Connectivity w/sound issues

Similar Questions

• HP printer device manager! Symbol, "failed to connect" Windows Sound - still Printer Works

  Every time you start, I hear the sound of the device "Windows failed to connect.  How can I get rid of this?

  I have a printer HP of J6480 with WIn 7.  Device Manager does not recognize the printer driver.

  In Device Manager, the printer appears with the! error symbol.  No other devices have an error symbol.  The HP Solution Center and the printer work again.

  (1) I tried install fresh of the current HP software full functionality.

  (2) I tried the HP uninstaller program, through all five uninstall programs twice.

  (3) I ran CCleaner to clear the registry problems.

  (4) I tried to delete the Device Manager "Officejet! Entry J6400 series.  The Solution and the printer Center then do not work.  Apparently, the Device Manager recognizes the printer but not the driver.  I have to go to 'Programs', 'HP', then 'Officejet J6400 Series' to reinstall the software.

  (5) I tried to get the Device Manager to recognize the software.  When I click on «!» OfficeJet 6400 series', I get the message "the drivers for this device are not installed (code 28).  If I then click on 'Update Driver' and select' Browse my computer for driver software"then click on"Browse "C:\Users\Myname\Downloads", where I have the Sofware HP 13.0 full feature software and basic print and Scan Driver files, he says "Windows cannot find driver software".   If I click on "Search automatically by the driver software", I get the same message.

  I would appreciate ideas!  Thank you!

  Friendlycomputr,

  OK, if a few things stood here:

  1 windows its "cannot connect device" sounds only with a direct connection, not a network connection which is what you have. (Ethernet)

  2. have you had any other device installed on this computer is more active?

  I would like you disconnect the Ethernet connection and go below:

  1. uninstalling the printer software

  2. make a restart on the computer, when it starts, do you hear the sound "device cannot connect?

  Let me know.

• My Windows 7 Pro system has some serious hardware, internet connection and security issues. The system image and restore the system in case of failure.

  My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is whether a professional Ultimate upgrade will or will not fix these bugs.  In addition, what is the cause of restoring the system to fail?  I never turned off or cannot create regular restore points.

  Original title: upgrade a "Fix" for existing system problems?

  My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is if an upgrade to Professional Ultimate will be or not correct not these bugs.  Also, what is the cause System Restore to fail?  I never turned off or cannot create regular restore points.

  Hello

  1 re-installing/repairing software will not fix hardware issues.

  2. the operating system upgrade is not the way to solve computer problems that can be carried forward.

  3 1. If you use Norton, you should disable Norton inviolable Protection before using System Restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________

  We really need for more details:

  "My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  See you soon.

• Bowers & Wilkins T7 Bluetooth speaker connected, no sound

  Connects to the speaker, but will not make a sound. It isn't muted in the sound preferences and it won't work for any sound, not iTunes, amazon etc... I have sound from all of these places if I disconnect and use the laptop speakers. Can I use the speaker with other devices, such as my iPhone.

  My macbook pro, retina, 15 "mid 2015 Yosemite 10.10.5 running

  Hi Larisa,.

  Sorry to hear that you are having problems with the T7, I hope that we can help you solve this problem!

  We have not heard of this problem before, but it does not sound as if there is a setting on the Mac preventing the audio to be heard (that you've properly read audio from your iPhone to T7).

  Do you have other Bluetooth speakers or headphones available to test with? It will be interesting to know if others connect and read audio data from your Macbook, because this will help you isolate the issue either with your Mac or the T7.

  Kind regards

  Bowers & Wilkins Support

• When don't my tv with hdmi cable connection no sound or image since the upgrade to w8 to see my tv but not

  HP G60 100EM

  W8 64bits

  NVIDIA

  No picture or sound on TV when connected by an hdmi cable.

  in nvidia control is see my tv.

  also coprocessor not installed eooro driver code 28

  Well,.

  1. The laptop is not supported by Windows 8. I have no doubt is the reason that you are experiencing this issue.

  You can follow this DOCUMENT for information about the HDMI connection.

  THX

• Irritating device connect/disconnect sounds

  I have a Dell Vostro 1510 laptop with the update to SP3 and XP Professional operating system. While listening to a music CD, I get intermittent device unplug his follow up immediately by the device connect sound. There is no indication of the offending device. What gives?

  Hello

  1. have you made changes on the computer before this problem?
  2 do you find this sound only during playback of music CD?

  Step 1: Search for the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Startand then click run.
  2. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  3. click on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• When connecting headphones, sound plays simultaneously headphones and speakers.

  Original title: sound problem

  When I plug my headphones on my laptop the sould goes through them and only them. Then, after about 20 minutes (and this happens every time) sound starts coming out the speakers and headphones at the same time. When I go to playback devices is no helmet, right speakers (currently enabled). How can I get sound only the helmet?

  Hi MichaelB22,

  1. were you able to use the headset before without any problem?

  2 did you a recent software or hardware changes to the system?

  Method 1:

  If you connect the headphones to the front taking, then try to plug on the rear Plug and check if it helps.

  You can also try using a different helmet and check for the issue.

  For more information, see the article:

  Connect one microphone, music player or other audio device to your computer

  Method 2:

  You can try disabling the speakers and check if it helps.

  a. click Start and Control Panel.

  b. click hardware and sound , then sound.

  c. on the Read tab, check the speaker settings.

  d. right-click on the speaker and select disable.

  e. click apply and then click ok.

• Satellite P50T-A-125 - connectivity Wi - Fi issues

  I have major problems connecting to WiFi with your laptop by Satellite P50t-A-125.
  We have 3 of these laptops in the House, but only have WiFi connection problems with one of them.

  No matter where the laptop (home, hotel, etc. overseas), the problem is the same.
  It will connect to the local WiFi "hot spot" / hub, but does not connect to the internet and the "limited connectivity" message appears.

  It is a problem very annoying and tedious, help or advice to fix it would be greatly appreciated.

  Best regards - SSG.

  Hello

  I think you should start by WLan driver update.
  For the most part, limited connection issues could be resolved by Wlan updated driver.

  I know the laptop was equipped with Intel Wireless-N 7260 more Bluetooth Wlan card

  The latest driver for this Intel page could be downloaded from the Intel Web site:

  [Intel® Wireless - N 7260 | https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+ Networking & ProductLine = Intel % C2% AE + Wi - Fi + products & ProductProduct = Intel % C2% AE + Wireless-N + 7260 & ProdId = 3713 & LineId = 1784 & FamilyId = 1783]

  Your comments appreciated

• 251 - a123wb Office with22uh MB: sound issues

  Just got this system 2 days ago. Apparently there is no sound associated with this monitor.  I'll have to buy speakers? I did have a system of office for many years. Where would I plug in speakers? I looked at the back of the monitor. Don't see any type of connection. Please help me!

  Hello:

  Yes, you need to buy a set of speakers for computers and they plug into the back of PC Tower, not the monitor.

  Here is the link to the section of the motherboard of your PC and the ports are marked as to where things hook up to.

  You would connect the speaker plug in port number # 8.

  http://support.HP.com/us-en/product/HP-251-A100-desktop-PC-series/8499652/model/8888621/document/c04383000/

  Figure: Nuts of nutmeg-P rear i/o ports

  1. DC power input

• Apple Mac Mini Sound issues 2009

  Audio greyed out icon was used, until I tried hanging speakers to it and it does not detect it as an output device. I tried 2 different speakers and nothing, I tried to use headphones and nothing, he said: "no output device available." I deleted the BezelServices.plist and rebooted, I started in SafeMode... nothing doesn't work. I have it hooked up too a gateway FPD1560 TFT LCD monitor. There is no USB ports or sound jack on the screen itself that I'm missing. If someone else has had this problem and how they did solve it?

  disconnect whatever it is connected to the headphones Jack

  go to: Menu Apple > System Preferences > Sound > output tab

  Select the internal speaker:

  

  If a headset that works, an amplifier connected to speakers or a speaker powered (built-in to a speaker amplifier)

• Computer freezes black screen sound issues and

  Original title: yahoo Messenger

  I had never knowingly Yahoo Messenger, but a pop-up window appears asking me to accept or refuse the person. I don't want that. I went to your site and said to uninstall the program, received PC cleanup site. I did what was said, but have never informed if it was cancelled or if something happened. I had several problems with my laptop since the popup YM began.  for example: CURSOR FREEZE, FREEZE PAGE, BLACK SCREEN, SCREEN CHANGES to A DIFFERENT SCREEN WITHOUT MY DOING anything, MY SOUND is not WORKING ON THE VIDIOS.  I'm not technically oriented - I am 75 and just try to read my email and read the news.  I now have the PC Cleanup icon on my site.  How will I know if YM has been deleted?

  Hello

  1. which version of the operating system are you using?

  2 what is online video or recorded video that doesn't play sound?

  To check if the software is still installed, you can follow the steps mentioned below:

  1. click on Start, type appwiz.cpl in the start search box and press on enter

  2. check if the Yahoo Messenger appears in the list of installed programs.

  Dealing with the issue of the freezing of the computer:

  Method 1: Scan using Microsoft scanner

  See the following site:

  Microsoft safety scanner

  http://www.microsoft.com/security/scanner/en-us/default.aspx.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2:

  Check if the problem persists in safe mode. If the problem persists not in safe mode and check if the problem persists in the boot.

   

  Safe mode:

  Windows 7:

  Step 1:

  Start the computer in safe mode

  For the open procedure the computer in safe mode, open the site mentioned below:

  See the following site:

  Start your computer in safe mode

  http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode.

  Step 2: Clean boot

  See the following site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: once you are done with the boot, follow step 7 article to set your computer to normal startup.

  Method 3: Update the video drivers

   

  See the following site:

  Updated a hardware driver that is not working properly

  http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.

• HP Wireless TV doesn't Connect - no sound from the TV

  HP G60 - 235DX notebook PC with Windows Vista.

  HP Wireless TV Connect WY555AA #ABC model

  Connected to the HDMI port - 2 on a Samsung HD 52 '' TV

  The video is great, but no sound from the TV speakers. Sound plays on the mobile speakeres.

  I checked the Device Manager on the laptop and the drivers are up to date and there are no conflicts.

  Help, please.

  Thank you

  Hello Larry,.

  Please take a look at this document, which provides troubleshooting steps that should help you resolve your problem of 'no sound', connecting your laptop to your Samsung TV via an HDMI cable.

  Please let me know if it helps to solve your problem.

  Good luck!

• Place 11 Pro 7130 i3 (model no-VPro) connected ongoing sleep issues again?

  Hello

  I noticed that despite a number of improvements with the last firmware panel touch (the rare involuntary repetition of letters) and still a problem of firmware (no more wifi from the A13 firmware problem) device always on my 11 venue Pro model i3: during sleep sessions connected excessive battery drain.

  What happens is that, after leaving the appliance for 8 hours (overnight) connected standby battery has already drained almost 50%, which, as far as I understand, is much higher than that should be the case, while often after the awakening of the device, I found that another application may have open or some kind of parasite entries occurred.

  For now I've worked around the issue by disabling connected standby mode of the registry, which has the additional advantage of allowing hybernation in the stop menu. This, however, is a suboptimal solution because it seems necessary to either press the Windows logo on the chassis of tablets and THEN press the power button for a good second to wake up the unit, or with the keyboard connected, it is necessary to close the Tablet and re - open, followed by the same press the power button.

  Given that I seem to not be the only one with this problem and the lack of software updates for the device-specific over the past months, I would ask Dell if these issues of connected intelligence are still studied on the 7130 with a possible solution to come in the form of firmware updates or otherwise , or if attention was completely shifted to the model with processor Broadwell followed 7140.

  Update for the people of the future: using this version of the SD card reader driver seems to fix the problem, which should have returned to a default restart driver driver specified on the support of the 11 Pro place Web site must be installed in Windows.

• cable connecting the sound card to before i/o Panel for XPS 420

  I have a desktop computer XPS 420 I recently installed a Sound Blaster X - Fi Sound card on. I found that I need the cable that connects the new sound card to the audio of the front panel IO on the XPS 420. The sound blaster card appears to be a connector 10 pin but the plug on the i/o Panel seems to be much larger, as a 20 PIN... but I'm not sure. Anyway, I can't find a cable that works. Anyone seen elsewhere or solved this problem before? There was a post for a similar situation for a XPS 410 computer, but I don't think that the solution to this post will work for me (not sure this is the right cable). Thanks to someone out there who can help.

  
  

• MacBook Pro/Windows 7 driver sound issues

  I own a macbook pro, one of the new models of unibody 15 inches and since the installation of Windows 7, I was not able to properly use the microphone (on Windows) and sound acted pretty strange.

  The OS x included with my computer installation cd is supposed to install the necessary drivers on the windows side, and it seems to have done that, for the most part, except that I couldn't use the microphone in a multitude of applications. The control panel "sound" recognizes the microphone and shows that the microphone is receive sounds. The small green level bar next to "microphone" move when I make noise, yet no application appears withdraws all the sounds.

  After a little research, I gathered that the soundcard in these is actually a Realtek HD card and not a card Cirrus Logic, which is what I had drivers. So I tracked the Realtek driver, I thought I needed, uninstalled the Cirrus Logic driver and installed realtek one. However, this realtek driver does not seem to do anything, because the driver is now just listed as high definition Audio Device, which is the standard windows driver.

  Other issues I had with the cirrus logic driver - once I plug the headphones, I can't sound on speakers of the laptop again unless I have restart windows. In addition, if iTunes plays the sound in all other programs in the past and not coming back unless I restart the program.

  I guess I need to know if A) I am not mistaken on the Realtek is the right driver, B) cirrus driver is in fact correct and there is another solution for the microphone and other problems or C) there is no hope.

  Thanks in advance.

  So it seems that my problem now is that the realtek driver does not work. I downloaded the executable version of the driver first and installed, but when windows restarts, the sound icon at the bottom right has a red cross on it and after a quick diagnosis, he told me there was a problem with the driver. So I downloaded the file .zip of the drivers, uninstalled the 'old' and extracted the new and after a reboot, same thing. Red X.

  If I let windows solves the problem, restart, I am back to the driver high definition Audio Device windows and I have no sound from my speakers, that my helmet. And still no microphone function.