DOWNLOAD STARTUP REPAIR ANYWHERE

Similar Questions

• After repair startup repair to locked by default

  First of all thanks to all those who are willing to help me!

  HP Pavilion Elite m9400 desktop PC (M9400t)

  Who IS under warranty I should add...

  And had weeks of waiting to talk to someone about the current number of Ticket Service. (without any luck there...)

  Finally, I did a factory restore...

  After restoring to factory settings when I click on finish and the pc restarts, he went to

  «Startup Repair checks your system for problems...»
  
  If problems are found, Startup Repair will fix automatically. Your
  computer may restart several times during this process.
  
  No changes will happen to your personal files or information. This could
  take a few minutes.
  
  Attempt to repair...
  Repair the disk errors. It could take more than an hour to finish. »
  
  This works since 06:00 this morning... So, 12 1/2 hours. You can not hit Cancel or 'x '.
  It is said
  "Startup Repair".
  Repair the current operation cannot be cancelled.
  
  What should I do?
  I don't want to use the power button to turn off unless I know its ok?
  
  I'm waiting FRO a ticket service for weeks. I get the SAME answer over and over again... It's...
  
  Pasted from the email:

  Thank you again for contacting HP Total Care.
  After reviewing the question, I understand that you have not received response from the support of advanced technology.
  I appreciate that you have passed your question once again to us and gave me the opportunity to help you in this regard.
  Please accept my apologies for the difficulties that you are experiencing with your technical questions. I assure you that your situation is not indicative of the quality of service HP is able to provide. I appreciate sincerely taking the time to share your experience with us. Your comments are very important to us and will help to make improvements.
  
  (My name...), I regret to inform you that, due to a few techniques, cling to our advanced support group not able to you contact. Therefore, I'm climbing the case once again and you will certainly receive a response as soon as possible.
  
  If you have additional questions, feel free to let me know. I'll try to do my best to help you.
  
  We always try to ensure that the problems encountered by customers are always taken care with the utmost importance. Be a valued client of HP, we appreciate your prestigious association with us.
  
  For more information on keep your HP and Compaq products up and running, please visit our Web site
  to:
  http://www.HP.com/go/TotalCare
  
  Sincerely,
  
  ****
  HP Total Care
  

  I got this exact answer even FOUR DAYS in a row. GRRRRRRRRRRRRRRRRRRR
  
  In a previous e-mail, I was told...

  That's why I'm escalating this matter to our advanced support group (upper level)
  that will come back to you will be the next possible actions in the next two to
  three days.
   

  It was there for weeks.

  I can't get that degenerate anywhere. I tell myself that it's under warranty with HP support!

  So I turn on this Forum I saw a lot of things in the past from here that worked for me or the other pc that I was working at the time.

  So my fingers are crossed and just hoping that someone will know what to do.

  THANKS A MILLION IN ADVANCE!

  (and yes I know I'm shouting!)

  I'm waiting for a response before turning off or anything like that.

  
  
  
  
  
  
  

  
  
  

  
  

  Reminder, tell them that you talked with someone yesterday and had been promised a reminder. Tell them you need the fixed unit and you think it's a bad hard drive. Don't forget to stay nice and professional on the phone, it goes a long way.

• How to stop the Startup Repair?

  Hello
  I have a computer laptop hp2000, worked very slowly. So, I started an auto repair. But it fails to repair and repeat again and again. Showing a problem, "Boot Manager cannot find the operating system loader. error code = 0 x 5
  repair action: repair store boot configuration data
  Result: failed. Error code = 0 x 490
  I was also able to stop at the Startup Repair.
  I also tried to install new windows, but he fails again.
  Please help me as soon as you can!

  Hello

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the rescue CD.  Select boot options (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart the laptop.

  Kind regards

  DP - K

• Windows Update causes the Startup Repair

  Hello, recently I received a windows update and I installed and rebooted successfully, but during the restart he send me to the Startup Repair in which it is said that the only solution is to go back to an earlier era.

  That works, and then finally it asks me to download the update that requires to reproduce.
  It has happened several times already and I have no idea what I can do to solve this problem, please help

  Cleaning disc, go to start and type disk cleanup, and it will be displayed.

  For disk clean up take a look at:

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

• Startup repair and then updated conf. over and over again. operating system is vista.

  power on laptop goes to the Startup Repair and Configuration of updates then stops a restart, only to do it again and again and again.

  Follow the instructions and make a Bootable CD from him.

  Make the BOOTABLE CD into the computer that you downloaded for.

  Read the advice and follow it.

  Advice is given for a reason, because that is how the manufacturers recommended for:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And if this does not resolve the problem, transfer your question in the Forum of Windows updates:

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When repost you it describe exactly what happens when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Startup Repair:-using Skype, can I use the method of selection for me starts better what should I suggest? Thank you pp

  Startup Repair:-using Skype, can I use the method of selection for me starts better what should I suggest? Thank you pp

  Hello

  Welcome to Microsoft Vista Forum community!

  Please answer the following questions to help you better about it
  ·         What is the edition of Vista installed on the computer?
  ·         You try to make the Windows Vista startup repair?
  ·         How long have you used Skype for?
  ·         Are you facing problems starting with windows after downloading Skype?

  If you encounter problems with Windows startup after downloading Skype, then you can try to disable the startup of Skype at Windows startup. (For example, in MSN, go to tools > Options > General > do not start when Windows starts.)

  For more information, you can consult the help of Skype: https://support.skype.com/

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Concerning

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error Windows Vista Startup Repair

  My HP PC was working great until yesterday.  My son worked on Microsoft word and trying to launch Mozilla Firefox when the PC froze on him.  He tried to restart but failed to start.  He tried to use the system to repair, but it failed.  Attempts to mulitple system restore function have not as well.  Trying to avoid wiping the hard drive, so I thought I'd post the error here and see if he had any suggestions.  Repairing the system fails with the search for the following bugs:

  Unknown error checking: f4 error checking.  Parameters = 0 x 3, 0x88d1a2e0, 0x88d1a42c, 0 x 82232650
  Unknown error checking: f4 error checking.  Parameters = 0 x 3, 0x88ce4d90, 0x88ce4edc, 0 x 82270650

  The operating system is Windows Vista Home Edition.  I can't get into the PC via the mode without failure or any other means.  The only options seems to be via the command prompt, although I have not yet tried.

  All appreciated the thought...

  ·        Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not resolve the problem, try the following:

  To run the Bootrec.exe tool, you must start Windows RE. To do this, proceed as follows (some does not apply if you use the recovery disk - but to be honest I don't know if it will work with only a recovery disc):

  1 put the Windows Vista installation disc (or the recovery disk) in the disk drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click command prompt.

  7. type Bootrec.exe, and then press ENTER.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  ·        bcdedit/export C:\BCD_Backup

  ·        c:

  ·        Boot CD

  ·        BCD attrib s h - r

  ·        Ren c:\boot\bcd BCD.old

  ·        Bootrec /RebuildBcd

  If this does not work, try to start in safe mode (repeatedly, click the F8 key during the boot and go into safe mode with network - or do it from the command prompt on the drive).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator (skip this step if you are using the disk)...

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / Event Viewer - if you use the command line, type eventvwr and enter).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html

  Good luck and I hope this helps!

  Lorien - a - MCSE/MCSA/network + / A +.

• Computer turns on but does not boot to Windows, startup repair does not work

  When I turn on my laptop, it brings me to a screen titled "Windows Error Recovery" which means the following:

  "Windows did not start.  A recent hardware or software change might be the cause. »

  He asks me if I want to '(recommended) launch Startup Repair' or 'Start Windows normally'.

  When I select repair system, the screen turns off for half a second only and brings back me to the exact page as I was already on.

  When I select "Start Windows normally", he brings me to the loading screen that usually starts with Vista (anyone who says (c) Microsoft Corporation), except that it never stops loading.  I left for hours, and he was still on the same screen.

  I have a laptop Dell Inspiron 1525 with a processor Intel Core 2 Duo and Windows Vista Basic.

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• startup repair problem.

  I have an acer aspire 5920 equipped Windows vista and only recently, it has had problems with the start up. whenever I turn on the laptop Startup Repair guard arise and checks the system for problems. After a few minutes its says "windows cannot repair this computer automatically" and "If you have recently attached a device to this computer, like camera or portable music player, remove it and then restart your computer...". "When I cliquerai finish it again the whole process.
  I tried running on safe reboot of the last good configuration mode. and it starts repairing appears again.
  Help, please. Thank you.

  As the system restore does not work, try this:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If this fails, the Acer Recovery Options:

  http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

  Acer eRecovery made

   

  1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

  ·        The unit is able to reload Windows from this mode faster then CD.

  ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

  ·        Users are able to change the password in this mode for eRecovery only.

  ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

  ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

  2. in Windows, there are 3 ways to access eRecovery functionality.

  ·        Press Alt and F10

  ·        Open Acer eManager and then double-click eRecovery.

  ·        When a system is new it should automatically open this application and invite you to do the recovery media.

  See you soon.

  Mick Murphy - Microsoft partner

• My computer guard direct me to the Windows Startup Repair loop. Is this a virus? If this is not the case, what should I do?

  OK, here's a little history:
  When was surfing the Internet (using Mozilla Firefox), he froze and said that he "did not." Then I left the computer alone for a good 15 minutes, but to realize that nothing happened. From there, I decided to disconnect the computer to see if I can re - open Firefox. But when I tried to connect it back, the computer take me on the desk. It was stuck at the screen that says 'Welcome' (the form that appears after clicking on your user name) in the end, I turned off the computer by holding the power button, because there was nothing I could do. When I turned on the computer a few minutes later, it was time that I met a huge problem.

  The problem:
  When I turned it back on, a black screen appears that gives you the ability to boot your system with a repair on your computer, or start normally. I chose "start normally. After that, it took me a blue screen with a window that says "Startup Repair". He began to scan the computer saying «attempted repairs...» "When I saw this, I turned immediately shut down the computer, thinking it was some sort of virus that pretends to fix the computer. Nevertheless, I decided to turn it on for the second time. Of course, it's the same thing. But this time, I allow the scanning process to complete. When it was over, he said that the system could not be repaired and advised me to contact Microsoft, with my "contact information." I took this as a red flag, and click Cancel. I suspected it was an attempt to identity theft. (Though, I could be wrong, of course.)

  Honestly, I don't know if if there is indeed something wrong with the computer or if it's a virus.

  I tried to find out by going online and looking for solutions. From there, I tried a method where you press F8 several times until the Advanced Boot Options go up and selected "Last known Configuration" that did not work. I also heard on the "chkdsk" method, but I don't know how to do and there is no guarantee this will work.

  After that, I did more research and realized there were several ways to solve this problem. But when I went through the tutorials, the steps have been very confusing to me. I felt like most of these tutorials aimed computer technicians or people who knew in fixing computers. The steps were so confused until I found myself referring more questions than real answers!

  So now I'm reaching out to help, and I really need! It would be greatly appreciated! I really don't want to format all my data.

  Please keep in mind that I am a lover of computers operating. The two programs I normally use are Mozilla Firefox and Microsoft Word. So please don't be assuming that I know my way in and out of a computer. I'm no where near, in every sense of the term, an 'Expert '. If you can, I would like a simple, easy to follow, simple tutorial, step by step, which is not turned to professional users. Still, I am not very competent in operating computers.
  

  Hello

  You have tried yet.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

  p.s. If the message is genuine, please read this:

  The startup repair options are provided with a large number of systems of operating pre-installed.

  If this does not work, please read this

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

• Windows Startup Repair failed

  Event name: StartupRepairV2

  Signature 01: Autofailove

  Signature 02: 6.06000.16386.6.0.6001.18000

  Signed 03:6

  Signature 04:131074

  Signature 05: no root cause

  Signature 06: no root cause

  Signature 07:0

  Signature 08: 1

  Signed 09: System Restore

  Signed 02:0

  OS version: 6.0.6000.2.0.0.2561

  Locale ID: 1033

  my system repeatedly fails at startup. earlier repair work starts and when I select Restore restores point to last files.

  but on both occaisons I got a message saying that windows cannot repiar system and the error message as above was posted. later, the restore worked!

  Please help fix the winows

  Hello, Pushi_915,

  This question belonged to repair the system and recovery Forum.  Note the drop-down menus:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-System?tab=unanswered

  I've included the link for the same cause and resolution as follows:

  How to do a startup repair disk:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/startuprepairv2-with-problem-signature-01/e78dc24a-63e7-4314-8dc6-b1398981f41f

• How to skip the Startup Repair...

  How to skip the Startup Repair... I started from the install disc and want to "restore full backup for PC. I selected the partition with the corrupt windows installation. The process is suspended, check disk for errors. This check can be ignored. I know it is corrupted and you want to restore completely. No need for this control.

  Hello

  What happens if you leave the disk check to run its course without interfering with it?

  And it is not a good idea to have a backup on the same hard drive, due to the possible failure of the Hard Drive altogether.

  I'm sorry, but nobody here knows why, your system is damaged. There may be problems with bad sectors on the hard disk.

  I suggest download you Diagnostic tools for your hard drive manufacturer, make a Bootable disc and run a diagnostic test to see what the problems are, if any, there is with this hard drive.

  http://pcsupport.about.com/od/toolsofthetrade/TP/tophddiag.htm

  See you soon.

• Vista does not start, go straight to the Startup Repair / can not solve the problem

  5 month old Dell Inspiron 1440, Vista system unbootable, goes directly into the Startup Repair tool, tried F8, tried restoring, tried booting in the safe, he always comes back to the Startup Repair

  Message
  Prob event name StartupRepair V2
  Prob GIS 01 AutoFailover
  Prob GIS 02 6.0.6001.18000.6.0.6001.18000
  Prob GIS 03 0
  Prob 04 65537 GIS
  Prob GIS 05 unknown
  Prob GIS 06 NoOsinstalled
  Prob GIS 07 0
  Prob 08 1 GIS
  Prob GIS 09 FixPartitionTable
  Prob 10 1168 GIS
  OS version: 6.0.6001.2.1.0.256.1
  1003 locale ID

  Since this system is under warranty, call Dell, they tell me that it is a hard drive failure.  Is there anything I can try to fix?

  Thanks in advance

  Your Dell is 5 months old.

  It is under warranty.

  Dell will fix it.

  Do what Dell suggest regarding your warranty.
  Everything you do can void your warranty.

  http://support.Dell.com/

  Link above is Dell Suport.

  http://en.community.Dell.com/

  Communities of Dell at the link above.

  Here are the ways to back up your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon. Mick Murphy - Microsoft partner

• MS Vista startup repair couldn't fix the problem automatically

  Hello

  A little history - MS Vista was trying to install updates when the delivered system running. He failed. So I rebooted and it worked very well.

  When I re-started again after using it, even once, he tried to install updates. He failed. So I rebooted and it worked fine again. I went through the whole process several times in recent weeks.

  Then the other day, I got this screen start that says "Windows cannot repair this computer automatically. Since then, I can't get the computer started.

  The details of the problem are shown as:
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6000.16386.6.0.6000.16386
  03:6 problem signature
  Signature of the 04:524296 problem
  Signature of the problem 05: CorruptFile
  Signature of the problem 06: CorruptFile
  Signature of the 07:3221225624 problem
  Signature problem 08:3
  Signature of the problem 09: WrpRepair
  Signature of the 10:10 problem
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  In addition, all tests have been completed successfully, with the same error code = 0x0

  First cause is to the states that "Startup Repair tried several times but still not determine the cause of the problem."

  If I have to re - install the operating system again... I was not given a CDROM as a HP laptop... How can I actually re - install, when I do not have the CDROM?

  Also, I have some very important folders on the hard drive and I want to recover the files first before reinstalling the operating system...

  Any advice on how I can get before I have to destroy it by reinstalling the operating system would be greatly appreciated.

  Thanks to you all.

  As you don't have a Vista DVD, try this:

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For recovery disk/s and/or the use of the recovery Partition:

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?lc=en&DLC=en&cc=au

  Online 24/7 support for home and individual HP products

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  You can also make recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are in service again.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista does not start. I tried to run the Startup Repair tool and we have tried to select start Windows normally.

  original title: URGENT

  How to start Windows Vista when 'Launch Startup Repair' or 'Start Windows normally' did not work? I want to avoid the deletion of my data.

  Hello

  for starters, the info you received a DVD of windows 7 repair vista usage are BAD

  you need a DVD vists or a vista Startup Repair disk repair vista

  and you can NOT do a repair installation of booting from a DVD in vista

  Repair facilities are on within an operating system

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If necessary

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed