SRM and the volume of replication
Hi guys,.
I have a client who seeks to implement the SRM.
Available to the virtual machines are as follows:
system on vmfs1 VMDK
VMDK vmfs2-data
Windows swap file on vmfs3
VM vswap files vmfs3
VMFS 1 & 2 are replicated but not 3. They tried to reduce the amount of unwanted changes block replicant.
Have I reason to say that they would have to replicate vmfs3 (even just once) to allow sucessfully SRM protect virtual machines?
Has anyone else came across such a configuration?
Thank you
Dougie
You don't need to reproduce your vmfs3 volume.
Just follow the procedure "avoiding replication of paging files and other transient data" of the SRM administration guide.
Machine configuration virtual swap sit on no replicated data store is pretty easy, but the swap file configuration is not that simple and requires several steps to be completed for each virtual machine, including cloning VMDK, the VM configuration, operating system setup and configuration of SRM.
Tags: VMware
Similar Questions
-
Keypad does not and the volume keys not working not
I had this problem since I got this laptop, the pad and the volume keys don't work.
I tried to uncheck keys mouse in Control Panel, but they still do not work, I put on a frame, so it makes a noise whenever you click on capslock and numeric keypad. However when I press numlock that noise does not turn on, I just wanted to make sure that there is a way out maybe solve this before I take it to the store.
Looks like a defective keyboard that should have been replaced under warranty. It won't be cheap to replace. You will need a technician because it involves a lot of disassemble very delicate pieces. Make sure that the technician replaces with the correct part. There are a lot of almost the same thing available.
-
Pool and the Volume of data latency does not match the SanHQ
Using some PS6000 (Sata and SAS) as a back-end for ESXi and looking at the graph view on SanHQ and the raw data on export, but I'm not able to give a sense of latency information.
Generally for fields, the data in the column pool or member matches very closely to the sum of the parts of the volume (for IOPS / s, flow, read, write, etc.)
However, latency is not, nor is he anywhere near average either.
In the graphical display we noticed high (20-40 ms) latency playback of our pools and members, but the volumes that make up these pools are all less than 10ms. During a storage vmotion, we will see a huge spike in IOPS / s and latency and sizes KB will drop to almost nothing during the copy rebound back at high levels as the traffic goes down.
Makes a lot of sense to me (except perhaps if seq I/O is reduced to deal with latency)
To monitor latency, it seems that I need to watch the largest volume of latency of a given pool, but not the pool itself or asymmetric information.
I would get a few reports of MS Log Parser against export CSVs, but I need to make sense of this first. Latency is a KPI is no not a lot of sense.
When you see the IOPS rise and the latency goes down, it's actually a normal thing. It is called Nagle algorithm. It makes pretty much the TCP packets wait until they are full before sending them. Here is a document that can be useful, what explains the algorithm more in detail.
http://SearchNetworking.TechTarget.com/definition/Nagles-algorithm
Until reporting problem you're talking about I would recommend making sure that the last FW is installed on all members of the Group and ensure well the last version of SAN HQ are also installed. Just curious you have configured replication? I can't wait to hear back on your part.
-
Satellite A500 - on the screen and the volume of media keys control the normal behavior
Hello
On my laptop Satellite A500, I have no screen 'volume bar' when I use the media keys of volume (located between the speakers). I find this odd, like many other phones that I use (including the Toshiba) have this feature. In addition, the volume bar between the - and + media symbols of the keys never lights upward.
Could someone please confirm that those are normal behaviour? (Note that my Fn keys, utility eco work and so on).Records,
ARAMYS
Aramys salvation,
I don't know if this is normal (showing no volume bar on screen)
but as I read your message just the funktion is ok...Maybe you need to reinstall + keys +.
Maybe some pictures are corrupted and therefore not included... -
Satellite Pro A10 - no sound and the volume is enough
Hello
Recently, the sound quality of my satellite Pro A10 began to get grainy and this which resembled your comments, but the volume was not high and not so long ago
order completaly.Ive reinstalled the sound drivers and it worked
perfect for about half a day and was silent again.
I tried to use headphones and still no sound.help would be very nice.
PS. Please excuse the wrong spelling: P
Hey Buddy,
Following suggestions:
1. recovery of your machine COMPLETELY and check if it work s
2. in the case of no success, try a BIOS update and check again
3. If the previous steps didn t have worked, visit the following site and contact a service partner authorized in your country for material balance / repair:http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Welcome them
-
touchpad not working not properly and the volume control is not displayed
I have a HP Pavilion g6, and just recently, I noticed my 2 finger scroll stopped working. In order to use it, I have to go and open the "Synaptics Touchpad" whenever I start. Once I open and close my scroll is working again. Is it possible to keep on? Also, when I adjust the volume, no display on the middle of the screen there is more to show how high or low I'm adjusting! These things just stopped working it a month ago and I have no idea why!
Hello
About the touchpad, start by downloading the latest installer Synaptics driver on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59727.exe
Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.
When this has completed, restart the laptop.
When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation. When this has completed, restart the computer again.
When windows has reloaded, you may now need to configure the options require you for the touchpad - open windows control panel, open the mouse, select the tab settings of the ClickPad, then click the button settings ClickPad.
With regard to the on-screen display, download and reinstall the following.
Kind regards
DP - K
-
__add network and the volume of the notification bar
I have to add and enable back to my notification bar network and volume icons. Clock and power are already verified and working. The check box for the Volume and the network are grayed out and allowing them to cannot be carried out without some changes in the bar of tasks. The bar of tasks and properties of the Start Menu open and has the Hide icon checked. Please
answer with easy to follow instructions.
Missing icons have worked before, but while trying to clean up the Start Menu, those who are now activated.
Thank youTerry
Missing in Vista notification area icons
http://www.Winhelponline.com/blog/notification-area-icons-missing-in-Vista/ I hope I could help -
I was in every sense, within the taskbar and Start Menu properties and everything but for some reason it varies between afford all four and then not. I locked the taskbar, unlocked it, tried not by selecting all the others who are there and much more. Do anyone know how I can get them right here, they were there before, when I got the laptop, but a few months ago he started to play up. Best description is that one cannot be activated on, sometimes two at a time, sometimes I can only get the clock in the taskbar. It becomes a little irritating as when working on a laptop that is not plugged in you cannot tell how much battery you have left, or you can not see your volume control and must go through the menu and the accessories and the rigmarole when you do something important gets on my last nerve cords. Please help :(
http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html
Read all the info on the link above.
See you soon. Mick Murphy - Microsoft partner
-
unification of withdrawal and the volume of noise from multiple files
Hello
Say that I have recorded 5 conferences for a speaker in the same room but different days and now I want to combine 5 conferences into one large audio file.
- do you recommend I noise removal for each conference separately then I sting in one big file, or I join them all in one big file, and noise removal on the large file that result?
- According to my relevant place to the speaker registration for the day 1 for example was stronger than day 2 so when I join the 5 conferences that do to unify the "volume"and make sure that it appears as if it were a long conference with consistency in the voice.
Note: it is the same speaker in this same room days 5
My apologies for the long questions and I thank you all in advance for your kind help
If you have moved against the speaker, then probably noise is not quite the same thing. So, I would take a sample of distinct noise for each lesson and do them individually. When you have done that, it should be a simple matter to standardize each file for the same peak level (by example, - 1 dB) and then the content of each will be substantially the same, although the conditions of a room can make a small difference to this. Not so many things that it must be a problem however.
After that, you can attach files, using open > add and save the result.
-
Sound does not work on the computer and the volume icon does not appear in the system tray.
Original title: my sound icon has disappeared from the taskbar. The Control Panel indicates the sound is on, but I can't hear anything. What happened and how do I get my sound back?
Have a Toshiba laptop that always displays the lower icon audio in the right hand of the screen. The sound icon has disappeared and I can't hear anything. I check Contol Panel and sound, and he says it works and is turned up... but I can't hear a thing. How can we retrieve icon of audio and how I can hear sound?
Hello
Thank you for your response.I did a "System Restore" and the icon reappeared, and the sound now works.I restarted the computer a couple of times, but that does not solve the problem. Also, I went into the Panel and checked to see if the speakers were working and were lit, and they were.It wasn't until I did the restore of the system that the icon reappeared and the noise began to work again.Thank you. -
SRM using the issue of replication VRMS vSphere
Hi guys,.
Basically normally when using vsphere replication, if you lose the VRM, then you cannot recover your virtual machines.
'With the VRMS device in offline mode, it is not possible to recover virtual machines with vSphere replication. There are some items of third person out there that suggest that it is possible to manually change the files to the target location that make up the replica and recover a virtual machine. "While this is possible, I do not recommend relying on this method of recovery, because it's a very manual process and, above all, not supported by VMware "
vSphere replication device failure and recovery prevention | VMware vSphere Blog - VMware Blogs
Am I right in thinking that when you use SRM with replication of vsphere, this isn't a problem that you can 'force' recovery with MRS... .where is it always going to be a problem?
This is a question published iI in
Cheers for the help guys!
As Martin mentioned in the other thread, VR (and SRM when using VR) require work VRMS at the location of the target/recovery. To clarify your statement, read: "when using vsphere replication, if you lose the VRMS on the site of your target/recovery , then you cannot recover your virtual machines.
With MRS is still a problem, but normally if your production site is affected it will not be an impact on VRM on the recovering site you will always be able to recover. Enforcement is where any operation is attempted on a protected site, so it's really for a different use case.
Does that answer your question?
-
SRM - excluding the OS data replication store
Hi people,
I had a requirement as one of the application to exclude OS data replication store after the initial replication of secondary site.
So first I want to know is it possible to exclude replication to secondary site data store BONES as VMware SRM (by SRA) control replication?
If it is possible is recommended to exclude the data replication OS store?
NOTE:
Operating system data store will be later replication when some manual changes committed in the ms (as the update, changes in demand, etc.)
Thanks in advance...
--
Kind regards
Hari.
Hello
I had a requirement as one of the application to exclude OS data replication store after the initial replication of secondary site.
Are there other virtual machines on this data store that should be protected?
So first I want to know is it possible to exclude replication to secondary site data store BONES as VMware SRM (by SRA) control replication?
You must stop / cancel the configuration of the replication of the LUN manually on the storage array. SRM cannot 'see' that the LUNS are replicated and stop replication when you do a failover.
What you can do to protect that VM is to start the Wizard "To configure Protection" and on the storage options screen select the VMDK not replicated and mark it as detached. This will allow you to complete the wizard despite the disc not replicated VM. But consider only failover / recovery test, you will need to present the data store to the hosts and fix the OS VMDK on this virtual machine manually.
If it is possible is recommended to exclude the data replication OS store?
Of course, it cannot be a common recommendation. What about application settings / settings OS / event logs / other things? You want to replicate the data manually store whenever something is changed in the OS?
What is the specific reason to not replicate the BONES?
Michael.
-
SRM and the recovery of the VM
Hello
Is it possible for a recovery of the VM to SRM without disrupting other virtual machines in the Group of Protection?
Method of planned: change the stimulus plan and select do not put on for the other virtual machines in the Group (or put the other virtual machines Suspend criticism VMs during Site recovery)
Click run.
What happens to the protected virtual machines which I am not interested to recover? Do they get upset or operate without worrying?
You may have about the failover a single VM to a Protection Group with multiple LUNS/virtual machines without stop / affect other VMs on the Protection Group? If so, the answer is no.
-
Try turning off your computer and pressing Command + Option + P + R as soon as you restart your computer.
-
Satellite A200-10 x and video crashes when the volume is high aid
every time I watch a video, and the volume is above a certain level (not even maxed out) the video begins to freeze and the entire system after that... If I turn down the volume of the small wheel at the front, sometimes he gets after several minutes, but some other times, it shows just the Blue error screen and restarts immediately... I almost tried everything... had more memory (2 GB), formatted and installed win 7 32, installed all the latest drivers for this version of windows...
I'm totally frustrated with this laptop... He had problems from the beginning, I mean, they have launched it with Vista Home and 1 GB of ram which was simply too small for the system working properly... So they forced just buy you mem more because you wouldn't be able to work.
If someone knows one any solution please help me
> I have almost tried everything
Have you also tried to install original recovery image Toshiba (OS that you got with your laptop) and test it with the factory settings?
What videos you watch? A few stuff downloaded or original DVD movies?When you look at the film and the sound is low is all OK?
I have Satellite P200 and it's the same as yours, but a bit bigger notebook with 17-inch screen. I have 2 GB of RAM inside, and it works perfectly with original Vista and now Win7 32 bit.
Maybe you are looking for
-
Firefox randomly disconnects me sites
For about a month now, Firefox (18.0.2) has been randomly connect to the sites I WANT to remember me (for example sites Facebook, Amazon, with the forums that I visit every day of work). He drives me crazy and it did NOT used to do this. It seems mor
-
I can't connect my cloud i because he know maxium free accounts have been activated.
I can not connect in my I phone because he know I have reached the maximum number of free accounts.
-
To enable IIS controll password in the IIS 5.1 Document Security tab?
Why when I uncheck the IIS allow to control password and enter my password and confirm it, then I go into my Web browser is not asking for a user and pass I provided under the Security tab of Document in spite that integrated Windows authentication i
-
can I reload windows vista to another pc dominant windows xp without problems
Is it possible that if I take my Windows Vista disks can load on another PC which has XP pirate and will replace it without complications.
-
Despite the appropriate settings, the text size is too small...
Please note: I don't need to be told to: - go into settings and increase the size of text - use drive Mode Here is the standard answers given here Support for Mozilla, and they are not relevant in many cases. As have been pointed out by many other Fi