SQL Developer: Enter the Substitution Variable

Similar Questions

• How to adjust the timing of the migration of the Substitution Variables in the planning

  Hello
  After we update Variable of Substitution, we noticed that it take a 5 minutes before it flows planning
  I read somewhere that there is a way to adjust the altimeter (5 minutes) of the migration of the Substitution Variables in the planning. Someone knows where it is?

  Hello

  You must set a property, the details are all here:-http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch06s03s12.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Enter i: Substitution Variable (capital letter I for Indigo)

  Hi all
  
  I need emergency to run a query in SQL Developer today, but one of my ' case... when ' clauses which I had to slightly modify is originally the query request a Substitution Variable. I have never seen it before and that you see that no fault in my code so I am confused and getting frustrated why this problem appeared suddenly today on the performance reports.
  
  The original clause works very well:
  

                    ,case when lower(class_name) like ('%funding note%')
                          then 0
                          else orig_bal
                    end orig_bal_amd

  I changed it to this:
  

                   
   ,case when geo_segment_name in ('NorthAmer')
                          then case when bus_grp_typ in ('CMBS')
                                    then case when c_bond_type_desc not in ('P&I') 
                                              then c_notional_amount
                                              else orig_bal
                                         end
                                    else case when lower(class_name) like ('%funding note%')
                                              then 0
                                              else orig_bal
                                         end
                               end
                          else orig_bal
                    end orig_bal_amd

  or this:
  

                    ,case when geo_segment_name in ('NorthAmer')
                          and bus_grp_typ in ('CMBS')
                          then case when c_bond_type_desc not in ('P&I') 
                                    then c_notional_amount
                                    else orig_bal
                               end
                          else case when geo_segment_name in ('NorthAmer') 
                                    and lower(class_name) like ('%funding note%')
                                    then 0
                                    else orig_bal
                              end 
                    end orig_bal_amd  

  also, strangely what amounts to what above to be syntactically identical to the first cause (work) more simple, is also causing the problem of substitution.
  

                    ,/*case when geo_segment_name in ('NorthAmer')
                          and bus_grp_typ in ('CMBS')
                          then case when c_bond_type_desc not in ('P&I') 
                                    then c_notional_amount
                                    else orig_bal
                               end
                          else */case --when geo_segment_name in ('NorthAmer') 
                                    when lower(class_name) like ('%funding note%')
                                    then 0
                                    else orig_bal
                              end orig_bal_amd         
                    -- end orig_bal_amd  

  does anyone have an idea why this is happening? I really need to get this data race and I have no idea what is causing this problem.
  
  Thank you very much in advance for any ideas.
  
  Jon
  
  Published by: berlinhammer on January 4, 2011 05:17

  Hello

  Change the condition

  c_bond_type_desc not in ('P&I')
  
  to
  
  c_bond_type_desc not in ('P'||'&'||'I')
  

  The reason in & I is treated as a parameter that requires a value or as you say substitution.

  see you soon

  VT

• Assign the substitution variable to another variable of substitution with truncation of value

  I launch sql * more script .sql through a competitor job. Simultaneous work provides date a parameter to the script.  Task log displays the date passed to scrpit as:

  Arguments

  ------------

  2013/09/01 00:00:00

  For aesthetic purposes in the position of the output, I want to convert/truncate the string in a format for the end user of the 09/01/2013.

  Try to simply change a variable substitution

  (below does not work, but we hope to Telegraph my intention):

  Undefine Low_date
  Set Low_date = ' 2013-09-01 00:00:00 '
  Undefine Low_date_10
  Set Low_date_10 = "yyyy-mm-ds."

  Select substr ('& Low_Date', 1, 10) in & double Low_date_10;

  Guest of "value of the Variable is: & Low_date_10.
  /

  WHICH PRODUCES:

  old: select substr ('& Low_Date', 1, 10) in & double Low_date_10
  New: select substr ("2013-09-01 00:00:00 ', 1, 10") in yyyy-mm-double ds

  Error from the 8 in the command line:
  Select substr ("2013-09-01 00:00:00 ', 1, 10") in yyyy-mm-double ds
  Error in the command line column: 8:55
  Error report:
  SQL error: ORA-00905: lack of keyword
  00905 00000 - 'lack the key word'
  * Cause:
  * Action:
  old: prompt "value of the Variable is: & Low_date_10.
  New: prompt "value of the Variable is: yyyy-mm-ds."
  "Value of the variable is: yyyy-mm-dd"

  "I need to get to" value of the Variable is: 01/09/2013.

  Hello

  SELECT... IN works in PL/SQL.

  In SQL * Plus, you can use the COLUMN... New_value, like this:

  SET low_date = ' 2013-09-01 00:00:00 '

  COLUMN low_date_10_col new_value by low_date_10

  SELECT REPLACE (SUBSTR ('& Low_Date', 1, 10))
  , '-'
  , '/'
  ) AS low_date_10_col
  DOUBLE;

  Value of the PROMPT Variable is: & Low_date_10

• Oracle SQL Developer to the database unifying connection

  Hello community!

  I am developing a SQL string that will pull data from various processes of cost (i plan to wrap the dataview object in a cube and publish a dashboard after that). I was wondering if there is any way to connect oracle SQL Developer for oracle hosted instance unify to create code more efficiently? If so, explain the steps for me please?

  I can get the following information of Oracle BI Publisher, see Exhibit A.

  I have to fill in the fields in Appendix B and this is where I don't know how to do this, see Exhibit B.

  Your help is highly appreciated

  Concerning

  Amir

  Hi Amir - there is currently no way to directly connect to the DB for unifying hosted environments. We are currently working on this issue.

  In the meantime, you can use the SQL Editor in your BI Publisher server interface. You build instructions SQL can then be pasted in via data in unifying views.

• Look at a USER_SCHEDULER_ * in SQL Developer through the GUI

  
  SQL Developer: Version 3.2.20.09
  Oracle DB: Oracle Database 10 g Enterprise Edition Release 10.2.0.5.0 - 64 bit

  Question:

  When I connect to the database I don't see "DBMS Jobs" to the title of 'Planner' (in GUI). There are projects Planner user-defined settings and I get good results when I query the tables like USER_SCHEDULER_JOBS. I just can't view/edit them the GUI.

  My only thought is that this DB has been improved over the years (from 8.x to 9.x to 10.x) and a type SYSTEM table SQL Developer turned to in order to see if the jobs at the request of the user are still an option (and it is not properly defined or my account does not have rights to see).

  Or maybe there is a hidden options of SQL Developer which says "show only jobs of DBMS?

  Thanks for any help.

  You can try this

  For windows

  In a cd to the command window/sqldeveloper/bin

  Break-in sqldeveloper - su

  Add the argument - su, this will create a new set of saved settings.   You will need to re-coonect to the DB and see if the menus appear under Scheduler.

• How to remove the substitution variable invite it the coil to a script

  Oracle 11 g 2
  
  Hi all.
  
  I'm trying to spool the results to a file in another file, but I don't want to take the
  
  'Enter' value dethrone the clause with it in the new file.
  
  Y at - it a setting that I could put in SQLPLUS? I tried together check off the coast and who remains a single line.
  
  Thank you

  Hello

  You can also use the SQL * more ACCEPT the command to the input of a value before spoooling:

  ACCEPT  start_date PROMPT "Enter the starting date (e.g. 11-Mar-2010): "
  ...
  
  SPOOL  fubar.lst
  
  SELECT  ...
  WHERE   entry_dt >= TO_CHAR ('&start_date', 'DD-Mon-YYYY') ...
  

• Member with the substitution variable formula

  Hi all
  
  I gave member formula 'Budget'-(& Forecast); one of the members of the scenario Dimension. When I update the database of planning, in Essbase, I saw the following message
  
  !! UNLOADED FORMULA.
  
  But the formula came to that Member as * 'Budget'-(& 'Forecasts'); * Why quotes came around my substitution variable.
  
  Thank you and best regards,
  Konrad.

  Hello

  You have certainly set up a variable substitution in EAS called forecast that is assigned to the planning application.
  You can test it by manually by first creating the formula in environmental assessments and checking the outline.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Essbase 7.1.6 - the substitution variables, as in the access filters

  Hello
  
  I use Essbase 7.1.6, as mentioned above. Currently my writing permissions are based on edu, but for both dense dimensions I have setting and disabling UDAs is a pain (slow restructuring). I thought about the other ways to do this and came with variables. We already use in calc scripts and documentation says it is possible to use in filters too, but it gives no examples to do and I can go as far as the syntax on my own error.
  
  For example: the year variable is set on * "YR08" * member of dense dimension (with the quotation marks, of course). He gives a syntax error when it is used in the definition of the filter as:
  
  & year
  "& year".
  & 'Year '.
  
  
  The result is: error: invalid syntax 1054012 filter 9 online
  
  Any advice? What I do is still possible in this version?
  
  --
  Best regards
  S.

  You can create a maxl script that replaces the filters, when you call the maxl script you could spend a variable such as YR08 and use this variable in the script.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• SQL query simple SQL Developer takes, the wizzard of XE does not work

  Hello everyone
  
  I wrote this simple query that developer SQL works well, but when I try to run a report based on this sql query, it tells me invalid sql statement. It's true, maybe it's not valid because this IF clause in there... but Developer SQL seems to be very tolerant or includes more...
  
  I wrote this is because obviously if there is no Boss, ie = 0 then I would get an error when it division by 0, so I put that 0 just for selecting the right
  
  
  If count (bosses) > 0
  Select company, zip code.
  sum (Boss/staff)
  assessment
  Group of company, zip code
  
  Thank you very much
  
  Alvaro

  Ok. This should work:

  Select company, zip code.
  -case when count (staff)! = 0 here end sum (Boss/staff)
  assessment
  Group of company, zip code

  If this does not work, could you please explain, how your table looks like?

• Add formulas to the Substitution Variables

  Hi all
  
  I use the EPM 11 system. I have a classic planning application. I have my dataform, year during the period and the view of the column.
  
  I need to show the current year, next year and current month (derived from date system) on the form.
  
  To achieve this, I created three variable substitution in the EE * & CurYear, next & CurMonth.*
  
  Say for example if the date system is * 10 October 2009 * so CurYear show FY09 , next show FY10 and CurMonth show Oct.
  
  For now, I've hardcoded the values... but I'm trying to get through a way to get the above date system
  
  Can someone please advice how can I proceed to get variables to work...
  
  Kind regards.
  
  Mirka

  Hello

  How about something like

  SET year = FY % DATE: ~ 8, 2%
  SET months = % DATE: ~ 3, 2%

  *: Remove zero if it exists... *.
  Set /a month = % 1 month - %100

  Set monthstring=Jan@Feb@Mar@Apr@May@Jun@Jul@Aug@Sep@Oct@Nov@Dec

  for /f "tokens = % month % delims = @" % to ("echo.%monthstring%"), do)
  Set months = %% j
  *)*

  echo% % month
  echo% % year

  Say that the year is 2009, this would create a year = FY09
  And months must be converted into a month name

  Ok?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Invalid SQL syntax causes the removal of the view

  I have found that when you change a view through SQL Developer, entering the syntax invalid SQL and hit 'Cancel' causes in my opinion should be deleted. Here are the steps that present this problem for me:
  
  1. create, save, and close a valid database view by clicking right "views" on the Connections tab and selecting «New view...» »
  2. open the view via a right click on the view and selecting ' Edit... »
  3 change to point to a non-existent table
  4 try to save, select "OK".
  5. when presented with an error message, click OK in the dialog box "Edit Error object.
  6. click on 'Cancel' in the window "Edit View".
  7. right click on the view, and then select 'open '. The "SQL" tab is empty, even though you can see the value in the "Columns" tab
  8. after refreshing, the view is a party.
  
  I looked under the problems known and searched the forum to see if it had been reported. Please let know us if there is some setting I can change to avoid this problem. I hope it's a bug, because I can't imagine the changes not saved, causing the removal of the view would be the desired behavior. Please find below my contact information of the environment.
  
  -Matt
  
  Details of the environment
  ==============
  
  The version of SQL Developer: 3.0.04 build HAND - 04.34
  DB version:
  Oracle Database 10g Release 10.2.0.4.0 - Production
  PL/SQL Release 10.2.0.4.0 - Production
  "CORE 10.2.0.4.0 Production."
  AMT for Linux: release 10.2.0.4.0 - Production
  NLSRTL Version 10.2.0.4.0 - Production
  Java version:
  Java version "1.6.0_16.
  Java (TM) SE Runtime Environment (build 1.6.0_16 - b01)
  The Client Java VM (build 14, 2 - b01, mixed mode, sharing)
  OS: Windows XP Pro SP2

  Yes.
  Changed to Bug 12334150: EDIT DELETED THE VIEW DIALOG box ON entering a not VALID AND the CANCELLATION of THE DIA SYNTAX

  -Rambeau

• Reduce code SQL injection when forced to use substitution variables, as

  The 3rd party software that I use has exactly a way to allow users to specify execution settings: the Substitution variables.
  The scripts are executed using SQL * more. I'm looking for ways ensure this.
  
  Please, don't say "do not use substitution variables" - read above, it is the only way this software works.
  
  
  My first thought was something like this:

  var myvar varchar2(30)
  exec :myvar := '&user_input';

  It's no good. What happens if the user specifies "X"; ". run immediately "drop table sometable" then we get

  exec :myvar := 'X'; execute immediate 'drop table sometable';

  Once again, not good.
  
  I thought that perhaps something like the following would work:

  exec :myvar := dbms_assert.noop('&user_input');

  but then again, a malicious user could specify "'); run immediately "drop table sometable"; dbms_assert. NOOP('")
  
  I'm open to suggestions.
  What can I do to clean up the substitution variables?
  
  Thank you!
  
  Edited by: Yes on 30 January 2013 15:02

  If your attacker is able to enter a value for this parameter substitution is too late to worry.
  It can stop the execution of the script and enter a code of maliciious he wants. Or I missed something?

• How to use the substitution in case of construction dim variable

  Hi all

  Lets say I have 3 void / vars - Prevmonth prevmonth-1, prevmonth-2. These change every quarter.

  I want to build a cube that will be who will have only 3 months preceding the fiscal dimension. This will serve once at the end of the quarter.

  What should I do for the substitution if build rules files variables dim? I want to automate the process. We have Sun for other dims build SQL, only the Sun can be built as flat file.

  Or y at - it another way to do this Besides using sub vars? I can try to store 3 variables in a table and then use them to create the cube, but want to see if we can avoid creating an interface more.

  Thank you.

  You can use substitution variables, as in the SQL of the charge state - rules for the Substitution Variables

  See you soon

  John

• How to pass a list as a bind variable in SQL Developer?

  How can I pass a list as a bind variable in SQL Developer?
  
  The following query in SQL Developer so work I put ": prmRegionID = 2.
  
  SELECT COUNTRY_ID,
  COUNTRY_NAME
  OF HUMAN RESOURCES. COUNTRY
  WHERE IN REGION_ID (: prmRegionID);
  
  The problem is that I can't find how to set ": prmRegionID = 2, 3.
  
  I know that I can replace ": prmRegionID" by a proxy '& prmRegionID '. The above query will work well with"& prmRegionID = 2" and with "& prmRegionID = 2, 3". "
  
  But with this solution, I lost all the benefit of the use of bound variables (analysis hard against soft parse, possibility of SQL injection, etc.).
  
  I'm learning how to do this in SQL, as well as the use of UDT in this thread: How to move a list as a bind variable?
  
  But with this solution, I've lost nice SQL Developer user interface. In SQL developer, it is easy to test a query using the standard binding variable. When we start the application, a pop up asking for a value of the variable binding.
  
  With the UDT, the interface request always variable binding standard. You have an idea on how I can get a variable string binding (such as 1, 2, 10) in a set of NUMBER or VARCHAR2? This way I would be able to launch a standard query in SQL Developer to test my application.
  
  
  Can someone tell me what is the best approach to this?
  
  Thank you in advance,
  
  
  MB

  Hi Blais,

  Thank you for trying the SQL and PL/SQL instance before coming here - it was definitely the right approach, and you've got some very good suggestions there. Your needs for a invite only bind to the value in the clause list, I think I have a possible solution. I'll introduce you to a list of characters, so you'll have to tweak it for other types of data. First, add the following to your schema:

  create or replace
  TYPE bind_tab_typ AS TABLE OF VARCHAR2(4000);
  
  create or replace
  FUNCTION comma_to_table(iv_raw IN VARCHAR2)
  RETURN bind_tab_typ
  PIPELINED
  IS
     ltab_lname dbms_utility.lname_array;
     ln_len     BINARY_INTEGER;
  BEGIN
     dbms_utility.comma_to_table(list   => iv_raw
                                ,tablen => ln_len
                                ,tab    => ltab_lname);
     FOR i IN 1 .. ln_len LOOP
        PIPE ROW (ltab_lname(i));
     END LOOP;
  END;
  

  Now you can write a query, say for scott.dept, as follows, and have executed statement ask the value list in the clause as a single binding variable:

  select *
  from dept
  where dname in (
    select * from table( comma_to_table( :BNDS ))
  );
  

  When you are prompted, provide the list of values separated by a single comma without any extra spaces.

  I don't know if the Varchar2 (4000) really needs to be which is great. I use it because that's what dbms_utility.lname_array uses.

  Kind regards
  Gary
  SQL development team