pilot of spool printing does not start

Similar Questions

• Spool of printer does not start automatically

  Original title: printer spool does not start with the computer

  I have a HP dv6000 with a defective printer spool.

  If I restart or logoff, the spooler is not running and must be launched manually.
  I put the auto service and delay start, but after the change.

  Hello

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. you receive an error code or message?

  3. What is the brand and model of your printer?

  Please follow the methods and mark the question below:

  Method 1:

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

   

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

   

  I hope this helps.

• Spooler services printing does not start, error Code 1053

  Original title: Error 1053

  Hello

  my print spooler services do not start. Any help appreciated.

  Hi Paul,.

  Thanks for posting your query in Microsoft Community.

  I understand that you are facing problems with the Printer Spooler service and receive the code error 1053.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. what version of Windows operating system is installed on the computer?

  2. What is the brand and model of the printer?

  3 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest to run the printer Troubleshooter and check if the problem persists.

   

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can also see the following article for more information:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2: You can try running the following commands and check if the problem occurs and also to see if the printer comes back online after

  a. click the Start button, and type cmd in the box start search

  b. right click on cmd in the list programs and select run as administrator

  If you are prompted for an administrator password or a confirmation, type your password or click continue

  c. at the command prompt, type the following commands and press ENTER after each one

  net stop spooler

  and then

  net start spooler

  This will stop and restart the print spooler service. If this solves the problem of the printer is offline, please let us know.

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

• Error 1068 print spooler service does not start

  original title: PROBLEM WIT THE PRINT SPOOLER

  I HAVE A SYSTEM TO BOOT WINDOWS VISTA AND I GOT THE PRINTER LEXMARK X 1130 INSTALLED.

  I BOUGHT THE LEXMARK INTERPRET S405, AND I REMOVED ALL OTHER PRINTER DRIVERS AND INSTALL THE DRIVER FOR THE S405, BUT THE I STARTED HAVING A PROBLEM THE THE PRINTER SPOOLER DID NOT WANT TO INSTALL THE NEW PRINTER AND ME GIVES ERROR 1068THE SPOOLER SERVICE WILL NOT START. I CONTACTED LEXMARK TECHNOLOGY CENTER AND THE TECHNICIAN TRIED TO HELP ME, BUT NO LUCK. Help, please

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1:
  Check the hardware
  Step 2: Use a troubleshooting tool
  Step 3: update
  drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows
  Tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows
  Technical problems of Vista and troubleshooting - printing
  http://support.Microsoft.com/ph/11732#tab11

• spooler print does not preach

  When I want to print, there is a message that the spooler printing is not enabled.

  I go to computer management, Services, and spooler = activate automatically.

  It makes no difference

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• the spooler service does not start how

  When in the properties of the spooler service I did start one here does not and shows me the message error 1503

  Comment do car because of this I cannot use my printer: scan or print

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

  Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below: (en)

  http://answers.Microsoft.com/fr-FR/windowslive/Forum?tab=unanswered

  http://support.Microsoft.com/common/international.aspx

• PRINT SPOOLER service does not START, ERROR: 1058 - Service cannot be started.

  OS = XP SP3

  Laptop = Dell D500

  As directed by Microsoft and Dell knowledge base, I deleted the printer spools and pilot; and edited my registry, remove the drivers and monitors printing.  I also followed a process dictated by the KB919750, nothing helped.

  I am unable to add printers, because of this problem.

  I keep getting the same error messages...

  "Cannot start service on Local computer print spooler.

  "ERROR 1058: cannot start Service.

  OS = XP SP3

  Laptop = Dell D500

  As directed by Microsoft and Dell knowledge base, I deleted the printer spools and pilot; and edited my registry, remove the drivers and monitors printing.  I also followed a process dictated by the KB919750, nothing helped.

  I am unable to add printers, because of this problem.

  I keep getting the same error messages...

  "Cannot start service on Local computer print spooler.

  "ERROR 1058: cannot start Service.

  PML: thank you.  Your suggestion to confirm that the device was also PERMITTED did the trick!  I can now and have ADDED a printer.  Thanks again!

• L7780 all-in-one printer does not start make

  The printer is stuck in an infinite loop of starting with the control panel not showing that the HP screen with the rolling radius, the power button light flashing and a paper feeding mechanism works and sometimes fax will beep every 30 seconds. The printer then repeates the sequence.

  I tried to reset the options # + 3, # 6, # + 9 but the best response is the screen display language in the background selection masked by the message "power off, and then click" Control Panel.  Accepts power takes and the boot in the infinite loop sequence.

  Connection to the laptop to try to diagnose or install a new firmware is failed course because the printer performs the computer starts arguing with her.

  Have another short of options that may disconnect the on-board battery to clear no matter what memopr, however I do not see the battery.

  Problem solved by removing the printer part to extract the circuit board and remove the battery for a few minutes.  Reinstall the battery and the circuit printed then restarted with # option + 6.  Control found on the printer.

• Power Manager, software of finger printing does not start

  Hi all

  I was faced with a problem recently on my x 220 install win7 32 bit. Power Manager (3.66), software of fingerprints as well as the graphic Properties utility intel is unbootable. FN + F3 displays nothing more.

  I am only able to see the splashscreen and then nothing happens and the process stops.

  I tried to uninstall and reinstall either manually or through lenovo software update without success

  I wasn't able to find a log file in C:\Program Files\ThinkPad\Utilities or the windows event viewer.

  I thought it might be related to a recent update .NET, but I have tried several versions with no success (currently using 4.0).

  Do you have any idea what I can do for troublesshot/fix this?

  Kind regards

  OK, so I could fix the problem by disabling the Windows Presentation Foundation 3.0.0.0 Cache of police service in services.msc.

  Since then, everything works, Power Manager, fingerprints, tool box...

  I guess an update of recent security reactive .NET service and my cache is corrupted somehow.

• Failed to load printer - clicking Add indicates a Printer Spooler Service does not.

  Upgrade Windows XP to SP3 last night.  Now all in printers and faxes has disappeared.  Click on add a printer indicates the Spooler Service does not.   Went in and forced a start; Add the said printer still does not.

  Deleted old printer drivers (Lexmark).  Downloaded updated.  Execution of Lexmark is set up; said the spooler does not (yet), tries to start.  Then, the installation fails saying "No. valid Ports for the driver.

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  I think that your problem is related to the way that Lexmark install printers, as explained in this excerpt from the article linked in step B below (step numbers refer to article in full):

  If you have a Lexmark printer, these additional steps may be necessary (thanks to Robert Orleth [MSFT] to provide this information).  Sometimes, the Lexmark printer installation process installs a service that makes dependent Print Spooler service itself.  If there is a problem with service Lexmark or a Lexmark printer driver (or you have removed using the procedure above), Print Spooler service does not start (see also http://support.microsoft.com/default.aspx?scid=kb;en-us;324757).  The steps below make Print Spooler service only on service (RPCSS) remote procedure (RPC) call, which is normal.  Print Spooler service dependencies are stored in the registry at

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler\DependOnService

  The sc config step 16 command resets the value for this entry.

  1. Open a command prompt window

  2. the control key
            sc config spooler depend = RPCSS
        (Note the space after the = not before)

  3. Restart print spooler (see steps 8 and 9 above)

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Print spooler does not start

  I have problems printing due to the fact that the print spooler does not start even after restart pc & try manually in the services, there he gives me error 1053. It is configured to start automatically in the print spooler box, so I don't know.

  Hi Wobblesmf,

  Welcome to Microsoft Community where you can find all the answers related to Windows.

  According to the description, it seems that the print spooler does not start.

  However, we need more information about the issue to help you better.

  Please help me to answer these questions.

  1. what version of Windows are you using?

  2 have had any changes made to the computer before the question?

  Visit the link for the operating system that you use:

  http://Windows.Microsoft.com/en-us/Windows/which-operating-system

  I have this link which should guide you in the right direction.

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: The steps mentioned in the link is for Windows 7. You can change the version of the operating system in the same link by clicking on the button beside Windows 7 drop-down and select the one that you use.

  Using the windows-related issues feel free to post on Microsoft Community.

• print spooler does not start with error 1068

  RPC server is unavailable and not resumed to installed printer. does not load because the rpc unavailable printer. tried to start the spooler, but had the error code 1068. Also, I can't access windows update after an error 0x80072EFF.

  Hey Robcon,.

  Excellent new (I suppose) you have fixed the problem :) - can you tell me if it is the control or repair install solved your problem?

  --> I hope this helps! Please mark it as correct answer or vote if it does :)<>

  http://www.pcuk.biz - my website
  

  Info from Microsoft about phishing . Information from Microsoft on the fake security software

• Windows 7 printer spooler does not start

  just my printer spooler does not start in Windows 7.  I received a message that the spooler wasn't running when I tried to use it today.  I used the printer for a few days. "net start spooler" fails from the administrator command prompt.  I checked that the CPP is running.

  I installed SP 1 yesterday with success, but I went back to the restore point, but still, the spooler does not start.

  The system acts as the spooler is missing.

  How can I solve this problem?

  Thank you

  Jim

  I would like to check the status of the Services.

  Click on the Start button and select Control Panel, administrative tools, Services. Locate bridge end RPC Mapper in the list. Check that he started and that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started.

  Repeat the procedure for DCom server process Launcher.

  It is always sensitive in this situation to achieve a malware check.

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:
  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/

  Currently, this is a good combination that seems to detect more malware, but it can miss the malware as all security software can do.

• Equium M40X: Cannot print - not done. Print Spooler service does not

  My notebook Equium M40X has suddenly decided to stop from allowing me to print, gives me the message "operation was not completed. "print spooler service does not. I get this message even when you try to install the original installed printer drivers.

  To resolve this problem, I went to the services.msc to attempt to start the print spooler, but the command is not here present and seems to be missing. I also tried to launch it by clicking Start and then run and typing "net start spooler", but even once, it does not. Can anyone help with this?

  My laptop is an Equium M40X and the operating system is Windows XP Service Pack 2.

  Hello

  This error occurs because the spooler service has not been started or has stopped working.
  It seems that this error is known to Microsoft and they decided to public an article in the knowledge base that could help solve this problem.

  http://support.Microsoft.com/kb/314876

  As you say that the spooler service must be restarted.
  To start the spooler service, follow these steps:
  1. click on start and then click Control Panel.
  2. double-click Administrative Tools and then click Services.
  3. double-click on the Printer Spooler service and then change the startup type to automatic. This option sets the spooler service starts automatically when you restart the computer.
  4. If you want to start the spooler service immediately, click the Start button under the Service status field

  If you will not be able to restart the spooler service, you can try to restore the Windows operating system to the point initially by using the Windows System Restore tool.

• Print Spooler service does not

  All of a sudden my computer says print spooler service does not.  There are no printer.  What in the world happened and how to I fix that?

  Hi Mark,

  Try to reset the spooler Services service, click Start-> Run Type & -> services.msc-> ok.

  Locate the printer spooler on the right side-> right click and select Restart-> now Double click on Print spooler-> select automatic for startup type.

  If give you the error, try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.

  I hope this helps.