SSH v2 taken supported under 6.2 IPS?

Similar Questions

• Network adapter (device Bluetooth (Personal Area Network) and Btooth works does not after installing W 7 Ultimate__ (Situation Reported to microsoft Hel and Support under SRX1120597135ID Without solution untill today))

  BTooth works do not after Windows Vista upgrade (Btooth works without problems) for W7
  At the moment I have problems connection BlackBerry device and other devices via Btooth
  messages 1: 'softwarfe device driver was not successfully installed ".
  message 2: "WIDDCOMM Bluetooth Software 6.1.04403 Dell Incompatible" (WIDCOMM = Broadband - manufacturer)
  In short, the list obtained messages:
  1 device driver software was not compatible
  2. incompatible software Bluetooth
  3. the drivers are not installed: lists of codes (31) (28) (10)

  Report of the final situation for Microsoft Help and Support under SRX1120597135ID (withoutany positive response so far, I have been asked to report through this forum, I hope a solution will be here)
  I tried all the options you will find in google without success.

  I contacted Dell and Bradband and I have upgraded to WIDCOMM Bluetooth Software 6.2.0.6600 available in Dell Support without positive results.

  Repost: Windows Update has nothing to do with the upgrade of Windows. Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error when you try to run Quicken 2011: this program is not supported under XP

  Win XP pro - Quicken 2011

  I am running win XP pro. When you try to run Quicken 2011 I get an error message: this program is not supported under XP.  What I do toget Quicken supported?

  For help on Quicken, I recommend posting your question in the community live Quicken .  The people there can help you better as we can in this forum of Windows. Boulder computer Maven
  Most Microsoft Valuable Professional

• View v3.1 is supported under vSphere 4.1?

  Hi all

  We have an existing installation of view 3.1 under VI3.5, and we plan to upgrade to vSphere 4.1 or vSphere 5 (we must deploy servers of W2008R2).

  The question is, is seen 3.1 supported under vSphere 4.1 or 5? I can't find any info of VMware docs.

  We can also upgrade view (although there is no way to view upgrade 3.1) but it would be another project and we do ot as simple as possible.

  Thanks in advance.

  Kind regards

  Gus

  See 3.1 is no longer supported. It has reached its end of general 03-07 and end of service support to 03-09.

  Looking at the documentation for 3.1 (under support / Documentation / View)

  See 3.1 has been supported only with 3.0.2 VI and VI 3.5

  WP

• Adobe officially support under Photoshop VMware?

  I need to convert Photoshop discrete servers for an image based on a VMware/resizing Blade Server environment.

  Adobe officially support under Photoshop VMware?

  In addition, what versions of ESX are currently tested and supported?

  I understand you may need some configs special to get licenses to work... What is it?

  Also, if some versions of Photoshop are supported and others are not supported under VMware, I need to know that as well.

  How to get to a product manager at Adobe?... For gods sake, they have a blockade of customer service to get a person who knows such things.

  Thank you

  Cody

  It is not supported in some way and that that settles.

  Mylenium

• Satellite A300 - 1 5 ACPI is not supported under Linux

  I have laptop Toshiba A300 - 1 5. When I run Windows absolutely everything works fine.
  But when I boot Linux (I tested the two 8.10 of Ubuntu and Fedora 10), Fn keys does not work.
  Neither is bluetooth, which is a USB hidden and disabled by default.

  I noticed that pilots * toshiba.ko* and * toshiba_acpi.ko* cannot be loaded.
  I tried to load them, but both * dmesg * and said */var/log.messages*: * {color: #000080} not a cell phone supported. {color} *.
  I also tried to use * toshset, toshutil, fnfx *, but they all need * / dev/toshiba * and * / proc/acpi/toshiba * or * / proc/toshiba * exist.
  And it is impossible to load them, because the cell phone is not supported.

  I have two questions:

  1 Toshiba plans to cooperate with suppliers of Linux in order to fix this bug.
  I have visited many Linux forums and many people's complaint they have keys functional unfunctioning under Linux.
  So, I think that if the product is thrown on the market, it must be supported, is it not?

  2. How can I temporarily fix this bug to get the missing functionality before the next version of Ubuntu or Fedora? Can someone advice any solution.
  (Well, please don't say: leave Linux and use Windows.) I want to use Linux, not Windows. "And I want a job in the same way).

  If you want additional information about a bug, I will provide.
  Thank you very much.

  Hello!

  I have a Toshiba Satellite A300 - 1 M 1 PSAGCE under Ubuntu Intrepid (kernel 2.6.27.11).

  _I realized that only Ricoh SD/xD Card does not work (it worked on VIsta). _

  Anything else is OK.

  I think that our laptops are related, take a look at my ACPI and journal modules.

  Bq. + $ lsmod | grep acpi +------+ 16400 1 acpi_cpufreq +------+ freq_table 13568 3 acpi_cpufreq, cpufreq_stats, cpufreq_ondemand +------+ 4 47800 acpi_cpufreq processor, thermal +.

  Bq. + $ ls/proc/acpi / +------+ battery dsdt event fadt fan info power_resource processor embedded_controller ac_adapter sleep thermal_zone wakeup video +.

  Bq. + $ dmesg | grep-i acpi +.
  Bq + BIOS-e820: 00000000bfe86000 - 00000000bfebf000 (ACPI NVS) +------+ BIOS-e820: 00000000bfeee000 - 00000000bfeff000 (ACPI data) +------+ ACPI: USE 000FE020, 0024 (TOSINV r2) +------+ ACPI: XSDT BFEFE120, 0064 (r1 TOSINV TOSINV00 1 1000013) +------+ ACPI: FACP BFEFD000, 00F4 (TOSINV TOSINV00 1 MSFT 1000013 r4) +------+ ACPI: DSDT BFEF1000, 7745 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: FACS BFE93000, 0040 +------+ ACPI: HPET BFEFC000, 0038 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI : APIC BFEFB000, C 006 (TOSINV TOSINV00 1 MSFT 1000013 r2) +------+ ACPI: MCFG BFEFA000, 003 c (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: ASF! BFEF9000, 00A 5 (r32 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: SLIC BFEF0000, 0176 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: BOOT BFEEF000, 0028 (TOSINV TOSINV00 1 MSFT 1000013 r1) +------+ ACPI: SSDT BFEEE000, 0655 (r1 PmRef CpuPm 3000 20051117 INTL) +------+ ACPI: DMI detected: Toshiba +------+ ACPI: PM - timer IO Port: 0 x 408 +------+ ACPI: address Local APIC 0xfee00000 +------+ ACPI: LAPIC (acpi_id [0 x 01] lapic_id [0x00] activated) +------+ ACPI : LAPIC (acpi_id [0x02] lapic_id [0x01] activated) +------+ ACPI: LAPIC (acpi_id [0x03] lapic_id [0x00] disabled) +------+ ACPI: LAPIC (acpi_id [0x04] lapic_id [0x00] disabled) +------+ ACPI: IOAPIC (id [0x04] address [0xfec00000] gsi_base [0]) +------+ ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) +------+ ACPI : INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 level) +------+ ACPI: IRQ0 used by substitution. +------+ ACPI: IRQ2 used by substitution. +------+ ACPI: IRQ9 is used by substitution. +------+ ACPI: HPET id: 0x8086a201 base: 0xfed00000 +------+ Using ACPI (EMAC) for SMP configuration information +------+ ACPI: Core review 20080609 +------+ ACPI: looking for initramfs Custom DSDT +------+ ACPI: bus type pci registered +------+ ACPI: EC: pick up at CBS in the DSDT +------+ ACPI: _OSI (Linux) ignored by DMI BIOS query +------+ ACPI: active interpreter +------+ ACPI: (supports the S0, S3 S4 S5) +------+ ACPI: IOAPIC using for interrupt routing +------+ ACPI : EC: non-query interrupt received, switch to stop mode +------+ ACPI: EC: Storm detected GPE, transactions will use polling mode +------+ ACPI: EC: GPE = 0x16, I/O: / order = status 0 x 66, data = 0 x 62 +------+ ACPI: EC: pilot started in interrupt mode +------+ ACPI: PCI [PCI0] root bridge (0000:00) +------+ ACPI: PCI Interrupt Routing Table [\_SB_. PCI0._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. P32_._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP1._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP2._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP5._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. PEGP._PRT] +------+ ACPI: PCI interrupt link [INKA] (IRQ 3 4 * 5 7 9 10 11 12) +------+ ACPI: PCI Interrupt Link [LNKB] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI interrupt link [LNKC] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI Interrupt Link [LNKD] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI : PCI Interrupt Link [LNKE] (IRQ 3 4 5 7 9 10 11 12) * 0, disabled. +------+ ACPI: PCI Interrupt Link [LNKF] (IRQ 3 4 5 7 9 * 10 11 12) +------+ ACPI: PCI interrupt link [LNKG] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI interrupt link [LNKH] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: power resource [FN00] (on) +------+ pnp: ACPI PnP init +------+ ACPI: type pnp registered bus +------+ pnp: ACPI PnP: found 8 devices +------+ ACPI : Type of non ACPI pnp bus +------+ PCI: use ACPI to IRQ routing +------+ ACPI: RTC may wake from S4 +------+ ACPI: [fan] (on) +------+ ACPI: SSDT BFD77C18, 026 (r1 PmRef Cpu0Ist 3000 INTL 20051117) B +------+ ACPI: SSDT BFD75598, 0537 (r1 PmRef Cpu0Cst 3001 20051117 INTL) +------+ ACPI: CPU0 (power States: C1 C2 [C1] [C2] C3 [C3]) +------+ processor ACPI0007:00: registered as cooling_device1 +------+ ACPI : processor [CPU0] (supports 8 throttling States) +------+ ACPI: SSDT BFD76E18, 01CF (r1 PmRef ApIst 3000 20051117 INTL) +------+ ACPI: SSDT BFD77F18, D 008 (r1 PmRef ApCst 3000 20051117 INTL) +------+ ACPI: CPU1 (power States: C1 C2 [C1] [C2] C3 [C3]) +------+ processor ACPI0007:01: registered under cooling_device2 +------+ ACPI: processor [CPU1] (supports 8 throttling States) +------+ ACPI : transition device [FAN] to D3 +------+ ACPI: thermal Zone [THRM] (44 c) +------+ ACPI: Power Button (FF) [PWRF] +------+ ACPI: Power Button (CM) [PWRB] +------+ ACPI: lid switch [LID0] +------+ ACPI: battery [BAT0] (battery present) +------+ ACPI: AC adapter / CC [ADP0] (online) +------+ peripheral acpi: 1B: registered under cooling_device3 +------+ ACPI: Video Device [VGA] (multiple heads: Yes Rome: no message: no) +------+ iwlagn 0000:03:00.0 : state changes by ACPI to D0 + power------+ ACPI: WMI: responsible Mapper +------+ iwlagn 0000:03:00.0: state changes by ACPI to D0 + power------+ ACPI: EC: lack of confirmation, cut the interrupt mode. +

• Impossible to install any program because not supported under Vista, but my PC is Windows 7 Pro 64-bit

  I try to install Rockwell Automation Studio 5000, but I get an error message saying "Studio 5000 is not supported on Windows Visa without Service Pack 1 or higher". However my PC is under Windows 7 Pro (64 bit) and Vista that is covered by the requirements of this program.

  Any ideas?

  What is the version number of Studio 5000 you have?

  You can try to install using the "compatibility mode".

  What is program compatibility?
  Program compatibility is a mode in Windows that allows you to run programs written
  for earlier versions of Windows. Most programs written for Windows Vista are also running Windows 7,
  but some older programs might run poorly or not at all.
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  Compatibility mode - make sure to run older programs in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Windows 7 Compatibility Center
  See if your software or hardware is listed and what options you have

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Learn how to use the Mode of Windows 7 compatibility with legacy applications

  http://Lifehacker.com/5466628/learn-to-use-Windows-7s-compatibility-mode-with-older-apps

  Using Windows 7 or Vista Compatibility Mode

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Also: http://www.sevenforums.com/tutorials/1196-internet-explorer-compatibility-view-turn-off.html

  J W Stuart: http://www.pagestart.com

• Changes in prices for the contracts of Support for Cisco IDS/IPS

  Nice day

  My boss asked me if there is no value added regarding Cisco's recent move to charge separately for hardware and software support for IDS/IPS product line.

  Other than what is obvious (need software support for updates of signature, need of material support in case something breaks), I'm having a hard time to provide a response.

  Can anyone suggest what is the increased value, other than annual recurrent costs more we get as a result of this change of license?

  Also, was there any release press or other notice to the client about this change?

  I am at a loss...

  Alex Arndt

  Alex,

  Cut through the spin and the hype... the software support allows us to finance a development team dedicated to signature, which has improved our signature rejection rates and response times. In addition, it is allowing us to expand our coverage to keep IDS 4.1 to get the support of the signature. It is contrary to our previous policy which would have seen 4.1 updates to signature cut shortly after 5.0 released.

  A side effect of this is that our development team is now free to focus on the development of the feature, and you will see more updates, more often.

  Can't comment on press releases and others, they make your head spin my ;)

  Scott

• How to pair a Bluetooth stylus taken supported by Photoshop Mix?

  I can't find the answer to this question apparently simple anywhere! I have a stylus "fiftythree pencil", which is supposed to be supported by mixture of photoshop. However, I can't find where in the application I can sync it with my iPad Air. with other applications that support the pen, there is usually a place under preferences, or stylus specially designated tab where I can do. But not so on photoshop blend. Please enlighten us on this seemingly obscure issue, as I searched for hours on end in line and inside! the app does not. Thanks in advance.

  Hi camilomf!

  I apologize for the inconvenience, which is really frustrating. Unfortunately, there is no support for the stylus bluetooth with Mix. The only pen that I know of which is supported is the pencil of Apple on iPad Pro. I hope that more support stiletto will come in the future. If you want to share this feature with team request, please press on "give us feedback" in the application menu (press the Mix icon in the upper left corner of the application and you will see the link).

  Let me know if I can help you with anything else!

  See you soon

  -Kathleen

• I bought the subscription for photoshop cc but missing touch support under experimental preferences option.

  I was told to support cat affecting support did not appear in the trial of cc of photoshop.  I bought a subscription and it's still not there.  When I contacted support on this issue, they said it would not be there until the payment has been processed.  After payment is processed, I uninstalled and reinstalled but it's still not there.  I'm running a Windows Surface Pro with windows 8.1.

  In photoshop under Edit > Preferences > Performance, you CPU graph use checked?

• The sim card that you are currently installed in this iPhone is a carrier that is not supported under the activation policy that is currently affected by activation serv

  The sim card that you are currently installed in this iPhone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server...

  Can anyone helpe me...? My phone is locked to O2, but since June 2013 is factory unlocked. Contact O2 for more information, and the answer was: "is everything okay". My phone is now unused, but the sstrange thing is that I can receive phone calls

• Satellite M100-164 button special support under Vista

  Hello

  I am a happy Satellite M100-164 (M100 (PSMA0) owner and I recently changed the old Windows XP mode with windows Vista (32 bit). Almost everything works perfect... except 6 multimedia keys ;) I downloaded the [last drivers "Support Button" | http://se.computers.toshiba-europe.com/innovation/download_driver_details.jsp?LNG=26&service=SE&selC fulltext = 2 & selFamily = 2 & selSeries = 161 & selProduct = 633 & selShortMod = 461 & language = 13 & selOS = 26 & selType = all & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & count ry = all & selectedLanguage = 13 & type = all & page = 1 & ID = 5636 6 & DISO = 26 & driverLanguage = 42] but I am obviously missing something because I can't make the buttons work :)

  The only description for divers is:

  Allows you to customize and TOSHIBA special button preset settings.

  And it's inside the packaging - http://img147.imageshack.us/my.php?image=01wk9.jpg

  When I run the exe, I get this - http://img80.imageshack.us/my.php?image=02ve5.jpg

  but when I restart, there is no change in the situation ;)
  My best guess is that I need to put the files somewhere, but currently my crystal ball does not work :)

  Any ideas? Anyone?

  Maybe the drivers and in particular tools and utilities installed in the order of poor facilities. I have installed Vista on old WXP preinstalled A100 using this command of facilities:

  Windows Vista
  TOSHIBA Value Added Package
  Chipset driver (if not available installation driver display only)
  Display driver
  Flash Media Driver
  Luxpad & Driver TouchPad Synaptics
  Realtek Audio Driver
  TOSHIBA software modem
  LAN driver
  Wireless LAN Driver
  Bluetooth stack
  Bluetooth monitor
  Fingerprint software
  TOSHIBA hardware setup
  TOSHIBA supervisor password
  TOSHIBA SD utilities
  TOSHIBA Assist
  TOSHIBA ConfigFree
  Support Button

  And so on.

  Try please install Vista to new und follow this order of installations.

• Windows 2008 R2 server taken supported HP printers

  I need an HP printer that supports Windows Server 2008 R - II, pls tell me where I can get that.

  Hello
   
   
  Your Windows questions woule be better suited in the TechNet forum.  I suggest you to send your request in The Forum Windows Server Print/Fax
  http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads
   
   

• Software print all-in-one HP Officejet J4550 not taken support in Windows 7

  I get a software error when I or Windows 7, try to install the printer drivers and the control software which says that the software is not supported in this operating system. Went to the HP site and downloaded the 64-bit software (installed 64-bit system) and it came with the same error. Is there a solution to this problem or is it being developed?

  See how this isn't the final version of Windows 7, I'm sure that a lot of material will not work at the moment.
  One thing you can 'try' is the 32-bit version of the drivers instead of the 64-bit... ;)

• No DVD or Blu Ray player support under Windows 7 64-bit

  Windows 7 64 bit can't see any of my DVD or Blu Ray discs. I tried to delete the registry and uninstalling, but I still have a yellow cation in Device Manager. I did this for weeks now, without help of LG, I like windows 7, but as every PC, it is not just until the side is turned off and your under the hood. I guess that's why I have 4 Mac now. Please help Microsoft. The current CD-Rom driver's 2006

  Concerning

  
  Robb

  
  

  Hey!  I have just fixed after three weeks!

  The answer is to download the appropriate driver chipset Intel Matrix Storage Manager.
  Go to: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Chipsets&ProductLine=Chipset+Software&ProductProduct=Intel%c2%ae+Rapid+Storage+Technology
  Select Windows 7 version, 64-bit, download, restart and driver LG blu ray is then installed successfully.
  I hope it works for the other readers of your too.

  Arnie