iPad is computer "Not supported" on bluetooth

Similar Questions

• 3.70 BIOS update for model ptm50e Tecra M5 says this computer not supported

  After you download an update of the BIOS for my Tecra M5 PTM50E model when I try to install it, says this computer not supported and yet it was obtained from the download page of Toshiba for my model? Also said the Management Console download also machine not taken in charge when I try to install that?

  Can anyone help?

  Hello

  I agree with Akuma
  The common Modules must be installed before you attempt the update of the BIOS.
  The common Modules is an essential component of Windows systems.
  It is required to TOSHIBA's other original programs to work properly, as the update of the BIOS!

  Welcome them

• With the help of Excel files on my iPad Pro: content not supported

  I downloaded from my Windows laptop, 10 some Excel 2016 files in Microsoft OneDrive.

  When I try to open these files on my 12.9 "256Go LTE iPad Pro I get the following message from Office 365 Excel:" content not supported this document contains content not supported. " To modify a copy with this content, double tap.

  This happens regardless of what file download. Is there a default setting in my PC Excel file that causes this error? What can I do to prevent this?

  As soon as I get to a place where I have 4G LTE, I'll try to upload a blank Excel spreadsheet to OneDrive and try to open it on my iPad Pro.

  Any help is appreciated.

  What type of excel files are these (xsl, xlsx, xslm)?

• Update BIOS of 1, 70 - WIN on Satellite Z830-10 t - computer not supported

  Hi all

  I am installing the update of the BIOS 1, 70-WIN of 09/12/12, delivered in a folder called "bios-20120907140253', unsuccessfully zip.

  Whenever I run the .exe file, I get "this computer is not supported" returned in BIOS Toshiba package Ver.4.2.1 window.

  My laptop is PT22LE-00E004EN.
  Software from Toshiba Tempro advised me to install this BIOS update.

  Is that what someone else has this problem, and is there a solution?

  Thank you

  Rob

  In my opinion, you need not update the BIOS, even if the new BIOS has been updated.
  I have a laptop works perfectly with the old BIOS and I don't have day to a newer version, even if the new updated released

  However, I found really interesting thread with a solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=66787

  Here's another thread with the same error message:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=68345
  The solution-> retrieve the laptop initial configuration by using disk HARD recovery and try again.

  PS: do it before this try reinstalling the VAP

• Cannot get TV to computer (not supported mode). What can I do?

  COMPUTER CRASHED HAD TO REINSTALL THE OPERATING SYSTEM NOW MY TV DOES NOT WORK WITH YOUR COMPUTER AND TESTED SOUND DEVICE IS WORKING PROPERLY, TV SAYS MODE NOT SUPPORTED PLZ HELP

  original title: CANT GET TV TO WORK WITH COMPUTER (MODE NOT supported) which CAN DO? USE OF IT TO WORK

  Update your graphics card driver. Visit the manufacturer's Web site to download and install the latest version of the graphics driver graphics card.

• My computer won't recognize bluetooth headset! Error message 'Discoverablilty and connectivity settings were not saved' and 'Bluetooth Exchange folder is not found' by changing the properties of bluetooth

  Original title: my computer won't recognize bluetooth headset!

  When I checked "Allow bluetooth devices to find this computer" under the "Option" menu, I got the error message "Discoverablilty and connectivity settings were not saved. Another message error I got is "Bluetooth Exchange folder is not found".  Although I copied this file from my backup data files, the problem still exists.

  I used to use able to connect to my computer with the headset.

  Please advise me what I have to do.

  Hi Venturer016,

  Remember to make changes to the computer before this problem?

   

  Method 1: You can follow the steps mentioned in the link below

  The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Bluetooth is not supported by any version of windows servers... what exactly does that mean?

  I am trying to set up a bluetooth connection between my mobile (Nokia X 6) and the new Acer lap top of page that is running windows 7.  In the past, when using Vista and my Samsung phone it was easy through "control panel."  With this new Windows7 however, it does seem to be an option to set up bluetooth.  There is however "help" a section ' how to set up bluetooth or other wireless connections, which begins by saying that you can transfer information via bluetooth and other wireless means, he then goes on to describe these "other" methods wireless, adding a note that "Bluetooth is is not supported by any version of windows server.  The lap top itself has a long side button Wi - Fi bluetooth button, which don't "turn on" or turn on when I press on it.  I'm not very technical interest and just use the computer for my music and photo organizing and other simple functions.  Apologies if it sounds ridiculous, but I think I'm getting conflicting information, is always available for use with windows bluetooth 7, if so does that mean say "he is not supported by windows servers?  I just want to know if I forget something really obvious or if I should stop trying altogether with all bluetooth and focuss on other file transfer methods?  All the advice in plain language or pointing me in the right direction will be so appreciated, thank you very much Frances

  Turn off the laptop and look at the bottom of this one.  If it doesn't have Bluetooth installed, there will be a white sticker with BLUETOOTH printed on it.

  You don't have an edition of Windows Server.  Those who would be Windows Server 2003, Windows Server 2003 R2, Windows Server 2008 and Windows Server 2008 R2 and a bit like Vista and Windows 7, they come in many varieties, Web, Standard, Enterprise, data and 32 and 64-bit editions.

  When you go into the Control Panel, you see an icon for Bluetooth?  Bluetooth does appear in Device Manager?

• Tecra M10 - update of the BIOS says "this computer is not supported.

  Recently refurbished a M10 - 10I to reinstall the operating system. WinXP install at all so I try to update the BIOS as it seems quite old (V1.5). Most recent version (and is available) for this machine seems to be V3.0. Download and try to run the file "P0065V300" and get the message:

  Package for the TOSHIBA BIOS ver.3.3.0
  This computer is not supported

  What can I do? Its supposed to be for this model!

  Also, prefer a version of boot drive, but hey, I can use a version of Windows, assuming that it runs on Win7.

  Hello

  Tecra M10 - 10I belongs to the series of PTMB1E and according to the page of the Toshiba UE driver, BIOS v3.00 - WIN is the latest BIOS version which is available for this model.

  The BIOS update requires a few additional tools Toshiba as VAP (additional package for Win 7)

  If this driver isn't installed, the update of the BIOS would not work.

• Tecra R10 - 10J: BIOS update abandoned "this computer is not supported.

  Hello

  My laptop is a Tecra R10 - 10J PartNumber PTRB1E-00D002FR, 1.40 BIOS version 11/13/2008.

  I recently bought and installed two modules of 4 GB RAM (8 GB). Enter the BIOS setup, I found 8 GB. Windows 7 64 bit also detects the 8 GB, but uses only 3.80! MemTest and diagnosis of CPU - Z are good for all of the 8 GB. I went from RAM modules from one location to another, but nothing has changed. If I replace a module of 4GB by a 2 GB memory, Windows 7 uses 5.80 is going well. Same result as any module of memory of 4 GB or slot I use.

  I suppose that problem comes from the BIOS. The 1.40 version does not support memory mapped IO functionality.

  So I followed the instructions on "http://fr.computers.toshiba-europe.com/innovation/?download_drivers_bios.jsp?" to find the last good package to update BIOS for Tecra R10 - 10J. I downloaded and ran the BIOS310?. exe, but received the error message "this computer is not supported"?

  Can someone tell me how to upgrade my BIOS or did someone has a better idea to activate the full 8 GB of RAM support?

  Thank you for all!

  Axel Limousin

  Hello

  You must install the VAP (value added package) or if this package is already installed, you must reinstall/upgrade to update it.

  Disable the Antivirus software and disable things of security such as firewalls etc.

  Hope that you're lucky...

• Many of my modules are not supported by version 5. I don't want to spend hours on this hunt. I want just the version 4 and stop Mozilla automatically update my computer to v5.

  Google toolbar, etc. are not supported. You have completely disturbed how I do business. I use Internet Explorer at the same time to what you provide me a way to return to V4 and stop upgrading my computer. Not been appreciated.

  Can you please mark it as resolved? Thanks, glad it worked

• Re: update the Bios Z830 Satellite: "this computer is not supported.

  Hello

  I replaced the Windows preinstalled with an installation of Fedora 16, - which works perfectly btw - and hope
  to solve the "Windows only Bios update problem" with a Windows 7 bootable USB drive, which works again
  great so far, but the BIOS160_EC130_WIN.exe said simply: "this computer is not supported." ...

  Any ideas appreciated.

  Bernd

  Hello

  You cannot update the BIOS under Linux and using a victory based version of the BIOS.
  You will need to use the image of preinstalled Toshiba.

• Tecra A10 - 12 H - update BIOS: "this computer is not supported"

  I need to upgrade the BIOS v 1.60 to the latest version of the BIOS. I downloaded from the site of Toshiba bios file (bios - 20091103164158.zip-> P0065v300.exe), but when I try to update comes this question:

  TOSHIBA BIOS PACKAGE VER 3.3.0
  THIS COMPUTER IS NOT SUPPORTED

  My laptop:
  TECRA A10 - 12H
  PTSB1E-01E003IT
  Windows 7 32 bit

  Hello

  Have you installed the VAP (value added package)?

  The VAP is necessary in order to run the BIOS update and Toshiba tools.
  I found a son with the same error message, but the user is using Win XP.

  The problem could be solved by the installation of common Modules (only for Win XP).
  But the VAP is released for Vista and Win 7 and common modules are in the VFR package.

• Tecra R840-PT429E - update Bios message: this computer is not supported

  When I try to install the bios update 12/09/12,3.90-WIN(EC_KBC1.60) I get the following message: this computer is not supported.
  Updated the BIOS, I downloaded from the section of the Bios Toshiba for Tecra R840-PT429E update, windows7 64 bit.

  Hello

  Is the a reason to update the BIOS or you want to update the BIOS simply because the new BIOS is available?
  You have a serious problem with the laptop?

  I have no day BIOS, even if the new BIOS is available for my laptop because I have no problems.

  However, the BIOS requires the VAP (value added package).
  This package can be downloaded from the Toshiba UE driver page
  If there is a problem with the VAP, the update of the BIOS would not start.

  So reinstall the VAP to check if this may help

• updated my iPad to 9.3 air activate iPad display does not not my account information, but the Mac computer accepts my Apple ID and password

  updated my iPad to 9.3 air activate iPad display does not not my account information, but the Mac computer accepts my Apple ID and password

  A lot of people is affected by this problem, and Apple has worked on the issue.  Some found the following steps useful for this issue:

  Go to iCloud.com and select settings once you are connected.  Click on your device listed there and remove them from the account (not typing not erase or lost mode).  Restart your device and must ignore this lock of Activation screen because you actually disabled the lock by removing the device for iCloud.com

  I hope that helps!

• Qosmio G30-126 - update Bios message: this computer is not supported

  When I try to install the bios update, I get the following message: this computer is not supported.
  I use win xp pro sp2 and the update of the Bios I downloaded from the Bios Toshiba Update section.

  You try to update the BIOS that is not designed for this laptop!
  If you want to perform an update of the BIOS make sure the BIOS is fully compatible with your notebook series and good!

  Notes; bad BIOS or bad BIOS update procedure can damage the module ROM!