SSM-10 real-time monitoring

Similar Questions

• Cams has supported to post real-time monitors?

  Hello

  I was watching the camileo cams.
  Supports any one of them hang a direct on an external monitor
  NOT for playback of recorded images, but as a _live_ extract. (even if not recording)

  If the TV cannot, which cam can? =)

  Thank you!

  Hello

  I have a Camileo H30 and this camcorder supports a mini HDMI output port.
  I have that could directly connect to my external monitor and got a video output directly on the monitor.

  I think that any other camcorder with a video on the port (HDMI, etc) would support such feature

• Is the reference monitor in real time?

  I never asked this before, but is the reference in real-time monitor?

  The behavior I get is...

  frames to update when I rub

  shows the color changes

  freezes when I plate the SEQ

  He always did, but I was wondering what he could play simultaneously with the following. Its video composite value now.

  Unfortunately, you can't direct the program playback and screens of reference at the same time.  It's a design flaw, in my opinion, which greatly limits the usefulness of the reference monitor.  Please tell Adobe you want to correct.

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• monitor thread on the system in real time

  I have a SMU-8101 controller in my PXI system. I have it running with a system of operating in real time. I inherited some software WHICH has been used on a program of LabWindows used on a PC with a Windows 7 operating system. The SOFTWARE seems to work OK. My problem is when I leave the program I get an ERROR of EXECUTION NOT DEADLY

  "

  Source position thread ID unknown 0x000000EC

  Your CVI program ended on the target in real time. However, there still on the target in real time, the threads that are running or have already run the CVI code.

  Please check that your application cleans all its threads. Son left running after that your application can crash the target in real time when your application is unloaded.

  "

  As I said I got the code and there is a lot of it. I am looking for a smart way to track down these threads. I was wondering if there are tools available that could help with this? Or any other suggestions on how to run these lines down?

  Hi DPearce,

  This article knowledge base has some information on why CmtDiscardThreadPool causes your program hang and gives some recommendations for fixing it.

• Real-time System Manager

  Hello world

  How can I open real-time System Manager to monitor on my project of myRIO resourses?

  I've already activated the VI server on the target.

  If I select Tools-> real-time Module I find only "Project Wizard", "set up Time-triggered network" and "viewer of Trace".

  Thank you in advance,

  Lorenzo

  The "Distributed System Manager" is an application/executable separated - you can find it, if installed, on the start menu under the folder "National Instruments". If it is not there, then you probably have installed as part of your installation - raise your LV Installer and choose to install.

  Alternatively, you can use the System Configuration API to read the various parameters (e.g. CPU / memory) on the target itself to monitoring the health of the system.

• Continuous data acquisition and real-time analysis

  

  Hi all

  It is a VI for the continuous acquisition of an ECG signal. As far as I understand that the analog read DAQmx VI must be placed inside a while loop so it can acquire the data permanently, I need perform filtering and analysis of the wave in real time. How I implemented the block schema means that data stays int the while loop, and AFAIK the data will be transferred on through the tunnels of data once the loop ends the execution, it clearly isn't real-time data processing.

  The only way I can think to fixing this problem is by placing another loop that covers the screw scene filtering and using some sort of registeing shift to transmit the data in the second while loop. My question is whether or not it would introduce some sort of delay, and weather or not it would be supposed to be the treatment in real time. Wouldn't be better to place all the screws (aquicition and filtering) inside a while loop? or it is a bad programming practice. Other features I need to do is back up the data I na file, but only when the user wants to do.

  Any advice would be appreciated.

  You have two options:

  • A. as you said, you can place the code inside your current while loop to perform the treatment.  If you're smart, you won't need to put one another while loop inside your existing (nested loops).  But it totally depends on the type of treatment that you do.
  • B. create a second parallel loop to perform the treatment.  This would be separate processes to ensure that the treatment is not obstacle to your purchase.  For more information, see here .

  Your choice really depends on the transformation that you plan to perform.  If it's much the processor, this could introduce delays as you said.

  I would recommend that you start at any place in the first loop and see if your DAQ buffer overruns (you can monitor the rear of the buffer during operation).  If so, you should decouple the process in separate loops.

  In what concerns or not ' it would be considered as real time processing ' is a trick question.  Most of the people on these forums say that your system is NEVER in real time because you're using a desktop PC to perform processing (note: I guess it's the code that runs on a laptop or desktop?).  It is not a deterministic systemand your data is already "old" by the time wherever he leaves your DAQ buffer.  But the answer to your question really depends on how you define "real time processing".  Many lay it will set as the treatment of 'live' data... but what is "actual data"?

• Starting process in real time

  I have 2 questions related to LabVIEW Real-time. I'm using LabVIEW 2010 Service Pack 1. We have a PXI-8186 controller running the embedded real-time.

  (1) I have my software written to communicate using TCP/IP. The real time software runs the listener 'TCP create' then the 'wait on TCP listener"to look for the connections of the computer. This works well in the LabVIEW project. I then build the executable and deploy it in the system in real time, set up to run during startup. I put the target name to be my program name "Test program.rtexe" rather than "startup.rtexe". I don't know if that makes a difference. I saw the other files in the startup folder of the system in real time that have been named something else. My questions are: the name possible no matter what name we want and the system in real time all programs contained in the startup folder is running or is there another method to specify the programs to be executed?

  (2) is there a way to monitor or to see what programs are running on the system in real time? As the the Task Manager on a windows system. The reason I ask, is that after I restart the PXI system and without using the program of project, I can't connect to my test program running on the system in real time. I don't know if the software is running on the system in real time, is it established that the network interface which it was assumed, etc. to determine why I can not connect with him. Any help on various methods to determine if the software actually runs would be useful.

  Thanks for any help you can give.

  Bill

  Finally found the problem.

  It would seem that, at least in the 2 controllers shipped we have there, controllers have a flag in the BIOS that allows you to disable the file to begin execution on the system in real time. Once I put the flag on the 'NO', everything works. The flag is named:

  'Disable the boot VI' tab 'LabVIEW RT"in the BIOS.

  It is a good option if the boot VI is damaged or was not debugged prior to deployment.

• Is there a tutorial for creating executables in real-time?

  I have the code in real-time which works OK in LabView (not the final version no doubt but I need to learn two or three other things as well).

  Now, I would like to create an executable file that I would run on some PCs with some inside monitors and control.

  I found little exercise on the development of Application (shortly): 1) create shared variables) 2 create a copy of the Vi that works and to replace the controls and monitors in it with static variable) 3 Windows creating welcome 4 VI) probably create an executable after that (step not described in the exercise).

  I'm currently stuck at step 3 with the 1950679035 error.

  Looks like a well known error, but I found no solution yet.

  My question is: which is the right way, I'm moving to? Or there is another way to create applications with control and monitoring of the device in time real NIcRIO 9072?

  Sergey.

  Hi Sergey,

  Glad to hear that you are making progress.

  And all you need to do now is create the façade in the same way that you would create a normal .exe file.

  Here is a link with tips on how to create front panels: (web-based)

  http://digital.NI.com/public.nsf/allkb/7F95D43D3F50FCAC8625710E000068E1?OpenDocument

  http://digital.NI.com/public.nsf/allkb/7FEE6BCFD264175C8625723E000D928E

  There are other links on the bottom of these pages.

  Kind regards

• a pc with a stand-alone module, real-time can display of its own data

  Hi all

  It is sort of a basic question, and it's probably why I can't find the answer explicitly in textbooks or the forum posts.

  If I want to use a PC as a unit in real time, and I install the LabView time real OS on it and make an Application of real-time on another machine and compile it in the PC target in time real LabView, can I attach a monitor or a kind of screen directly to the PC unit in real time to display some data I need?  Or do I still need a Labview PC to act as a host for display data and interface with a user?

  Thanks for the info!  I have some experience of labview, making some other applications but I have never used the RealTime module yet so I don't know much. So if there is a good place for more information in time real LabView for use a PC as a device target, which may also be of interest and would be appreciated!

  Thanks again.

  Steve

  Hi Steve,.

  Our objectives in real time are designed to work in headlessly, which means that they are independent and have no user interfaces.  It comes to screens.  For a display of information, you must use a host VI, on a host computer. There are several ways to move data between a target RT and a host PC including, but without limitation, TCP, UDP, network flow, published static Variables of network and Web Services.  These are all covered in documents on best practices.

  Here is a page real-time best practices:

  http://zone.NI.com/reference/en-XX/help/370622J-01/lvrtbestpractices/rt_portal/

  Here's a page on the conversion of a desktop computer to a target RT:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/2733

  Good luck with your project.

• Video output for PXI embedded real-time?

  I plan to buy a controller PXI real-time Embedded for security monitoring.

  Is it possible to use the video output of a controller PXI running RTOS to display a LabVIEW RT application messages? According to the literature, it seems that the use of the video output is more possible for Controllers PXI running Windows XP.

  Is there a specific application with LabVIEW RT?

  Thanx.

  H.L.

  Well, it works using the IMAQ RT video Out VI: images are displayed properly via the video output of the RTOS PXI controller running.

  Thanx.

• Leak memory in real time caused by VISA Read and timed loop of data nodes? Is not supposed.

  In collaboration with LV 8.2.1 in real time to develop applications that monitor or emulate computers on bus RS-422.   The following screenshots have been taken an application that monitors a transmission of 200 Hz.  After a few hours, the PXI station would break a range impressive messages angry... most involving something about memory loss.  After much hair pulling and passing money, my partner has discovered while looking at the available memory on the controller of loss of memory occurred at each loop containing a VISA read and propagation of error using the data nodes (see Leak.jpg of memory).  He concluded that if he went to the propagation of the error to the regular old shift registers, then the available memory was rock-solid.  (has the Leak.jpg of No memory)

  Any ideas of what could be the cause?  Do you see not any problem with the way that we code these kinds of loops?  We always strive to optimize the way in which we use the memory on our urgent requests and VISA readings and DAQmx bed give us the heartache more than ever, we are able to allocate memory for these screws some tips?

  Dan Marlow

  GDLS

  Hi thisisnotadream,

  This problem has been reported, and you seem to be exactly reproduce the conditions required to see this problem. This was reported to R & D (# 134314) for further investigations. There are several possible solutions, of which one is the one you have already found the wiring error directly in the loop. Other situations which give rise to no memory leak are:

  1 if the bytes of the property node port is not there and has read lies in each iteration and time-outs resulting are ignored.

  2. If the structure of the deal is gone and just blindly check the bytes to the port and read each iteration.

  3. If the timed loop is transformed into a while loop.

  Thanks for the comments!

  Kind regards

  Stephen S.

• Is there a way to know what physical events are happening in real time?

  I just had a problem from my phone since last week. I wouldn't do something unusual. Knows running programs with regard to my knowledge and visible only windows are concerned. And my hard drive would be thrown open. I don't know which program is the cause. So I asked for help in the windows event viewer and look under hardware events because that's what I thought would contain the event in question. but it was empty.

  I'm here to ask you all, if anyone can help in this regard.

  Amit

  Hello

  Check these:

  Scenarios selected for monitoring performance with Windows Vista
  http://TechNet.Microsoft.com/en-us/library/cc748962 (WS.10) .aspx

  This free utility makes it easy to check the event logs - since you can check everything
  entry in the final minutes or other periods of time. Any or all of the event logs can be saved
  then deleted to make it easier also for future entries to read.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  z http://www.Nirsoft.net/utils/my_event_viewer.html

  =======================================================
  
  Sysinternals has utilties that can help such as Process Explorer, Process Monitor and others. Those
  and others are below.

  This is a pretty complete performance convenience store and a lot of these methods will contribute to
  your effort.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• 5 Lightroom Develop module does not display the changes in real time - locks on original image

  After almost a year of using Lightroom 5 (Version 5.7.1) with no problem there now will not show changes/changes I do them in the main view of the magnifying glass.  The image on the film down changes.  The Navigator view darkens, once a change is made.  If I I have the active secondary monitor it will show the changes in real time (because of the quality of the secondary monior I do not use it for changes).  If I go back to the magnifying glass library display changes to develop module are shown.  I can also make do and discover tiem real changes in the Librrary module in the quick develop Panel. IF I come back to the develop Module updated (edited) image but more it is stuck on this image in the Loupe view.   I suspect strongly I accidentally made some key race in the error that created this situation, but I can't really pinpoint exactly when this problem occurred are contiguous 5 days ago.

  The problem persists with any image.  I tried several images - old and new.  The only software or any other change that I have introduced in the last 30 days was Piccure + 30 days ago.  I later have it removed as a precaution.  No change has resulted.  I took additional measures include 1) Reseting preferences (twice), 2) reinstall the software twice, the second time I deleted all the files of supported / presets except the current catalog and 3) I have used backup catalogs as well dating back to the period of time, well before the problem appeared.  I am running Windows 7 Professional with Service Pack 1, 64-bit OS

  Any suggestions greatly appreciated.  I feel like I'm under low on things to try.  Thanks - Jeff

  This could be caused by a defective monitor profile.

  As a diagnostic tool and possibly a temporary solution, try to set the monitor to sRGB profile.

  Go to control panel > color management and define the sRGB as the default profile.

  If this solves the problem, you should ideally calibrate your monitor with a standard material.

  

• Overview of RAM is no longer real time

  Work computer.   Mid-2010 Mac Pro with 64 GB of RAM.  Version 11.0.4.2 running After Effects.   Multiprocessing turned off.   V3 AJA Control Panel.

  1920 x 1080 comps, 29.97 FPS, no 3D.

  The Mac was running RAM previews and Mountain Lion were BEAUTIFUL.  Questions to zero.             Never.

  The computer has been upgraded to the Mavericks 10.9.5.      I use the upgrade of the vague term, BTW.       Now...  RAM previews play more in real time.  Plus I get - it fluctuates - is 19, 20, 23 frames per second, never 29.97.    Sometimes he hits all the way up to 40, 45, 47, as he plays catch-up, but this is rare.

  -Restart the computer. No change.

  -All projects.   Makes no difference, old existing or new projects.

  -Even a simple projects 1-layer with simple position animation, no effect - not in real time.

  -8 bit, not only 16 or 32-bit mode.

  -Color on and outside management.

  -Simulate the output on and outside.

  -Preferences-> video preview has been updated AJA, so I tried only computer monitor.  It does not either.

  -Full ground, half, quarter.... is not serious.    Never in real time.

  I've seen others ask to this subject, but none of the positions ever trained 'you need to set 'this' to 'who',' etc.        Have any suggestions?

  Thank you

  Marc

  Have you tried to uninstall the drivers of the AJA?

• Update of the pixel in real-time data

  Hello

  I look at the options for the implementation of a real-time filter feature in photoshop, and I would like some opinions on implementation strategies.

  Basically, I want to update the contents of a layer (lets call it B) when the user draws another layer (lets call it only A), such that the contents of the layer B is a function of a.

  This task will be possible using the functionality exposed by the Photoshop SDK?

  Cordially Toke

  Theoretically, it could be doable, assuming that the tool used to change events appropriate b triggers (only not all tools, unfortunately) AND your A layer updates can be performed without disrupting the work of user b. What you need to do in this case is to implement a plug-in automation based on the earpiece of the SDK samples that would monitor events. At the event you determine the layer to activate it in your code C++ and if B then update has. The problematic part here would be whether you would be able to change the current layer in a way that is not interrupting the work of user b (for example, you probably wouldn't occur a change b to change the current layer to A, which would cause the focus jump to A and then go back) and it would depend of the type of changes you want to.

  It would in any case, the branch, I would like to take here.

  HTH

  Ivar