SRW208G DOWNLOAD startup config

Similar Questions

• PowerConnect 8024 k - Copy startup-config

  I have two PC8024ks that I need to run this code on:

  copy startup-config tftp://ip/filename

  My TFTP is started, I hit Yes to continue, and he thought for a second and then returns errors:

  Error in a configuration number xx online script

  That is to say that something is wrong with the config Im trying to download, but I just pulled a switch configured identical in the same chassis by using the configuration:

  copy the startup-config tftp://ip/filename

  No indication as to why the slightest mistake out?

  The firmware matches between the two switches? If the firmware is different revisions it maybe why it is not accepted.

• % Error opening nvram: / startup-config (Permission denied)

  I get a weird error, permission denied issuing 'show config' at the level of the user.  We use this everywhere in the environment without any problems.

  IOS: System image file is "flash0:c2900 - universalk9-mz.» Spa. 152 - 3.T.bin.

  R1 #sh run | I have aaa

  AAA new-model

  AAA authentication login default group Ganymede + local

  AAA authorization exec default group Ganymede + authenticated if

  AAA authorization commands 1 default group Ganymede + authenticated if

  AAA authorization commands 15 default group Ganymede + authenticated if

  accounting AAA commands default 15 stop only Ganymede group.

  AAA - the id of the joint session

  R1 #sh run | I have priv

  privilege exec level 1 traceroute

  Ping privileges exec level 1

  privilege level exec 1 see logging

  See the privileged exec level 1 configuration

  privilege exec 1 show privilege level

  show privileges exec level 1

  R1 #disable

  R1 > show config

  11855 262136 bytes using

  % Error opening nvram: / startup-config (Permission denied)

  You are indeed allowed to run the command (as evidenced by the fact that the command run).

  See the config is actually an alias for the command more nvram:startup - config
  

  Accordingly, the question is the permission on the file, not the control itself.

  Unfortunately, the file systems do not explicitly support permissions.  This used to be implicitly supported by permissions to see the config.

  Maybe it's a bug.  I opened a case on it if you need really need this feature.

• EEM script to check running-config startup-config changes after reloading

  I'm trying to follow a bug that causes some CLIs to disappear from the running-config after you reload the router.

  The LCIs were saved in the startup-config before reloading the router.

  Is there an EEM to compare the running-config startup-config online with after reload of the router and syslog lines that are missing from the running-config?

  You could do something simple like:

  Event Manager applet config compare

  event timer cron cron-entry "@reboot".

  command action 1.0 cli 'enable '.

  cli 2.0 action command "show archive config diff nvram:startup - config system: running-config.

  post 3.0 action to "[email protected] / * /'from'[email protected] / * /" Server "10.1.1.1" topic "Config diffs" body "$_cli_result".

• bug in iOS? startup-config + command access-list + an invalid entry detected

  I posted this yesterday in the newsgroup usenet comp.dcom.sys.cisco and received no nibbles. If I did something incredibly stupid, please do not hesitate to advise.

  Cisco 827

  IOS (TM) C820 software (C820-K9OSY6-M), Version 12.2 (8) T5, RELEASE

  SOFTWARE (fc1)

  I'm looking to use a host named in a more extended access list. The

  script I copy startup-config contains the following entries:

  ! the 2 following lines appear at the top of the script

  123.123.123.123 IP name-server 123.123.123.124

  IP domain-lookup

  ! the following line appears at the bottom of the script

  120 allow host passports - 01.mx.aol.com one ip access-list

  When I reboot the router, I saw the following message:

  Translation of "passports - 01.mx.aol.com"... the domain server (255.255.255.255)

  120 allow host passports - 01.mx.aol.com one ip access-list

  ^

  Invalid entry % detected at ' ^' marker.

  It seems as if the entrance to the server name of the router is not processed

  prior to the access list. I can not even check with

  router02 access lists 120 #sh

  makes the access list entry * not * exist.

  But when I manually type the entry in the router I see the

  Next:

  router02 (config) #access - list 120 permits Passport - 01.mx.aol.com ip host

  any

  Translation of "passports - 01.mx.aol.com"... the domain server (123.123.123.123)

  [OK]

  and I can confirm its creation:

  router02 access lists 120 #sh

  Extend the 120 IP access list

  allow the host ip 64.12.137.89 one

  I have to do something incredibly stupid. If necessary I can post the whole startup-config, although it is quite long. (I don't know if the same label/common sense if apply here as apply to newsgroups usenet. i.e. post us actual ip addresses in our configs or must they be edited?)

  Any help is very appreciated.

  Hello

  Currently IOS does not use DNS - names in the ACL for the saved configuration / running.

  When you type in a list of access with a domain name we he looks up and replaces it with the IP address. I remember seeing a bug No. recently request this feature but I don't remember one bug id # now.

  Router (config) #access - list 187 ip allow any host www.cisco.com

  Router (config) #^ Z

  router #show run | 187 Inc

  IP access-list 187 allow any host 198.133.219.25

  router #show worm | split 12

  IOS (TM) C800 Software (C800-K9NOSY6-MW), Version 12.2 (13) T, RELEASE

• New startup-config on a ASA (urgent)

  Is it possible to copy a file to the Flash of an asa and then copy this file to be the starup-config?

  I need to change a running-config on a set a little asa, and I already have the compound running-config I need, I actually copied it from this asa even before I changed the all for some purpose of DR.

  I copied the config I want to run to the asa and made a "beginning of copy flash: rcfg ' and copied the file to the startup-config, but once I did a"write mem"he will return to the startup-config to the running-config now. Anyway to make the stick of the startup-config so it will boot the in the running-config instead of the running config running?

  Do not have a wr mem, you don't need to. Once the new file is the startup configuration, it is there, just restart.

• 'copy running-config startup-config' CCNP 300-115

  Hello everyone,

  The 'copy running-config startup-config' command does not work in the certification exam. What is the problem?

  Any help is welcome!

  Thank you!

  Just use "wr mem" instead, does it work?

• Copy startup-config for pix via TFTP

  Where am I missing it? I know it's possible to copy a config pix down via Tftp using the

  WR net tftpIP: filename

  How can I do the reverse copy, the startup-config for the pix using tftp.

  Easy to do with a router or a switch. I don't see any docs on ORC that specify where to copy the startup-config.

  Hello

  Use the Net Config command

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/PIX/pix_sw/v_63/cmdref/c.htm#wp1055799

  Thank you

  Nadeem

• Problem to get the startup-config under the privilege level

  Hi guys

  I use the level of privilege 15.2 and in this version, that I can not get the startup-config under some of IOS (in this case, IE 7)

  I have no problem to get it from the earlier version, also to 15.1

  Router #sh privileges

  Current privilege level is 7

  Router #sh startup-config

  With the help of 4414 262136 bytes

  % Error opening nvram: / startup-config (Permission denied)

  Config:

  privilege exec level 7 show startup-config

  privilege level exec 15 see the configuration

  show privileges exec level 1

  When I added cmd ' privilege exec level 7 show startup-config ', IOS generated automatically new line "privilege exec 15 level show configuration.

  seems that there must be an "improvement" under versions of 15.2

  Any ideas?

  Thank you

  Pet

  Hello

  I have faced the same problem and opened a folder. Please find the answer I get from the TAC:

  ==============================================

  This is designed by design as a security measure. Starting in the new versions of IOS, the privilege level of access to system files must be configured separately. There are two options to solve this problem:

  (1) run the command at the prompt to activate it.

  (2) set the privilege level of the file system via the config command "file privilege X" with X the number of privilege level

  ==============================================

  Hope that helps.

  Best regards.

  Karim

• What is xwvorgutssd in my startup config? Anyone know?

  I searched and have no idea what it is. Trying to find out if necc to start

  Thanks for any info

  The short answer is that you must remove this entry from your configuration to start using Autoruns (see below).

  You seem to be a step beyond the majority of posters who ask something like: 'why do I get an error message that xwvorgutssd.dll can not be found when I start Windows?' because you have already discovered the entry in your startup configuration (probably using msconfig).

  Here is the generic answer:

  Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.

  When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  First of all, download, install, update and run a scan complete with each of these free analytical tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

• DOWNLOAD STARTUP REPAIR ANYWHERE

  My computer froze and had to close button, but now is only going to start in safe mode.

  I tried many things but no repairs of work.startup is not installed and I do not have the instalation disk;

  is there anywhere I can download the file.

  Hello

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a DVD from Microsoft there is a download of a file ISO of Vista Startup Repair available that you can put on a floppy Bootable to the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How to download backup config?

  our client has an ID, but no vms how we load the backup config cli or http for the recovery...

  Of course, the beauty of this is that the recovery is the reverse...

  probe # copy ftp: / /@/ current-config

  No required VMS!

  Alex Arndt

• vWorkspace 8.6.1 connector self-configuring config.xml

  We have just upgraded to the server vWorkspace v8.6.1. When we used 8.0.1, we had connectors 8.0.1 windows that would automatically get "'vworkspace.somedomain/config.xml ' and automatically configure the VDI settings clients." I've updated the client to v8.6.309.4062 and this time I'm just introduced to enter 'Web site or e-mail address' in the text box. Here, at the University, we loved this feature because it that VDI has been automatically configured and students do not have to enter the URL. Who feature has been removed from this version?

  Hello

  I believe it has been deleted, but several alternatives have been introduced.

  I know that the reg key to set the path always exists HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Provision Networks\Provision - Client\AutoConnectURL IT and still works with this version of vWorkspace.

  This is a string value that contains the path to your broker (if you use the new connector management functionality) or to your file config.xml if you use the old style.

  With the new direction of connector, the intention was to make it easier for new users. Everything they need to do is go to a (properly configured) Web site and it will install the connector for them and configure it automatically.

  If you don't want to use this option, you can either 1, use the URL of automatic connection mentioned above. 2, teach them the URL to download the config 3, create a DNS entry to use the E-mail address configuration option.

  Thank you, Andrew.

• Startup-Configuration of backup to Disk0:

  Hello together,

  I want to back up my configuration of start-CAT6500 to disk0: flashcard and that you want to save the config file with the actual timestamp in the config-file-name on disk0:

  In what follows the syntax:

  Event Manager applet backup_conf_to_CF_card

  syslog event model ' % PFINIT-SW1_SP-5-CONFIG_SYNC: Sync'ing to the standby router startup configuration. "

  command action 1.0 cli 'enable '.

  Action 2.0 cli command "conf t".

  Action 3.0 cli 'file quiet guest. "

  Action 4.0 cli command "end".

  action 5.0 cli command "" copy startup-config disk0:backup_conf?".

  action 6.0, "conf t" cli command

  Action 7.0 cli command "end".

  action 8.0 cli don't command "no quiet guest file".

  subject of the server "10.158.128.120" to "XXXX" to "XXXX" action 9.0 mail ' testlab saved on disk0 boot configuration:

  !

  Is there a date variable native, I can use? What would be the proper syntax?

  Thank you very much

  BR Patrick

  It is a little easier in TCL to control the file name. I use the following to configs copied to a server TFTP (environment variable) in a specific date format (I use other scripts to call this script on a regular and the basis of change in config):

  : cisco::eem:event_register_none maxrun 60

  If {!} [info exists BackupTFTPServer]} {}
  the value "policy cannot be performed: variable BackupTFTPServer is not defined.
  error $result $errorInfo
  }

  the timestamp value [clock format [clock second] - format {% Y.%m.%d.%H%M%S} - gmt {false}]
  Set routername [host name for information]
  Set the location tftp: / / $BackupTFTPServer / $routername. $timestamp.conf

  import namespace: cisco::eem: *.
  import namespace: cisco::lib: *.

  If {[result catch {cli_open}]
  error $result $errorInfo
  } else {}
  Table game cli1 $result
  }

  If {[result catch {cli_exec $cli1 (fd) 'enable'}]
  error $result $errorInfo
  }

  If {[catch {cli_exec $cli1 (fd) ' configure terminal '} result]}
  error $result $errorInfo
  }

  If {[result catch {cli_exec $cli1 (fd) "invites quiet file"}]
  error $result $errorInfo
  }

  If {[result catch {cli_exec $cli1 (fd) 'end'}]
  error $result $errorInfo
  }

  If {[result catch {cli_exec $cli1 (fd) 'copy running-config $location'}]
  error $result $errorInfo
  }

  If {[catch {cli_exec $cli1 (fd) ' configure terminal '} result]}
  error $result $errorInfo
  }

  If {[result catch {cli_exec $cli1 (fd) "no prompt quiet file"}]
  error $result $errorInfo
  }

  If {[result catch {cli_exec $cli1 (fd) 'end'}]
  error $result $errorInfo
  }

  If {[result catch {cli_close $cli1 (fd) $cli1 (tty_id)}]
  error $result $errorInfo
  }

• CISCO SERIES: 1700 - Config will not save in NVRAM.

  I tried 'memory to write' a config and also attempted to save it to the startup-config, but every time I turned off and turned on, it does not record the prior config. Anyone know what could be the problem?

  Dear S,

  Are you through your problem?

  Hope Thisishanky and rburts soloution that worked, if you want, you can IM/PM me on yahoo.com my id is [email protected] / * /. Cool. If you still face any problem :)

  EM