That meant disabled in the basic wireless settings?

Similar Questions

• Could someone tell me that I have a laptop that is compatible with the adapter wireless Athreos in it and it catches an unsecured, network shown as next (automatic) for the SSID (network name). Please tell me how to connect...

  Could someone tell me that I have a laptop that is compatible with the adapter wireless Athreos in it and it catches an unsecured, network shown as next (automatic) for the SSID (network name). I tried parameter as point of access, AD-hoc, Connect automatticaly etc but will not connect... Please tell me how to connect...

  Hi Sumit and thanks for posting.

  Your Athreos has never connected? If it has connected then it not only connects it to insecure networks? Also after can trying to connect you do the following?

  Start, run, CMD, OK to open a command prompt:

  Type the following command:

  IPCONFIG/ALL

  [Note that there is no space between the oblique and ALL bar].

  Right click in the command window and choose Select all, and then press ENTER.
  Paste the results in a message here.

  I hope this helps. After the back if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• WRT320N router resets the default wireless settings after a while

  I wonder if someone can help me. My router automatically assigns the initial default wireless network settings.

  Sometimes after an hour, sometimes after a week.

  It reverts to automatic instead of the manulal settings that I use for the configuration.

  Replaces the Linksys SSID and disable wireless security.

  What I am doing wrong?

  Try to reflash/upgrade of the firmware on the router and see if that helps. Follow the steps described in the section below to download and update the firmware.

  http://www6.nohold.NET/Cisco2/UKP.aspx?pid=93&login=1&VW=1&app=search&articleid=4030&userrole=Linksy...

• After the installation of 12.0, I get popups and migration from the lower left of my screen that will heal all the ads block settings.

  Whenever I visit a new Web site I can wait for one of my first 'clicks' to open a new window with something like a Quibids announcement or a site with audio asking me to take a survey vaguely regarding the site I'm. There is also an ad in the migration of the lower-left corner of my screen that no amount of effort will get rid of. It didn't happen until last week when I downloaded the latest version of Firefox. My OS is Windows 7 on a Toshiba laptop. I connect with a hotspot from Verizon at home only. I scan all emails before downloading from the server PC of the population. I ran most of Windows and a couple of free virus programs did a full scan nothing helps. This problem does not exist when I navigate with Windows Explorer.

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• Export as that doesn't remember the last used settings

  Trying to get used to the use of export as instead of the old economy for the Web. However, it doesn't seem to remember the last settings I used. Save for Web still don't this, no problem. It's quite embarrassing and I have always used save for Web for this reason. Is there a way to remember? I have changed my preferences to export but it was just for the Quick export. Any ideas?

  qmatt wrote:

  Trying to get used to the use of export as instead of the old economy for the Web.

  Do not. The new export module is not finished and it still lacks a lot of features (like the color management and the support of metadata). IMO, it was shipped prematurely.

  The code of save for Web is based on the old ImageReady and certainly need a review/rewrite, which I do not know "export as" will provide beautifully. But until it's over, using SFW.

• 2 PCs, PC2 connects via connects the PC1 wireless Internet wireless, network sees home, but will see no internet except with ethernet cable - illogical!

  1 computer (PC1) running Vista, to date, AVG free, Spybot S & D the timer running
  2 may have been infected with spyware by surfing - received message in the Explorer to search for the virus, think it was fake
  3 then lost wireless internet in the two IE & Firefox
  4 but had a Skype conference call minutes 40 OK - Bizarro
  5 lit (PC2) laptop running Windows (light version) 7 - same problem with browsers
  5A AVG on PC1 has been updated - ran a deep analysis, found 44 spywares & fixed them
  5 b also ran registry cleaner
  6 has managed to update Spybot, is all business, then working browsers, internet connection complete
  7 can now connect 1 PC to internet with ethernet connection, he can see the wireless and home networking (local access only) so I guess the wireless work, but he can not see the internet on this subject.
  8 update both Spybot and AVG on PC1 with wired ran the two found no additional infection
  It's really strange, I do not understand how to see PC2 PC1 and PC2 connected wireless to wireless home, but PC1 is unable to connect to the internet without a network cable...
  All pretty useless Windows diagnostics

  Hello

  A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

  Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

  If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  ----------------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there are utility wireless isn't running with the native Windows wireless utility provider (Service WLAN).

  ----------------

  Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP (network IP number) of work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

• I get a JavaScript Application error: "setTimeout" called on an object that does not implement the interface Window for Firefox.

  I get a pop up box with the message: Application JavaScript error: "setTimeout" called on an object that does not implement the interface Window for Firefox.

  But it seems to appear when I go to Amazon.com. Then he opens with this message and the OK option? But as fast as I can click OK, another box appears. After all a half dozen, she disappears - until what I move to another part of Amazon! I uninstalled - reinstalled and then - Firefox and BA. I do not understand this!

  (And of course, there is always the possibility that it is not only attacking me on Amazon... There may be a lot of other sites that also trigger, and I just haven't been there yet.)

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• HP Officejet Pro 8620: Unable to wireless settings

  I tried to go into my wireless settings so I can connect to a new router, but the wireless configuration wizard continues to display the error message "the service has been locked by the administrator or the person who set up the printer. I not locked it and I am the only user of the printer. The wireless configuration wizard and Wi - Fi Protected Setup are stored.

  I then tried to do a hard reset, that did not work. And try to restore network settings using the embedded server HP only deleted my old router connection without giving me more options to configure the new wireless settings. Can anyone help?

  Hey @JF08, Hello and welcome to the Forums of HP!

  From your description, it sounds like a complete reset may be necessary. I don't know how it got locked, but the easiest way is a factory reset.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Printer resets: What You Should Know by @Bob_Headrick

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  Please take a moment to read the privacy policy of HP to http://www8.hp.com/us/en/privacy/ww-privacy.html this privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online business is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

• Why the excess USB traffic created by some models of the Microsoft Wireless Optical Desktop Receiver?

  As part of my work as a volunteer for a repairman to point not lucrative to registered of Microsoft, I test a selection of mouse and wireless keyboards that are given.  Based on the production of a software tool for USB port monitor, I noticed recently that some models of the Microsoft Wireless Desktop Receiver generate constant even when the keyboard and mouse are slowed traffic USB (about 10 transactions per second) or are completely absent.  This occurs with the 2.1 receiver Microsoft Wireless Optical Desktop (model 1028) and the Microsoft Wireless Desktop receiver 3.1 (also labeled model 1028).  It does not occur with the Microsoft Wireless Optical Desktop Receiver 1. 0a, nor have I watched Microsoft controls only receivers or receivers of Logitech mouse...

  This makes me curious.  What do these receptors with all this chatter?  I assume deliberately, because I see the same thing in all the units I checked.  If I was pretty savvy to decode the trace of the USB, I might be able to figure it out by myself, but I'm not.  I hope that there is someone on this forum who remembers how these old 27 Mhz receivers are designed and who can make me jump the learning curve by giving me an explanation of a layman to what happens here.

  Hello

  Thanks for posting your question on the Microsoft Forum. I understand that you are unable to connect to your hosted network.

  I suggest you to ask your question in the TechNet forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking&filter=AllTypes&sort=lastpostdesc

  TechNet is watched by other computing professionals who would be more likely to help you.

  I hope this helps.

  Thank you.

• Windows 7 will not detect THE routers wireless, including mine.

  Windows 7 will not detect THE routers wireless, including mine. I inserted the cd of restoration of the system, and after that he picked up no internet. No, even if I connect it with the wire! Help!

  Hello

  Thank you for contacting Microsoft Community.
  Is properly installed wireless adapter driver?
  Go to start-> type devmgmt.msc-> press on enter. In the Device Manager window, expand network adapters. You should be able to see a list of network adapter as Ethernet, Bluetooth, etc. Make sure that you can find the adapter wireless from the list. If so, double-click it. Properties windows will be open. On the general tab, under device status, if it shows that the device is not functioning properly, please remove the case, locate the wireless network card and make sure the connections of antennas are coneected correctly. If even a connection is not properly connected or damaged, you cannot connect to any WiFi network.
  Response if the issue is not resolved.

• Please help with the correct color settings

  I use ID CC depending on which we, my printers want my final PDF either as PDF/x-1a (I know it does with regard to Flattening) or PDF/x-4.

  I need all color images for close to CMYK, no matter what they were when placed. I need all 100 %K black to stay like this and not to convert an intense black.

  Currently, my document color settings are:

  Parameters: general use of 2 North America

  Workspaces:

  RGB: sRGB IE61966 - 2.1

  CMYK U.S. Web Coated (SWOP) v2

  Color management policies:

  RGB: Preserve embedded profiles

  CMYK: Preserve numbers (ignore linked profiles)

  Conversion options:

  Engine: Adobe (ACE)

  Intent: Relative Colorimetry

  I use the default settings for PDF/x-1's or PDF/x-4 (most have the ink Manager to convert all tasks to deal with) and and always receive a yellow warning with the following in general warning triangle:

  The preset specifies source profiles that do not match the current color settings file. Profiles specified by the color settings file will be used.

  What should I check in my document color settings to avoid this error message (the resulting files do appear to be OK for what I need, I want to just make sure that I put it just in case this error). Of course, other thoughts are always appreciated also.

  What should my document color settings also if the final document will be black and white (in grayscale) and contains only data on the black plate?

  Sorry to contradict the Peter a bit here, but X - 4 allows to RGB, rather than to specify it, so you can have your PDF by setting 'Convert to Destination (preserve numbers)' with an appropriate destination CMYK profile and still conform to the standard X-4.

  That's what I'm doing here, because I prefer the Adobe CMM performs the conversion.

• I left several tabs that Firefox sent the warning prompt. As I click on save and leave I pressed accidentally the "save these settings. Now I'm just wondering, how do I disable it, so that Fireox sends the prompt whenever I try to close multiple tabs?

  This may sound silly, but once when I was about to leave Firefox, I got the warning prompt if I wanted to close many tabs... As I click on save and leave I pressed accidentally the "save these settings. Now I'm just wondering, how do I disable it, so that Fireox sends the prompt whenever I try to close multiple tabs? I'm under 3.6.6 with OS X Snow Leopard.

  You can reset the preferences to warn on the topic: config page via the context menu.
  browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
  browser.warnOnQuit, see http://kb.mozillazine.org/browser.warnOnQuit
  browser.warnOnRestart, see http://kb.mozillazine.org/browser.warnOnRestart

  To open the topic: config page, type Subject: config in the address bar (address) and press the Enter key, as you type the url of a Web site to open a Web site.
  If you see a warning then you can confirm that you want to access this page.

  In Firefox 3, you don't get the dialog "Save and exit" pop - up if you choose Firefox > Preferences > General > startup: "When Firefox starts": "show my windows and tabs from last time '.
  Get the dialog "Save and exit" pop - up, to select one of the other options (display my home page, display a blank page).

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to turn on the Microphone that is disable Windows thorugh settings?

  Original title: problem with the microphone

  Hello :D

  First of all, my microphone is NOT 'disabled '.  I went to settings sound and Device Manager, everything is fine, no annoying exclamations, nada!  AND the microphone IS "enabled".  It is also connected to a worksheet. :) Com ports are working, too.  No IRQ problem to report.

  The other night my husband and I were talking about how hackers can turn on microphones and video cameras.  Exceptional hubby showed me another way (outside the standard enabled) to turn off the microphone so that he - can't - be turned on by a pirate.  It's something in the settings of the Windows software and pretty much took the microphone out of my loop of material. * sighs *.

  My sweet husband is now out of town, to the secret... and I have homework due.

  Please help if you can.

  If you made it this far,

  Thx for listening; D

  TxDoLL

  Hello doll of Texas,.

  Thanks for posting your query on the Microsoft Community.

  As you have already checked in Device Manager and the sound settings, it seems that the Microphone is disabled in Windows registry.

  I would ask you to try the following changes in the registry settings to check if the Microphone is disabled reading.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  STEPS to change the registry settings:

  1. Click Start, type regedit in the Start Search and press ENTER.
  2. Draw the following registry location:
     HKEY_LOCAL_MACHINE\System\ControlSet001\Control\Cl11CE-BFC1-08002BE10318} \0005\Settings
  3. Check if the DisableMicFromPlayback value is set to 1. If this is the case, then, change it to 0 and click OK.
  4. Close the registry editor and restart your system.
  5. Check if you are able to use the Microphone.

  NOTE: Please carefully follow article to back up and restore the registry before trying the above step.

  Hope this information is useful. Please post back your results for assistance.

  Thank you.

• Toshiba Software by disabling the automatic Wireless Configuration Service

  I have a problem with a Toshiba Satellite Pro laptop. When I start the system, the automatic Wireless Configuration Service is disabled and I have to go into Services and start physically whenever I start Windows (XP 32-bit sp3).

  I think it's own software of Toshiba (Q-Connect/Summit?) it prevents start automatically with Windows, because everything else is as it should be.

  Can you advise how to fix this so that the service always starts automatically and does not, during the trip, the settings for windows? Set up a wireless ad - hoc is quite difficult because there is no more headaches.

  See you soon,.

  John

  Hey Buddy,

  It s I don't know ConfigFree turns off this feature of Windows... As far as I know it s necessary service for all WLAN configuration tools

  Is manual start automatically, or simply the value type? You must assign it automatically.

  By the way: what laptop do you have?