SRM RDM - unable connect NFC services

Similar Questions

• Set unable connect desktop service

  Hi Experts,

  I'm new in vworkspace and here's my environment:

  Server A:

  2012 R2 64 bit Windows Datacenter Edition

  vWorkspace 8.0 MR1 (for demonstration)

  ServerB:

  Windows 2012 R2 64-bit Edition DC

  Hyper-V

  I get the error while connecting to AD app portal. I don't know if they are related, not appear,

  There is another error and I have already post to this forum http://en.community.dell.com/techcenter/virtualization/vworkspace/f/4827/t/19586509.aspx

  I got error while logging it says "the security on the server database doesn't have a computer account for this workstation trust relationship"

  But if I use the gold model to connect through hyper-v it creates above the error.

  Here is the screenshot:

  

  I searched google and software communities but found no lead who solve my problem,.

  I tried to check the properties of the computer via the editor with features advanced-attribute AD - DC and to change the dNSHostName name to be the same as the full name and all, but doesn't seem to work.

  I also did the delegation of users and computers through the DC. but they cannot always solve my problem,

  Please help, someone at - it already had the same problem I have?

  Thank you

  Marcos

  As Mike said, you need fix your model first and then to supply some new VDIs starting from the working model.

  Once you have done this, let us know if you still get the question of confidence.

  Thank you, Andrew.

• Manually install the update on the Server 2008 R2 - FATAL: unable to connect to service (hr = 80004002)

  When you manually install Windows updates on our server, we get the following error message:

  Setup Windows Update Standalone - Setup has encountered an error 0 x 80004002 - no such interface taken in charge.

  What follows is also found in windowsupdate.log

  2016-01-26 21:26:47:489 8340 1 b 10 Misc = process: C:\Windows\system32\wusa.exe
  2016-01-26 21:26:47:489 8340 1 b 10 Misc = Module: C:\Windows\system32\wuapi.dll
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI - COMAPI: IUpdateServiceManager::AddScanPackageService -.
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI - ServiceName = Windows Update stand-alone installation
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI - ScanFileLocation = C:\97a2ae7429fcb9d0e21f1eb1a047983b\wsusscan.cab
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI FATALE: unable to connect to service (hr = 80004002)
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI WARNING: failed to connect to the service. (hr = 80004002)
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI - exit code = 0 x 80004002

  Is there a way to repair the wusa.exe?

  Sorry, evil forums. Server issues are better managed on Technet. TechNet - Microsoft forums

• State of the unknown connection, dependency service or group do not start.

  Original title: unable to connect to the internet.

  I can't connect to the internet. He said unknown state with a Red Cross of the connection and the dependency service or group does not start. My diagnostic policy Service stopped and can not turn on the firewall

  Hello

  -What security software is installed on your computer?

  I suggest you perform the methods mentioned below.

  Method 1: Security Microsoft scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Safety Scanner WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2: Enable disabled services and start the services.

  To enable the disabled services and start the services:

  a. click Start, type services.msc in the box start the search.

  b. Select Services in the programs list. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  c. right click on phone and then click Properties.

  d. under the general tab, click Manual next to startup type.

  e. under the general tab, click Start under the Service status and then click OK.

  f. Repeat steps 3 to 5 for service remote access connection manager and Remote Access Auto Connection Manager service.

  Method 3: Remove unwanted entries from EAP (Extensible Authentication Protocol) of the register.

  ESTABLISHMENT OF THE REGISTRY:

  Serious problems can occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

  a. click Start, type regedit in the box start the search.

  b. Select regedit list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  c. navigate to the location HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan\PPP\EAP

  d. identify the subkey used by your modem.

  e. remove the other subkeys other than the default (13, 25 and 26 are by default).

  Method 4: If the methods above does not help then I suggest you perform the restoration of the system to the point when the service worked very well.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Hope this information is helpful

• HP connection manager: Fatal Error, HP Connection Manager Service has stopped responding.

  Hey there,

  I have a very big problem with HP Connection Manager 4 on several Windows 7 laptops. The program is installed on about 250 laptop computers and some of them drive me crazy. Everything was fine until some point (I'm not quite sure, that could be after the installation of SP1, Win7), the connection manager has decided to stop working on some machines. Whenever I try to start it, it takes a long time to load until the following message is displayed:

  "HPConnectionManager.exe - fatal error '.

  HP Connection Manager service has stopped responding. Quit and restart the application.

  A fatal error occurred, check the HP connection manager in the event viewer for more details.

  Recovery of the factor of COM class for the component with CLSID {24DB46C8-C842-4E91-9AC4-8A9525A5551D} failed due to the following error 80080005. »

  I tried the following on one of these books:

  -Start the service manually: "Error 1067: the process terminated unexpectedly."

  -Msconfig: Removed any connection associated with Autostart Manager

  -Reinstall the HP connection manager

  -Repair HP Connection Manager

  -Reinstall .NET 3.5

  -Changed some regkeys

  -Install Microsoft Hotfix KB2519740 which is part of the system essential updates for Microsoft Windows 7 (that I can't download because there is a server error)

  More information:

  -(pour la plupart) HP Probook 6550 b

  -Windows 7 Enterprise 64-bit, SP1 (English and German MUI)

  -HP 4.1.22.1 Connection Manager

  The only thing that really works is to reinstall the laptop with the image with which we install all of them. HP connection manager is installed as a software later so I don't understand why a reinstall is successful.

  I'm really tired of this problem, and I have a few unhappy customers on my back, so if you have any suggestions for me, please help.

  Thanks in advance!

  You could try this on one machine that shows the issue and see if it helps:

  Relevant information:

  V4.4.10.1 Connection Manager

  Corrections in sp58930:
  -Fixes an issue where the setting of HP Connection Manager protocol PAP (Password Authentication) in the connection profile for Verizon LTE systems causes an authentication failure of network systems in some markets.
  -Fixes an issue where HP Connection Manager is not displayed in the configuration of the HP software.
  -Fixes an issue where event viewer displays an error in the HP Connection Manager once the system is restarted.
  -Fixes an issue where the HP Connection Manager displays the error message "SIM card is locked" when a PIN has been used successfully to unlock the SIM card.
  -Fixes an issue where the "Enter PUK" (Personal Unblocking Code) button does not appear in the HP connection manager when a SIM has been locked after the PIN code has been entered incorrectly.
  -Fixes an issue where the statutes of the wireless LAN and Bluetooth device not display correctly on the HP connection manager when Connection Manager is started while the wireless LAN and Bluetooth are turned on and connected.
  -Fixes an intermittent issue where network technology is incorrectly identified.
  -Fixes a problem that causes a HP connection manager to stop working and an error message is displayed.
  -Fixes an issue with the Spanish version.

  Prerequisites:
  • HP or Compaq machines only brand
  • Operating system is Windows XP or later
  • If the operating system is Windows XP, it must have installed SP3
  • Version of the .net framework 3.5 SP1 must be installed

  Improvements:
  -Supervises HP Support version 4.6.8.1

  Installation package:

  sp58930 Connection Manager V4.4.10.1

  =====================================================================================

  Hope that helps...

• Receive an error message that the HP Connection Manager service not installed

  Original title: Application of program compatibility... I get a box that says. Service not installed HP connection manager... so it says incompatible... How can I fix it?

  This box appears whenever I start my computer...

  Hello

  1. what version of Windows you are using (Windows XP, Vista, 7)?

  2 did you change on your computer before the show?

  Follow the steps mentioned below:

  Method 1:

  Step 1: Run in SafeMode networking

  Safe mode, start Windows in a limited State, where only the essential is started. If a problem does reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as causes possible

  Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: Perform the clean boot

  A clean boot helps eliminate software conflicts. The article below describes how to solve problems in Windows 7 by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual. To configure your computer to clean boot see the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  If the problem persists, follow the next method

  Method 2:

  Let us try to reinstall the HP connection manager and check with the question.

  HP Connection Manager service

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/HP-Connection-Manager-service/TD-p/891309

  It could be useful!

• Microsoft Office Access Runtime and Data Connectivity 2007 Service Pak 2 will not update

  Today, I upgraded my Vista Ultimate Edition of Windows 7 Ultimate and checking the updates it listed 10 important updates. I went back in and there was still the major update 1 "Microsoft Office Access Runtime and Data Connectivity 2007 Service Pak 2 (SP2) who refuses to update which results in an error. I tried several times with the same error that results. Any suggestions as to why?

  The update could not update with no error code, just says 'update failed." However after that restart and check the view of the update the update again must have occurred because it is no longer returns in search of updates.  Thanks for responding to my problem

• ErrorCode A97 installation: Microsoft® Office Access Runtime and Data Connectivity 2007 Service Pack 2 (SP2)

  How to avoid this update (it retains pupping upwards each time).

  Hello Marcel.Pont,

  Follow the steps below to solve the problem:

  1. Start - Control Panel - programs and features - in the left pane, click View installed updates - uninstall Microsoft Office Access Runtime and Data Connectivity 2007 Service Pack 2 (SP2) update.

  2 restart the computer.

  3. download the updated Microsoft Office Access Runtime and Data Connectivity 2007 Service Pack 2 (SP2) manually from the link below and install it:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=6F4EDEED-D83F-4C31-AE67-458AE365D420&displaylang=en

  Samantha M S

• Installation of Patch of the recovery Partition has been a success, but I am unable to download Service Pack 2 to upgrade

  Having the upgrade of questions after recovery on Windows XP Edition version 2002 service pack 1 family. Okay, I found the recovery partition patch I needed and download claims it was successful, so I then try to download the Service pack 2 and nothing happening, no error, nothing. Still not sure that it worked. Yet I am unable to download service pack 3 and my updates still do not work. So I guess that the Service Pack 2 does not load correctly. What should I do now? Help?

  The other post:

  Recovered Windows XP cannot be upgraded to SP2, think I need recovery for SP1 Patch of Partition. How can I find to download?

  Windows XP Home Version 2002 Service Pack 1 "computer" would not start. I could only get it back. This causes problems. Unable to retrieve the updates I have. Impossible to download the Service Pack 2 update the others. My automatic updates do not work. When I tried to download the SP2 it stops and gives me an error message: epplauncher.exe point of entry not found. Encode pointer was not found in the library of dynamic links Kernel32.dll.Can someone help me?

  Did you try and download directly to your computer and run it from there?

  Service pack 1 and service pack 2 Service pack 1 has joined in.

  Here are the links where you can download and install Windows XP SP.

  Service Pack 2: http://www.microsoft.com/en-us/download/details.aspx?id=28

  Service Pack 3: http://www.microsoft.com/en-us/download/details.aspx?id=24

  I hope this helps.

• 'Ability to complete NFC services' constant ANNOYANCE dialog box

  Been on L do constant pop-up windows dialog box "ability of NFC services.   pretty random... almost every time I've taken on the phone I get this popup dialog box.

  then if I press CANCEL, it will appeal

  If I press 'Edit services' I go to an another sceen is just a white space with the title 'Available to change Services' ' capacity used for nfc services is $ 115 "CANCEL (gray OK).

  I CAN'T GET RID OF THE POP-UP DIALOG BOX.

  Someone please help.

  I had this since the upgrade to L.

  

  

  Looks like it's app of Scotiabank:

  https://www.reddit.com/r/SonyXperia/comments/38jeha/capacity_for_nfc_services_full/

  So far, I've found just turn on NFC prevents from popping up. I don't like leaving on normally, but I'll keep until Nova Scotia corrected with an update. Would rather do than to have to uninstall until here.

• Error 1068: the dependency service or group failed to start and failed to start the remote access connection manager service.

  Original title: Windows could not start the service of connection manager on the local computer remote access

  amplifier

  Windows could not start the service of connection manager on the local computer remote access

  Error 1068: The dependency Service or group could start.

  Hi sunelchandraoli,

  1. when exactly you receive this error?

  2. you remember to make changes to the computer before this problem?

  Step 1:

  "Make sure that all the services of the dependence of the"Remote Access Connection Manager"" are launched in the list of services...

  a. Click Start, type services.msc in the box start the search.

  b. select Services from the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. right click on the Remote Access Connection Manager service and then click Properties.

  d. under the general tab, click Manual next to startup type.

  e. under the general tab, click Start under the service status and then click OK.

  f. also check for long-term services.

  The dependency of 'Remote access connection manager' services include:

  i. secure Socket Tunneling Protocol Service

  II. telephone

  III. Plug-and-Play

  IV. Remote Procedure Call (RPC)

  c. of DCOM Server process Launcher

  VI RPC end point mapper.

  Make sure that the above services are started in the services list. If this is not the case, start all services above and check.

  Step 2:

  You can also try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information is useful.

• Failed to start Remote Access Connection Manager Service. Get the 20 error: the system cannot find the specified device.

  This seems to have started with the last batch of updates of Windows 7 (including SP1).
  I can't connect using dial-up.  Get the message:
  Cannot load the Remote Access Connection Manager service
  Error 711: The operation could not complete because it could not start the remote access connection manager service
  in time.  Please try the operation again.

  When I try to start the Remote Access Connection Manager service manually, I get the message:
  Windows could not start the service on Local computer remote access connection manager.
  20 error: the system cannot find the specified device.

  My phone displays the modem works properly, and telephony and the Secure Socket Tunneling Protocol service started.

  I don't know what else might have changed.

  Hello Vince_867,

  Thanks for your post.  Take a look at this thread for a possible solution to your problem.

  See you soon

• Error 711; Remore access connection manager service will not start

  Error 711; Remore access connection manager service will not start

  Hello

  Thanks for posting your question in the Microsoft Community!

  When exactly do you get the error message?

  This error message appears when a required service is not started on your computer. You won't be able to connect to a network, and you might not be able to install network cards.

  This problem may occur if some or all the following services are not started:

  • Plug-and-Play
  • Remote Access Auto Connection Manager
  • Remote Access Connection Manager
  • Telephony

  You can see test link following the steps and check:

  Get help with "Error 711" message

  http://Windows.Microsoft.com/en-us/Windows7/get-help-with-Error-711-message

  Do not post the State of the question.

  You can always view in Microsoft Community if you need help with Windows.

• SRM with SAS connections

  Hello

  I'll make a proposal for a DC & DR site with vcenter Site Recovery manager. We use the IBM DS3524 (the 7.84.44.00 firmware version) storage with SAS connections to hosts. VMware said THAT MRS is only supported with ISCSI and Fibre channel. So can I do replication SRM with SAS connections. Please update me as soon as possible the guy.

  Thank you

  It's a thought, and it could possibly fly.  Another option would be to look at Zerto.

• connect to the domain - unable to connect to service windows (system event notification service) Win7

  Hi, I had some 780 Dells with Win7 Pro News. All functions are OK, but when I join my domain (W2003 SP2) after logon there is an error in the area of subventio (unable to connect to the windows service: SENSE). When I try to log on as an administrator, there is an error message, but I am connected, everything works (sharing, Internet,...) when I try as a normal user to logon failed with error... I view me a log of system events and there is an error with event ID 7031. Please can you help me?

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner