the wireless

  Wireless computer.

  Printer does not print.

  Tried to bugs in the HP, installed the full pilot.  Nothing happens.

  Can someone, please?

  go to services in your computer, scroll down and choose the (highlighted) print spooler, click on restart (in the new box top-left

  that opens).  Wait & page, print.  You may need to choose stop and then restart.