SRA options for small laboratory tests?

Similar Questions

• No connection option of right for the Windows test application

  I built a test application for Windows 8.1 and everything works but there is no option for connection within the app to qualify.  I activated the rights in the application builder, he has made to my server to existing law, but I can't find the connection option in the application itself.  Free folios are appearing, but no paid folios aren't.

  Can someone point me to what obvious step I have to Miss?

  Drag on the location of the application and tap on what seems to be the Sign In System. It's actually the Sign In option for the application. Let us know if it does not work.

• When I click with the right button of the mouse on videos from facebook it shows no options for me to copy the link and etc.

  When I click with the right button of the mouse on videos from facebook it shows no options for me to copy the link and etc. It only shows the parameters for the flash player. How can I fix?

  You can find the URL of the thumbnail by following these steps:
  In the context menu, choose {inspect element}.
  Now, you can see the URL in the source down (perhaps you click the small arrow to the left of the line of seledted firstly to show).

• When I start Firefox, I always "Welcome to Firefos" tab. I tried to change the options for mu, but when I close Firefox, the options return to the origional options before them, I changed. How to fix the problems of St?

  When I start Firefox, I always "Welcome to Firefos" tab. I tried to change the options for mu, but when I close Firefox, the options return to the origional options before them, I changed.

  Looks like your current profile does not work correctly.

  Create a new profile as a test to see if your profile is the source of the problems.
  See basic troubleshooting: make a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• How to enable the continuation of the Standby Option for a USB mouse: I do not see the "allow this device to wake the system from standby mode' check box__

  I use Windows XP Home Edition and I am fully up to date with the latest version of the software.

  I would like to activate my mouse USB power out "sleep mode" on my computer.  I found the help topic that describes how to do this: http://support.microsoft.com/kb/280108 how to enable the continuation of the Standby Option for a USB mouse

  However, when I follow these steps, I don't see the 'allow this device to wake the system from standby mode ' check box on any of the windows as described in the documentation for Ms.
  I use a Microsoft Comfort Optical Mouse 3000 (IntelliPoint) USB

  Any help would be greatly appreciated!

  This gives a test:

  1. click on START
  2. click on 'run '.
  3 type "notepad" (without the quotes) and press enter
  4. copy and paste this into Notepad:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usb]
  "USBBIOSHACKS" = DWORD: 00000000
  "USBBIOSx" = DWORD: 00000000

  5. click on file > save as
  6. change the dropdown to "all files".
  7 type usb.reg as the file name and save the file somewhere easy to access
  8 go find the file and double click it. Confirm that you want to add it to the registry
  9 restart the computer and see if you can wake the system from standby mode

  For reference, take a look at this:
  http://www.dslreports.com/Forum/r19635912-missing-power-management-tab

  Let us know,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot modify read only options for all my files

  Original title: properties of the file.

  All of my files have become "read only".  Even if I'm an admin I can't change that.  If I open the properties and uncheck the read-only box, it emerges, I click on apply and OK, but the file remains read-only.

  Hi David,

  Thanks for posting your query in Microsoft Community.

  From your description, it seems that you can not change the only option of reading to all your files in the computer.

  I'll be happy to help you. This problem can be caused if the files are corrupt and comes into conflict with other programs.

  I would be grateful if you could answer the following questions:

  1 have you ever done any recent hardware or software on your computer changes?

  2. have you created the file read-only?

  I suggest to follow the steps below and we update on the State of the question.

  To view or to remove the read-only or the attributes of system files in Windows Vista

  a. click Start, click run, type cmd, and press enter.

  b. to display the syntax for the Attrib command, type attrib /? at the command prompt.

  To remove the read-only attribute and to set the system attribute, use the following command:

  attrib - r + s drive:------------

  For example, to remove the read-only attribute and set the attribute to system for the C:\Test folder, use the following command:

  attrib - r + s c:\test

  Be aware that some programs may not operate correctly with folders for which the read-only attribute and the system attribute are granted. Therefore, use the following command to remove these attributes:

  attrib - r s by car:------------

  For example, to remove both the read-only and the attributes to system for the C:\Test folder, use the following command:

  attrib - r-s c:\test

  If the run command is not listed in the Start menu, follow these steps:

  Click Start, click principally made programs, Accessories, and then click run.

  For reference:

  You cannot view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/326549

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• not enough options for the SSD drives?

  I intend to buy a desktop XPS 8700 special edition. I am disappointed that it doesn't give options for this model - for hard drives, only "2 TB 7200 RPM SATA Hard Drive 6.0 Gb/s + 256 GB SSD"-which is obviously a good combination, but for me, I think that a smaller SSD drive would be nice. "" Otherwise, I like the rest of the system. A friend who built his own PC says it has installed an SSD of 128 G and it is sufficiently large with Win8, MS Office, Photoshop and other large programs installed.

  So it of just a comment, is not a problem, but I hope that Dell would offer more options, including a drive to 3 or 4. A Dell technician suggested going to road work stations - but when I looked there, I was a little confused on the readers - workstations all seem to have several readers, probably for Raid configurations, which is something over my head and on my needs.

  Or is it a good idea to have a lot of free space on the SSD drive?

  Hi Hellogoodby,

  Thanks for your comments. It isn't that much of a difference in cost between the 128 GB and 256 GB SSD. Dell is probably buying in bulk from the right and customer demand now, most people want 256 GB or more. You are absolutely right that 128 GB is plenty for the OS and applications. I have a 250 GB Samsung Evo and have used less than 50 GB for the operating system, office and all my other apps.

• VIRUS - black screen, no option for "start task manager" cant open anything

  Hey guys I've been on some * site and got a nasty virus. Here is a description of the virus:-black screen, can't see anything other than a small icon of a box of standard application, when I start in safe mode I get the words "safe mode" in the four corners as normal, but still nothing but black screen. -When I press ctrl + alt + delete it goes to the normal screen, but there is no option for "start Task Manager" it's all the other options. (happens also in mode without fail. - If I push the main Windows Start menu appears for a brief but disappears quickly, I can't click on what whether you or I see nothing other than this black screen with this small peak of an application.) I can't access the registry or run programs. What should I do? I tried to launch the win 7 pro install disc, but when I click on 'repair your computer', he says that this disc does not match your version of OS. I am running Win 7 pro 64 GB on a custom build computer any help would be thank you very much!

  Hello

  Thank you for writing to Microsoft Communities.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I suggest you try the steps from the following link:

  How to remove a computer virus?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7
  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

  For the problem with the drive is not operating system, you may need to install Windows 7 Service pack 1. Uninstall the service pack so that you will be able to get the drive recognized.

  How to uninstall Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-in/Windows7/uninstall-SP1

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• No option for a single picture of license

  Hello

  I am a CC subscriber, but have no interest in subscribing to the Stock (I rarely need to license photos).

  I'm trying to license image # 96755856, but when I click to the license, I get only 2 subscription options - no option for a single image license for $9.99.

  I tried searching the forums and Google for a similar problem, but found nothing. Is this a known issue? I'm doing something wrong?

  Thank you!

  Hello

  We now offer a small monthly plan instead of simple images.  It is a plan from month to month, so there is no annual commitment.

  Kind regards

  Bev

• Where is the option for duplex printing to my HP (with duplex unit) Mac OS 10.6.7 2025dn?

  I have a HP 2025dn (the model with the duplex unit installed).  I've updated for Mac OS 10.6.7, but I can't find the option for printing using the double-sided and double-sided printing unit.  In earlier versions of Mac OS X, it's under "Transfer paper" or "Paper source" in the dialog box "print."  Where is he now?

  In Mac OS 10.6.7, recto verso/double-sided printing option is in the following dialog box:

  1. Select file, and then 'Print' (or +)

  )

  2. expand the Menu print (when the "Print" dialog box opens, select the small black arrow next to the drop-down list "Printer")

  3. the drop 4th in the high says "Preview".  In this drop-down menu, select "Layout," the next option down.

  4. we'll find this menu drop down, different options will be displayed.  "Duplex" is the third option.

  5. in the 'Two-sided' drop-down, select one of the two options.  "Long-edged" link will be printed as a book, which means that the front and back will have their vertices on the same side of the page.

  When you're ready to print, select "Print", and your job will be printed on both sides.

• For a recent funeral where the mourners were mourners came from far and from all directions, I wanted to tag a photo of a card to send an email to allow them to find the crematorium (GPS was not an option for most!). This has resulted in

  For a recent funeral where the mourners were mourners came from far and from all directions, I wanted to tag a photo of a card to send an email to allow them to find the crematorium (GPS was not an option for most!). This has led many dotted lines of drawing and my usual 'technical fudge' draw a regular straight line then DAB the brush with the approximate background color at a regular interval would not be easy with the number of lines to draw. I look in vain for an option for me to do and was about to return to my "fudge" when I found the features of Style / dotted. Asked me if I wanted to replace the current Styles with those of dotted styles. Thas here no explanation of what he meant-Nevertheless, I selected Yes. My first line 'test' was off the card and several pixels wide I would have used - it was released as a sort of cross between an old 1960s DP Punch tape and an offset miniature piano keyboard. Clear and straight to the Styles/Reset Styles, I chose to replace the default style, thinking to be the inverse of the previous question. No luck - two months later, I can't yet draw a regular straight line. Outside re - install, how to return to where I was? I use Photoshop CS4 11.0 er

  Ianjalex

  On the tool Options bar, right click (Cmd + click on Mac, if I recall) button (far left) of the tool presets > reset all tools.

  You'd probably want to chart a path to achieve what you want (with dotted lines). Google or Bing "shot on way photoshop cs4" for more details.

• I've recently updated to Pro XI and there is no options for bookmarks.  How do Pro XI bookmarks?

  I've recently updated to Pro XI and there is no options for bookmarks.  How do Pro XI bookmarks?

  You don't really have to drive if you have Acrobat, unless you create PDF forms and you want to test the it.

• Preparation for VCP5-DV test lab

  Hi all. I took the course "VMware vSphere: install, configure, manage ' back in May and I want to prepare for the exam by creating a test lab." We do not really have ESXi installation from scratch and I understand that the free version has limited functionality.

  I have 3 HP DL380 G5 servers with storage bound locally, that I could use in any laboratory test. I can probably get a loan from a layer 3 switch.

  I'm looking to get advice get it all and in executing, install ESXi, create the cluster, configure the network (VLAN), HA, vMotion test etc.

  Where to start?

  Kind regards

  Phil.

  VMware.com eval and binaries for ESXi and vCenter

  If you have access to Windows 2008 R2 installation you can use it to AD, DNS, NTP, NFS and iSCSI for 30 days and to have access to the shared storage

  Then use the CIM laboratory book to build a similar environment to play with and spend in the laboratories.  Search online blog posts that go through the VCP5 action plan and test all components.

  A switch from BestBuy $25 is all you need really - to test VLAN / PVLAN just ensure that virtual machines are on the same host.

• Options for saving data in SmartView 11 1 2 2 300

  Hello
  I understand the Options given in the Smart View 11 1 2 2 are not global and need to define for each sheet.
  my professional users alternate between ad-hoc analysis and forms in the same worksheet.
  The data options create more work as it changes between tabs.
  For example, assume that my user is in tab 1 using the web form of planning and it has disabled the option missing, then he goes to tab2 and did the scan ad-hoc where this option is disabled.
  When he returns to the 1 tab options which he chose disappeared. It is necessary to disable them again.
  
  Is there anyway I can save this data to the server level options.
  
  Thank you
  Praveen.

  Funny, considering the global options has been a point of huge pain to pass the Add-in to Smart View. People hated being global options. The Options are leaf level now, which means that they are kept on the sheet so if you delete missing on a single sheet and go to the other you can disable that and suppress, lack of will of the stat on the first sheet.

  If you want to create the default formatting for any new journal that is created, go to options and set the options for what you want to start until the new leaves. So instead of simply hitting OK, drop down the small arrow next to the OK button and select Save as default. Now, newly created sheet will start with the options you have selected.

• How to take the laboratory test, possible?

  I'm not able to study for vmware.

  I did the course, but the company has not set environment for me and work.

  How to take the laboratory test, possible?

  I need a help from you.

  Thank you

  ________________________________

  Thiago Rodrigues | Network management

  Associate. [email protected]

  Mobile: (011) 6122-0994

  www.DIGISYSTEM.com.br

  Engine certified Manager

  Certified Itil v2 Foundation

  ________________________________

  My VCP410 exam, it is not easy to take the exam without laboratory. Try to get a lab by installing a copy of assessment on VMware Play or work station. I hope this helps.

  Tim

  VCP on vSphere 4