SSH is not supported on cat4500e-universalk9. Spa.03.04.01.SG.151 - 2.SG1.bin
cat4500e-universalk9. Spa.03.04.01.SG.151 - 2.SG1.bin installed on cisco 4500th with SUP7-E, the license level is enterservice, but impossible to find, use "generations key cryptographic rsa ' to activate ssh in CLI. Who can solve it? think!
Dear Yang,
Could you please paste extracted the following command from your device? . I suspect that your switch is running on the base without K9 image license.
See the version
See the bootflash
See the bootvar
HTH
Santhosh silou
Tags: Cisco Network
Similar Questions
-
Dear professionals,
I have a 4506-E with the following information. I tried to enable ssh on but is not possible. It has a known domain ip and host name.
Software, Cisco IOS - XE, Copyright (c) 2005-2010, 2012 by cisco Systems, Inc.
All rights reserved. Some components of the Cisco IOS - XE software are
distributed under the GNU General Public License ("GPL") Version 2.0. The
software licensed code GPL Version 2.0 is a free software that comes
WITHOUT ANY WARRANTY. You can redistribute it and/or modify it
Code GPL under the terms of the GPL Version 2.0. For more details, see the
documentation or "Mention of license" file that accompanies the IOS - XE software.
or the applicable URL listed on the brochure that accompanies the IOS - XE
software.Information about the license for "WS - X 45-SUP7L-E"
License level: ipbase Type: Permanent
Next reboot license level: ipbaseVariable BOOT = bootflash:cat4500e - universalk9. Spa.03.04.04.SG.151 - 2.SG4.bin
Please, I would like to know what the problem is.
Salvation;
Your switch is not boot through cat4500e-universalk9. SPA. 03.04.04.SG. 151 - 2.SG4.bin, his normal starting with IOS (no crypto K9 image).
If you see the message below:
I see that the boot variable is not the same as the software Cisco IOS, IOS - XE Software, switch Catalyst 4500 L3 (cat4500e-UNIVERSAL-M), Version 03.04.02.SG , RELEASE SOFTWARE (fc1)
This is due to the new image you upload do not match the value md5 or during the download, the image corrupt.
Thanks & best regards;
-
EtherChannel does not support on 400 7600 - SIP
Hello
I'm a very big dilemma. I have 1 Gbps connection to my ISP. I'm under BGP to establish connectivity with the provider PE.
Just to inform you, I have redundant connections on the connection of 2 - Cisco 3750 (main & secondary link) next to service provider and there are 4 routers for 2 services (primary and secondary each for 2 services) now use on services - 1A applications increases and reaches 900 ~ 950 MB/s, is not on the impact of the services-2 I pushed the 2 services via secondary link traffic. I have attached ppt for some knowledge
Until a few weeks back the use was about 750 in the direction of entry and 700 Mbps in the exit direction of the WAN port on the service routers 1, but now the use of entry began to reach 900 ~ 950 MB/s in the direction of entry.
I have 400 7600 - SIP (void crack-5XGE-SPA) on the routers [services for Qos ] are related to the switches. I spoke with the service provider, and they said that they would consider more and while I thought to do the first aggregation of ports-2 between the provider of Service & 3750 switch device and an another 2-port aggregation between 3750 Switch & services-1 (Cisco7606) router.
There is no problem to create aggregation Service Provider betn ports device & switch 3750. It does not go between 3750 & services-1 switch (Cisco7606) router according to Cisco aggregation port document being not supported on 7600-SIP 400.
It takes time for the service provider to provide 10 port of concert. I WS-X 6548-GE-TX module Services-(Cisco7606) 1 router. So, I thought WS-X 6548-GE-TX router connection ports on the router with switch and create port channel between Them.But I wonder how would function QOS can be used.
So I need a Council if WS - X 6548-GE-TX ports support QOS with Etherchannel.
Your advice will be appreciated
R.
Valerie
The 3750 is a layer 3 switch. Could you change the design to allow links to layer 3 through him?
What get a 10Gbe for the 3750 and your 7600 module (s)?
-
SSH v2 taken supported under 6.2 IPS?
When you try to copy the current config on a server using the scp, we received the following error message:
The major protocol versions differ: 1 vs 2
Remote Protocol version not supported for the host, w.x.y.z. - must support SSH version 1.
Is it possible to activate SSH version 2 support of PCs under the IPS?
SSHv2 is supported of the traffic of IPS (IPS acting as server), but it is not taken in charge when IPS acts as a SSH client.
Syed Iftekhar Ahmed
-
Hi all
Production site:
IBM midsize V7000 and FW level: 6.4.1.4
SRM worm: VMware-srm - 5.1.1 - 1082082
SRA: IBMSVCSRA_v2.2.0.130422
IP: 192.168.70.50
vCenter 5.1 U1
Recovery site:
IBM midsize V7000 and FW level: 6.4.1.4
SRM worm: VMware-srm - 5.1.1 - 1082082
SRA: IBMSVCSRA_v2.2.0.130422
IP: 192.168.70.60
vCenter 5.1 U1
When I try to add the table then this error has occurred
SRA command 'discoverArrays' failed. Invalid ID Array.
Refer to IBM SAN Volume Controller troubleshooting
And the SRM journal is attached.
But I see this part of the newspaper.
Sorry for the bad English.
--> < name > discoverArrays < / name >
--> < OutputFile > C:\Windows\TEMP\vmware-SYSTEM\sra-output-12-119 < / OutputFile >
--> < StatusFile > C:\Windows\TEMP\vmware-SYSTEM\sra-status-13-225 < / StatusFile >
--> < LogLevel > verbose < / LogLevel >
--> < LogDirectory > vCenter Site Recovery Manager\Logs\SRAs\IBMSVC C:\ProgramData\VMware\VMware < / LogDirectory >
--> < connection >
--> < login id 'primary' = >
--> < address >
--> < code address = 'spA' > 192.168.70.50:5989 < / address >
--> < code address = "spB" > 192.168.70.60:5989 < / address >
--> < / book >
--> < username > * < / username >
--> < password > * < / password >
--> < / connection >
--> < / connections >
--> < / order >
2013 06-20 T 14: 34:33.395 + 03:00 [02020 'SysCommandWin32' verbose opID = 258F28AC-0000001 has] from process: "C:\Program VMware vCenter Site Recovery Manager\external\perl-5.14.2\bin\perl.exe" "C:/Program Files/VMware/VMware vCenter Site Recovery Manager/storage/sra/IBMSVC/command.pl.
2013 06-20 T 14: 34:33.395 + 03:00 [02020 'SraCommand' verbose opID = 258F28AC-0000001 has] reset SRA command timeout for '300' seconds in the future
2013 06-20 T 14: 34:33.395 + 03:00 [02020 'SraCommand' verbose opID = 258F28AC-0000001 has] listening to updates to the file 'C:\Windows\TEMP\vmware-SYSTEM\sra-status-13-225 '.
2013 06-20 T 14: 34:33.395 + 03:00 [02020 verbose "PropertyProvider" opID = 258F28AC-0000001 has] ASSIGN RecordOp: info.progress, dr.storage.StorageManager.createArrayManager1
2013 06-20 T 14: 34:33.441 + 03:00 [02444 'DrTask' verbose opID = 258F28AC-0000001 has] created task VC 'com.vmware.vcDr.dr.storage.StorageManager.createArrayManager:task - 3901'
2013 06-20 T 14: 34:34.065 + 03:00 [01496 info 'SraCommand' opID = 258F28AC-0000001 has] stdout of discoverArrays:
-> discoverArrays
-> By Haz 20 14:34:33.909: [Info] the execution Module [constant] Inatall path: [C:\Program VMware vCenter Site Recovery Manager\storage\sra\IBMSVC\]
-> By Haz 20 14:34:33.909: name of SRA for the [constant] runtime [Info]: [IBM System Storage SAN Volume Controller adapter for VMware vCenter Site Recovery Manager] uuid: version [38295F72-F7D0-4A0F-B8D4-FF9821AB2675]: [2.2.0.130422]
-> By Haz 20 14:34:34.19: file commandName for the runtime [SRARunner] [info]: [discoverArrays]
-> By Haz 20 14:34:34.19: runtime [SRARunner] logLevel [verbose]: [comments]
-> By Haz 20 14:34:34.34: Module enforcement [verbose] [SRARunner] output file: [C:\Windows\TEMP\vmware-SYSTEM\sra-output-12-119]
--> 14:34:34.34 by Haz 20: [fatal] runtime [SRARunner] command not supported: [discoverArrays]
->
2013 06-20 T 14: 34:34.065 + 03:00 [01496 error 'SraCommand' opID = 258F28AC-0000001 has] stderr of discoverArrays:
-> com.ibm.cstl.hsg.sra.svc.SRAException: command unsupported: [discoverArrays]
-> to the com.ibm.cstl.hsg.sra.svc.SRARunner.execute(SRARunner.java:100)
-> to the com.ibm.cstl.hsg.sra.svc.SRARunner.main(SRARunner.java:173)
->
2013 06-20 T 14: 34:34.065 + 03:00 [01496 "SraCommand" verbose opID = 258F28AC-0000001 has] Stopped listening to updates of file 'C:\Windows\TEMP\vmware-SYSTEM\sra-status-13-225 '.
2013 06-20 T 14: 34:34.065 + 03:00 [01496 "SraCommand" verbose opID = 258F28AC-0000001 has] cancelling SRA command timeout
2013 06-20 T 14: 34:34.065 + 03:00 [01496 info 'SraCommand' opID = 258F28AC-0000001 has] discoverArrays came out with exit code 0
2013 06-20 T 14: 34:34.065 + 03:00 [01496 "SraCommand" verbose opID = 258F28AC-0000001 has] discoverArrays responded with:
--> <? XML version = "1.0" encoding = "UTF-8"? >
"--> < response xmlns ="http://www.vmware.com/srm/sra/v2">."
--> < error code = "4" / >
--> < / answer >
I solved this problem.
The problem was MRS. Server intalled on the regional settings of Windows Server 2008 R2.
My locale of the server was Turkish, when I install MRS I changed to English and installed.
Finally, I reinstall Windows Server 2008 R2 full English for the United States settings after installed SRM.
It has been worked.
-
Hello
I'm working on a (free) version without updating ESXi 4 license
In the unsuppoprted ssh using and scripts of J.Holland I'm programming without supervision of emergency stop (with UPS APC and apcupsd linking VIMA)
I'm trying the script step by step: after stopping all running vms (with & lt; code & gt; vmsvc/power.shutdown vim - cmd) & lt; / code & gt; I needed to stop graciously host Esxi (a dell PE 2950)
so I did:
~ # /sbin/shutdown.sh
Stop running from sfcbd-watchdog
Stop Sfcbd
Stop wsmand running
Stop Openwsmand
Guard-openwsmand dog: watchdog terminal with PID 1557
Stop sfcbd running
This operation is not supported.
Please use start /etc/init.d/sfcbd-watchdog
Stop slpd
Stopping slpd
Stop to spend running
Watchdog - pass: Terminal watchdog with PID 1475
Stop running ntpd
Ntpd stop
config loaded implicitly
Saving the current state in /bootbank
Clock day.
Time: 09:22:18 Date: 2009-05-20 UTCand then:
~ #/ sbin/poweroff
poweroff: No.Why the host refuses to stop?
Thank you
Guido
What is the tail after the virtual machine is stopped and then by running poweroff? No maintenance mode, but any running virtual machine?
-KjB
VMware vExpert
-
Quicken essentials not supported
I need a new program to replace Quicken Essentials. I upgraded to Sierra, and it is not supported. My needs are simple. I just need to follow my checks, deposits, withdrawals, bills paid etc... I would like to be able to import my backup Quicken Essentials. Can anyone suggest a program?
Thank you.
Quicken 2016 can import the data.
(144948)
-
Hello
My girlfriend and I bought one to the iPhone in the United States a few weeks ago. We live in the Netherlands, so we asked for the correct model (A1723) and a sim phone so it should work on our carriers. We did not have a simcard nano of our carriers at the time so they have unlocked the phone with a card of sprint (without contract). Now, we're back in the Netherlands and we have tried our new SIM card and we get the "Sim not supported" error. It's almost as if the phone isn't sim for free. We called apple support in the United States and we talked for over an hour, and he could not understand the problem. According to him, the phone has been unlocked.
We also called our subsidiary of KPN (simyo) carrier and they said everything was ok on their end, the problem is with apple. If we are really stuck here and I don't know what the problem is. Can someone me the phone is unlocked, because I'm still not convinced. And in this case, what should I do because the lady who helped us said it was free sim...
Thanks in advance.
Ruud
Where did you buy this phone. It seems that if activation with the Sprint card has caused your question. But knowing where you bought it.
-
Dear Sir.
Last week, I restored AND updated to LATEST iOS IN my iPhone 5 c through iTunes. Subsequently, I get the error message 'sim not supported. " Now, I could not use my iPhone. Phone IMEI is *. Please advise what I need to do?
Thank you and best regards,
Mostapha N,.
Mob *.
< personal information under the direction of the host >
Your iPhone has been hacked to be used with other sim cards?
Seems as if a jailbreak or other similar hack was in place to allow other carriers sim cards to work on it. When it has been updated the hack or jailbreak is removed.
Your only option is to know what carrier its coastline and see if you qualify for them to unlock properly.
Also please do not post your IMEI number in a public forum.
-
I just bought an iPhone 4 and now I can't download apps from the App Store because it says I need iOS 8 but the iPhone 4 supports ios 8, how can I download apps?
Return the iPhone 4 and buy an iPhone more later from model.
The iPhone 4 does not support any version of iOS iOS 7.1.2 above.
-
Apple TV (4th generation) not supported
My Apple TV (4th generation) worked very well, Soddenly I get message on television that not supported. I connect it to my computer and updated the software to 9.2.2 but still same message, any help
Hello. Which is exactly the message you see? Are you sure that's coming from Apple TV and no the TV set? What do you do when you see the message?
-
Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?
The SIM card is not support indicates that the iPhone is locked to the American carrier that it has been activated with. In order to obtain the released lock it is necessary that you talk to the carrier to find out what their requirements are to release the lock. They are the only ones who unlock it so that it can be used with another carrier.
-
iPad is computer "Not supported" on bluetooth
I want to play sound from my iPad to my computer, but when I connect it says "{computer name} is not supported." I have an iPad 3 currents 9.3.4
This isn't what is iPad Bluetooth for. As the message says, it is not supported.
-
I spend at each opening of webex session you transfer files to temporary webex because Firefox 64 is not supported. I don't understand why Mozilla and Webex need to make things difficult for customers not to overcome differences. Should I go back use of considerably older Firefox which is always in 32-bit code? Can I load both Firefoxe versions on the same machine or they will conflict?
DonJoyceWard said
Should I go back use of considerably older Firefox which is always in 32-bit code?
The current version of Firefox 42.0 (Win32/Win64) is not older. Firefox 45.0a1 nightly compilations you are testing is in development and not even close release. Release of < beta < Aurora (developers edition) < every night
If you wanted to Win64 Firefox there is a release of 42.0 Win64 Firefox it is, however, not so public on mozilla.org
https://archive.Mozilla.org/pub/Firefox/releases/42.0/Win64/The Win64 Firefox 42.0 has 64-bit Flash Player white listed. The next exit Win64 Firefox 43.0 looks like 64-bit plugin Silverlight will be white listed.
-
PC firefox guard asks me to install firefox on my android, which is not supported.
The version of Firefox PC appears and request "do install you Firefox on your Android device. When I try, I am told that my phone is not supported. Later, the popup appears again. And once again.
Hey people. The bug has been fixed in blink of an eye, and you should not see the prompt. I understand that it was boring, I say all the time by disabling the functionality of browser.selfsupport.url.
Heartbeat is the main duct, we have to communicate with our users. Based on the responses that we get to our research of current heart rate programs we change the future of Firefox. We are committed to building products for our USERS. The only way for us to do is to communicate with our user base impressive on a regular basis.
Then please consider Heartbeat on now that the problem has been resolved. If you see a heartbeat prompt asking you your feedback, please consider replying. We want to hear from you!
Maybe you are looking for
-
Problem with the published parameters between the movement of FCPX
Hello I have a little problem with the settings published between the movement at FCPX. For some reason, the published parameters have different values within FCPX in movement. For example, in motion, a parameter is - 187.04 and in FCPX is-0,19. What
-
Satellite L350 - drive DVD Toshiba turns off my color scheme
Hi all. I use a Satellite L350 with Vista Home Basic. According to the instructions on the help page of DVD player I have the color scheme defined in Windows Vista Standard and the display settings to the highest (32 bit), but DVD player insists on c
-
The computer screen does not turn off after the specified power Options
I tried several ways on trying to turn off my monitor of my laptop through the options of food and the use of some applications such as nircmd but nothing works every time. I'm sure it can be a program I am not using a device. I have a wireless mouse
-
Cannot download my upgrade now
I've had CS6 in 2012 with CS4. My computer threw a fit and I had to have a resettlement and of course every thing is out. I reinstalled my CS4 and are now trying to reinstall my CS6 for 2 days. All goes well until I receive a notice that the Instilla
-
How to map Due date from Jdev to show in the workspace of BPM
HelloRequirement:Due date for human tasks (which are defined in jdev) should be visible in the workspace of BPM.I added due date BPM workspace under the process of follow-up and observed that the column does not reflect the due date column.I found in