Square around an object box?

Similar Questions

• String of text around an object?

  Hello! I tried to create a box around a shape, in this case a car. It's a bit like making a text to wrap an object autour , not along it, not on the border. I want the text to be everywhere, except on the object.

  But every time I have to create the path and click the cursor somewhere on the way to work the text comes from if poster normally and don't deform. I saw a lot of videos on YouTube all that but they never wrap the text around the object in its entirety, they make the text box on one side. Is it possible to create the area of text around the object in its entirety and not only on either the left or right of it?

  Info:

  I chose the path of work before you click in it.

  I tried to make a selection in shape, but it did not work like that either.

  I use the latest update of Photoshop CC Windows 8.1.

  

  No, this cannot be done unless you manually insert spacing. The text ends only the path from the inside, and the path cannot be a complex path with a hole in the middle where the car is.

• Creation of a framework around a text box?

  I'm new to Illustrator (I am under CS4 on Mac) and I created what is essentially an organizational chart. (It's actually something more of a decision tree, but it's not important).

  I searched other forums and found out the Options of Type box. I use to create 6 pixels of spacing to insert between my text and outside the text box. Now, I would like to have a 1 or 2 point route framework automatically around the text box. One place was told to go to object > text block. However, when I select the text box and go to the object is not the block of text (either available or grayed out) option.

  It does not seem that I would have manually through the work of drawing a rectangle around each block of text.

  Can someone point me in the right direction to have Illustrator to do the blue box (electronics) in a real visible?

  Thank you in advance,

  Sharp Blues

  Select the text object.

  Use the appearance Palette to add a new fill or add a new line.

  Select the additional fill or stroke in the appearance of the list.

  Drag it to below the list content. Leave it on.

  Effect > ConvertToShape. Make the settings you want in the dialog box.

  JET

• Borders dotted around some objects, when you click

  It's the only issue I have with Firefox-on some pages (pages of Mozilla, the new tab, Facebook page, etc.), when I click on a link, there will be one incredibly ugly border dotted around the object. I tried to reboot in safe mode, and it happens on all versions of Firefox (regular, beta and Aurora). I did not have this problem with all other browsers, it's just Firefox and I can't understand why. assumptions?

  It is an accessibility feature to display a ring around an object.

  • http://KB.mozillazine.org/browser.display.focus_ring_width
  • http://KB.mozillazine.org/Accessibility_features_of_Firefox

• my iphone is locked more 6 s - I know that my password - it works come not square around the numbers and nothing happens

  my iphone 6s more is locked - I can't get into my phone - I don't know not my password - I tried - it puts a square around the numbers of password - it say I need my fingerprints to do - I have try - it does not work - what should I do to get into my iphone 6?

  This means that you are likely to not put in the correct access code.  If you never restart the device, you will need to put in the code for the first time, then later, you can use your fingerprint again.

  If you remember the password, you can then follow these instructions.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• My Windows 7 desktop icons will be a small box around them, the box is white and has perforated lines. Not a big deal, all simply boring.

  My Windows 7 desktop icons will be a small box around them, the box is white and has perforated lines.  Not a big deal, all simply boring.  It is usually around the last icon I used.  But sometimes randomly will appear around, most frequently the trash.

  Have you tried to go to customize and change your theme?  Maybe redefine things will help the issue.  You can also try re - install (or looking for a newer version of) your graphics card driver.  You can normally find this by going to the manufacturer of your computer site, click Help, and then by entering your model number.

  A few guesses.  Weird problem!

• Boring square around the pointer of the mouse in Windows 8

  Original title: boring square

  Our kitten sitting on the keyboard and now there is a square around the pointer of the mouse that I can not understand how to make it go away.  Windows 8.

  Hi Lesandru,

  What is the brand and model of the computer?

  It seems that the mouse settings should be changed, follow the steps below and check if this solves.

  (a) press the Windows key + X, select Control Panel.

  (b) Select mouse

  (c) in the Windows mouse properties, select the pointers tab.

  (d) select the Normal pointer.

  (e) click OK and apply.

  Let us know if you still face the question.

  See also section below.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Feel free to answer that if the problem persists, we're here to help.

• Grey outline around the objects when exporting to Photoshop

  Hello

  I have a strange issue when exporting with a simple badge that I'm working on Illustrator to Photoshop.

  Everything seems well within the Illustrator, but when I select my creation and copy and paste into Photoshop, then as a "dynamic object" or "pixels", I get a strange gray outline around the objects that should be hidden.

  I use the latest versions of Illustrator and Photoshop 2015 CC and their installation on Mac OSX El Capitan v. 10.11.3

  Edit: I noticed that the compression of the screenshots, it is difficult to see, but it should be very obvious if you download AI and try it yourself.

  I link to the file: http://bit.ly/1QhIi6i

  Best regards

  Rasmus

  

  

  

  

  I think that the problem is more on the side of Photoshop.

  Rasterize the objects in Illustrator; no visible lines.

  Pixelation in Photoshop; the Ant-aliasing artifacts.

  It is easy to reproduce: put a couple of black oval overlaid. Use Pathfinder > divide

  Now you have perfectly fitting distinct forms.

  Copy and paste into Photoshop; lines.

  Rasterize them (or use the pixelation effect) in Illustrator, copy and paste it into Photoshop. no lines.

• Wrapping text around an object group

  I use CS 6 and when I have an image without text to top group and try to wrap the text around the object group my text disappears. I am referring to the text which is superimposed on the picture, not the text that I drove around the object. I don't have this problem in earlier versions of InDesign. What I am doing wrong?

  Select the block of text, right-click, choose Activate and text frame options ignore skin.

• A text will not wrap around the object. Some does. Anyone?

  I worked in InDesgin (currently the CS6 for Mac) for many years. I'm not an expert, but fairly well-versed and comfortable with the program. I think I know almost everything about the wrapping of text and its options and how it works. But it drives me crazy.

  I have an imported MSWord part of the text. I have an item I want to insert in the text. Normal procedure. Easy. But this text will NOT wrap around the object. What about other texts? Yes. Other text in the document wrap around that object even very well.

  I rebooted the computer and the program. Check the settings as much as I can think and even spruced up the document from scratch as a MS Word document. Yet, no film.

  This happened to someone? What is going on? Help.

  Check the options of text block for the text that will not wrap. Ignore text dresses it is checked?

• What is the range of colors "BOLD" around a text box?

  Hi all

  Sorry for the question simple but what it means when you get a thick line around an area of text like that?

  

  Thank you

  Ben

  Hello

  The line "BOLD" of color around the text box appears as a "shot". Take a look at the screenshots below:

  

  I hope this helps.

  Concerning

• A * long * oribiting text 3D around an object?

  There are many tutorials where we can see how to make a text in orbit around another object. Here is an example of the text around the sphere. My question is - how do exactly the same, but with the text longer that could fit on the circle around the object?

  For an example, let's say we have the text: "Marry Christmas and a happy new year!" (or a much longer message). Because all the text cannot fit on the circle, only a shortest substring can take place on the circle at some point in time:

  Marry Christmas and a ha

  arry Christmas and a pad

  carry Christmas and a happ

  Ry Christmas and a happy

  etc.

  Here, of course, would be a discontinuity in the text on the circle (ongoing) - but he could hide behind the object.

  I could imagine making a way in the form of Ribbon long enough to contain the entire text and the party abandoned the Ribbon hidden behind the object, then it would look like the desired - but I wonder If there is a way to scroll long text on the path closed circular .

  Create a new model, the height of your string of text with the same width as your main computer.

  Add your long text string and dont worry this case may extend beyond the limits of the model. Animate the position of a text layer so that it crosses the screen.

  In a new publication import model of the text and apply CC cylinder twice. Put the layer you want to obscure the text between the two instances of CC cylinder and set one to render inside and the other to return to the outside.

  Quite. EZ as pie.

• I've lost the ability to free scaling of objects/boxes etc in Illustrator CS5. I have to use the

  I've lost the ability to free scaling of objects/boxes etc in Illustrator CS5. I have to use the scale tool, whenever I need to adjust the size of something and it is not a sustainable technique in terms of function/productivity/time. Can anyone help me to restore?

  Display > display the bounding box.

  You may have inadvertently hit the shortcut combo to turn it off.

• How to wrap an existing text box around an object?

  I installed the columns plugin for Photoshop CC 2014 and it does what I want it to do, however, every time I "columnise" my existing text box, which is wrapped up another image using paths to work (it comes to the video I looked to create the package), the plugin removes the work path connected as if it were a new fresh text box , I created, remove the packaging.

  I was wondering if there was a way to wrap text around an image/object, preferably after I put it in columns existing .

  Thank you.

  Ok. I installed the extension (I love the way that the extensions install using the Application Desktop Manager now) and it works well, but as you say, it does not account for the retention of the text shape/path and makes a new text box.  This text box is not based on a path, so you cannot modify it.  So low line here is Uber columns won't do what you want.  You could always email Anton ([email protected]) to get a definitive answer.

  But it's frankly hard to manually change your shape.  Well actually it's a little bit tedious, but not rocket science.

  1. Make your shape.  An easy way to do it would be to make as a selection, and then click Make route selection work icon at the bottom of the Trace Panel.  Drag the resulting path on the icon new way to save it.
  2. Now drag two guides to mark the gap between columns.
  3. Zoom way to the top of your path where guides cross it.
  4. Select your pen tool and place the cursor on the intersection of the road and one of the guides.  You will see a little + when you do this, add a point.
  5. Do the same thing to the other guide intersect, then add a third point between them.
  6. Press the delete key.  You now have a gap in the path.
  7. Down to the bottom of the track work and repeat.
  8. With the selected pen tool hover over one of the end point, and then click.  (You should see a little icon of string that indicates you are at the right place.)  I don't see that for some reason, but it still works.
  9. Now, hover over the end point above or below.  When you see the tiny icon (), close the path.
  10. Repeat for the other side.

  Not quite there yet.  You make the way to work in a form.

  • Go layer > new fill layer > solid color chose to any color. You disable this layer when finished.
  • Select the text tool and place the cursor within the form.  The pointer changes to a vertical bar with dotted circle. Click and paste the text.
  • You can store the text in Notepad or in a text box.  It does not matter.
  • It will not automatically be extended to the next column.  You will need to do it manually.

  Ahh... Just remembered.  When you close the original form in two distinct forms, the corners will likely swell.  Hold the Ctrl key to select the point angle, then Alt to drag the handle down, the low point.

  So there you have it.  Or just use InDesign, or even [spit] MS Publisher.

• IE box around flash object

  Hey...
  
  I was wondering if anyone has a way to bypass the new update by microsoft which puts this box to focus around a flash on the page object.
  
  Thank you
  Eyal.

  Thank you! I actually cae top 5 minutes before your post...

  Eyal.