SQL to get more old bucket

Similar Questions

• Where can I get more old firmware for the ea8500?

  I can't wait you can download older firmware from the support page for the router. The only firmware that there are listed is the last but my router works like * beep * with her there.

  I had to restore to the previous firmware, but I would also like the flash of the other partition.

  I don't want this new firmware on my router.

  Is there at - it an older firmware repo secret or someone can give me it?

  This is where it should be on the site Web of Linksys. Just replace the version in the last name of file with the version you're looking for.

  http://cache-www.Belkin.com/support/DL/FW_EA8500_1.1.4.168206_prod.img

• My Vista crashed and I've switched back to XP. Now I have 1mil more old files compressed that I can't get rid of and it slows down the computer. How can I get rid of these files

  My Vista crashed and I've switched back to XP. Now I have 1mil more old files compressed that I can't get rid of and it slows down the computer. How can I get rid of these files.

  Hello

  1 are. what type of files?
  2. when they are stored?

  3. What is the size of these compressed files?

  Try to perform the clean boot on the computer and check if that helps.

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  See the bottom of the articles that might help you resolve this problem.
  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx

• How can I get my old firefox back?

  I don't like this new blue one and has not asked for it, this is all of a sudden. In addition, it has a really strange behavior. For example, just now I have 5 tabs open firefox. The first is a question on your forum. When I clicked on the link "ask a question" at the top of the page, it opens the next page in a new tab. And when I clicked on the find on this page button, it opens another tab again. This tab was asked what product I want support with and open another tab with the next page. And yet 10 minutes ago it worked fine. He retains it, doing suddenly change his mind about how he opens new pages.
  In addition, I can be through a page using the scroll on my mouse wheel, then suddenly it stops scrolling and starts to do the top page or less instead. Why he keep changing his mind on what he does?
  Really don't like this new browser and would appreciate that I could get my old one back that worked perfectly well and really no need to upgrade.

  It is possible that some of the keys to the State and possible other keys have the bad state and consider Firefox as always in a hurry.

  Try pressing all the keys (shift, Ctrl, Alt) state several times to see if that helps to recover from this.
  Is it didn't help and then close and restart Firefox or restart the computer.

  You can watch the classic extension theme restaurateur restore some features that has been lost with the arrival of the Australis style in Firefox 29.

  • Restorer of classic theme: https://addons.mozilla.org/firefox/addon/classicthemerestorer/
  • You can check the settings of the extension of the CTR through the Options/preferences button on the page "Firefox/tools > Modules > Extensions.
  • You can find additional toolbar buttons and additional toolbar settings in customize (Firefox 3-bar menu button > customize)

  See also:

  • https://support.Mozilla.org/KB/how-to-make-new-Firefox-look-like-old-Firefox
  • https://support.Mozilla.org/KB/common-questions-after-updating-to-new-Firefox
  • https://support.Mozilla.org/KB/learn-more-about-the-design-of-new-Firefox

• How can I get my old iMac Mavericks on my new computer El Capitan iPhoto?

  I'm an amateur photo with literally thousands of photos of scenic and nature, all labeled with keywords and manually marked locations (since my DSLR is not an internal GPS and therefore cannot automatically geotag photos) in iPhoto on our old computer that runs on the Mavericks. Recently, we bought a new iMac that runs on El Capitan, and when we moved my data from the old computer, all of my iPhoto library moved into Photos. Unfortunately, because the pictures does not support the manual tagging locations, all hours of work I put in dropping the pins on maps to show the exact location where all my photos have been taken has disappeared. Enter Photos and keywords to adapt to all of the States, cities and specific locations where these pictures were taken just is not practical; my list of keywords would get horribly difficult to handle, and a good number of these photos were taken in "one-of-a-kind" tasks because they were taken on the fly from a moving vehicle. And that is not even taking into consideration all overtime work that would result. There must be someone out there who is dealing with the frustration of having to deal with a system that was designed for the casual snapshot-takers rather than serious photo enthusiasts! I still have the old computer with iPhoto installed on it and all the photos that I put in it until we bought the new computer. Is it possible that I can get the old computer to the new iPhoto? Can I put it on an external drive or DVD and copy it to the El Cap computer as iPhoto, or will it simply push all in Photos or choke and gag on that? I continue to work with my photos in iPhoto on your old computer, and I hope that he does not die in the near future? (And while we're at it, has any outside me informed Apple photos how bad works for those who need features in iPhoto that does not get incorporated in the Photos? I left a note on the comments, but I have no way of knowing if someone is on my suggestion.)

  Click here and try following the instructions; you will only be able to do if you got before where associated with iPhoto on the Mac App store.

  A version of aged more than 9.6 iPhoto does not open in Yosemite and newer.

  (142432)

• HOW TO BRING BACK THE BROWSER MORE OLD?

  REVISED ORIGINAL QUESTION =
  AFTER ALL THE ~ through the MESS you created and YOU in ME SAYING that "in order to have a chance to get the answer to my question ~ to give you ALL THE DETAILS I can ', you REFUSE to accept by saying, ' Please keep the length of your question to 255 characters or less...» » !!! You are ABLE to say that BEFORE I go through all the other MESS? HOW TO BRING BACK THE BROWSER MORE OLD?

  ISSUE INITIAL = I got SEVERAL plugins that WORKED! Then, I 'upgraded' {like you, LAUGHING, claim} to your version of Firefox 4 after promising to you that it is BETTER and, supposedly, an IMPROVEMENT over the old version. After you install the NEW one ~ IT TURNS OUT ALL MY PREVIOUS PLUGINS! Your WISHTHEYWUZ "PROGRAMMERS", very skillfully {and, in fact, HATEFULLY} uh, kinda "forgot" to make the new browser for COMPATIBILITY ASCENDANTE so that it does not DESTROY us, already, had ~ that WORKED before YOU put your hands on it! So, now, * HOW * I get the OLD version back? I think you need to KNOW what you can do with this new 'UPGRADE' which is, in fact, a LIE! UPGRADES don't take you BACKWARDS ~ make things WORSE ~ real upgrades make things BETTER! DUH-H-H!

  ORIGINAL DETAILS =
  I, recently bought, a new HP 4500 printer and it came with an extension to capture video/plugin. Attempt to use, the program informed me that I had to use, either, an IC or a Firefox browser mentioning the version1.5 {I think it was} or later. The Firefox browser I was using was 3.something; then, everything was going along FINE. When I installed the video capture program, she added the plugin for the browser ~ PERFECTLY! I had too MUCH other plugins that worked and I used somewhat regularly! NO MORE! YOU and your TOTALLY INEPTE, WISHTHEYWUZ 'PROGRAMMERS' STOLE half of my COMPUTER! I can't, is more, USE ALL OF THOSE PLUGINS, simply because you "forgot" {say} to INCLUDE in your new browser version 4. WHAT WAS WRONG WITH THEM? WHY DON'T * YOU * WANT ME TO BE ABLE TO USE THEM, MORE?

  Apparently, YOU think that the computer world revolves around YOU, and YOU are its AXIS! You feel that YOU have NO RESPONSIBILITY to make YOUR programs in no way compatible with what is already available ~ according to the "advice", I noticed on one of YOUR pages WHILE REACHING THIS ONE, you said that everyone must adapt to YOUR claimed "improvements" that are just DESTROY!

  All I want is for YOU to either MAKE YOUR VERSION 4 COMPATIBLE; or advise me on HOW to get the EARLIER back version that * IS * compatible. Otherwise, I'll switch to another browser and advise all the others that I have one any influence to do the same for the good of their overall computer enjoyment!

  PLEASE ADVISE!

  I see that you have provided this window} {below a space for, probably, a UNIQUE Extension / Plugin.} Therefore, a PARTIAL LIST follows ~

  ArcSoft video 2.0.0.8 Downloader extension
  Copy into Wordperfect Lightning 1.0
  Google Photos Screensaver 2.0
  HP Smart Web Printing 4.5
  iWinGames Plugin 1.5
  Microsoft.NET Framework Wizard 1.2.1
  2.0.0.11 RAW thumbnail viewer
  Real Player browser Record 1.1.3 Plugin
  TVU Player 2.5.3.1 Web
  Yahoo! Toolbar 2.1.3.20100310105313

  http://support.Mozilla.com/en-us/KB/installing+a+previous+version+of+Firefox

  http://www.Mozilla.com/en-us/Firefox/all-older.html

• How to get the old BIOS for Satellite P100-454?

  Hi all.

  I want to downgrade my BIOS of 4.7 to the original.
  But I have no file bios.bak more and I can't find any old BIOS on the Toshiba site.
  How and where can I get the old BIOS?

  I have a P100-454 runing Vista.

  /Rasmus

  When the new BIOS update came out an old is no longer available.
  What you can try is to contact nearest Toshiba authorized maintainer.
  They have access to the database of Toshiba and they can help you with it.

  Call and ask.

• In plain English please can someone tell me how I can get more space on my PC?

  Hi I run Windows XP, 34.4 GB that I have only 12.4 free GB file system is NTFS. I have Service pack 3.

  When I go into add or remove some programs, it seems to last forever. With 4 or 5 year old stuff.

  Sometimes, when you install things he'll say «if you already have the old version, you can remove it after installing the newest one...» What I want to know I can do it with service packs?

  I clean my pc almost on a daily basis, as removal of games I don't play anymore, but it doesn't seem to make a big difference. so any help on how to get more memory or ram or what ever it's called would I hope be useful. Thank you, John

  PS computer is about 6 years old, in the way, and it's a DELL

  12 GB of free space is allowed to have.

  It is roughly 1/3 of your total hard drive.

  so I do not know why 12 GB of free space is not enough for you.

  However, if you want more then you can download / move your personal files, such as documents, pictures, music, etc. up on Skydrive from Microsoft site for free.   Then you will have 25 GB of virtual space to store and access your personal files.

  In addition, you can always add a second hard drive to the computer.  All computers are shipped with the ability to install secondary hard drives.

  If I remember, I saw a 1.5 terabyte of hard drive for sale online on Newegg for about $ 50.   But you will not need such a big big hard drive and I don't think that xp can manage a large hard without him being re-partitioned drive.

  However, as you can see, the hard drives are pretty cheap now a days.

  There are also portable hard drives as well.   If your pc has usb connectivity, then you can so simply plug and play one of these types too.

  By the way, if you decide to add another hard drive, be they internal or external, inform people of the store that your operating system is XP to make sure that the device is compatible.

• HP Photosmart 7520 "Get More" icon for apps

  Old printer for only a few days.  The "Get More" icon on the online app on the home page the first day, but after the second day, he has disappeared from the App bar.  Any suggestions on how to recover the "Get More" (icon) app?  I use the printer wirelessly with an iMac OS X Lion 10.7.5.  Checked the HP connected in Apps for my printer, but it's not a way to reinstall the application "Get More"; It is not listed in the App section.  Thank you!

  Yes AnnaMarie57, to add applications to the Photosmart 7520 you should not use the website hpconnected.com. It really makes it easier (though a little less convenient), with a full text search to find and add apps on your printer. Have you ever subscribed to hpconnected.com and added to your printer?

• Is it possible to get the old windows 7 hard disk new?

  I have a pc hard drive has crapped out, and I'm looking to buy a new hard drive and I was wondering if I have to buy a new os or y at - it a way to get the old windows 7 on the new pc.

  Original title: a few questions about reinstalling windows

  If your computer is pre-installed with Windows 7, you should be able to use the product key located on the COA sticker that is attached to the system unit and reinstall Windows 7.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• How to get more information about the user using SecurityContext ADF?

  Hello.

  In my application I have a table use:

  CREATE TABLE ("ADM_USERS"

  ACTIVATE THE 'ID' NUMBER(*,0) NOT NULL,

  ACTIVATE THE 'U_NAME' VARCHAR2 (30 BYTE) NOT NULL,

  ACTIVATE THE "U_PASS" VARCHAR2 (255 BYTE) NOT NULL,

  VARCHAR2 (30 BYTE) "NAME."

  VARCHAR2 (30 BYTE) 'NAME')

  I configured the WebLogic environment using the the "reading- SQL only the authentication provider ' and then I configured ADF Security as ADF authentication -> Forms -authentication.

  I connect the user using the method of ""doLogin " and all that working properly. "

  
  

  public String doLogin() {}

  String _username =;

  Byte [] pw = _password.getBytes ();

  FacesContext fctx = FacesContext.getCurrentInstance ();

  HttpServletRequest request = (HttpServletRequest) () .getRequest () fctx.getExternalContext;

  try {}

  Topic topic = Authentication.login (new URLCallbackHandler (UN, pw));

  ServletAuthentication.runAs (object, request);

  String loginUrl = "/ adfAuthentication?success_url=/faces/Registry.jsf";

  HttpServletResponse response = (HttpServletResponse) fctx.getExternalContext (m:System.NET.FtpWebRequest.GetResponse ());

  sendForward (request, response, loginUrl);

  } catch (FailedLoginException fle) {}

  FacesMessage msg = new FacesMessage (FacesMessage.SEVERITY_ERROR, "Incorrect name or password","Incorrect name or password" "");

  fctx.addMessage (null, msg);

  } catch {} (the LoginException)

  reportUnexpectedLoginError ("LoginException", the);

  }

  Returns a null value.

  }
  

  securityContext.userName returns the value of the 'U_NAME '.

  How to make more information on the user connected such as NAME, ID, first NAME?

  
  

  And the second question:

  How to store the value of the field 'ID' in table 'ADM_USERS' in any table with the 'IDUSER' with objects of entity created in application scope?

  
  

  Concerning

  Darek
  

  
  

  securityContext.userName returns the value of the 'U_NAME '.
  How can I get more information about the user logged as NAME, first NAME, ID?

  You can not.

  You need to query DB.

  How to store the value of the field 'ID' in table 'ADM_USERS' in any table with the 'IDUSER' with objects of entity created in application scope?

  Record this value in UserData structure so it will be available in the model. http://andrejusb.blogspot.com/2012/05/solution-for-sharing-global-user-data.html

  Then use as default expression for your objects of entity attributes (something like: adf.userSession.userData.yourUserDataVar).

  Dario

• The archive logs shipped but more old logs do not applied...

  Environment:
  
  Oracle on Solaris 11.2.0.3 10.5
  
  The Data Guard environment working fine for 6 months.
  
  I recently had problems with disk space on the day before and had to copy some files from newspapers of the archives to a mount point different that had been shipped to the waiting, but not yet applied because I had to cancel the paper application process.
  
  After having cleared the space problem and start log shipping and return application log on (change database recovery managed to sleep...) I have the new logs shipped but my watch is a bunch of log files behind. I can see it in the V$ ARCHIVED_LOG on intelligence, where the last seq # applied is 8083 in my case and the more current seq # is currently more than 8200.
  
  I have all the archives always connects in 'other' the mount point and can move back the directory the correct archive according to needs.
  
  Since the next file that the application requires is seq # 8084, I moved this file in the/arch directory awaits the day before 'see' and apply it. No luck.
  
  By searching in the alert log just before after execution of the 'alter database recover managed standby database disconnect;' I see the following:

  Media Recovery Waiting for thread 1 sequence 8084

  and also:

  Fetching gap sequence in thread 1, gap sequence 8084-8084

  and just below that:

  FAL[client]: Error fetching gap sequence, no FAL server specified

  I thought I read in the docs that the FAL_SERVER and the FAL_CLIENT are no longer needed. (?)
  
  I also found a CKPT script that lists information about DG Environment. For the primary side to hang on, but the day before one produces this output:

  NAME                           DISPLAY_VALUE
  ------------------------------ ------------------------------
  db_file_name_convert           /u01/oradata/APSMDMP1, /u01/or
                                 adata/APSMDMP1, /u02/oradata/A
                                 PSMDMP1, /u02/oradata/APSMDMP1
                                 , /u03/oradata/APSMDMP1, /u03/
                                 oradata/APSMDMP1, /u04/oradata
                                 /APSMDMP1, /u04/oradata/APSMDM
                                 P1
  
  db_name                        APSMDMP1
  db_unique_name                 APSMDMP1STBY
  dg_broker_config_file1         /u01/app/oracle/product/11203/
                                 db_2/dbs/dr1APSMDMP1STBY.dat
  
  dg_broker_config_file2         /u01/app/oracle/product/11203/
                                 db_2/dbs/dr2APSMDMP1STBY.dat
  
  dg_broker_start                FALSE
  fal_client
  fal_server
  local_listener
  log_archive_config             DG_CONFIG=(APSMDMP1,APSMDMP1ST
                                 BY)
  
  log_archive_dest_2             SERVICE=APSMDMP1 ASYNC VALID_F
                                 OR=(ONLINE_LOGFILES,PRIMARY_RO
                                 LE) DB_UNIQUE_NAME=APSMDMP1 MA
                                 X_CONNECTIONS=2
  
  log_archive_dest_state_2       ENABLE
  log_archive_max_processes      4
  log_file_name_convert          /u01/oradata/APSMDMP1, /u01/or
                                 adata/APSMDMP1
  
  remote_login_passwordfile      EXCLUSIVE
  standby_archive_dest           ?/dbs/arch
  standby_file_management        AUTO
  
  NAME       DB_UNIQUE_NAME                 PROTECTION_MODE DATABASE_R OPEN_MODE
  ---------- ------------------------------ --------------- ---------- --------------------
  APSMDMP1   APSMDMP1STBY                   MAXIMUM PERFORM PHYSICAL S READ ONLY WITH APPLY
                                            ANCE            TANDBY
  
  
     THREAD# MAX(SEQUENCE#)
  ---------- --------------
           1           8083
  
  PROCESS   STATUS          THREAD#  SEQUENCE#
  --------- ------------ ---------- ----------
  ARCH      CLOSING               1       7585
  ARCH      CLOSING               1       7588
  ARCH      CLOSING               1       6726
  ARCH      CLOSING               1       7581
  RFS       RECEIVING             1       8462
  MRP0      WAIT_FOR_GAP          1       8084
  RFS       IDLE                  0          0
  
  NAME                           VALUE      UNIT                           TIME_COMPUTED                  DATUM_TIME
  ------------------------------ ---------- ------------------------------ ------------------------------ ------------------------------
  transport lag                  +00 00:01: day(2) to second(0) interval   08/16/2012 13:24:04            08/16/2012 13:23:35
                                 59
  
  apply lag                      +01 23:08: day(2) to second(0) interval   08/16/2012 13:24:04            08/16/2012 13:23:35
                                 43
  
  apply finish time              +00 00:17: day(2) to second(3) interval   08/16/2012 13:24:04
                                 21.072
  
  estimated startup time         15         second                         08/16/2012 13:24:04
  
  NAME                                                            Size MB    Used MB
  ------------------------------------------------------------ ---------- ----------
                                                                        0          0

  I do not use a fast recovery area.
  
  What should I do to get the old logs to check-in begins to apply again?
  
  The alert log says something about "Adding value to the media", but I don't know why I would need that since I have the log files itself.
  
  Any help is appreciated.
  
  Also, I spend a significant amount of time to read through this forum and many articles on the web but couldn't find exactly the solution I was looking for.
  
  Thank you very much!!
  
  -gary

  Try to save the log file

  alter database register logfile 'full path for the 8074 sequence.

  and check select message from v$ dataguard_status;

• How can I get how old I am until today?

  How can I get how old I am until today? Is a simple function for this in plsql?

  As the days between...

  SQL> ed
  Wrote file afiedt.buf
  
    1  select sysdate-date '1973-02-01' as days_between
    2* from dual
  SQL> /
  
  DAYS_BETWEEN
  ------------
    13741.4601
  
  SQL>
  

  Months between...

  SQL> ed
  Wrote file afiedt.buf
  
    1  select months_between(sysdate,date '1973-02-01') as months_between
    2* from dual
  SQL> /
  
  MONTHS_BETWEEN
  --------------
      451.498724
  
  SQL>
  

  Years between...

  SQL> ed
  Wrote file afiedt.buf
  
    1  select months_between(sysdate,date '1973-02-01')/12 as years_between
    2* from dual
  SQL> /
  
  YEARS_BETWEEN
  -------------
     37.6248945
  
  SQL>
  

• Why apple ask meid on my iPad, to get more space free email?

  Why Apple asked for meid get more free space for my email?

  Where do you see the issue? Did you receive an email requesting your ID?

• can I delete photos on my iPhone that I saved on iCloud?   So, get more storage on my iPhone

  Can I delete photos on my iPhone 6 s which I saved on iCloud?  ... well, getting more storage on my iPhone?

  No, because it would remove them from the photo library iCloud

  You can try to save storage by going to settings > Photos and camera > storage optimize